Hire the best AutoCAD Drafters in Ohio

Check out AutoCAD Drafters in Ohio with the skills you need for your next job.
  • $57 hourly
    If you’re looking for a high-quality drafting service, you’ve come to the right place. At Archeton CAD Drafting Services, we’ll give you the attention and service you’ll come to expect and enjoy. There is no project too large or too small, and we thrive on the opportunity to work with new people with new and innovative ideas. We believe that the more communication there is about a project, the more successful that project will be. We believe everyone has great ideas, and the more input about something being designed, the better it is. * Always full scale, dimensionally accurate CAD files Our Services: - Architectural Millwork Shop Drawings, - Architectural 2D design/drafting, - Telecom drawings, - PDF/Hand Drawings to CAD conversion, - Interior Design drafting, - Stone Shop Drawings, - Fire Escape Plans and location maps, - Fire Protection plan drafting, - Signage Shop Drawings Please get in touch with us for relevant samples of our work.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Architectural Design
    Autodesk Architecture
    PDF Conversion
    CAD
    Autodesk AutoCAD
    2D Design
  • $35 hourly
    I'm a licensed Interior Designer with a degree in architecture. I have experience in creating construction documents, selecting finishes, creating sample boards, selecting and procuring furniture. Currently looking for a little bit of side work to fill my free time.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Drafting
    Color & Trim Design
    Office Space Planning
    Interior Design
    Furniture Design
    Space Planning
    Autodesk AutoCAD
  • $50 hourly
    Interior Designer specializing in consultations, furniture specification, material selections, and mood boards. I hold a Bachelor of Art in Interior Design and have five years of experience in the Design industry. I have experience working with investors to furnish and design short term rental properties - Air Bnb, VRBO, Furnished Finder, etc. Let's chat about your next project! I can help my clients take their design visions and make them reality.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Construction
    Microsoft Office
    Adobe Creative Suite
    Commercial Design
    Construction Document Preparation
    Specifications
    Drafting
    Real Estate
    Interior Design
    Autodesk Revit
    Autodesk AutoCAD
    Residential Design
    Office Design
    SketchUp
  • $85 hourly
    Professional Summary: Began with an Arch Struct engineering degree I spend many of my early years in those pursuits. And then as the resume shows, I graduated every few years into more important roles. Project Engineering Managing to the final customer. Of course I love the fundamentals, Not afraid to step back to those and get things done. Architectural Structural Mechanical engineering. Even Structural Detailing is still a pleasure. Piping systems exhaust ductwork systems even product design. Lean manufacturing too I eliminate waste. I know where to look. Let's meet and talk, Regards, Gene
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Mathematics
    Facility Design
    Architectural Drawing
    Physics
    VB.NET
    3D Modeling
    Architectural Design
    3D Animation
    Office 365
    Lean Manufacturing
    Failure Mode & Effects Analysis
    Industrial Engineering
    Structural Detailing
    Structural Engineering
    Autodesk AutoCAD
  • $80 hourly
    Hello! I'm an electrical engineer who has led the development of many consumer electronic products. One of which even appeared on Shark Tank! I have a strong knowledge in physical prototype development (3D printers/laser engravers/CNC routers/wiring/bread boarding/PCB design). I also have 8 years' experience with C/C++. Pretty much everything needed to do prototype product design! After prototyping, I have the ability to convert the designs into mass-manufacturable products (DFM). I have also worked intimately with factories to develop SOPs for product mass production using Lean Six Sigma (LSS) methodologies. All together, I have spent over 6 months in Chinese factories getting products mass manufactured. All said: I can help you design your project or product start to finish!
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Antenna Design
    Product Management
    SolidWorks
    Circuit Design
    3D Modeling
    Modeling
    Autodesk AutoCAD
    Microcontroller
    Arduino
    C++
    ESP32
    Prototype Design
    PCB Design
    Consumer Electronics
    Product Design
  • $55 hourly
    Katherine is an experienced interior designer with over 12 years spent transforming spaces through thoughtful design. She specializes in residential, hospitality, and retail design, and has led award-winning projects for multiple multi-family properties. Her design approach is to create spaces that are beautiful, functional, and timeless through the use of color, texture, lighting, and furnishings. Some of her design accomplishments include major retail store rollouts for national brands, luxury home makeovers, and renovations for upscale hotels and resorts. Katherine's work has been featured in design publications for its innovative yet livable style. studiothomasinteriors. com
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Adobe Acrobat
    Commercial Design
    Adobe InDesign
    Adobe Photoshop
    SketchUp
    Autodesk AutoCAD
    Residential Design
    Interior Design
  • $60 hourly
    I am part of a team with strong knowledge that enables us to design modern and creative buildings that meet our clients' requirements. We are an engineering team with licensed engineers located in multiple U.S. states providing civil, architectural and structural engineering services. Our team places customer satisfaction above all else. We are committed to building long-term relationships with our customers and go the extra mile to ensure their success. Customer satisfaction is our ultimate goal. We are familiar with U.S. building codes as well as international building codes and can provide signed and sealed civil and architectural drawings, structural drawings, and structural calculation reports for city permits. The quality of our work is top-notch and we will not disappoint you. ✔ Civil & Structural Engineering design and drawing for city permit. ✔ Architectural Plan and permit drawing for city permit. ✔ Structural Analysis, details, calculations report. ✔ Mechanical Engineering design and drawings for permit. ✔ MEP Engineering Design of Residential, Industrial and Commercial projects. ✔ Stamp for permit. ✔ CAD modeling (SolidWorks, Solid Edge, Autodesk Inventor, Fusion360) ✔ Engineering drawings ✔ Engineering analysis ✔ Technical writing
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    AutoCAD Civil 3D
    Autodesk Revit
    SketchUp
    Building Design
    MEP Design
    Civil Engineering
    Autodesk AutoCAD
    Tekla Structures
    SAP2000
    Structural Analysis & Design Software
    Structural Analysis
    Structural Drawing
    Structural Engineering
    Architectural Drawing
    Architectural Design
  • $85 hourly
    I develop entire site design and landscape design packages including master planning, irrigation, materials detailing, and planting plans (for aesthetics and for food). I excel in customizing outdoor spaces tailored to my client’s needs. I design for durability, beauty, cost-effectiveness, and functionality coming from a background of experience in designing for dry environments. I have design, drafting and project management experience in governmental, residential and commercial projects. I hold a Bachelor’s degree in Landscape Architecture and a Master's of Landscape Architecture. I'm a PhD researcher and instructor at Kent State University in Cleveland Ohio. I have over 15 years experience in landscape architecture/design and environmental consulting projects. I offer my services in site planning, landscape design, grading plans, stormwater management plans and calculations, construction management, project management, report writing, and grant proposal writing. I am also available for consulting.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Urban Planning
    Gardening
    Writing
    Environmental Science
    Landscape Design
    Sustainable Energy
    Adobe Creative Suite
    Report Writing
    Project Management
    Autodesk AutoCAD
  • $40 hourly
    I am an architectural designer proficient in industry standard tools to produce quality visuals as well as the know-how of translating models from the digital to the physical using digital fabrication methods. Plenty of experience with 3D model making using Rhino3D, and creating elevation, section, and plan drawings as well as renders using Vray to apply material mapping and control lighting.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Adobe Illustrator
    Architectural Rendering
    Interior Architecture
    3D Modeling
    Autodesk AutoCAD
    Rhinoceros 3D
  • $150 hourly
    Licensed PE in Ohio and Kentucky. Civil engineering design and management professional with 13 years of experience. Extensive engineering expertise analyzing, designing, and preparing reports and drawings pertaining to hundreds of residential, commercial, and industrial engineering structures and projects, across all 50 US states, Canada, Latin America, and the Caribbean. - reinforced concrete, steel, aluminum, plastic, wood, stone structure types in a wide variety of applications - buried pipes and arches - solar racking structures including hundreds of rooftop, ground-mount, and carport projects - footings and deep foundations - bridge abutments - retaining walls - slopes - ground improvement with geogrid and stone columns - geosynthetics Thousands-hours experience using engineering design and analysis software and conducting finite element analysis for geotechnical and structural design applications, including in CANDE, Plaxis, RISA, Staad Pro, and SAP 2000. Detailed knowledge of US and Canadian design codes including IBC, ASCE 7, NBCC, CSA, AASHTO, AISC, ACI, AISI, NBCC, ADM, NCSPA Development of automated engineered product calculators for use by clients and their customers Proven skills in: - Engineering - Project Management - Client relationships
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Autodesk Revit
    Autodesk AutoCAD
    Structural Analysis & Design Software
    Structural Analysis
    Solar Design
    Civil Engineering
    Finite Element Analysis
    Wind Load Assessment
    Reinforced Concrete Structures
    Calculation
    Structural Engineering
    Steel Structure
    Wooden Structure
    Soil
  • $30 hourly
    I'm an architectural designer with expertise in 3D modeling, rendering, and visualization tools. I've worked on a variety of projects from residential to large commercial projects. • I use all major 3D modeling programs such as Revit, Rhino, and Sketchup. • Visualization tools include VRay, Enscape, Unreal Engine and Unity • I specialize in modeling complex geometry through computational design • I utilize coding programs such as Python, Grasshopper, and Dynamo • I’m an efficient worker and strive for perfection in my projects
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    KeyShot
    3D Printing
    Unity
    Architectural Rendering
    Adobe Creative Suite
    Virtual Reality
    Photorealistic Rendering
    V-Ray
    3D Modeling
    Autodesk Revit
    Autodesk AutoCAD
    SketchUp
    Rhinoceros 3D
  • $50 hourly
    OBJECTIVE: To obtain a project engineering manager position with an organization that provides a challenging work environment and allows me to utilize my technical skills, business education, and experience background to add value to the organization., Key experience: * Engineering, CAD designer * Experienced in leading projects, Project Management/ Microsoft project * Expert in Light Tools, Photopia optic design software for commercial and airfield lighting * Expert and proficient in Pro- Engineer (Creo), Autodesk/AutoCAD/Inventor, Solid Works, and Upfront CFDesign Flow & Thermal Solutions, FEA for structure and heat transfer engineering software. * Design for Manufacturing and Assembly (DFMEA) * Engineering drawings (ANSYI/ASME Y14.5), GD&T * Organized Kaizen events for Cost Reduction, Lean manufacturing * Customer interface and support of sales group * Excellent in internal and external Communications
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Autodesk AutoCAD
    ANSYS
  • $30 hourly
    Hello! My name is Taylor Getz and I have 4 years of experience in 2D and 3D modeling and design. I primarily use Revit 2020-23 and AutoCAD 2023 to do my work. I am excellent at making parts and highly detailed items using both Revit Families and in AutoCAD 3D. I have worked on over 22 solely architectural layout projects, 18 either mechanical or electric layout projects, 10 machine part making projects, as well as several other vaguely construction projects. I look forward to learning about your project/s and helping you achieve the results you want.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Architectural Rendering
    Architectural Design
    2D Design & Drawings
    3D Modeling Software
    Electrical Engineering
    Mechanical Design
    Design Analysis
    Construction Document Preparation
    Autodesk BIM 360 Glue
    Pre-Construction
    Autodesk AutoCAD
    2D Design
    Autodesk Revit
    3D Design
    3D Modeling
  • $40 hourly
    Power BI Expert | Data Visualization | Custom Dashboards | Paginated Reports | Dataflows Are you looking to transform your raw data into insightful and interactive dashboards? As a passionate Power BI expert with 5+ years of experience, I specialize in creating dynamic, visually compelling reports that drive decision-making and reveal critical business insights. 🔹 What I offer: Custom Power BI Dashboards tailored to your needs Data Modeling & ETL (Extract, Transform, Load) processes DAX calculations and advanced measures Interactive Visualizations with filters and slicers KPIs, Metrics Tracking, and Reports for business intelligence Paginated Reports SharePoint lists and functionality Data Cleaning and Transformation using Power Query Connections to multiple data sources (Excel, SQL, OData, etc.) I take pride in delivering accurate, timely, and user-friendly reports, whether you’re tracking sales performance, financial metrics, or any other key data for your business. Let’s elevate your data and empower your decision-making! Reach out today to discuss your project.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Spreadsheet Skills
    PostgreSQL
    SQL
    Teaching
    Analytical Presentation
    Process Improvement
    Economics
    Microsoft Power BI
    Information Analysis
    Data Analysis
    Business Development
    Continuous Improvement
    Autodesk AutoCAD
    Microsoft Excel
  • $30 hourly
    I'm a 3D Visualizer with experience in realistic still renderings as well as animation sequences. It doesn't matter the scale of the project if you have a thought in mind I can bring it to life
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Adobe Creative Suite
    Studio
    3D Animation
    Arts
    3DS
    Visual Art
    3D Lighting
    3D Modeling
    V-Ray
    Autodesk AutoCAD
    Adobe Photoshop
    3D Texturing
  • $35 hourly
    As someone who has spent countless hours working with 3D modeling software such as Inventor, I have gained a deep appreciation for the power and versatility of modern technology. From designing intricate machine parts to creating stunning architectural models, I have seen firsthand how 3D modeling can bring even the most complex concepts to life. When I'm not at my 9-5, I enjoy getting my hands dirty in the great outdoors, working on landscaping projects, hiking, fishing and connecting with nature. I look forward to the possibility of helping you design your next project from start to finish.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Microsoft Outlook
    Microsoft Excel
    System Automation
    MATLAB
    Mathematics Tutoring
    Landscaping
    Presentations
    Mathematics
    Microsoft Office
    3D Modeling
    Autodesk AutoCAD
    Autodesk Inventor
    3D Design
    SolidWorks
  • $80 hourly
    Licensed Professional Engineer (PE Stamp) in: CA, MD, NJ, PA, DC, VA, SC, CT, WA, OH, WV, FL, IL, NY, MA, RI, ME, MI. Structural design and calculation are carried out to review whether it conforms to the US building code, and the PE's letter is sealed. I will model, Analyze & Design of any kind of structure using Software's Like: CSI ETABS, CSI SAP2000, CSI SAFE, CFS Designer, IDEA STATICA (Connection Design Software), TEKLA Structural Designer, TEKLA Structures, STAADPRO. I will do the Detailing/Drafting Using Software's like: Autodesk AutoCAD, Autodesk Revit, Advance Steel Particular Expertise in: ✔️ Structural analysis and design (Residential, Commercial, Industrial, Bridges) ✔️Evaluation of existing structures ✔️ Forensic Engineer. Report Review. Opinions validation. ✔️ Repair & Strengthening of Structural Systems ✔️Design of Roof-Mounted Solar Photovoltaic (PV) Systems ✔️Design of Fall Arrest Systems per OSHA requirements ✔️Engineering assistance in Permitting Process (Review and PE Stamp) ✔️ Provide a second opinion review of third-party structural plans and reports. ✔️Value engineering design optimization for cost saving ✔️US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) ✔️US Bridge Code (AASHTO) ✔️Wind load calculations ✔️Snow load calculations ✔️Seismic load calculations ✔️ Flood resistant design ✔️Earth retaining structures and foundation design...
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Finite Element Analysis
    SAP2000
    Civil Engineering
    AutoCAD Civil 3D
    Reinforced Concrete Structures
    Tekla Structures
    Wooden Structure
    Steel Structure
    Autodesk Revit
    Autodesk AutoCAD
    Structural Engineering
    Structural Analysis
    Structural Drawing
  • $80 hourly
    1. Provide engineering support to the projects. Engineering includes, but is not limited to: - design of temporary structures (falsework, formwork) - design of temporary soil retaining systems (shoring, trenches, slopes) - design of hardware (rigging, falsework removal, etc.) - heavy equipment planning (bridge crossing, ground bearing, crane use, etc.) 2. Draft plans for all designs 3. Visit project sites and collaborate with field personnel (superintendants, foremen, project… 4. -Design of falsework, shoring, column guying, etc. needed for bridge construction. -Frequent use of AutoCAD -Work closely with field engineers on multiple bridge projects (Coordinate with RE, subcontractors, foreman, etc., Review/decipher civil/structural plans, Assign work performed/material purchased to proper job codes) 5. Work closely with senior engineers on various tasks dealing with bridge design (Perform detailed bridge quantities, study bridge/retaining wall design, create various spreadsheet templates) 6. -Knowledge and hands-on-experience with building materials/ lumber/hardware used in structure design (lightframe, concrete, masonry, steel) -Personable skills gained from 7 years of interacting with customers and selling product -Expert skills with forklift/power equipment -Efficient product assembly 7. Tutors students in the subjects of math and physics resulting in dramatic increase in students’ grade percentage 8. CCTV analysis/inspection of local sewer pipes. 9. -Programmed CNC lathes to cut material based on dimensions and tolerances specified on AutoCAD prints -Ran Machines to obtain specified quantities, measuring parts, de-burring parts, variety of shop tool experience 10. Courses -Advanced Foundations -Architectural Drafting -AutoCAD -AutoCAD II -Bridge Design -Concrete Structure Design -Dynamics of Structures -Earthquake Geotechnical Engineering -Earthquake Structural Engineering -Finite Element Analysis of Structures -Foundation Design -Highway Design -Light-Frame Structure Design -Masonry Structure Design -Open Channel Hydraulics -Prestressed Concrete Structures -Steel Structure Design -Structural Analysis -Structural Analysis II -Traffic Flow Control
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    MEP Design
    Civil Engineering
    Steel Detail Drawing
    Steel Structure
    Finite Element Analysis
    Earthquake Engineering
    Structural Dynamics
    Structural Analysis
    Structural Engineering
    Structural Drawing
    Reinforced Concrete Structures
    AutoCAD Civil 3D
    Autodesk AutoCAD
    Architectural Drawing
    Architectural Design
  • $50 hourly
    SUMMARY Experienced electrical engineer with over 11 years in electrical system design, power distribution, and lighting. Skilled in 3-phase AC power, lighting control system design, and emergency power/lighting. Proven ability to interact with architects and clients to coordinate and specify electrical systems. Eager to contribute to your engineering team by leveraging technical skills and innovative solutions.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Power Distribution
    Mechanical, Electrical & Plumbing Systems
    National Electrical Code
    Electrical Design
    Autodesk AutoCAD
    Autodesk Revit
    Photometric Analysis
    Lighting Design Software
    Lighting Design
    Engineering & Architecture
    Electrical Engineering
  • $35 hourly
    I'm a Video and Audio Engineer specializing in Broadcasting, Live Event Streaming, and AV Electrical Fabrication. Whether you need expert shading for your next event, seamless broadcast transmission to a major network, optimized video conferencing and AV setups for your office, or custom cable fabrication to get the perfect shot, I'm your go-to professional. Some of my certifications and relevant experience: - Six Sigma Green Belt - Audinate - Dante Audio Level 1 & 2 - Blackmagic Design - Grass Valley Systems - Teams, Zoom, OBS
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Six Sigma
    VoIP
    AV Equipment
    Live Streaming Setup
    Autodesk AutoCAD
    Technical Support
    Audio Engineering
    Radio Broadcasting
    TV Broadcasting
    Electrical Engineering
    Broadcast Engineering
  • $75 hourly
    Matthew McKimmy | Founder & Owner of MC3D | Expert Product Designer & Plastics Engineer With two decades of professional experience in design, engineering, and manufacturing, I am the founder of MC3D, a design engineering firm based in Columbus, Ohio. Since 2013, I have built MC3D into a trusted partner for clients ranging from small businesses and venture capital firms to intellectual property attorneys and independent inventors. Specializing in 3D CAD design, 3D printing and prototyping, technical drawings, and manufacturing support, I help my clients bring their concepts from idea to market-ready product, ensuring precision, manufacturability, and cost-efficiency at every stage. Core Services: 3D CAD Design: Using SolidWorks and other advanced CAD tools, I transform ideas into detailed, functional 3D models that clients can visualize, refine, and test in real-time. These models are designed for both performance and manufacturability. 3D Printing & Prototyping: With rapid prototyping capabilities, including 3D printing, I help clients validate designs before mass production. This stage is crucial for identifying potential issues early, ensuring that the final product meets both design and functional goals. Technical Drawings: I provide detailed technical drawings that include precise dimensions, material specifications, and assembly instructions. These drawings are essential for manufacturing, ensuring that production processes are seamless and efficient. Manufacturing Support: From material selection to production methods, I offer expert guidance to help clients optimize manufacturing processes and ensure that products are durable, cost-effective, and designed for mass production. Understanding MC3D Since its inception in 2013, MC3D has established itself as a trusted provider of mechanical design and manufacturing consulting services. Serving clients across the United States and internationally, I specialize in plastic components and consumer goods, offering end-to-end product development—from initial concept to full-scale production. My clients rely on MC3D’s deep knowledge of design and manufacturing processes to bring innovative products to market with efficiency, precision, and cost-effectiveness. Who Are MC3D’s Typical Clients? Small to Large Businesses: I work with companies of all sizes that need support navigating the complexities of design, prototyping, and manufacturing. These businesses often lack in-house engineering resources and turn to MC3D as an extension of their team, bridging the gap between ideas and market-ready products. Independent Inventors: Independent inventors come to MC3D with groundbreaking ideas but often lack the technical expertise to develop them. I offer the support needed to turn napkin sketches into functioning prototypes and ultimately market-ready products. What MC3D Offers to Its Customers MC3D’s holistic approach to product development ensures that every product meets its design intent, optimizes manufacturing processes, and is positioned for market success. Here's what I provide: End-to-End Product Development: From detailed designs and 3D models to functional prototypes and manufacturing support, I guide clients through every step of the process, ensuring their products are both innovative and manufacturable. Expertise in Plastic Components and Consumer Goods: With specialized knowledge in plastic components, I ensure that products are durable and cost-effective, addressing every step of the design process—from material selection to mold design. Advanced CAD Modeling and Drawing: My CAD modeling expertise enables customers to visualize their products in 3D and generate precise 2D drawings required for manufacturing. This ensures accuracy and streamlines communication. Licensed Professional Engineering Services: As a licensed engineering firm, MC3D ensures that all designs meet the highest standards of safety, functionality, and compliance. Cost and Lifecycle Optimization: I focus on reducing production costs and optimizing product lifecycle to ensure that clients achieve maximum value and return on investment. The Typical Customer Journey with MC3D Initial Concept and Consultation: Clients bring in their initial ideas or rough concepts. We conduct a consultation to understand the product’s purpose, target market, and technical requirements. Detailed Design and Modeling: I create a detailed 3D model using advanced CAD tools. Clients can visualize and refine their design before moving to prototyping. Prototype Development: I produce functional prototypes to help clients test and validate their designs. This step is crucial for identifying and addressing potential improvements. Manufacturing Support: With my expertise in material selection and manufacturing processes, I guide clients to ensure a smooth transition from prototype to mass production. With a strong commitment to precision and innovation, I help clients turn their ideas into reality.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Consumer Goods
    Plastic
    Injection Mold
    Medical Device
    Mechanical Engineering
    Product Design
    Mechanical Design
    3D Design
    Autodesk AutoCAD
    SolidWorks
    3D Rendering
    3D Modeling
    2D Design
    3D Printing
  • $75 hourly
    Available for Project Review Meetings ensuring your design is suitable for manufacturing With over two decades of manufacturing and fabrication experience, I specialize in developing napkin sketches into production ready prototypes. Not sure what the next step is? I'm also available for consultations to discuss the viability and optional paths to complete your project. Let's get in touch and show me what we're working on!.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    3D Printing
    Product Design
    3D Drawing
    Mechanical Engineering
    Product Development
    Prototyping
    Mechanical Design
    Custom Part Design
    CAD
    Autodesk AutoCAD
    3D Design
    3D Modeling
    SolidWorks
    3D Rendering
  • $40 hourly
    Exceptionally accomplished and reliable Architect with a strong client satisfaction record across a wide variety of residential and corporate building projects. Adept at handling multiple projects simultaneously with the highest degree of accuracy and professionalism. Able to explain complex building concepts and processes clearly and intelligibly. CORE QUALIFICATIONS • Highly developed verbal and written communication skills demonstrated through consistent distinction results for written assignments and class presentations • Communicate confidently and effectively with people at all levels and from diverse backgrounds- • Wide breadth of experience in constructing houses and office buildings. • Strong knowledge of architectural design principles methods techniques and tools • High expertise in materials sourcing and management • Exceptional commitment to construct safe and beautiful residential and corporate spaces • Outstanding customer service skills • Superior written and oral communications abilities • Wide breadth of experience in constructing and repairing houses, roads, and office buildings. • Strong knowledge of architectural design principles methods techniques and tools • Good knowledge in residential, commercial, and good detailing in interior design. • High expertise in materials sourcing, site management and Coordination with other teams members. • Exceptional commitment to construct safe and beautiful residential and corporate spaces • I am good at designing, detailing, and presentation of drawings • Well gripped knowledge in 3D software like 3ds max, sketch up and v-ray, Revit & Navis, Photoshop, illustrator and exceptional Lumion walk-throughs. • Outstanding customer service skills • Superior written and oral communications abilities. • Proven eye for detail in documentation - from design development through to construction • Flair for both schematic and concept design • 3D visualization • Design presentations and good drawing Skills • Strong knowledge of construction methods and detailing. • Proficient in AutoCAD, Revit, Autodesk 3D Studio Max, Sketchup 3D, Autodesk Navis Adobe Photoshop & Illustrator, Lumion For 3D Visualization and Microsoft Office suite • Work effectively in a team, both as a leader and a team member, proven through successful group assignments at university and in current employment • Consistently completed all documentation before deadlines.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Adobe After Effects
    Autodesk Navisworks
    Lumion
    Adobe Photoshop
    Autodesk AutoCAD
    V-Ray
    SketchUp
    Adobe Illustrator
    Autodesk 3ds Max
  • $30 hourly
    I am proficient in AutoCAD, SolidWorks, SketchUp, & Fusion 360. I enjoy making all sort of drawings, nuts & bolts, spaceships, buildings, motorcycles, etc. I am most familiar with Solidworks, Inventor, & Fusion 360. I have 20 years of Harley-Davidson experience. I would one day like to design motorcycles for Harley-Davidson or create patent drawings for patent applications. Don't be afraid to call on me to help. Thanks.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Computer Maintenance
    Computer Skills
    Machine Learning
    Cross Functional Team Leadership
    SketchUp
    SolidWorks
    2D Design
    Autodesk AutoCAD
    3D Rendering
  • $17 hourly
    Greetings! I am a dedicated and ambitious Architecture Student at Columbus State Community College, also serving as a skilled Technical Drafter for Team Fishel. With a strong passion for design and an eye for detail, I possess a diverse skill set, including proficiency in manual drafting, AutoCAD, Revit, and SketchUp.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Blender
    Autodesk Maya
    2D Design
    AutoCAD Civil 3D
    Autodesk AutoCAD
    SketchUp
    Autodesk Revit
    Adobe Photoshop
    Adobe Illustrator
  • $15 hourly
    Mechanical Engineer graduate in the summer of 2023, looking to secure an remote data-entry job to gain experience and enhance my skills.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    Data Modeling
    Mechanical Engineering
    3D Modeling
    Autodesk AutoCAD
    CAD
    SolidWorks
    CREO
    MATLAB
    Microsoft PowerPoint
    Microsoft Word
    Microsoft Excel
    Data Entry
  • $20 hourly
    Mechanical Engineer | Development and Manufacturing experience 10 years experience in 2D/3D modeling software - Drafting, modeling, machining and design validation. Software experience: Solid Works, Solid Edge and Inventor Majority of work experience centers on managing product designs including new product development and sustaining current products. HIGHLIGHTS * Mechanical Engineer with Manufacturing, R&D, and Management Experience. * Working knowledge of software and electrical engineering. * Extensive experience in New Product Development. * Highly organized and efficient project management skills. * Led multiple cradle-to-grave product/process development projects.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD
    AutoCAD Plant 3D
    Python
    Solid Edge
    Tinkercad
    Autodesk
    SolidWorks
    Autodesk AutoCAD
    Mechanical Engineering
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by 5M+ businesses