Hire the best ETABS Specialists in Florida

Check out ETABS Specialists in Florida with the skills you need for your next job.
  • $60 hourly
    I have a masters degree in Structural Engineering with an experience of 7+ years in residential, commercial, light industrial buildings, academics, religious facilities and assisted facility living projects. Expertise in foundation design, two way slab design, structural analysis, concrete, steel, wood, masonry, light gauge and aluminum materials from single family to multi-story structures. Experience with the US building codes for concrete, steel, wood, masonry and aluminum. If you hire me, you can expect exceptional quality work with fast turn-around times and detail oriented drawings and/or calculations.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Structural Analysis & Design Software
    Commercial Design
    Construction Document Preparation
    Residential Design
    Wooden Structure
    Autodesk AutoCAD
    Structural Drawing
    Structural Engineering
    Structural Detailing
    Autodesk Revit
    Structural Analysis
    Reinforced Concrete Structures
    Drafting
    Steel Structure
  • $70 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 15 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Reinforced Concrete Structures
    Steel Structure
    Wooden Structure
    STAAD
    SAP2000
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    Architectural Drawing
    Structural Detailing
    Structural Analysis
    Structural Drawing
    Structural Engineering
    Civil Engineering
  • $70 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 17 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Building Information Modeling
    Wooden Structure
    Reinforced Concrete Structures
    Steel Structure
    STAAD
    SAP2000
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    Architectural Drawing
    Structural Analysis
    Structural Engineering
    Civil Engineering
    Architectural Design
  • $70 hourly
    Licensed Professional engineer with a Ph. D degree and over 15 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Commercial Design
    Residential Design
    SAP2000
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    AutoCAD HVAC Loads Calculations
    HVAC System Design
    MEP Design
    Architectural Drawing
    Structural Drawing
    Structural Analysis
    Structural Engineering
    Civil Engineering
  • $65 hourly
    I am an professional engineer who exceptionally values customer satisfaction. Most importantly, I promise best work ethic and attitude, active and excessive commitment, and integrity as a whole. I have mastered the multi-state building code, IBC 2018 and 2021. I process customer requests for building design and submit satisfactory design plans. When I complete a design, the PEs at our company review it and stamp it. By using ETABS, RISA, AutoCAD, ArchiCAD, Sketchup, Revit, Vectorworks, Vray, Rhino and 3DMax, I visualize the customer's idea to help realize the concept and add artistic value. I use 3DMax and Lumion to produce promotional videos for buildings, and lead the production level to the highest level with my excellent knowledge of digital design. Structural design and calculation are carried out to review whether it conforms to the US building code, and the PE's letter is sealed. Service: - Full Plan - Architectural Plan - Structural Plan - MEP Plan - Structural Calculation Report - Mechanical Calculation Report - Title 24 - Review and Stamp - 3D Rendering of The Building
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Structural Calculation Sheet
    CAD Drafting
    SketchUp
    Autodesk AutoCAD
    Civil Engineering
    Plumbing
    Building Design
    HVAC System Design
    Home Design
    Architectural Design
    MEP Design
    Mechanical, Electrical & Plumbing Systems
    Structural Engineering
    Residential Design
  • $70 hourly
    I have participated in the construction and reconstruction of numerous residential, commercial and industrial buildings in the concrete, wood, steel design fields and have achieved high customer satisfaction. I have successfully completed various projects related to building design, utilizing cutting-edge software and techniques to deliver outstanding results for my clients. With a passion for innovation, creativity, and a keen eye for detail, I am dedicated to providing top-notch services tailored to your specific needs. Also provide engineering STAMP (sign & seal) and We have engineering licensed in AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY. I am also a LEED Accredited Professional. I have proven experience in planning, design, structural analysis and calculations for all types of structural and civil engineering applications using various types of building materials. - Civil 3D Mastery: From site layouts, land development, transportation design to geotechnical & hydraulic analysis. - Infrastructure Design: Roadways, bridges, tunnels, and utilities. - Geotechnical Engineering: Soil analysis, foundation designs, and slope stability. - Environmental Engineering: Water treatment, waste management, and sustainable designs. - Structural Engineering: Analysis and design of structures, seismic designs, and load calculations. - Transportation Engineering: Traffic studies, transportation planning, and roadway designs. Software & Technology Proficiency: AutoCAD, Civil 3D, & Revit: Precision drafting, modeling, and design. BIM 360 & Navisworks: Collaborative project review and management. STAAD.Pro & ETABS: Advanced structural analysis and design. ArcGIS: Geographic Information Systems for spatial analysis. HydroCAD: Stormwater modeling and drainage design. HEC-RAS: Hydraulic simulations and flood studies. Safe & SAP2000: Structural analysis for diverse projects. MS Project: Efficient project management and tracking. Structural design and calculation are carried out to review whether it conforms to the US building code, and the PE's letter is sealed.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Structural Detailing
    Reinforced Concrete Structures
    Steel Structure
    Wooden Structure
    SAP2000
    Tekla Structures
    STAAD
    AutoCAD Civil 3D
    Autodesk Revit
    Autodesk AutoCAD
    Structural Drawing
    Structural Analysis
    Civil Engineering
    Structural Engineering
  • $60 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 15 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Architectural Drawing
    MEP Design
    Wooden Structure
    Reinforced Concrete Structures
    Steel Structure
    Autodesk Revit
    STAAD
    SAP2000
    Tekla Structures
    Autodesk AutoCAD
    Structural Analysis
    Structural Drawing
    Structural Engineering
    Civil Engineering
  • $50 hourly
    I am a Licensed Professional Engineer in California, Colorado, Idaho, Texas, Utah, Washington, and have over 14 Years of experience in the Civil/Structural engineering field. I am highly proficient at engineering, design, drafting, estimating, project management, litigation support, and forensic engineering. Typical projects include - Residential buildings, container homes, commercial buildings, industrial power plant, industrial refining plant structures, oil field structures, bridges, piers, and docks. I can provide you with a detailed Statement of Work, and written Agreements. My stamp is my guarantee and warranty.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    HVAC System Design
    MEP Design
    Structural Drawing
    CAD Drafting
    Autodesk AutoCAD
    Autodesk Revit
    CAD Conversion
    AutoCAD Civil 3D
    Civil Engineering
    Civil Law
    Structural Engineering
    Engineering & Architecture
  • $70 hourly
    NCEES Certified (EIT), with extensive experience in MEP and large-scale power systems design, analysis with over 18 years of excellent experience in handling MEP, Power System projects for Generation, Transmission and distribution. Having hand on experience in Front End Engineering Development and Detail Engineering Package for Transmission, Distribution Utilities and bulk power-consuming industries based on ITB, CDP & project specifications. ✅Offered Services: 1- Electrical Design and Drafting Services 2-PV Solar Plan Design 3-Fire alarm System Design 4-Lightning and Grounding System 5-MEP design and Drafting System 6-High Rise Commercial and Residential building 7-Project Management and Coordination 8- Communication system (PAGA, Telephone & CCTV) 9-BOQ (Bill of Quantity) & takeoff 10-Electrical panel, MCC Switchgear, & Switchboard 11-Procurement support, Quotation review, Specification/MR preparation etc. ✅Power System analysis using ETAP I will provide a complete and comprehensive report along with the conclusions and recommendations for various scenarios of power system operations for your projects. My offer includes the following: ◈ETAP .OTI files ◈Single line diagram for HV/MV/LV ◈AC, DC(Hybrid) Load flow analysis ◈Short circuit analysis using IEC or ANSI standards as per the client requirements. ◈Relay Coordination and Arc Flash Analysis ◈Transient Stability analysis ◈Harmonic (THD) analysis ◈DC Systems, and Battery Sizing Calculations ◈Grounding Calculations for Substations (IEEE-80/2013) ✅Lighting Calculation ◈Interior Lighting (Residential and Commercial) ◈Exterior Lighting / Outdoor Lighting ((Residential & Commercial) ◈Office Lighting ◈Plant Lighting ◈Process area, switch rack Lighting ◈Sports Arena Lighting ◈Roads, Streets & Pathways Lighting ◈Multi-Storied Building Lighting ◈Warehouses & Work Spaces Lighting I will provide you following documents and source files along with the project delivery ◈Exact Light Fittings and the location where you can buy in your country ◈Light Fitting (Fixture) Layout Plan ◈3D Rendering Images ◈Proper documentation with with DIALux Calculation report. ✅Software Skills ✦ AutoCAD ✦PowerWorld, DigSilent, ETAP ✦ Micro-Station ✦ MATLAB SIMULINK ✦SP3D ✦Navis Works ✦ Revit ✦EPLAN ✦CAD works ✦Navis Works ✦DIALux/DIALux Evo, Rulex, SketchUp I will provide you professional and high-quality work, customer satisfaction is my top priority. You are invited to place your order now or contact me to discuss the project for amazing
    vsuc_fltilesrefresh_TrophyIcon ETABS
    SAP2000
    Tekla Structures
    Autodesk Inventor
    SolidWorks
    ANSYS
    Autodesk Revit
    Autodesk AutoCAD
    AutoCAD HVAC Loads Calculations
    HVAC System Design
    MEP Design
    Electrical Engineering
    Electrical Drawing
    Mechanical Design
    Mechanical Engineering
  • $45 hourly
    UPWORK EXPERIENCE: 1. Structural Design of steel, reinforced-concrete, timber, LGS, aluminum in accordance with codes and standards(Steel frame, steel beam, steel column, trusses, lifting pad-eye, RC retaining wall, piles, foundation, RC beam, RC column, purlin, rafter, RC slab, concrete pavement, shipping container, wall bracket, anchor bolts, connection bolts, welding, traffic sign pole, pylon, lighting pole, warehouse frame modification and upgrade, light steel, tower crane foundation, timber shear wall, CMU shear wall, concrete pipe culvert, structural aluminum, slab on grade, temporary works structure, scaffolding, etc.) 2. 3D frame analysis with structural engineering software 3. Generate structural design calculation analysis report 4. Develop design calculation in MS Excel spreadsheet and Mathcad software 5. Technical writing in civil engineering topics and other related topics with Harvard style of referencing 6. Estimate quantities with MS Excel, PlanSwift and Bluebeam for building construction elements(steel, reinforced-concrete, CMU, rebar, excavation, pile, foundation, timber, roofing, light-weight steel, plumbing, ceiling, painting, paving, hardscape, road facilities, waterline, sewer line, exterior wall cladding) 7. Review and check design calculations and design specifications 8. Structural 2D drafting 9. Write terms of reference for project bid proposals 10. Plate analysis by Staadpro v8i 11. Cost estimate on Trenchless pipeline installation 12. Storm drainage design and calculation 13. Wind and seismic load calculation 14. Work breakdown structure(WBS) based on SOW 15. Airport flexible pavement 16. Seaport terminal piles estimation based on codes, geotechnical investigation and piles manufacturer's standards.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Finite Element Analysis
    Structural Detailing
    SAP2000
    Tekla Structures
    STAAD
    AutoCAD Civil 3D
    Autodesk Revit
    Autodesk AutoCAD
    Structural Drawing
    Structural Analysis
    Civil Engineering
    Structural Engineering
  • $70 hourly
    Experienced Structural Engineer educated in an extensive field of structures, heavy and light, in various structural materials. I'm well-versed in Structural Engineering, Earthquake Engineering, High Rise Structures, and Bridge Engineering. Skilled in most design analysis software such as ETABS, SAFE, SAP2000, CSIBridge, CSICols, TEKLA TEDDS, FORTE, IDEA StatiCa, etc. Ample experience in basic structural engineering and capable of providing highly detailed structural engineering designs, plans, and specifications. My basic skills are: • analyzing configurations of the basic structural components of a building or other structure; • calculating the pressures, stresses, and strains that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes; • considering the strength of various materials, e.g. timber, concrete, steel, and brick, to see how their inclusion may necessitate a change of structural design; • liaising with other designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction; • examining structures at risk of collapse and advising how to improve their structural integrity, such as recommending removal or repair of defective parts or rebuilding the entire structure; • making drawings, specifications and computer models of structures for building contractors; • working with geotechnical engineers to investigate ground conditions and analyze results of soil sample and in-situ tests; • liaising with construction contractors to ensure that newly erected buildings are structurally sound; • applying expert knowledge of the forces that act on various structures; • using CAD technology for simulation purposes.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Finite Element Analysis
    Structural Detailing
    SAP2000
    Tekla Structures
    STAAD
    Autodesk AutoCAD
    Autodesk Revit
    Structural Drawing
    Structural Analysis
    Structural Calculation Sheet
    Structural Engineering
  • $70 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 17 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    MEP Design
    Building Information Modeling
    Architectural Drawing
    SAP2000
    STAAD
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    Reinforced Concrete Structures
    Wooden Structure
    Steel Structure
    Structural Analysis
    Structural Engineering
    Civil Engineering
  • $50 hourly
    I have over 18 years of experience as a Structural Engineer designing steel, reinforced concrete, timber and FRP structures. I can provide AutoCAD drawing and calculations. I am PE Licensed and fully insured. See below for more info. - Solar Panel Support Structures - Load Bearing Wall Removal - Foundation Design (slab, pile, spread, grade beam) - Foundation Underpinning (helical pile, slot-cut) - Seismic and Wind Designs - Special Event Structures - Pre-engineered Metal Building - Retaining Walls - Code Compliancy and Addressing Reviewer Comments - Will assist throughout all phases of construction for revisions, change orders, RFI's, etc. - PE Licensed in CA, NY, NJ - Fully Insured
    vsuc_fltilesrefresh_TrophyIcon ETABS
    BIM Template
    Civil Engineering
    Wooden Structure
    Autodesk
    SketchUp
    Drafting
    MEP Design
    3D Modeling
    3D Rendering
    Architectural Design
    Structural Engineering
  • $35 hourly
    Licensed Professional Engineer , ( STRUCTURAL / CIVIL ) with 7+ years of experience working for an international environmental engineering company with concrete, wood, steel and frp design. Sofia is also a LEED Accredited Professional. Mr. Sofia specializes in all types of structural and civil-related engineering with multiple types of building materials in many areas of the world.. Sofia is adept at drainage plans, engineered house plans and the design of all types of structures. He is experienced with geotech reports, specification preparation, CAD/drawing production and structural calculations. Sofia has performed work on three continents and seven countries including the United States, Costa Rica, Panama, Peru, Japan, Jordan, and Trinidad & Tobago. Mr. Sofia STAMPED DRAWING in AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Title 24
    Quality Inspection
    Construction
    Drafting
    Environment
    Wastewater Management
    Reinforced Concrete Structures
    Steel Structure
    MEP Design
    Civil Engineering
    Structural Engineering
    Autodesk Revit
    Architectural Design
    Autodesk AutoCAD
  • $35 hourly
    Licensed Professional Engineer , ( STRUCTURAL / CIVIL ) with 7+ years of experience working for an international environmental engineering company with concrete, wood, steel and frp design. Marry is also a LEED Accredited Professional. Mr. Marry specializes in all types of structural and civil-related engineering with multiple types of building materials in many areas of the world.. Marry is adept at drainage plans, engineered house plans and the design of all types of structures. He is experienced with geotech reports, specification preparation, CAD/drawing production and structural calculations. Marry has performed work on three continents and seven countries including the United States, Costa Rica, Panama, Peru, Japan, Jordan, and Trinidad & Tobago. Mr. Marry STAMPED DRAWING in AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Title 24
    Quality Inspection
    Construction
    Drafting
    Environment
    Wastewater Management
    Reinforced Concrete Structures
    Steel Structure
    MEP Design
    Civil Engineering
    Structural Engineering
    Autodesk Revit
    Architectural Design
    Autodesk AutoCAD
  • $35 hourly
    Licensed Professional Engineer , ( STRUCTURAL / CIVIL ) with 7+ years of experience working for an international environmental engineering company with concrete, wood, steel and frp design. James is also a LEED Accredited Professional. Mr. James specializes in all types of structural and civil-related engineering with multiple types of building materials in many areas of the world.. James is adept at drainage plans, engineered house plans and the design of all types of structures. He is experienced with geotech reports, specification preparation, CAD/drawing production and structural calculations. James has performed work on three continents and seven countries including the United States, Costa Rica, Panama, Peru, Japan, Jordan, and Trinidad & Tobago. Mr. James STAMPED DRAWING in AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Title 24
    Quality Inspection
    Construction
    Drafting
    Environment
    Wastewater Management
    Reinforced Concrete Structures
    Steel Structure
    MEP Design
    Civil Engineering
    Structural Engineering
    Autodesk Revit
    Architectural Design
    Autodesk AutoCAD
  • $65 hourly
    UPWORK EXPERIENCE: 1. Structural Design of steel, reinforced-concrete, timber, LGS, aluminum in accordance with codes and standards(Steel frame, steel beam, steel column, trusses, lifting pad-eye, RC retaining wall, piles, foundation, RC beam, RC column, purlin, rafter, RC slab, concrete pavement, shipping container, wall bracket, anchor bolts, connection bolts, welding, traffic sign pole, pylon, lighting pole, warehouse frame modification and upgrade, light steel, tower crane foundation, timber shear wall, CMU shear wall, concrete pipe culvert, structural aluminum, slab on grade, temporary works structure, scaffolding, etc.) 2. 3D frame analysis with structural engineering software 3. Generate structural design calculation analysis report 4. Develop design calculation in MS Excel spreadsheet and Mathcad software 5. Technical writing in civil engineering topics and other related topics with Harvard style of referencing 6. Estimate quantities with MS Excel, PlanSwift and Bluebeam for building construction elements(steel, reinforced-concrete, CMU, rebar, excavation, pile, foundation, timber, roofing, light-weight steel, plumbing, ceiling, painting, paving, hardscape, road facilities, waterline, sewer line, exterior wall cladding) 7. Review and check design calculations and design specifications 8. Structural 2D drafting 9. Write terms of reference for project bid proposals 10. Plate analysis by Staadpro v8i 11. Cost estimate on Trenchless pipeline installation 12. Storm drainage design and calculation 13. Wind and seismic load calculation 14. Work breakdown structure(WBS) based on SOW 15. Airport flexible pavement 16. Seaport terminal piles estimation based on codes, geotechnical investigation and piles manufacturer's standards.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Finite Element Analysis
    Tekla Structures
    SAP2000
    STAAD
    AutoCAD Civil 3D
    Autodesk Revit
    Autodesk AutoCAD
    Structural Calculation Sheet
    Structural Engineering
    Structural Detailing
    Structural Analysis
    Structural Drawing
    Civil Engineering
  • $65 hourly
    💥 Chartered Structural Engineer with a profound foundation in Civil Engineering, I've solidified my niche in Structural Engineering, honing my expertise across diverse construction terrains and global industries. 🟢 Versatility with International Building Codes & Standards: ASCE, AISC, ACI, IBC, BS, NDS, AS/NZ, Eurocodes, NSR-10, and more, providing a universal approach to structural considerations. 🟢 Holistic Structural Design & Analysis Expertise: ✔ High-rise Residential & Commercial complexes ✔ Advanced Industrial units ✔ Power plants (both renewable & nuclear energy) ✔ Infrastructure engineering (bridges, culverts, tunnels, and retaining structures) ✔ Rigging & heavy machinery frameworks ✔ Seismic & wind-resistant structures ✔ Iconic standalone structures ✔ Innovative anchoring solutions ✔ Deep and shallow foundations 🟢 Proficiency in Varied Construction Materials: ✔ Prestressed and post-tensioned concrete ✔ Reinforced concrete techniques ✔ Hot and cold steel designs ✔ Cutting-edge composite structures ✔ Lightweight aluminum frames ✔ Sustainable timber designs ✔ Structural glazing systems ✔ Advanced FRP (fiberglass-reinforced polymer) applications 🟢 State-of-the-art Software Mastery: Structural Analysis & Design: ‣ ROBOT ‣ ANSYS ‣ SAP2000 ‣ ETABS ‣ SAFE ‣ RFEM ‣ IDEA STATICA ‣ RAM ELEMENTS ‣ RAM CONNECTIONS ‣ BRIDGE DESIGNER ‣ CSI BRIDGE Project Oversight & Coordination: ‣ BLUEBEAM ‣ CYPECAD ‣ NAVISWORKS BIM Integration & Detailing: ‣ REVIT ‣ TEKLA STRUCTURES ‣ ADVANCE STEEL ‣ AUTOCAD 2D/3D Supplementary Tools: ‣ AUTOCAD CIVIL 3D ‣ COMSOL MULTIPHYSICS ‣ ROCSCIENCE software suite Global Flexibility: I adapt to diverse time zones, ensuring seamless collaboration regardless of geographical boundaries.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Structural Calculation Sheet
    Structural Drawing
    Structural Dynamics
    Structural Analysis
    Structural Engineering
    Earthquake Engineering
    Finite Element Analysis
    Building Information Modeling
    Structural Detailing
    Autodesk Revit
    STAAD
    Autodesk AutoCAD
    SAP2000
    Tekla Structures
  • $70 hourly
    Experienced Structural Engineer educated in an extensive field of structures, heavy and light, in various structural materials. I'm well-versed in Structural Engineering, Earthquake Engineering, High Rise Structures, and Bridge Engineering. Skilled in most design analysis software such as ETABS, SAFE, SAP2000, CSIBridge, CSICols, TEKLA TEDDS, FORTE, IDEA StatiCa, etc. Ample experience in basic structural engineering and capable of providing highly detailed structural engineering designs, plans, and specifications. My basic skills are: • analyzing configurations of the basic structural components of a building or other structure; • calculating the pressures, stresses, and strains that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes; • considering the strength of various materials, e.g. timber, concrete, steel, and brick, to see how their inclusion may necessitate a change of structural design; • liaising with other designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction; • examining structures at risk of collapse and advising how to improve their structural integrity, such as recommending removal or repair of defective parts or rebuilding the entire structure; • making drawings, specifications and computer models of structures for building contractors; • working with geotechnical engineers to investigate ground conditions and analyze results of soil sample and in-situ tests; • liaising with construction contractors to ensure that newly erected buildings are structurally sound; • applying expert knowledge of the forces that act on various structures; • using CAD technology for simulation purposes.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Finite Element Analysis
    Structural Detailing
    SAP2000
    Tekla Structures
    STAAD
    AutoCAD Civil 3D
    Autodesk Revit
    Autodesk AutoCAD
    Structural Drawing
    Structural Analysis
    Civil Engineering
    Structural Engineering
  • $50 hourly
    With a comprehensive background in architectural, structural, and MEP (Mechanical, Electrical, Plumbing) design, I bring a holistic approach to building projects, ensuring seamless integration of all elements for optimal functionality and aesthetic appeal. As an architect, I excel in translating client visions into tangible designs that prioritize both form and function, creating spaces that inspire and enhance human experience. In the realm of structural design, I leverage my expertise to engineer robust and efficient building systems that withstand the forces of nature while maximizing usable space and minimizing material usage. From concrete and steel to innovative materials, I employ a strategic approach to structural design, prioritizing safety, sustainability, and cost-effectiveness. In MEP design, I specialize in creating energy-efficient and environmentally sustainable building systems that optimize comfort, safety, and operational efficiency. Whether it's designing HVAC systems for optimal climate control, implementing cutting-edge lighting solutions for ambiance and functionality, or engineering plumbing systems for reliable water distribution, I ensure that every aspect of the MEP design integrates seamlessly with the architectural and structural components of the building. My multidisciplinary expertise allows me to oversee the entire design process from concept to construction, facilitating effective communication and collaboration among all stakeholders. With a keen eye for detail and a commitment to excellence, I strive to deliver innovative and sustainable building solutions that exceed client expectations and positively impact the built environment.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    3D Design
    2D Design & Drawings
    Autodesk AutoCAD
    Autodesk Revit
    SketchUp
    MEP Design
    HVAC System Design
    Mechanical, Electrical & Plumbing Systems
    SAP2000
    Tekla Structures
    Structural Engineering
    Engineering & Architecture
  • $70 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 17 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Building Information Modeling
    Architectural Drawing
    MEP Design
    Autodesk Revit
    Autodesk AutoCAD
    Reinforced Concrete Structures
    Wooden Structure
    Steel Structure
    STAAD
    SAP2000
    Tekla Structures
    Structural Analysis
    Structural Engineering
    Civil Engineering
  • $70 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 17 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Architectural Drawing
    Seismic
    STAAD
    SAP2000
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    Reinforced Concrete Structures
    Wooden Structure
    Steel Structure
    Structural Analysis
    Structural Drawing
    Structural Engineering
    Civil Engineering
  • $80 hourly
    States licensed: Colorado, Delaware, Florida, Georgia, Idaho, Indiana, Kansas, Kentucky, Michigan, Minnesota, Missouri, Nevada, New Mexico, New Jersey, New York, North Carolina, Ohio, Oregon, Pennsylvania, South Dakota, Texas, Utah, Washington, Wisconsin, Wyoming, and Washington DC. Tasks and Duties Structural Engineering & Design: a. Proficient in Processing Calculations. b. Proficient in Analyzing and Designing of Various Structural Systems, Including Structural Steel and Aluminum. i. This Includes, but is Not Limited to Structures Located in Seismic Zones and Hurricane Prone Regions. c. Proficient in Designing Reinforced, Unreinforced, and Pre-Stressed Concrete. d. Proficient in Designing Load Bearing and Non-Load Bearing Masonry. e. Proficient in Conducting Analysis and Design for Deep and Shallow Foundation Systems. f. Proficient in Reviewing and Evaluating Shop Drawings. g. Maintaining with latest engineering design codes including IBC, ASCE 7, AISC, ACI, ADM, NDS, and AWS codes Client Service Skills: a. Correspond and Assist With the Client Regarding Project Requirements and Progress. b. Proficient in Preparing Proposals. i. Including Calculating and Determining Scope, Budget, Hours Required for Projects, Developing Sections and Details According to the Client’s Scope. c. Proficient in Coordinating and Participating in Structural Inspections, Evaluations, Overseeing Construction, Responding and Clarifying to Construction Related Questions. BIM Duties: a. Develop BIM model for projects which links to structural models. b. Migrate existing structural designs to BIM models. c. Tasked with supervising the design team to utilize BIM modeling. Leadership Skills: a. Lead and Assist Assistant Engineers, Intern Engineers and Fellow Associate Engineers on Projects. b. Coordinate and Collaborate with Other Disciplines on Project Needs and Requirements.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Architectural Drawing
    Seismic
    STAAD
    SAP2000
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    Wooden Structure
    Reinforced Concrete Structures
    Steel Structure
    Structural Analysis
    Structural Drawing
    Structural Engineering
    Civil Engineering
  • $60 hourly
    I am a Structural and Civil Engineer licensed in California, Washington & Nevada. I have many years of residential, commercial & industrial structural design experience. I have prepared countless sets of drawings using AutoCAD.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Floor Plan
    Site Plan
    Steel Structure
    Structural Drawing
    Cost Estimate
    SAP2000
    Drafting
    Licensing Agreement
    Autodesk Revit
    Civil Engineering
    Civil Law
    Licensing
    Structural Engineering
  • $80 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 18 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design 17. MEP & HVAC system design & load calculation.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    MEP Design
    Architectural Drawing
    Reinforced Concrete Structures
    Wooden Structure
    Steel Structure
    Autodesk Revit
    Autodesk AutoCAD
    STAAD
    SAP2000
    Tekla Structures
    Structural Analysis
    Structural Detailing
    Structural Engineering
    Civil Engineering
  • $60 hourly
    As the team manager of a specialized Architect & Structural Designers team, we offer comprehensive expertise in architectural, structural, and MEP design. With licensed engineers in the USA, Canada, Australia, and the UK, we provide PE STAMP certification across AL, AR, AZ, CA, and more. Communication is key in our field, and we prioritize clear communication and detailed scheduling. Quality is paramount from the outset, as evidenced by our solid reviews. We excel in meeting tight deadlines, delivering top-notch work whether independently or collaboratively. Our services are personalized, emphasizing optimal communication, quality, and efficiency. We go beyond mere design, prioritizing customer comfort and satisfaction in every project. Our mission is to not just meet but exceed our clients' expectations.
    vsuc_fltilesrefresh_TrophyIcon ETABS
    Reinforced Concrete Structures
    Wooden Structure
    Drafting
    SAP2000
    Material Take-Off
    Land Surveying
    Commercial Design
    Building Design
    Landscape Design
    Floor Plan
    Site Plan
    Civil Law
    Civil Engineering
    Structural Engineering
  • $50 hourly
    Licensed Civil & Structural engineer with a Ph. D degree and over 17 years of experience. Mastered the most of all states building code. Particular Expertise in: 1. Structural analysis and design (Residential, Commercial, Industrial, Bridges) 2. Evaluation of existing structures 3. Forensic Engineer. Report Review. Opinions validation. 4. Repair & Strengthening of Structural Systems 5. Design of Roof-Mounted Solar Photovoltaic (PV) Systems 6. Design of Fall Arrest Systems per OSHA requirements 7. Engineering assistance in Permitting Process (Review and PE Stamp) 8. Provide a second opinion review of third-party structural plans and reports. 9. Value engineering design optimization for cost saving 10. US Building Codes compliance analysis (IBC, ACI, AISC, NDS, TMS) 11. US Bridge Code (AASHTO) 12. Wind load calculations 13. Snow load calculations 14. Seismic load calculations 15. Flood resistant design 16. Earth retaining structures and foundation design
    vsuc_fltilesrefresh_TrophyIcon ETABS
    MEP Design
    Architectural Drawing
    STAAD
    SAP2000
    Tekla Structures
    Autodesk Revit
    Autodesk AutoCAD
    Reinforced Concrete Structures
    Wooden Structure
    Steel Structure
    Structural Detailing
    Structural Analysis
    Structural Engineering
    Civil Engineering
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by 5M+ businesses