Upwork home
Sign up
Secondary

Hire the best Embedded C Programmers & Developers in Lahore, PK

Check out Embedded C Programmers & Developers in Lahore, PK with the skills you need for your next job.
Hire freelancers
Clients rate Embedded C Programmers & developers
Rating is 4.8 out of 5.
4.8/5
based on 148 client reviews
  • $40 hourly

    • 5.0/5
    • (13 jobs)
    Dedicated embedded firmware engineer with over 5+ years of professional experience developing complex embedded products, able to provide innovative solutions to the challenges in IoT and embedded systems domain. Services: • Embedded and Real-Time Systems Design • Board bring-up and testing • Bare-metal and RTOS firmware development • Embedded Linux application development Skills: • Programming Languages: C, C++ • Operating Systems: FreeRTOS, Zephyr rtos, TI-RTOS, Micrium Kernel OS-III, • Hardware Interfaces: I2C, SPI, USB FS/HS, UART, • Networking: TCP, UDP, NTP, HTTP, MQTT, • Processors: ARM cortex M4 and M0+, STM32, TI TM4C, EFM32, Nordic nRF52, ESP32 IOT devices: • Cellular Devices (nRF9160, Telit-LE910, u-blox SARA-R4, u-blox SARA-U2, u-blox Toby- R2, u-blox Lara-R2, u-blox Lara-R3, u-blox Lisa-U2) • WiFi Devices (ESP32, TI CC32 series) • BLE Devices (nRF528xx, nRF5340) • GNSS Devices (u-blox Zoe M8)
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    BLE
    WiFi
    Microcontroller Programming
    nRF52
    Firmware Programming
    STM32
    ESP32
    ARM Cortex-M
    Embedded System
    Python
    C++
    C
  • $15 hourly

    • 4.9/5
    • (14 jobs)
    A passionate embedded systems expert, specialized in providing comprehensive hardware and firmware solutions for Industrial and Consumer devices. With a proven track record of 5+ years working with international clients, I've contributed to diverse technology sectors such as IoT, Industrial IoT, Smart Homes, Automated Irrigation, Healthcare, Wearable ,Telemetry, and Consumer Electronics / Gadgets. As a seasoned product development expert, I offer end-to-end solutions, transforming your ideas into reality with precision and efficiency. My roadmap includes: ● Requirement Analysis. ● Research Relevant Market Norms and Standards. ● Key Component Selection. ● Proof of Concept. ● Firmware Release - 1st Iteration. ● Circuit and PCB Design. ● Enclosure Design. ● Firmware Release - 2nd Iteration. ● Prototype. ● Firmware Release - 3rd Iteration ● Production Ready Device. Services: ✔️ Firmware Development - Bare Metal + FreeRTOS. ✔️ System Architecture Design. ✔️ Code Review. ✔️ Firmware Patching ✔️ Troubleshooting and Bug Fixing. ✔️ Circuit Design & Schematic Capture - Altium ✔️ PCB Layout. ✔️ Product Development. ✔️ Prototyping. ✔️ Circuit and PCB Review. Skills: ✔️ Embedded C/C++. ✔️ FreeRTOS. ✔️ STM32. ✔️ STM8 ✔️ PIC32. ✔️ Nrf52840 ✔️ TCP/IP (MQTT & HTTP). ✔️ LoRaWAN ✔️ CAN ✔️ XBee ✔️ Bluetooth 5.0. ✔️ Wi-Fi ✔️ Circuit Design & PCB Layout ✔️ Bootloader.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Prototyping
    Circuit Design
    PCB Design
    Electronics
    Bluetooth LE
    MQTT
    FreeRTOS
    Raspberry Pi
    Firmware
    Arduino
    nRF52
    STM32
    PIC32
  • $35 hourly

    • 5.0/5
    • (8 jobs)
    Embedded system engineer 4+ years of shown and hard core experience of working with embedded systems. Refined engineering professional with Master degree in Embedded and Computer engineering. Services: • Bare-metal and RTOS development.. • Network programing. • Schematic design and printed circuit board (PCB) layout. • Linux programming • Altium PCB designing Skills: • Programming Languages: C, C++, Python. • OpenSSl, mbedTLS, wolfssl, micro-ecc • Operating Systems: FreeRTOS, TI-RTOS. • Processors: ARM cortex M4 and M0, STM32, TM4Cxx, EFM32, ESP32, PICxx, Arduino • Hardware Interfaces: I2C, SPI, FAT file system, USB FS/HS, UART, Ethernet, Modbus, RS-232, RS-485, CAN. • Networking: FTP, TCP, UDP, NTP, HTTP, MQTT, • ESP-IDF / Keil uVision / IAR / MPLAB / Stm32cubeIDE / Atollic True-Studio / SVN / GitHub / Visual Studio / Xilinx ISE / JIRA/ JAMA/ PERFORCE IOT devices: • Cellular Devices (mainly u-blox devices) • WiFi Devices (ESP32, TI CC32xx series) • GNSS Devices (u-blox M8)
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Ubuntu
    Firmware Programming
    PCB Design
    C++
    C
    Real-Time Operating System
    Arduino
    Embedded Linux
    Microcontroller Programming
    Embedded System
    Python
    Raspberry Pi
    ESP32
    STM32
  • $40 hourly

    • 4.9/5
    • (5 jobs)
    🚀Has any of your products come alive and entered mass production.......? ✅Well, with more than 6 years of experience in designing high tech industrial solutions and consumer products, I can help you bring your product to the market in a short time span. ✅Having successful track record of developing more than 20 products for IoT applications with multiple products in mass production. ✅Offering one window solution for complete product development, from Ideation to Mass Production. Product Design Expertise: -Design Concept -Product 3D Model and Photorealistic Renders (Solidworks) -Analysis (ANSYS) ELECTRONICS and IOT Expertise: -PCB Design (Altium and Eagle) (1-12 Layers) -STM32, Arduino, Raspberry pi, Xilinx and Hi-Link Development boards -MCU: ARM, TI , PIC, Atmel -MPU: ARM Cortex, Broadcom, MediaTek -Wireless: GPRS, GSM, 4G LTE, NB IoT, BLE 4.0/5.0, Wi-Fi, Wi-Fi Direct, LoraWAN -Analysis (Power Integrity, Signal Integrity, EMC) FIRMWARE Expertise: -MCU firmware in C/C++, Keil, FreeRTOS, Arduino, Eclipse, Nordic SDK -MPU firmware in C/C++, Embedded Linux, ESP-IDF -FPGA firmware in VHDL and Verilog PROTOTYPING Facilities: -Rapid Prototyping (3-D Printer) -PCB Prototyping, debugging, and validation.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    SolidWorks
    Electrical Engineering
    Raspberry Pi
    WiFi
    BLE
    LoRa
    ESP32
    STM32
    Embedded Linux
    Product Design
    Firmware
    PCB Design
    Internet of Things Solutions Design
  • $60 hourly

    • 4.9/5
    • (5 jobs)
    Working as an embedded systems developer, in a renowned corporation, as my day job, I visit Upwork every once in a while to take a break from routine find some other exciting thing to work on. I have diverse experience of working on Linux-based BSP development for Arm, Arm64, x86, and MIPS SoCs, kernel device drivers, testing, working on bash and python-based frameworks, and with many modern-day tools and hardware. I can: - Get your BSP up and running in a short period - Make bootloader, kernel, and userspace optimizations, and boot time improvements - Implement features spanning bootloader, kernel, userspace, and middleware like OTA updates, automatic update recovery at each stage, hardware root of trust implementation, encrypted boot, etc. - Do custom device drivers like I2C, SPI, DMA, USB, Platform devices, graphics, multimedia, video pipeline, etc. - Yocto project layers, help with CI/CD infrastructure, and much more!
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Jenkins
    CI/CD
    Kernel
    Git
    Software Debugging
    Agile Project Management
    Jira
    Firmware Programming
    Embedded System
    Python
    Embedded Linux
    C
    Firmware
  • $35 hourly

    • 5.0/5
    • (5 jobs)
    As an experienced IoT engineer with 2-3 years of experience, I have a strong background in developing IoT solutions for tech startups in Berlin. I am well-versed in the AWS Greengrass IoT core tech stack, including both version 1 and version 2, and have extensive experience working with AWS services such as S3, Lambda, DynamoDB, EC2, and more. One of my areas of expertise is customizing operating systems for edge devices using Yocto, including the addition of new drivers. I have experience working with RAUC and Hawkbit to facilitate over-the-air updates, ensuring that devices remain up-to-date and secure. In addition to my technical skills, I am proficient in Python Flask and have used it in several projects to build APIs and web applications that interface with IoT devices. Overall, my experience as an IoT engineer has allowed me to develop a deep understanding of the technology and its applications, and I am confident in my ability to deliver high-quality solutions to meet the needs of clients.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Embedded System
    Node.js
    Internet of Things
    AWS Greengrass ML
    Azure IoT HuB
    Embedded Operating System
    Embedded Linux
    React
    Raspberry Pi
    AWS IoT Core
    AWS Lambda
    C++
    SQL
    Python
  • $20 hourly

    • 5.0/5
    • (5 jobs)
    Six years of management experience in a corporate environment with experience in professional analytics and dashboards with effective reporting using Excel and Power Bi. I also have python certification from Udemy combined with strong analytical skills of developing algorithms from my Bachelor's degree with proficiency in Matlab, C, C++, Assembly language, and embedded C. Try me out once to see the quality of work with a detail-oriented approach. I'm 100% sure you will consider me for all your future orders
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Spreadsheet Software
    Google Sheets
    Data Analysis
    Microsoft Excel
    Dashboard
    MS Excel
    Microsoft Power BI
    PDF
    C++
    MATLAB
    Web Scraper
    Data Scraping
    Python
  • $20 hourly

    • 4.7/5
    • (3 jobs)
    I am an experienced embedded software engineer. I enjoy working on new ideas/products and making them a reality. I prefer quality over money and looking for a long-term working relationship. Languages:- Embedded C and C++, Python, and Assembly. Dev Kits:- Raspberry Pi, nRFSTM32, Arduino, ESP32, Nordic NRF51, Tiva-C LaunchPad, etc. Interfaces:- Ethernet, Modbus, CAN, USB, BLE, Bluetooth, Wi-Fi, SPI, I2C, UART, RS-232, RS-485
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    GPS
    Linux
    D Software Zephyr
    Electrical Engineering
    Real-Time Operating System
    C
    Python
    Embedded System
    Raspberry Pi
    Firmware
    Embedded Linux
  • $20 hourly

    • 5.0/5
    • (11 jobs)
    With my 3 years of experience in the field of Software Development & Computer Systems, i have been working with different diverse industries that resulted in polishing my skills. I have been working on different projects of Website Development, Mobile App Development & Developing Hardware Solutions Kindly contact me first before ordering, so we can discuss the cost, time and details of the project. Also, I am not offering homework or any Academic related work in this Gig. Few sensors and micro controller examples where i can work fluently zigbee(xbee), Sim808, Sim900, nrf24l01, LORAwan, RFID, Radio wave module, GPS Module, DHT22, DHT11, Photoresistor, Ultrasonic Sensor,knock sensor, Heart Rate Sensor, ECG sensor, MPU6050, MPU9250, MQ135, MQ2, MQ3, Gas sensor, Light sensor, Flux sensor, Fingerprint, scanner, FM Transmitter, SR04, Arduino Robots Arduino UNO, Arduino board STM32, Esp8266, Esp32, BBC Microbit, orange pi, Arduino Leonardo,8051 Microcontrollers, PIC12, PIC16,PIC18 Stm32f4xx ,Stm32f0xx, Stm8, Arm7, Lpc2000, PIR sensor, LDR sensor, L298N module, LCD (1602 +2004), ADB232, ISD1820,HC-R04, OV7670, ADS 9960, BH1750, VEML6070, Gy-906, BMP180 Looking Forward to your Project.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Hardware Design
    ESP32
    Circuit Design
    Technical Writing
    Article Writing
    Embedded Linux
    Embedded System
    Arduino
    PCB Design
    WiFi
    IOTA
    Raspberry Pi
    Bluetooth
    Android
  • $30 hourly

    • 5.0/5
    • (4 jobs)
    I am a top-rated plus freelancer, an experienced embedded system engineer with 8 years of demonstrated history of working in embedded systems. Strong engineering professional with a Master's degree focused in Computer and Electrical Engineering. Services: • Bare-metal and real-time firmware development. • Embedded Linux (System and Kernel Programming), Bash Scripting. • Network programing. • Schematic design and printed circuit board (PCB) layout. Skills: • Programming Languages: C, C++, Bash Scripting, Make, CMake • Operating Systems: FreeRTOS, TI-RTOS, Micrium Kernel OS-III, Embedded Linux • Hardware Interfaces: I2C, SPI, BLE, USB FS/HS, UART, Ethernet • Networking: TCP, UDP, NTP, HTTP, MQTT, • Processors: ARM cortex M4 and M0+, STM32, TI TM4C, EFM32, Nordic nRF52, ESP32 IOT devices: • Cellular Devices (Telit-LE910, u-blox SARA-R4, u-blox SARA-U2, u-blox Toby- R2, u-blox Lara-R2, u-blox Lara-R3, u-blox Lisa-U2, nRF9160) • WiFi Devices (ESP32, TI CC32 series) • BLE Devices (nRF528xx) • GNSS Devices (u-blox Zoe M8)
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Linux
    WiFi
    ESP32
    BLE
    Python
    C
    C++
    Real-Time Operating System
    Embedded System
    Cybersecurity Management
    Embedded Linux
  • $13 hourly

    • 5.0/5
    • (1 job)
    I hold a bachelor's degree in Electrical Engineering from a well-reputed university (335 in the world), with 2+ years of experience in Embedded Systems Design and Firmware Development. Currently, I am working with a German startup as a Firmware Engineer. * I will make your idea come to reality with the best Embedded Hardware Choices. * I can design Firmware for your project. * I can integrate your solution over Cloud with services like AWS IoT Core, and Azure IoT Hub. **Experience: - Worked on STM32 platform - Hands-on experience with ARM, AVR, Raspberry Pi, ESP 32 & 8266 and Arduino Microcontrollers - Experience with Digital Design using Intel and Xilinx FPGAs using Verilog HDL - Experience in Linux, Bash Scripting, ROS, Gazebo - Understanding of I2C, SPI, UART, USB, BLE, and WiFi protocols - Understanding of SDKs, algorithm design, and MISRA-compliant standards for C/C++ - Experience in Pipelining and Scheduling with RTOS for better efficiency
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    C++
    Prototyping
    Firmware Programming
    Real-Time Operating System
    AWS IoT Core
    Azure IoT HuB
    STM32
    Linux
    Python
    Microcontroller Programming
    Arduino
    Verilog
    Arduino Firmware
    Embedded System
  • $25 hourly

    • 4.9/5
    • (12 jobs)
    Greetings! I'm leading to BS in Computer Engineering, having 2 years of experience in Tutoring, development of different softwares. I can help you with following technologies. ✅ C / C++ (OOP, DSA, Communication Protocol UDP/TCP, Audio, OS etc.) ✅ Python (Pandas, Web Scraping, Automation – Selenium, PyTest, Requests etc.) ✅ Java / Kotlin (Android Studio, Audio Applications, Calling Applications etc.) ✅ Scripting (Linux --.sh & Windows -- .bat Scripting etc.) ✅ SQL / MySQL (Procedures, Functions & Data Analysis etc.) Tutoring Expertise: Languages You can Learn: (Basics to Advance with Notes & Examples Solving) ✅ C / C++ ✅ Python ✅ Java / Kotlin ✅ Scripting ✅ SQL / MySQL Courses You can Learn: ✔ CFP (Computing Fundamentals and Programming) ✔ OOP (Object Oriented Programming) ✔ DSA (Data Structures and Analysis) ✔ OS (Operating Systems) ✔ MI (Micro-Controllers & Interfacing) ✔ ES (Embedded Systems) ✔ DSD (Digital System Design) Developemnt Expertise: As a developer I can help you or create ✔ Android Applications with Audio Specification ✔ Simple GUI Based Games Using C++/Python ✔ Automation of Browsers (Edge or Chrome) ✔ Data Analysis Application using Python, SQL etc. ✔ App Scripts for Emails Marketing (Automation of Emails etc.), and Much More ... If you need any kind of help in any kind of technical stuff do contact me, we will have short discussion if you agree we can also have face time / meeting and we can discuss that. I aim to provide the best experience of learning and development and I'll try my best to build your idea into real. Regards, Book a Discussion Slot for Your Projects/Concerns below. Akif Ejaz,
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Embedded System
    Selenium WebDriver
    C++
    Java
    Browser Automation
    Python
    Compliance Testing
    C
    X86 Assembly Language
    Email Automation
  • $22 hourly

    • 5.0/5
    • (3 jobs)
    I am a product design engineering with profound experience in designing and developing simple to complex products, complete prototypes of products and embedded devices, concept designs and designs for mass production. My services include: + 3D modelling and CAD design + Concept modeling and system design + Prototyping and 3D printing with post-processing + Design for Manufacturing for mass production + Embedded firmware development on Arduino, STM, ESP etc. + Electrical system design and testing + Sensor fusion and integration + GUI design for LCD touch and display interfacing + PCB design up-to 4 layers + selection and sourcing of hardware components such as ADCs, sensors, actuators and batteries etc. Whether it's designing a single part for a working system or just an idea in the mind, I'm here to help you out in designing, developing, sourcing and testing the solution of your choice to produce a complete working product. Looking forward to a mutually productive experience with you!
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Embedded Application
    Hardware Prototyping
    ARM Microcontroller
    Electronic Design
    Product Development
    Embedded System
    Sensor
    Microcontroller Programming
    C
    STM32
    Arduino
    STM32F4
    Raspberry Pi
    ESP32
  • $50 hourly

    • 4.9/5
    • (16 jobs)
    I have helped several IoT startups and companies to achieve their business goals. I have worked in different roles primarily as a software developer at u-blox for around 6 years. Currently, I am working as a Team Lead and my team comprises engineers from different backgrounds (Hardware, software, mechatronics, robotics). Additionally, I have also taken up SCRUM master roles where I get to interact/facilitate/mentor teams working on AI/ML, cloud, mobile, and UI/UX. We are developing an exciting indoor home robot - Ruyi. Ruyi is a smart robot for older adults which is able to prevent falls and also provide guided medical exercise programs for rehabilitation. Ruyi is also a care companion to the elderly that will help them to age in place, with grace. Website: ruyi.xavor.com
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Computer Vision
    Wireless Communication
    Electrical Engineering
    ESP8266
    Python
    C++
    PCB Design
    Embedded System
    Microcontroller Design
    Android App Development
    Firmware Programming
    Hardware Prototyping
    Arduino
    Internet of Things
  • $15 hourly

    • 5.0/5
    • (13 jobs)
    Over my last 5 years of experience i have developed may Embedded Devises Industrial/Home usage. According to Clients Requirement , I select Components, Design Circuit and Electronics, Write Firmware, Help in Manufacturing and assembling , documentation and go through the Troubleshooting to make device practical. I have Hands on Experience on 1) ARM Cortex M/A Family, 2) Atmel AVRs and AVR32, 3) PIC family 4) TI System on Chip ICs, 5) Stm32 boards, 6) Raspberry Pi 2/A/B, 7) Beagle Boards, 8) Arduino and different clones, To interface through many Communication layers e.g 1)WiFi (Wiznet) 2)LAN (Wiznet) 3)GPS module Quectel and M80. 4) HY- Bluetooth modules 5) GSM-Sim 900 and Quactel (M72,M95,UG 95) 6) 433 MHz Radio Communication. 7) Infrared Communication short range 8) NFC (Near Field Communication) Using Sensors and module 1) Gyro ,accelro meter ,Gravity ICs 2) A variety of resistive and intelligent Temperature Sensor 3) Capacitive and Resistive Fuel sensors 4) Humidity Sensors 5) Allegro Power ICs 6) CO2 , Ammonia gases sensors. I have made Devices ,among them ,Car tracking Systems, Environmental Controllers ,Power Monitoring Systems , Generator Controllers made huge business.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    PCB Design
    Integrated Circuit
  • $20 hourly

    • 3.7/5
    • (21 jobs)
    Tech Enthusiast with an ongoing bachelors in Electrical Engineering. Self Taught Programmer with a additional skill in of Cyber security. Networking, OS etc. I have a passion to create something new. Something that could be helpful or useless to an ordinary person. I like to dream, design and then build. That's why I chose this field. Try to keep myself in the race. Always upgrading my skill-set. Always learning something new, to understand what the future holds. What the future possibilities, concepts could be. "If you can dream it, you can built it, and if you think it's impossible then upgrade yourself." Because in this world everything is possible as long as you have the will to do it
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Assembly Language
    Electrical Engineering
    ESP8266
    Microcontroller Programming
    Multilayer PCB
    PCB Design
    Arduino Firmware
    ESP32
    ESP8266
    Arduino
    C++
    C
  • $15 hourly

    • 0.0/5
    • (1 job)
    Languages : - English - Urdu Hard skills : - Digital System Design - Verilog - FPGAs - microcontrollers - Programming (Python, C++, C, MATLAB) - Deep Learning - Computer Vision - Electronics Passion : - Computers - Current Affairs About me : I have been a research assistant in the domain of digital system design for 4 years. I have worked on design and layout of ICs at LUMS. I am very comfortable with Verilog. I have done image processing projects too. Microcontrollers fascinate me. The idea of endless possibilities packed into a one small IC is simply amazing. I am comfortable with GPIOs, Timers, Interrupts, PWM, I2C and UART etc. Recently, I have dived deeper in the area of Deep Learning and Computer vision. I am currently involved in projects where we optimize CNNs for the edge devices like ZYNQ and Jetson devices etc.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Electronics
    Arduino Firmware
    Microcontroller Programming
    VLSI
    Atmel AVR
    MATLAB Script
    Xilinx
    Verilog
    Computer Vision
    C++
    Arduino
    Embedded System
    PCB Design
  • $10 hourly

    • 1.0/5
    • (2 jobs)
    We are a team of software and embedded engineers who got their MPhil degrees from well-reputed universities in Pakistan. We have been working in the IT and software industries for 10 years now and have worked with a lot of clients and on a lot of projects. Recently, we designed and built a website and Android application for a reputed country's Election Commission for registering voters and candidates through mobile applications, adding their thumb impressions, and taking their pictures. We have designed this website and application for hassle-free election conduction. Through this mobile app and website, the voter casts their vote at home, the candidate sees their result every time through the website portal, and the admin (the election commission) easily announces the winner. More about our skills: 1. Development skills, BackEnd and FrontEnd web development (NodeJS, Laravel PHP, ReactJS, Laravel, Bootstrap 4, etc.), DMS (MDB, MySQL, ODB), WSD, and mobile app development (Flutter, React Native, ionic). 2. Embedded skills: Microcontroller (Arduino, MSP430/432, TM4C123/1294, STM32, NodeMCU, Atmel, PIC, etc.) Programming using CCS, IAR Embedded Work Bench, Kiel u Vision, Arduino IDE, STM32 Cube IDE, MBED (online and offline), and ATMEL Studio, etc.; Internet of Things development; circuit design using Multisim and Proteus Professional; and schematic diagramming using Fritzing and TinkerCad. 3. Machine learning algorithms for various problems Implement the machine learning algorithms using MATLAB and Python programming. 4. Professional Thesis Writing (BS and MS theses based on research, with and without results) Willing to offer you consultancy services that hopefully will help you to refine your ideas into something that is both manufacturable and functional. Thanks, and Regards Team Schrainer Solutions
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Embedded Linux
    Microcontroller Programming
    Embedded Application
    Arduino
    ESP32
    C
    ARM Cortex-M
    Firmware
    Microcontroller Design
    ARM Microcontroller
    Drone
    Embedded Operating System
    Robotics
    C++
    Embedded System
  • $10 hourly

    • 0.0/5
    • (0 jobs)
    Im an embedded system developer and having expertise in writing Robust embedded system code with (bare metal)and without OS (threadx and freertos). I have extensive knowledge of OS Concepts like semaphores,scheduling, mutex, premption,deadlock. Worked with various ARM Architectures cortex m4 to cortex M7 based controllers including STM32F4 and TI chips. Programming IOT Devices (ESP32,ESP8266,TI CC3200) and Server Side Socket Creation and packet parsing. So with this skillset and knowledge i will deliver my clients quality and on time delivery with free maintaince os software.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Socket Programming
    AWS IoT Device Management
    AWS IoT Core
    ARM Cortex-M
    ARM Microcontroller
    Microcontroller
    STM32F4
    Wireless Communication
    Python
    C++
    Embedded System
    Embedded Linux
  • $20 hourly

    • 2.7/5
    • (4 jobs)
    Experienced Electrical & Electronics Engineer specializing in meticulous PCB and Circuit Design using Altium Designer and KiCad, delivering cutting-edge electronics solutions. Proficient in Schematic Capture, Microcontroller Programming (Embedded C, Arduino, ESP32), and adept at PLC Programming. Skilled in Electrical Engineering, Multilayer PCB design, and creating comprehensive circuit diagrams. My engineering journey is fueled by a deep passion for innovation and precision. I find joy in merging technology and creativity, constantly seeking ways to elevate electronics design standards. This profile not only reflects my commitment to excellence but also aims to attract like-minded individuals who share a fascination for pushing the boundaries of what's possible in the field. Thank you for taking the time to explore my profile. I look forward to connecting with fellow professionals, sharing ideas, and collaborating on exciting projects.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Multilayer PCB
    PLC Programming
    ESP32
    Arduino
    Microcontroller Programming
    Electronics
    Schematic Capture
    Circuit Design
    Printed Circuit Board
    Electrical Engineering
    KiCad
    PCB Design
    Firmware Programming
    Altium Designer
  • $10 hourly

    • 0.0/5
    • (0 jobs)
    "Embedded Systems Developer | Custom Solutions and Timely Delivery" Hello and welcome to my Upwork profile! I am thrilled to offer my extensive expertise in Embedded Systems to cater to your project needs. With 2 years of experience and a strong passion for delivering exceptional results, I am committed to providing high-quality and innovative embedded solutions. About Me: As a seasoned Embedded Systems specialist, I possess in-depth knowledge of microcontroller programming, IoT development, firmware design, etc. Whether you require a custom microcontroller-based project, IoT device development, or firmware optimization, I have the skills to fulfill your requirements. What Sets Me Apart: 1. **Customized Solutions:** Your project is unique, and I take the time to understand your specific goals to offer tailored solutions that precisely match your needs. 2. **Efficient Designs:** I prioritize optimization to ensure the embedded systems I develop are both functional and resource-efficient. 3. **Timely Delivery:** I value your time and strive to meet deadlines without compromising on quality. 4. **Effective Communication:** Clear and transparent communication is the foundation of a successful collaboration. I will keep you updated throughout the project and value your feedback. Services Offered: 1. **Microcontroller Programming:** Expert coding for various microcontrollers, ensuring smooth functionality and seamless integration. 2. **IoT Device Development:** Crafting innovative IoT solutions, connecting physical devices to the digital world, and enabling data-driven decision-making. 3. **Firmware Design and Optimization:** Creating reliable and efficient firmware solutions to enhance embedded system performance. How It Works: 1. **Project Discussion:** Upon initiating a contract, we will have a detailed discussion to understand your project requirements, constraints, and objectives. 2. **Design and Development:** Leveraging my expertise, I will commence the design and development phase, ensuring robust and scalable solutions. 3. **Testing and Revisions:** Rigorous testing will be conducted before delivery, ensuring the functionality and performance of the embedded systems. Any necessary revisions will be promptly addressed. Let's Get Started: I am enthusiastic about collaborating with you on your Embedded Systems project! Please feel free to reach out to discuss your ideas and how I can assist you in achieving your goals. Thank you for considering me as your preferred Embedded Systems specialist. Let's create exceptional embedded solutions together!
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Internet of Things Solutions Design
    Internet of Things Software
    Internet of Things
    Firmware Programming
    Tinkercad
    Circuit Design
    ESP32
    Arduino Firmware
    Embedded System
  • $30 hourly

    • 0.0/5
    • (0 jobs)
    I'm an Embedded System Engineer with 5+ years of hands-on experience and robust coding skills. My expertise ranges from hardware prototyping to Software Quality Assurance. Currently, I'm focused on refining Embedded and IoT tools like Sorcery Codebench, Sorcery Analyzer, Nucleus RTOS, and Mentor Embedded Linux. Proficient in C, C++, Python, Flask, and Django, I also handle PCB design and implement diagnostics routines for Automotive AUTOSAR and UDS. Let's collaborate on innovative projects that make a real impact.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Internet of Things
    Flask
    Automotive
    Printed Circuit Board
    Embedded System
    ESP32
    Arduino
    Raspberry Pi
    Python
    FreeRTOS
    Embedded Linux
    C++
    PCB Design
    Internet of Things Solutions Design
  • $12 hourly

    • 0.0/5
    • (0 jobs)
    I am a dedicated Computer Engineer with over 1.5 years of experience as a Junior Embedded Engineer in the industry. My expertise lies in the realms of Embedded Systems, Software Development, and Digital System Design. My background includes substantial work in R&D environments, reflecting a strong drive to explore new technologies and innovate.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    SQLite
    MySQL
    GSM
    Bluetooth LE
    MQTT
    Verilog
    MATLAB
    Firmware
    Flutter
    AWS IoT Core
    Linux
    C++
    C
  • $20 hourly

    • 0.0/5
    • (1 job)
    I am an Embedded Systems Architect with over 10 years of extensive experience in embedded software design and development. My expertise spans the entire lifecycle of firmware development, from requirements specification and architectural design to embedded software implementation, debugging, and troubleshooting. I excel in embedded software development, code reviews, integration, and verification testing, while also providing meticulous documentation and end-product maintenance. My proactive involvement extends to collaborating with cross-functional teams, ensuring seamless technical coordination between local and global stakeholders. • Embedded software design and development for various Embedded Boards (SBCs) including Raspberry PI, Arduino, Beaglebone Black, Particle Photon, ESP32, ESP8266, TS-4200 • Processors & Microcontrollers: NXP Kinetis K60/K66, Renesas M16C, M32C, R8C, Atmel 8051, PIC18 • Operating Systems: Embedded Linux, Ubuntu, Debian, Windows • Programming Languages: C, Python, Shell Scripting, SQL, PHP • Communication Protocols: Embedded Networking using lwIP TCP/IP stack, RS485, RS232, I2C, SPI, UART • Cybersecurity implementation for network communications • MISRA C Compliance for C Programming • Socket Programming • Software Tools: IAR, Eclipse, NetBeans, Microsoft Visual Studio, Sublime Text, Notepad++ • Web integration with Embedded Devices • Databases: MySql, PostgreSQL, SQLite • Version Control : Git, SVN, BitBucket, GitHub • Cloud Plateforms: Heroku • Microsoft Azure DevOps
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Web Development
    Mobile App
    PCB Design
    Product Design
    Embedded Application
    Software Development
    Bash Programming
    Automation
    Raspberry Pi Firmware
    Real-Time Operating System
    C
    Embedded Linux
    Embedded System
    Python
  • $15 hourly

    • 5.0/5
    • (2 jobs)
    I have hands on experience in logic designing using hardware description languages (Verilog/system verilog) . I have complete understanding of computer architecture with low level language (assembly) . I have done many projects on C/C++ , python and RISCV Assembly. If you are looking for a professional than please feel free to contact.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Digital Electronics
    FPGA
    Xilinx
    VLSI
    Register-Transfer Level
    Microchip
    C
    Assembly Language
    SystemVerilog
    Verilog
    C++
    Embedded System
  • $20 hourly

    • 4.0/5
    • (2 jobs)
    Hi, Asnan Farooq, I'm a Mechatronics & Control Engineer with 3 years of Automation and IoT industry expertise. I've experienced in more than 5+ Programming Language ( C, C++, Python, Java, PLC Ladder Programming, React Xcode with command-line tools, etc). Furthermore having good expertise on FPGA, PCB Designing, Electronics, Embedded Control Systems. I worked with many companies for my projects such as Textile, Ceramics, Feed Mills, Electrical Home appliances, Plastic Manufacturing, Glass manufacturing, Steel Utensils Manufacturing, etc). Served many clients with great satisfaction. Thanks
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Electrical Layout Design
    3D Modeling
    Internet of Things Solutions Design
    PLC & SCADA
    FPGA
    CAD & CAM Software
    Electrical Engineering
    Electronic Circuit Design
    Industrial Automation
    LabVIEW
    Robotics
    MATLAB
    C++
    Python
  • $15 hourly

    • 0.0/5
    • (1 job)
    As a fervent and resolute Computer Engineer, I am imbued with an unwavering commitment to the pursuit of knowledge. This steadfast dedication propels me to actively seek opportunities that facilitate the acquisition of profound expertise within the realms of Embedded Systems, IoT, and Mobile Application Development. My ultimate aspiration is to meticulously augment my skill set, thus meticulously preparing myself to embark upon a trajectory marked by distinction within these multifaceted disciplines. My aims transcend mere proficiency; they encompass the attainment of consummate mastery. This journey is characterized by a concerted investment of time, unswerving effort, and unwavering dedication. It is my sincere objective to make substantive contributions to pioneering ventures while perpetually metamorphosing and pushing the thresholds of personal accomplishment.
    vsuc_fltilesrefresh_TrophyIcon Embedded C
    Editing & Proofreading
    Academic Proofreading
    Creative Writing
    Circuit Design
    Java GUI
    Academic Writing
    SQL
    Java
    Microsoft SQL Server
    Firebase Realtime Database
    Python
    JavaScript
    WordPress
    Wix
    Mobile App Development
    React Native
    Arduino Firmware
    ESP8266
    ESP32
    MongoDB
    AWS IoT Core
    Embedded System
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

 
 
1. Post a job (it’s free)
 
Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.
 
 
2. Talent comes to you
 
Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.
 
 
3. Collaborate easily
 
Use Upwork to chat or video call, share files, and track project progress right from the app.
 
 
4. Payment simplified
 
Receive invoices and make payments through Upwork. Only pay for work you authorize.
 
 
 
Trusted by 5M+ businesses
 
 
 
 
 
 
How do I hire a Embedded C Programmers & Developer near Lahore,  on Upwork?
 
 
 
You can hire a Embedded C Programmers & Developer near Lahore,  on Upwork in four simple steps:
 
     
  • Create a job post tailored to your Embedded C Programmers & Developer project scope. We’ll walk you through the process step by step.
    •  
  • Browse top Embedded C Programmers & Developer talent on Upwork and invite them to your project.
    •  
  • Once the proposals start flowing in, create a shortlist of top Embedded C Programmers & Developer profiles and interview.
    •  
  • Hire the right Embedded C Programmers & Developer for your project from Upwork, the world’s largest work marketplace.
    •  
 
At Upwork, we believe talent staffing should be easy.
 
 
 
How much does it cost to hire a Embedded C Programmers & Developer?
 
Rates charged by Embedded C Programmers & Developers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.
 
 
 
Why hire a Embedded C Programmers & Developer near Lahore,  on Upwork?
 
As the world’s work marketplace, we connect highly-skilled freelance Embedded C Programmers & Developers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Embedded C Programmers & Developer team you need to succeed.
 
 
 
Can I hire a Embedded C Programmers & Developer near Lahore,  within 24 hours on Upwork?
 
Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Embedded C Programmers & Developer proposals within 24 hours of posting a job description.