Hire the best Analog Electronics Specialists in Surat, IN

Check out Analog Electronics Specialists in Surat, IN with the skills you need for your next job.
  • $25 hourly
    Being a hardware designer and PCB designer with more than 7 years of expertise, I had worked on numerous hardware designs and development projects. I had created PCB designs, IoT, ASIC, FPGA, and microcontroller-based hardware that was space qualified. Here is a list of specific fields of expertise applied to my latest projects; - Microcontroller, SoC, and Control modules. - Analog/Digital interfaces: I/O, ADC, DAC, PWM, Comparator. - Communication ports: SPI, I2C, Serial, SDI, MIPI, IR, HDMI, SATA. - Power Supply Design: Linear, LDO, Switching Buck/Boost. - RF up to 2.4GHz. - IoT sensors: Temperature, humidity, pressure, magnetic, etc. - Wireless technologies: Bluetooth, Zigbee, WiFi, GSM, GPS, Cellular. If you are looking to design PCB(1,2,3,4--16) layer for your Circuit, then you are in the right place. I can also provide help in the schematics design and manufacturing process. I can also deliver finished prototypes of your products. If you don't have a schematic, send me your requirements. I will come up with a schematic and PCB. Softwares: For PCB Designing, I Mostly use the latest version of Altium Designer, but I can also use other software: * Orcade * Zuken CADSTAR * Porteous * Eagle * KiCad * EasyEDA I can provide output : * Schematic Design * PCB Design * Gerber files for manufacturing * Bill Of Materials (BOM) * 3D Models of PCB * DXF file for Mechanical drawing, etc. Why me? • Provides revisions until you are 110% satisfied. • Meets deadlines and does not compromise on quality. • Ensures timely updates with responsibility. Don't hesitate to reach out to me. I'm interested to hear what you are working on, and I'll be honest about what I can contribute.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Internet of Things Solutions Design
    WiFi
    Bill of Materials
    FPGA
    Bluetooth
    Microcontroller
    Electronic Circuit Design
    Altium Designer
    ESP32
    PCB Design
    Hardware Design
    Circuit Design
    Arduino
    Digital Electronics
  • $15 hourly
    💾 Embedded System Designer 💼 | IoT Solutions 🌐 | Firmware Development 🛠️ | Microcontroller Programming ⚙️ | Sensor Integration 📊 | IoT Protocols 📡 | C/C++/Python 🚀 📊 Results-Driven Embedded System Designer with 5+ Years of Experience 💼 Hello there! 👋 I'm an experienced Embedded System Designer with a strong background in IoT solutions and firmware development. I specialize in designing and implementing efficient and reliable embedded systems for a wide range of applications. With over 10 years of experience in the field, I'm proficient in programming microcontrollers in C/C++/Python and integrating sensors to create innovative IoT solutions. 🚀 Expertise: ✔ Embedded systems design for various applications, including smart home devices, industrial automation, IoT sensors, and wearable devices. ✔ Firmware development for microcontrollers and embedded systems, including device drivers, communication protocols, and system integration. ✔ Microcontroller programming in C/C++/Python for popular microcontrollers, such as ARM Cortex-M, AVR, PIC, and ESP32/ESP8266. ✔ Sensor integration, data acquisition, and processing for real-time applications. ✔ IoT protocols, such as MQTT, CoAP, and HTTP, for efficient and secure communication between embedded systems and cloud services. ✔ Wireless communication, including Wi-Fi, Bluetooth, Zigbee, and LoRaWAN, for IoT connectivity. ✔ Embedded Linux development, including kernel configuration, device tree, and application development. ✔ Hardware design considerations, including schematic capture, PCB layout, and prototyping for embedded systems. 🔧 Professional Experience: As an Embedded System Designer, I have successfully designed and implemented embedded systems for a variety of industries and applications, including smart home devices, industrial control systems, energy management systems, and IoT sensors. I have hands-on experience in all stages of embedded system development, from concept to production, and I'm well-versed in industry standards and best practices. 💼 Recent Projects: 🏠 Designed and developed a smart home automation system, including firmware development for microcontrollers, wireless communication with IoT protocols, and integration with cloud services for remote control and monitoring. 🏭 Implemented an energy management system for a commercial building, including real-time data acquisition from multiple sensors, processing of sensor data, and control of energy-consuming devices for optimal energy utilization. 👕 Designed a wearable health monitoring device, including sensor integration for tracking biometric data, firmware development for data acquisition and processing, and wireless communication with a mobile app for data visualization. 🏭 Developed an industrial automation system for a manufacturing plant, including microcontroller programming for motor control, communication with PLCs, and integration with HMI interfaces for real-time monitoring and control. 🌱 Designed a custom embedded system for a smart agriculture application, including sensor integration for soil moisture, temperature, and humidity monitoring, and wireless communication with a cloud-based platform for remote monitoring and irrigation control. 📚 Education: I hold a Bachelor's degree in Electrical Engineering with a focus on Embedded Systems Design. I'm also certified in various embedded system development tools and technologies, including C/C++, Python, and IoT protocols. 💻 Technical Skills: 💥 Embedded systems design using microcontrollers, such as ARM Cortex-M, AVR, PIC, and ESP32/ESP8266. 💥 Firmware development, including device drivers, communication protocols, and system integration. 💥 C/C++/Python programming for microcontrollers and embedded systems. 💥 Sensor integration, data acquisition, and processing for real-time applications. 💥 IoT protocols, such as MQTT, CoAP, and HTTP, for efficient and secure communication. 💥 Wireless communication, including Wi-Fi, Bluetooth, Zigbee, and LoRaWAN, for IoT connectivity. 💥 Embedded
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    KiCad
    STM32
    Internet of Things
    Bluetooth LE
    PCB Design
    Digital Electronics
    Embedded System
    ESP32
    Electrical Engineering
  • $32 hourly
    ✅High-Quality ✅Time-Compliance ✅Smart-Project ✅Client Satisfaction I have great experience in PCB designing and writing firmware. I have also worked on microcontrollers for different kinds of products related to a data logger for the car(uses OBD protocol), Internet of things(using MQTT protocol, Modbus protocol, GSM module). Also, I have experience in working with RTOS and Bus protocols like I2C, SPI, and CAN. 🌟 Hardware/Controller - Raspberry Pi, Beaglebone boards, Arduino, AVR, PIC, ARM Cortex-M, Link It One, Photon Particle, STM32, TI Launchpads, LPC, NXP, CC3100, ESP8266, 8051, Renesas, nRF51 and much more as per client's requirements and suitable to cost of a project. 🌟 Software/Firmware - Embedded C/C++, Embedded Linux, FreeRTOS, Python, AWS, Embedded Andriod (Bluetooth, Wifi), FFMPEG, OpenCV 🌟 DevTools/IDE - Eclipse, E2Studio, LPC Xpresso, National Instruments(LabView and TestStand), Wireshark, Ubiqua, QT, Simplicity Studio, Atmel Studio, MPLAB, MATLAB, IAR, Keil, nrfGoStudio, Android Studio, PCB Design(Kicad, Altium) 🌟 Interface - WiFi, BLE/Bluetooth, RF, GSM/GPRS, GPS, 6LowPan, Zigbee, JTAG, ICSC, Magnetic Sensor, Ultrasonic Sensor, Infrared Sensor, Touch Sensor, Accelerometer, Gyroscope, Temperature Sensor, Level Sensor, Pressure Sensor, Microphone, Piezo Sensor, Mp3 Audio Playback, etc. 🌟 Peripherals - DCMI/Camera, Ethernet, HDMI, DMA, USB, RTC, SPI, I2C, UART/RS232/RS485, Data Flash, EEPROM, WatchDog, Timer, Random Number Generator, DAC, ADC. 🌟 Device Drivers - Linux Device Drivers, LED Drivers 🌟 Communication:- Ethernet, Bluetooth, Zigbee, Wifi, LoraWAN, IOT-DB 🌟 Networking protocol - TCP/IP, UDP, TLS, SRTP, SIP/SDP/RTP 🌟 Security :- Open Trust Protocol, X.509,ASN.1 Experience of many Sensors to interface with microcontroller including Accelerator, Gyroscope, Magnetic Sensor, Ultrasonic Sensor, Touch Sensor, Infrared Sensor, Temperature Sensor, Level Sensor, Pressure Sensor, etc. I also worked on much wireless technology including WiFi(ESP8266), BLE/Bluetooth(HC-05, CC2540), RF, GSM/GPRS(Telit GL868 and SIMCOM), GPS, Zigbee. I'm flexible with my working hours and am happy to work closely with any existing freelancers you work with. If the above offer sounds like something you would be interested in, I’d love to hear from you. If you want to collaborate with me lets discuss it in more detail over the chat. I'm looking forward to discussing in detail. Kind regards, Have a good day, Alpesh Mangukiya.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Electrical Engineering
    Altium Designer
    Prototype
    Sensor
    Digital Electronics
    Internet of Things
    Embedded System
    PCB Design
    Arduino
    Bluetooth LE
    Circuit Design
    KiCad
    ESP32
  • $10 hourly
    I have experience with different microcontrollers like Atmel, Microchip, Renesas. Also utilized different interfacing modules like SPI, I2C, USB, RS485 etc.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Digital Electronics
    PCB Design
    Internet of Things
    Raspberry Pi
    Hardware Troubleshooting
    Wearable Technology
  • $20 hourly
    PCB & Circuit Design| IoT & Firmware Development I am an experienced Electronics and Electrical Design Engineer having Master's degree in Embedded Systems. My areas of expertise are in Embedded System, Product Prototyping, PCB layouts and Firmware Development. I have more than 7 years of experience in PCBs, Digital Electronics, analog Electronics and Microcontrollers Programming.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Microcontroller Design
    Integrated Circuit
    Electronic Circuit Design
    Digital Electronics
    Electronic Design
    Power Electronics
    Electrical Design
    Telecommunications Engineering
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job (it’s free)

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Analog Electronics Specialist near Surat, on Upwork?

You can hire a Analog Electronics Specialist near Surat, on Upwork in four simple steps:

  • Create a job post tailored to your Analog Electronics Specialist project scope. We’ll walk you through the process step by step.
  • Browse top Analog Electronics Specialist talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Analog Electronics Specialist profiles and interview.
  • Hire the right Analog Electronics Specialist for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Analog Electronics Specialist?

Rates charged by Analog Electronics Specialists on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Analog Electronics Specialist near Surat, on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Analog Electronics Specialists and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Analog Electronics Specialist team you need to succeed.

Can I hire a Analog Electronics Specialist near Surat, within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Analog Electronics Specialist proposals within 24 hours of posting a job description.