Upwork home
Sign up
Secondary

Hire the best ARM Programmers in India

Check out ARM Programmers in India with the skills you need for your next job.
Get started
  • $70 hourly
    • 5.0/5
    • (14 jobs)
    I have more than 25 years of experience in Embedded products, Edge AI, firmware & hardware development for Industrial controllers, IoT, Medical devices, Automotive, Water resource management, Consumer Electronics, and Telecom Products. Strong knowledge and experience of the following technologies: 📌 Designing and Programming microcontrollers (ARM Cortex M0, M3, M4, ESP32, nRF52840, RP-2040, PIC) 📌 VScode, -ESP-IDF, Arduino, STM32CubeIDE, CCS5/6, Eclipse, FreeRTOS, ESPHome, Tasmota, and Yocto Pojects, 📌Edge AI - TynyML, Edge Impulse, BME AI - Studio 📌 Altium Designer, Mentor Graphics PADS, Fusion 360, KiCad, MS Visio, Draw.io 📌 Strong programming skills in Embedded C/C++ and Linux 📌 BLE, Wi-Fi, Sub1GHz, LoraWAN, RFID, NFC, NB-IoT, Zigbee 📌 STM32F0/F4 MSP430, ATMEGA, ATSAM 📌 IMU sensors, Load cell, flow sensor, Soil moisture sensors , pH sensor, NPK sensor, CMOS Image Sensor, light sensor, CO sensors, Smoke Sensor, Temperature & Humidity sensors, Ultrasonic sensors, encoders. 📌 SIM800C/H, SIM7080G, MC60/M95/UC15/UC20/EC20. 📌 DDR3, HDMI, USB2.0/3.0/TypeC, eMMC , SD card. 📌 SPI, I2C, Modbus, CAN, CANopen, CAN SAE-J1939, I2S, EtherNet/IP, Profinet, USB, RS232, Modbus TCP, and MQTT. 📌 RF Design, Analog, Signal Conditioning, Power Supplies, Battery Management and Wireless 📌 Digital oscilloscopes, logic analyzers, JTAG, and SWD Intellectual property protection I’m a professional engineer and I respect your intellectual property rights, this is an area where I can earn your trust by safeguarding your product, which could involve patents, trademarks, or code protection. This is one of the ways that I offer additional value to my clients I invite you to reach out to discuss your projects or any questions you might have. I'm open to both short-term and long-term engagements and to help you with high-quality, innovative solutions
    Featured Skill ARM
    Hardware Design
    Automotive Design
    Serial Port Interfacing
    Firmware Programming
    Hardware Troubleshooting
    Automation
    ARM Microcontroller
    Altium Designer
    Instrumentation
    Product Design
    FreeRTOS
    Wireless Communication
    Embedded System
    Embedded C
    Embedded Linux
  • $50 hourly
    • 4.9/5
    • (14 jobs)
    Experienced in the field of Embedded System Design. Main Area of Interests is Home Automation, Industrial Automation, IoT System Design, Embedded System Design, PCB Design, Firmware and Application programming. PCB Design Skills: Altium, Eagle, KiCad. Micro Controlllers: FPGA, CSR8670 , CSR8675, STM32, ESP32, NRF52840, NRF52832, Arduino, Raspberry Pi. Interface Protocol : SPI, I2C, I2S, DSI, UART, CAN, ModBUS, RS232, RS485. Communication: WiFi, Bluetooth, BLE, Bluetooth5, NFC, ANT, SUB-1GHz, ZigBee, 6lowpan, IR, LORA
    Featured Skill ARM
    Arduino
    ARM Microcontroller
    Embedded System
    WiFi
    PCB Design
    Arduino Firmware
    Raspberry Pi
    Firmware
    ESP32
    STM32
    nRF52
    Microcontroller Programming
    Embedded C
    Bluetooth LE
  • $50 hourly
    • 5.0/5
    • (1 job)
    A full time remote Embedded Development Engineer. I am looking for projects that involve complete product development. I have a complete lab setup for development. My proficiency is particularly in Micro-Controllers. Recently I have been working mostly on MSP430 and STM32 processors. Having good experience of working on BLE and IoT based systems. Also have a good experience of implementing end to end IoT implementations which involve server level developments including REST API development. Excellent in development of NodeJS applications for monitoring and storing of data from embedded platforms, PLC's etc. Also have experience of working on PLC, Ethercat protocols. I am predominantly looking for a long term project and working on hourly basis.
    Featured Skill ARM
    C
    ARM Cortex-M
    ARM Microcontroller
    Internet of Things
    Electronic Workbench
    Embedded System
    Bluetooth LE
    Mechatronics
    Electronics
    Node.js
    C++
    STM32F4
    MSP430
    Internet of Things Solutions Design
    STM32
  • $35 hourly
    • 4.7/5
    • (4 jobs)
    Passionate IT professional with 17 years of experience in implementing full SDLC and application life cycle management (ALM). Skilled DevOps Engineer with 12 years of extensive hands-on experience in automating, and optimizing mission-critical deployments in the Windows environment, leveraging configuration management, CI/CD, and DevOps processes. Excellent in implementing reporting dashboards using PowerBI. Specialties: DevOps engineering, Azure DevOps, Azure cloud, Terraform, ALM, Scripting, .Net Apps development, C#, ASP.Net, MVC, GIT, Process re-engineering, Process automation, SonarQube, Agile, Scrum, Power BI. Achievements: •MSDN gallery contributions were downloaded nearly 24k times. •MSDN forum contributor.
    Featured Skill ARM
    Terraform
    .NET Core
    SonarQube
    Azure DevOps Server
    ELK Stack
    ARM Microcontroller
    Microsoft Azure
    Microsoft IIS
    ASP.NET Web API
    DevOps
    Jenkins
    GitLab
    Azure DevOps
    C#
  • $65 hourly
    • 5.0/5
    • (1 job)
    I am a IoT solutions architect and product manager with extensive experience with Industry 4.0 applications. My expertise lies edge applications for IoT projects with emphasis on AI on Edge for several types of sensor data. Overall, I have over 24 years of software development experience on embedded systems using Linux, BSD, QNX with C and C++ focused on device drivers, kernel customization, networking protocols, cross platform applications and high performance network services. I'm proficient with Qt, C++ STL, OpenCV, OpenMPI, UNIX syscalls, POSIX APIs, Tensorflow and Torch. My domains experience spans across Industrial Automation, Energy and Telecom.
    Featured Skill ARM
    RESTful Architecture
    Unix
    Universal Windows Platform
    Microservice
    Socket Programming
    Windows API Development
    MQTT
    TensorFlow Lite
    Python
    ARM Microcontroller
    ARM Cortex-M
    Linux
    Sensor Fusion
    Edge AI
    C++
    Boost
    C
    Qt Framework
  • $50 hourly
    • 4.4/5
    • (63 jobs)
    👋 Welcome to my profile! I am a skilled Reverse Engineer and Developer with a passion for solving complex problems and creating innovative solutions. With 10 years of experience in the field, I specialize in Reverse engineering, AOSP Developer ,malware analysis, and software development. Android Kernel/Firmware/App Developer (AOSP) Android reverse engineer. Reverse Engineering of Binary Executables Decompilation of Compiled Code Malware Analysis and Removal Code Obfuscation and Protection Analysis Legacy Software Recovery Software Vulnerability Assessment Patch Development and Implementation Custom Tool Development My Reverse Engineering skills: * decompilation, debugging, analysis, and modification of native android libraries * reversing of Linux/OS X/Android/iOS applications * bypass SSL pinning. Interception, modification, and analysis of network traffic * extract data, code, algorithms, signatures, and network addresses * inject Smali bytecode * almost every debugger/decompiler: IDA/Hopper/lldb/etc. * application modification for add, remove, modify functionalities * creation of private API for applications * know arm and x86 assembler * use Ghidra for the analysis of native libraries * have experience in reverse Unity, Cocos, Kony android apps My Development Skills : *Android Kernel/Firmware/App Developer (AOSP) * Android, iOs, & Django * kotlin, swift,java, samli, x86, arm, c , c++ , javascript ,and python * WhatsApp ChatBot * VPN * Unit Testing * UI/UX with Animation * Admin Panel to Control Application Back End * Django * Firebase Front End, Back End(Cloud Functions, Realtime Database, Cloud Firestore) I'm ready to work 24/7, full-time, or part-time. Client satisfaction and on-time delivery is my priority.
    Featured Skill ARM
    Assembly Language
    Assembler
    Linux
    Kotlin
    Reverse Engineering
    Android App Development
    ARM Microcontroller
    Malware Removal
    C
    Python Script
    C++
  • $40 hourly
    • 5.0/5
    • (1 job)
    • Over 20 years of experience in Embedded Software Development • Excellent problem-solving skills. • Complete product life cycle experience from concept to delivery on STM32 and PIC micro. • Designed and developed delivery box project on ESP32-Wrover • Improvement and bug fixes for tracking and monitoring device on Atmel AT91SAM3U4 . • Validated HID over I2c protocol specification on STM32F103 for Microsoft. • Designed and developed I2C to HID USB Protocol Converter Bridge on STM32F. • Algorithm design and development for finger sorting, finger tracking for touch sensor. • Design and develop a lightweight cooperative scheduler for ARM CortexM3. • Designed and developed board diagnostics software that communicates over UART. • Developed I2C and USB-based Bootloader for ARM core. • Developed board validation firmware utility and experience in firmware validation. • Worked on firmware driver development for USB (LTS), LCD (Character, VGA, OLED), I2C (Memory, RTC, LTS), UART (Card Reader), SPI (Memory, IO Expander). • Experience in IoT, Consumer, Automotive, Aviation, Semiconductor & Industrial domains.
    Featured Skill ARM
    Hardware Design
    Microcontroller
    Firmware Programming
    Raspberry Pi Firmware
    ARM Microcontroller
    Project Management
    Linux
    FreeRTOS
    ARM Cortex-M
    Arduino Firmware
    Real-Time Operating System
    Embedded System
    USB Electronics
  • $80 hourly
    • 0.0/5
    • (0 jobs)
    Experienced Engineer with deep insight into both the hardware(analog, digital, computer architecture, FPGAs) and software(C, Python) side of Embedded, IOT and other Cyber Physical Systems.
    Featured Skill ARM
    Xilinx
    FPGA
    Machine Learning
    ESP8266
    ARM Microcontroller
    AVR Microcontroller
    KiCad
    Schematic
    Software Architecture & Design
    Microprocessor
    Git
    Verilog
    Python
    C
    Embedded System
  • $30 hourly
    • 4.9/5
    • (54 jobs)
    A passionate programmer and Electronics engineer, having expertise in Programming Microcontroller, Interfacing devices with Microcontrollers, CMOS circuit design, and analysis, Digital Design, and simulation, Creating custom Libraries for Arduino and other microcontrollers, Circuit Analysis, Algorithm designing, Automation, Mechatronics, Assistance in components selection, PCB designing, Java, Python, Open CV, Applied Physics and Mathematics. ------------------------------------------------------------------------------------------------------- I had worked on the following Microcontrollers: * Atmega 328p (Arduino nano, pro mini, UNO) * Atmega 2560 (Arduino Mega) * ESP8266/NodeMCU, ESP 32(Espressif Systems) * STM32/BluePILL (ARM-based 32-bit MCU) * Teensy Board * MSP 432 * Raspberry Pi ------------------------------------------------------------------------------------------------------- Programming Languages: * C / C++ * VHDL * Python ------------------------------------------------------------------------------------------------------- A few of my achievements are: * 0.9-3.3V GPIO Design using 28nm PDK * Soldering Station * Remotely controlling major Electrical Events in Home * Motor Driver circuits especially for competition robots * Automated Parking System with Machine Learning and paperless slips. * Autonomous Quadcopter * Conductivity Meter * Interrupt based firing system for Spark Plug of Internal Combustion Engine * High Stricker using WS2812b programmable led strips * Temperature regulating Arduino-based Heating lamp controller. * Vibration Detectors for Industrial High Power Motors.
    Featured Skill ARM
    ARM Microcontroller
    PCB Design
    Mathematics
    Arduino
    ESP32
    Digital Electronics
    Embedded C
    Prototyping
    Firmware
    Analog Electronics
    Microcontroller
    Physics
    C++
    C
  • $25 hourly
    • 5.0/5
    • (35 jobs)
    Professional IT trainer with extensive experience in Microsoft’s range of products. An expert at designing training courses with technical content, I am effective at imparting knowledge through my superior verbal communication skills and active listening style. I have proven success in utilizing cutting-edge technology to devise training exercises for all types of learners. Skills • Expert skill level in Microsoft Azure Cloud Administration (AZ 104/ AZ 900/ AZ 700 / AZ 500 / AZ 400) • Expert skill level in PowerShell Scripting. • Experienced technical trainer both on site and from remote locations. • Strong interpersonal and group communication skills. • Excellent time management skills and ability to successfully meet training deadlines. Work Experience • Plan, Design and configure end to end network components in Azure Cloud. • Plan and Configured VNET Peering, Transit Gateway, Hub and Spoke Topology, • Configured User define routes and route tables, • Configured Point-to-Site VPN and Site-to-Site VPN, • Worked on Express Routes and Express Circuits • Setup Azure Load Balancers • Configured Azure App Gateway • Worked on Azure DNS • Set up Traffic Manager • Configured Content Delivery Network and Front Door • Setup and administer Azure Firewall, Network Security Group Application Security Group. • Create/Deploy Virtual Machine(windows/Linux) using Portal, PowerShell and ARM templates • Configured Availability zone and Availability set, Virtual Machine Extension • Azure Administration using Azure CLI, PowerShell and Cloud Shell • Azure Storage Administration, blob service, file share. • Azure Backup and restore and backup troubleshooting. • Azure Monitor, alerts and Log Analytics workspace • Azure AD, subscription, AD users, group, RBAC • Azure AD conditional access • Azure Key Vault, Managed identity • Configured Azure disk encryption (PMK & CMK) • Set up Azure AD app registration • Setup Azure Automation runbook and update Management
    Featured Skill ARM
    Terraform
    System Administration
    Training Presentation
    Microsoft Azure
    Microsoft Server
    ARM Microcontroller
    Microsoft Windows PowerShell
    Automation
    Scripting
    Microsoft Windows
    Virtualization
  • $9 hourly
    • 0.0/5
    • (0 jobs)
    I have almost four years of experience in the embedded systems domain, working with a wide range of microcontrollers, including STM32, ATmega2560, ATmega328P, ESP32, and microprocessors from leading vendors such as Texas Instruments (TI), DSP Group (DSPG), Raspberry Pi, and others. During the first two years, I worked extensively with microcontrollers in the robotics club, where I was responsible for designing the embedded firmware for various robots. The primary controllers we used in these projects were the ATmega2560 and STM32. Additionally, I worked on side projects involving the ESP32, where we successfully designed a fully functional robot controlled via a web interface over Wi-Fi. Since 2023, I have been employed at Matrix Comsec Pvt. Ltd., Vadodara, as an Embedded Software Developer. In this role, I design and implement robust embedded systems, specifically targeting ARM-based System on Chips (SoCs) from prominent vendors such as Texas Instruments (TI), DSP Group (DSPG), and others. My main focus is to develop complete embedded platforms tailored to meet specific product requirements, adhering to a comprehensive development lifecycle. This process begins with designing and implementing custom bootloaders to ensure efficient and secure system initialization. I then proceed with kernel optimization to improve performance, stability, and responsiveness. Additionally, I integrate essential libraries and frameworks into the root filesystem, tailored to the application's specific needs. Throughout this process, I collaborate closely with hardware and software teams to ensure seamless integration and optimal functionality for a wide range of embedded applications. As an engineer, I continuously strive to acquire and refine my skills. My expertise includes: - ESP32 series of SoCs (ESP32, ESP32-S2, ESP32-S3, ESP Cam module), ESP-IDF - ATmega series of SoCs (ATmega2560, ATmega328P) - Raspberry Pi - AM335x series of SoCs from TI - DSPG dvf991x series of SoCs If you hire me, you will gain access to a broad range of services and expertise all at once. I am highly confident in our potential for success together, as I am punctual, creative, and passionate about my work. I look forward to hearing from you. Thank you.
    Featured Skill ARM
    ESP8266
    ESP32
    Driver Development
    Atmel AVR
    AVR Microcontroller
    C++
    C
    Kernel
    Firmware Programming
    ARM Microcontroller
    ARM Cortex-M
    Arduino Firmware
    Embedded C
    Embedded Linux
    Embedded System
  • $12 hourly
    • 0.0/5
    • (0 jobs)
    Transforming Ideas into High-Performance Embedded Solutions With 7 years of hands-on experience in firmware development in a product based startup, I specialize in crafting robust, scalable, and high-performance embedded solutions from scratch. My expertise spans across single-core, dual-core, and multi-core processors, working with industry-leading controllers/processors like Infineon CCG3PA, FX3, Rockchip RK3399, Nvidia Jetson, TI Delfino series controllers, ESP32, Xilinx Zynq 7000 SoC and ZCU102 architectures. I bring a deep understanding of hardware-software interaction, real-time system constraints, and performance optimization, ensuring seamless product development from concept to deployment. 🔹 Core Expertise: - Embedded C | Linux | RTOS | BARE-METAL | ARM & AVR Architectures - Second stage boot loaders development for Single Dual and multi core architectures - Linux Device Drivers | Petalinux Kernel Development | Buildroot Environment - Bare-metal Programming | Board Bring-Up - USB Stack Development | USB-C Power Delivery | Wireless Qi Charging - Peripheral Interfaces: Ethernet, SPI, CAN, I2C, RS485, RS232, UART 🔹 Comprehensive Product Development Expertise: I have experience in all stages of the product development lifecycle, including: - Requirement Gathering : Understanding project needs & technical feasibility - Proof of Concept (PoC) Development : Evaluating and testing selected components - Board Bring-Up : Low-level initialization & hardware-software integration,board bootup - Firmware Stack Development : Designing efficient & scalable firmware solutions - Debugging & Optimization : Using logic analyzers for debugging time-sensitive peripherals and data - Customer Collaboration : Working directly with clients to ensure product success I have a strong track record of delivering optimized firmware solutions, industrial automation, and consumer electronics. Whether you need bare-metal firmware development,low-level firmware development, real-time OS implementation, driver development, or hardware-software integration, I bring precision, efficiency, and innovation to every project. - Let’s bring your embedded vision to life! - Drop me a message to discuss how I can help with your project.
    Featured Skill ARM
    Embedded C
    Linux
    Arduino Firmware
    Software Debugging
    Software Testing
    FPGA
    Firmware
    Raspberry Pi Firmware
    ARM Cortex-M
    ARM Microcontroller
    Embedded System
    C
    Firmware Programming
    Real-Time Operating System
  • $10 hourly
    • 0.0/5
    • (1 job)
    About I am an Embedded System Development enthusiast with a good understanding of RTOS concepts. Have Experience in c and c++ language programming for 32 and 8 bit microcontrollers for integrating functionalities like timers counters, PWM signal generation. Integrating peripheral modules with proper configuration of interrupts and masking. Configuring Ports for GPIOs and alternate functionalities like CAN, UART, SPI, I2C, RS232, Timers, Counters, PWM signals, ADC, etc.
    Featured Skill ARM
    Firmware Programming
    MATLAB
    Bluetooth LE
    Communications
    ARM Microcontroller
    Launchpad
    CAD Software
    C++
    Embedded System
    Arduino Firmware
    Bluetooth
    STM32
    Arduino
    Embedded C
    C
  • $20 hourly
    • 0.0/5
    • (1 job)
    EMBEDDED SYSTEMS| FIRMWARE DEVELOPER | EV CHARGER | MICROCONTROLLER | FREERTOS |TINYML | NEUROMORPHIC COMPUTING | EDGE COMPUTING
    Featured Skill ARM
    C++
    C
    FreeRTOS
    CAN Bus
    ARM Microcontroller
    Firmware Programming
    Firmware
    STM32
    Software Debugging
    nRF52
    Embedded System
    Embedded C
  • $12 hourly
    • 0.0/5
    • (0 jobs)
    To work with total dedication and concentrate so that I can enhance my knowledge and skill to give my best for the growth of the company. ACADEMIC PROJECTS * Floor Cleaning Robot Using Arduino | Software Use: Arduino IDE , Protus * Developed embedded hardware and software for a robotic floor cleaning robot using Arduino, Fire sensors, and Motor Driver, Battery, Relay Panel, Bluetooth Module. * Programmed navigation for the robot with detailed map, successfully decreased cleaning time by 25%, and improved navigation accuracy by 98%. * Enabled communication between Arduino and Fire Sensor to detect flame and quickly adjust the robot's movement to avoid dangerous areas. * Motor Protection With Cooling Fan Using Arduino | Software Use: Arduino IDE , Protus. * The Arduino is equipped with temperature sensors, such as thermistors or digital temperature sensors, that are placed
    Featured Skill ARM
    ARM Microcontroller
    Research Protocols
    Linux
    Microcontroller Programming
    Real-Time Operating System
    C
    Embedded System
    Arduino
    Embedded C
  • $10 hourly
    • 0.0/5
    • (0 jobs)
    I am embedded firmware engineer with 3 years of experience. I am looking for part time freelancing opportunity. I have worked on esp32, stm32, stm8, avr, arm, Arduino, atmega328, atmega128, raspberry pi, etc.. I have implemented http, mqtt, TCP, uart, i2c, spi communication protocols.
    Featured Skill ARM
    UART
    TCP/IP
    HTTP
    MQTT
    C++
    C
    Raspberry Pi Firmware
    Raspberry Pi
    Python
    ARM Microcontroller
    Microcontroller Programming
    Embedded C
    Software
    Embedded System
    Embedded Application
  • $12 hourly
    • 0.0/5
    • (0 jobs)
    I'm developer experienced in Embedded system design and development, experience in IoT development using ESP32 with Firebase, Azure and AWS platform. • Good knowledge in C, C++ languages for Embedded design and HTML, Javascript for web page design. • Have good knowledge in protocols like HTTP, MQTT, Websocket, and REST APIs. • Also have experience in WiFi, Bluetooth, Ethernet, USB, SD card, ccTalk, onewire protocols. Have necessary hardwares like development boards and debugger to complete and test code.
    Featured Skill ARM
    Printed Circuit Board
    Circuit Design
    GUI Framework
    ARM Microcontroller
    C++
    Assembly Language
    C
    Firebase
    AWS IoT Core
    PIC Programming
    AVR Microcontroller
    STM32
    ESP32
    Firmware
    Firmware Programming
  • $5 hourly
    • 0.0/5
    • (0 jobs)
    "Hi, I'm an embedded firmware and IoT developer with a strong passion for designing and building innovative, connected solutions. I specialize in creating efficient firmware for microcontrollers, developing IoT systems, and ensuring seamless communication between devices. From prototyping and debugging to final deployment, I take pride in delivering high-quality, reliable results tailored to specific project needs. I thrive on tackling new challenges, constantly learning, and collaborating with clients to turn their ideas into practical, cutting-edge products. Whether it's a small-scale prototype or a full-fledged IoT ecosystem, I aim to provide solutions that are not only functional but also efficient and future-ready. Skills: • Embedded firmware development (C, C++,Python). • IoT system design and integration. • Microcontroller programming (ESP32, ATmega32A, STM32, Renesas etc.). • Wireless communication (Bluetooth, Wi-Fi, LoRa, Zigbee). • Sensors and hardware interfacing. • Prototyping, debugging, and testing. • Custom bootloaders and low-level firmware. • Development tools: VSCode, PlatformIO, Arduino IDE,Keil, Cube Mx,MIcrochip Studio. • Expertise in MQTT, REST APIs, and IoT protocols.
    Featured Skill ARM
    ARM Cortex-M
    FreeRTOS
    Embedded C
    Python
    C
    C++
    STM32F4
    Atmel AVR
    ESP32
    Raspberry Pi Firmware
    STM32
    ARM Microcontroller
    Microcontroller Programming
    Internet of Things
    Firmware
  • $17 hourly
    • 0.0/5
    • (0 jobs)
    Strong Knowledge and Hands on Micro Controllers such as 8051,ATMEGA32, LPC1768,Msp430g2553,TI - Stellaris,STM32F0 Discovery with interfaces such as GPIO, UART, SPI, I2C,ADC. Having a capability to select 8/16/32 bit microcontroller as per the application. Good knowledge of Bluetooth Low Energy and Internet of Things (IOT) .Now Currently working in Automotive domain for Infotainment. Good Knowledge in Adaptive Autosar
    Featured Skill ARM
    ARM Microcontroller
    ARM Cortex-M
    Microcontroller Programming
    Microcontroller
    FreeRTOS
    Embedded C
    Electronics
  • $5 hourly
    • 0.0/5
    • (0 jobs)
    Summary Post-graduated with a Master in Technology in Embedded Systems having more than 5 years of relevant experience in firmware design & development for projects in Power tools & utilities, Oil & Gas, and research and development domains. In projects such as Scalar (V/F) and Field Oriented Control, Hall sensor-based & Back EMF based sensor-less motor control Algorithm of PMSM motor up to 30000 RPM, Motor current multi-point multi-profile simulator for downhole applications, Single Phase & Three Phase Static Voltage Regulator, and Linux based Data Acquisition System, I have hands-on experience on the bare-metal and low-level driver development for different ARM microcontrollers and industrial communication protocols. I am proficient in Linux and Windows Operating Systems. I am passionate about contributing my expertise, knowledge, and creativity in embedded systems and their applications for the organization's and technology's growth.
    Featured Skill ARM
    ARM Microcontroller
    ARM Cortex-M
    Event-Driven Programming
    FreeRTOS
    Embedded System
    Embedded Operating System
    Embedded C
    C++
  • $15 hourly
    • 0.0/5
    • (0 jobs)
    PROFILE * A competent professional with nearly 16 years of experience in Software Development currently working as R&D head (R&D department) in Photonplay system Inc. * Rich experience in Project/People/Process management (certified PMP) with working knowledge of Agile methodology. * Possess management, excellent troubleshooting, interpersonal, and time management skills. * Working experience traffic management Web solution, IOT web solution, and many more architecture solution. * Expert in C/C++ programming with data structure. * Expert in socket programing. * Expert in memory management components. * Good knowledge of multitasking operating system. * Good Knowledge of smartcard security attacks. * Good Knowledge of 8bit, 16-bit 32-bit microcontroller Architecture. * Good Knowledge of Boot loader Implementation for Sim Card.
    Featured Skill ARM
    Java
    Microcontroller
    ARM Microcontroller
    STM32F4
    Assembly Language
    Golang
    Python
    IT Project Management
    Architecture
    Problem Solving
    C++
    C
  • $40 hourly
    • 4.1/5
    • (2 jobs)
    ! An embedded engineer having experience in designing and developing firmware, device drivers, user applications. ! Worked on RDMA, SPDK, DPDK ! Worked on physical later protocols like I2C, SPI, UART and wireless modules like Zigbee, NFC ! Experienced in board schematic design and digital circuitry design, extensively worked on NXP Cortex M series MCUs ! Developed a indoor air quality logger from scratch, developed several projects for Indian railways
    Featured Skill ARM
    Embedded Linux
    Computer Hardware Design
    C
    Embedded C
    Firmware Programming
    ARM Cortex-M
    Driver Development
    Embedded System
    ARM Microcontroller
  • $3 hourly
    • 0.0/5
    • (0 jobs)
    I'm electronics and communication engineering student and right now I'm doing internship in embedded systems and other things like PCB designing and embedded systems coding , I'm here to get experience,so please give me chance.
    Featured Skill ARM
    Arduino
    STM32
    Web Development
    Internet of Things
    Biotechnology Regulation
    ESP32
    Electronics
    ARM Microcontroller
    Embedded System
    Electronic Circuit Design
    PCB Design
  • $4 hourly
    • 0.0/5
    • (0 jobs)
    Embedded Systems & MATLAB Specialist | IoT, Automation & Digital Design I am an Embedded Software Engineer with expertise in microcontrollers (8051, Arduino, ESP32-CAM), MATLAB, and Python automation. I specialize in firmware development, Verilog-based digital design, and embedded C programming. ✅ What I Offer: Microcontroller-based projects (Arduino, ESP32, LPC2148) MATLAB scripting for signal processing, image processing, and simulations Embedded C and Python automation for IoT & industrial applications Digital design in Verilog & FPGA simulation Debugging & optimization of embedded systems I have worked on real-time object detection, speech recognition, and centralized classroom control systems, integrating Google Sheets API and YOLOv8 for automation. If you're looking for an efficient, detail-oriented engineer to bring your embedded or automation project to life, let’s connect!
    Featured Skill ARM
    Engineering & Architecture
    Electrical Engineering
    Project Management
    Arduino
    ARM Microcontroller
    Embedded System
    Digital Electronics
    PCB Design
  • $3 hourly
    • 0.0/5
    • (0 jobs)
    Summary Embedded software engineer with 2+ years of experience in microcontroller programming, hardware design, and firmware development. Proficient in C, Embedded C, and Assembly for STM32, Nuvoton, and Atmel controllers. Expertise in communication protocols (I2C, SPI, UART, MODBUS, Ethernet, USB) and real-time debugging using JTAG/SWD. Strong background in medical device compliance (IEC 62304, ISO 13485) and power electronics. Projects Left Ventricular Assist Device (LVAD) Firmware Development Developed firmware for an STM32-based LVAD, a battery-operated mechanical pump for heart failure patients. Designed a multi-MCU architecture including master, motor, and display controllers. Implemented power management algorithms with ADC for battery switching. Integrated Hall sensor-based RPM monitoring for motor control. Developed robust UART communication for seamless data exchange.
    Featured Skill ARM
    Bluetooth LE
    Microcontroller Design
    Microcontroller Programming
    ESP8266
    ESP32
    ARM Microcontroller
    ARM Cortex-M
    PCB Design
    Serial Port Interfacing
    Firmware Programming
    FreeRTOS
    Operating System
    Embedded C
    C
    STM32
  • $4 hourly
    • 0.0/5
    • (0 jobs)
    PROFILE A dedicated Embedded Systems Engineer with expertise in Embedded C and Python for microcontroller solutions. Proficient in STM32, ESP32, ARM Cortex-M , and BeagleBone , developing robust systems. Skilled in protocols like UART , SPI, and I2C , with experience in RTOS and Linux integration. Passionate about IoT, creating real-time applications using embedded technologies. Adept at collaborating in teams to deliver reliable, scalable solutions tailored to industry needs.
    Featured Skill ARM
    Microprocessor
    Microcontroller
    ARM Microcontroller
    Embedded Operating System
    Embedded Linux
    Embedded C
    Python
    C
    Driver Development
    Linux
    STM32
    Arduino
    ESP8266
    ESP32
    FreeRTOS
  • $10 hourly
    • 0.0/5
    • (0 jobs)
    I’m an Electrical and Electronics Engineer with hands-on experience in embedded systems, power electronics, and high-voltage hardware design. I specialize in developing advanced Battery Management Systems (BMS), BLDC motor controllers, and custom multi-layer PCBs with STM32 firmware in C (CubeIDE). I’ve led R&D for a 500W motor driver, a 40kV programmable power supply, and a high-voltage active cell balancing BMS. I bring a strong focus on reliable design, manufacturability, and real-world deployment. Winner of iCreate EVangelise, recipient of MSME and iCreate innovation grants, and Chancellor’s Gold Medalist
    Featured Skill ARM
    Microcontroller
    Arduino
    STM32
    Multilayer PCB
    Digital Electronics
    Analog Electronics
    Embedded C
    ARM Microcontroller
    Electronics
    Power System
    Energy Storage
    Power Electronics
    PCB Design
    Embedded System
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Top cities for ARM Programmers in India
Show more