Upwork home
Sign up
Secondary

Hire the best Field-Programmable Gate Array (FPGA) Specialists in Islamabad, PK

Check out Field-Programmable Gate Array (FPGA) Specialists in Islamabad, PK with the skills you need for your next job.
Hire freelancers
  • $35 hourly
    • 5.0/5
    • (9 jobs)
    As an experienced Avionics/Electronics Engineer, I bring a diverse skill set and 4+ years of expertise in electronics and circuit verification, hardware implementation using Verilog, Digital Signal Processing. My proficiency extends to LabVIEW, MATLAB, VIVADO, and various other engineering tools, with a particular focus on FPGA programming. I have honed my skills in working with Software Defined Radios and Direct RF generation using Xilinx (RFSOCs, Zynq paired with AD9361) and NI hardware (FlexRIO, CRIO, USRP, myRIO). Over the past three years, I have developed my capabilities as a LabVIEW/MATLAB developer, working with High Speed Data acquisition, and implementing Digital Signal Processing (DSP) chains and algorithms. In addition to my technical skills, I am committed to ensuring timely delivery of projects and maintaining open and clear communication with clients throughout the project tenure. My goal is to provide innovative solutions that meet the needs of my clients and contribute to the advancement of the industry. I am always open to new challenges and learning opportunities. I look forward to bringing my unique blend of skills and passion to your project. Please feel free to contact me to discuss how we can collaborate on your next project.
    Featured Skill Field-Programmable Gate Array (FPGA)
    FPGA
    Digital Electronics
    Embedded System
    MATLAB
    C++
    NI Multisim
    Xilinx
    Digital Signal Processing
    Verilog
    Photography
    Media Relations
    LabVIEW
    Analog Electronics
  • $35 hourly
    • 4.9/5
    • (72 jobs)
    Experienced engineer specializing in electronics and product design, with a keen focus on intricate printed circuit board designs, prioritizing manufacturability. My expertise spans the entire product development cycle — from conceptualization to prototyping, utilizing in-house tools for design, construction, programming, and rigorous testing. I possess a diverse portfolio, having contributed to various industries. This ranges from formulating initial concepts and building prototype devices, to orchestrating the seamless transition to large-scale production manufacturing. More detail about Embedded platforms of my design experience: Primary Offerings: - Hardware Design and printed circuit board (PCB) layout with Altium Designer - MCAD collaboration for product design - Build and test prototypes(in-house assembly capability and testing equipment) - Help and management in product manufacturing - Troubleshoot and fix incomplete or failed designs - Bare-metal and RTOS based firmware development I have crafted an extensive array of circuit boards, encompassing: - Standard 2 and 4-layer boards with surface mount and through-hole components - HDI boards upto 14-layers - Highspeed boards with controlled impedance and length matching - Flex and rigid-flex boards for complex mechanical shapes - Products having Bluetooth, BLE, WiFi, serial interfaces(SPI, I2C, RS-232, RS-485, CAN) and highspeed interfaces(USB2.0, USB3.0, PCIe, SATA, MIPI CSI-DSI, Ethernet). Whether it entails transforming an existing Arduino/Raspberry Pi prototype into a marketable product or crafting an entirely new offering from its inception, I take pleasure in delivering tailor-made technical solutions that precisely align with your requirements. Have any product idea, contact me through Upwrok to discuss!
    Featured Skill Field-Programmable Gate Array (FPGA)
    Electrical Engineering
    FPGA
    Bluetooth LE
    nRF52832
    ESP32
    STM32
    Internet of Things Solutions Design
    Industrial Internet of Things
    Multilayer PCB
    Hardware Design
    Embedded System
    Altium Designer
    PCB Design
    Hardware Prototyping
  • $40 hourly
    • 4.9/5
    • (31 jobs)
    Solution Architect System Design based on System on chip reconfigurable platforms - development of high speed Embedded and FPGA based systems, handling the whole hardware and software aspect of it. Had my hands dirty with, - ZYNQ UltraScale ZCU111 RFSOC / ZCU102/ ALYNX - Zynq ZedBoard/MicroZed/Zybo/PYNQ/ custom designed zynq boards - ADI RFSOCs/FMCOMMS/USRPs/LimeSDR/iotSDR/pocketGNSS piksi GNSS/GPS and custom SDRs - Analog Devices High Speed ADC/DACs, DDS chips, RF Boards. - ASIC Emulation on S2C VU19 Board, 100G ethernet NIC System Verilog/VHDL/Xilinx SOC Dev Tools/Vivado Suite/Vivado HLS/Xilinx SDK, Xilinx System Generator. Matlab/GnuRadio/UHD/SoapySDR/adi libiio/iioscope/ Embedded Linux/Yocto/PetaLinux/ microblaze/ C, Python , ARM Processors, Rasberry PI/BeagleBoan/Nvidia Jetson SDR and comm RF Testing expertise on Agilent Vector Signal Analyzer, Rohde & Shawardz FSVR, Infiniium Oscilloscope, National Instuments AWG and VSA.
    Featured Skill Field-Programmable Gate Array (FPGA)
    MATLAB
    Verilog
    Xilinx
    FPGA
    Python
    Embedded Linux
    C
  • $32 hourly
    • 5.0/5
    • (19 jobs)
    Hello, thank you for checking out my profile. I'm a Certified LabVIEW and MATLAB Developer with over 5 years of experience in signal processing, FPGA, and Embedded System Design. With a strong set of skills and expertise, I bring proficiency in developing cutting-edge solutions in these domains. My strengths lie in my deep understanding of LabVIEW and MATLAB, allowing me to design and implement efficient algorithms for signal processing tasks. I excel in FPGA programming, leveraging its power to accelerate computations and optimize system performance. Additionally, my expertise extends to embedded systems design, where I have successfully developed robust solutions for various applications. Throughout my career, I have been involved in several notable projects such as Signal Processing of mm-wave Radar for Driver Drowsiness and Child Presence Detection for Vehicle In-Cabin Monitoring System which showcase my ability to deliver high-quality results. I have successfully implemented complex signal processing algorithms, enabling real-time data analysis for critical applications. Furthermore, my experience in FPGA design has led to significant improvements in system speed and efficiency. I hold a strong educational background, having obtained relevant certifications and a degree in Electrical Engineering. This foundation has equipped me with a solid theoretical understanding, which I consistently apply to real-world challenges. In summary, as a Certified LabVIEW and MATLAB Developer, I possess a wealth of experience in signal processing, FPGA, and embedded system design. My proven track record of delivering successful projects, along with my expertise and educational background, make me a valuable asset in tackling complex engineering problems. .
    Featured Skill Field-Programmable Gate Array (FPGA)
    VHDL
    RF Design
    Embedded System
    Verilog
    Embedded C
    Firmware Programming
    Python
    Digital Signal Processing
    FPGA
    Circuit Design
    LabVIEW
    Algorithm Development
    C++
    Mathematics
    MATLAB
  • $25 hourly
    • 5.0/5
    • (5 jobs)
    With over 3 years of professional experience, I specialize in LabVIEW, MATLAB, and FPGA development, with a diverse portfolio spanning aviation product design to PCB prototyping. My expertise lies in LabVIEW FPGA, LabVIEW Realtime, MATLAB, Simulink, Xilinx Vivado, and Altium Designer for PCB designing, complemented by proficiency in Mission Planner. I have a proven track record in utilizing various instrumentation tools, including communication and RF equipment, SDR/USRP, oscilloscopes, spectrum analyzers, and network analyzers. Throughout my career, I have extensively worked with hardware components such as USRPs from National Instruments, MPSoC/RFSoC from Xilinx/AMD, and solutions from Analog Devices and Avnet providers
    Featured Skill Field-Programmable Gate Array (FPGA)
    GUI Design
    UI Graphics
    UI/UX Prototyping
    Serial Port Interfacing
    Desktop Application
    Simulink
    Avionics
    Test Automation
    LabVIEW
    Arduino
    FPGA
    MATLAB
  • $50 hourly
    • 4.9/5
    • (14 jobs)
    I can work on different languages such as VHDL, Verilog HDL, SystemVerilog. I can work on MULTISIM software. Quartus Xilinx Vivado Logisim Can be done easily
    Featured Skill Field-Programmable Gate Array (FPGA)
    Integrated Circuit
    VHDL
    Electronic Circuit Design
    Amplifiers & Filters
    Web Design
    Verilog
    SystemVerilog
    Embedded System
    Circuit Design
    Schematic
    Xilinx
    Electrical Engineering
    NI Multisim
    MATLAB
    FPGA
  • $40 hourly
    • 4.9/5
    • (17 jobs)
    🏆 A dedicated professional with comprehensive expertise in Machine Learning, Computer Vision, Deep Learning, and Generative AI. I bring extensive experience in deploying advanced AI models and optimizing solutions for both desktop and embedded environments. My background includes certifications in Data Science, Deep Learning, and Machine Learning in Production, complemented by hands-on project experience. 🏆 🏆🏆 𝙀𝙓𝙋𝙀𝙍𝙏 𝙄𝙉 🏆🏆 🚀 𝐂𝐨𝐦𝐩𝐮𝐭𝐞𝐫 𝐕𝐢𝐬𝐢𝐨𝐧 🚀 ✅ Computer Vision Tasks: Skilled in Image Classification, Image Segmentation, and Object Detection. ✅ Deep Learning Frameworks: Proficient with TensorFlow, Keras, and PyTorch for developing sophisticated neural network models. ✅ Advanced Architectures: Experience in implementing Vision Transformers, Swin Transformers, and DETR. ✅ Image Processing: Expertise in numpy, OpenCV, matplotlib, and Pillow for preprocessing and manipulation. ✅ Annotation Tools: Familiar with LabelKit, Labelbox, labelme, and Colabeler for data labeling and annotation. ✅ Embedded Computer Vision: Proficient in deploying models on resource-constrained environments using TensorFlow Lite and other techniques. ✅ Explainable AI: Utilizes LIME and Grad-CAM for model interpretability. 🚀 𝐌𝐚𝐜𝐡𝐢𝐧𝐞 𝐋𝐞𝐚𝐫𝐧𝐢𝐧𝐠 🚀 ⭐ Supervised Learning: Implementing models such as Logistic Regression, SVMs, Decision Trees, and Neural Networks. ⭐ Unsupervised Learning: Expertise in clustering methods like K-means, DBSCAN, Birch, and Hierarchical clustering. ⭐ Semi-Supervised Learning: Leveraging both labeled and unlabeled data for improved model accuracy. ⭐ Classification and Regression: Building and tuning models for various prediction tasks including Linear, Polynomial, Ridge, and Lasso Regression. ⭐ Ensemble Methods: Enhancing model performance with Random Forests, Bagging, and Boosting techniques. ⭐ Feature Engineering: Advanced techniques for feature selection and dimensionality reduction. 🚀 𝐃𝐚𝐭𝐚 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 🚀 📈 Statistical Analysis: Applying advanced statistical methods for deriving insights from complex datasets. 📈 Data Interpretation: Translating analytical findings into actionable business strategies. 📈 Trend Analysis: Identifying patterns and forecasting future trends. 📈 Predictive Modeling: Utilizing predictive models for risk assessment and decision-making. 📈 Multivariate Analysis: Handling and analyzing multi-dimensional data. 🚀 𝐆𝐞𝐧𝐞𝐫𝐚𝐭𝐢𝐯𝐞 𝐀𝐈 🚀 📜 Generative Adversarial Networks (GANs): Experience with StyleGAN, StyleGAN2, StackGAN, CycleGAN, SRGAN, and DCGAN. 📜 Generative AI Tools: Proficient with Ollama, LangChain, Llama3.1, RAG, Gemini, and GPT. 🚀 𝐄𝗺𝗯𝗲𝗱𝗱𝗲𝗱 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 🚀 📦 Embedded Devices Experience: Expertise with Arduino, STM32, ESP32, FPGA, Raspberry Pi, and Nvidia Jetson. 📦 Deployment Projects: Successfully deployed various AI models on edge devices, including Jetson Orin Nano and Jetson Tx2, for tasks like ANPR, emotion detection, gesture recognition, and more. 🏆🏆𝗧𝗢𝗢𝗟𝗦 𝗔𝗡𝗗 𝗧𝗘𝗖𝗛𝗡𝗜𝗖𝗔𝗟 𝗦𝗞𝗜𝗟𝗟𝗦🏆🏆 🔍 Core Tools: Pandas, Numpy, Scikit-Learn, TensorFlow, Keras, PyTorch, XGBoost, LightGBM, CatBoost 🔍 Visualization: Matplotlib, Seaborn, Plotly, ggplot2 🔍 Data Processing: Dask, Apache Spark 🔍 Deep Learning: TensorFlow, Keras, PyTorch, Caffe, Theano 🔍 Natural Language Processing: NLTK, SpaCy, Gensim, BERT 🔍 Generative AI: GANs (StyleGAN, StyleGAN2, StackGAN, CycleGAN, SRGAN, DCGAN), Ollama, LangChain, Llama3.1, RAG, Gemini, GPT 🔍 Transformers: Vision Transformers, Swin Transformers, DETR 🔍 Statistical Modeling: Statsmodels, SciPy 🔍 Computer Vision: OpenCV, PIL (Python Imaging Library), skimage 🔍 Development Tools: Jupyter, Docker, Git, SVN 🔍 Embedded Devices: Arduino, STM32, ESP32, FPGA, Raspberry Pi, Nvidia Jetson 📞 𝗟𝗲𝘁 𝘂𝘀 𝗖𝗼𝗻𝗻𝗲𝗰𝘁: 💼 I am passionate about bringing innovative AI solutions to life and optimizing them for various platforms. Contact me to explore how we can collaborate on your next project and achieve outstanding results together!
    Featured Skill Field-Programmable Gate Array (FPGA)
    Machine Learning
    Generative AI
    Data Science
    Electrical Engineering
    MATLAB
    Computer Vision
    FPGA
    FreeRTOS
    Embedded Operating System
    Microprocessor
    Deep Learning
    Keras
    Artificial Intelligence
    C++
    Python
  • $40 hourly
    • 5.0/5
    • (22 jobs)
    As a solution architect I have 14+ years of ASIC/FPGA/SOC based Design/Develop/Deployment experience from user requirement to the end system. -- Digital Design of complex blocks, RTL design, systemVerilog/IPcore Design -- FPGA emulation of large ASIC designs on Dense Xilinx FPGA chips -- Xilinx SOC based digital designs using Vivado design suit. -- High speed ethernet/PCIe Designs ADC/DAC Software definer radios DSP cores -- Embedded Linux - devicetree - driver - usersapce apps -- Timing closures - CDC based designs -- High speed ADC/DACs from ADI designs -- Verification using systemVerilog and cocoTB Tools: -- Xilinx FPGA Vivado Design Suite, Debugging using ILA Xilinx ZYNQ SOC / Ethernet / DMA / cores. -- IPs from Cadence, precise-ITC, and ARM, as well as VIPs from Mentor Graphics, Synopsys, and TrueChip. With a high level of skill, responsibility and dedication to solution delivery, I always realize every requirement of the client to the maximum in detail, and guarantees the timeline of the project with excellent time management skills.
    Featured Skill Field-Programmable Gate Array (FPGA)
    VHDL
    Digital Design
    SystemVerilog
    Semiconductor
    Register-Transfer Level
    Embedded Linux
    FPGA
  • $35 hourly
    • 5.0/5
    • (2 jobs)
    Experienced Integrated Circuit Design, specializing as an IC Designer. With experience in 6 IC tape-outs and multiple designs utilizing technologies such as 28nm, 45nm, 65 nm, 110 nm, and 180 nm, my expertise lies in designing and simulating Analog ICs (Schematic to GDSII), Digital ICs (RTL to GDSII), and Mixed-signal integrated circuits (SoC). Proficient in tools like Cadence Virtuoso, Mentor Graphics Calibre, Cadence Genus, Encounter/Innovus, DC compiler, VCS, Xilinx, Vivado, Modelsim, Matlab, and OpenSource ASIC design tools like "Openlane." Eagerly awaiting your response. Thank you.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Design Validation
    Noise Simulation
    Schematic
    Layout Design
    Verilog
    Cadence Platform
    Analog Electronics
    Internal Communications
    Analog Circuit
    Integrated Circuit
    Design Simulation
    FPGA
    Microchip
  • $120 hourly
    • 5.0/5
    • (30 jobs)
    I have experience of over seven years in the real-time embedded electronics. Now, I am an Embedded Systems engineer for a small corporation that specializes in medical systems. I have ported operating systems, written boot loaders and many device drivers in my research career. As an co-design engineer, I need to know both the hardware and the software to estimate work within the constraints for the system (CPU speed, RAM, flash storage, power etc.) to meet the overall device specifications. I specialize in reading data sheets to determine how to set the write bits in the right registers to achieve what needs to be done. My key expertise include the following • Strong programming skills in C/C++ for embedded platforms • Understanding of processor architecture, ARM, x86, RISC-V • Hands on experience of building Linux kernel, drivers and BSP’s • Know-how of boot-loaders, board bring-ups • Know-how of debugging kernel modules, drivers etc. • Hands-on experience of profiling tools such as strace, ftrace etc. • Have solid hands-on experience with RTOS such as Nucleus, ThreadX, FreeRTOS etc • Have hands-on experience in hardware sensor interfacing • Have good understanding of Networking & Wireless protocols such as TCP/IP • Familiar with PCI drivers • Have working experience of Git usage • Unit/module testing associated to the development
    Featured Skill Field-Programmable Gate Array (FPGA)
    Internet of Things
    Xilinx
    FPGA
    Simulink
    MATLAB
    PCB Design
    Arduino
    Digital Electronics
    Circuit Design
    C++
    Analog Electronics
    Embedded C
    Embedded Linux
    Verilog
    Multilayer PCB
  • $25 hourly
    • 4.6/5
    • (17 jobs)
    Experience Industrial Embedded Software and Hardware Engineer. I worked a lot on projects at the industry level in my three years of experience. Recently on the way to pursuing full-time freelancing at Upwork Core Application I worked on: -IOT -Bluetooth, Xbee, Lora, SIgfox, Wifi, GSM, and other RF modules. -FPGA -Inverter/ Converters/ VMS/ TA. - STM/ Atmega/PIC18F Software Hardware. -Power Supplies - USB drivers and PCB boards. -ESP32 - Raspberry pi Embedded Firmware: -Bare Metal Embedded Firmware Development. -Arduino/ STM/ ESP/ PIC and Various MCU Firmware. -Python, AI with Embedded Hardware. -PYQT, GUI for Embedded prototyping. Services: -PCB Design and Layout. -Firmware Development. -GUI for Embedded products. -Cost-effective boards consultation and design -Mass production management -Enclosure design for Custom boards Best Regards, Ahad.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Verilog
    Electronic Circuit Design
    STM32
    LoRa
    SystemVerilog
    Internet of Things
    Microcontroller Programming
    Computer Hardware Design
    Altium Designer
    FPGA
    Raspberry Pi Firmware
    Internet of Things Solutions Design
    PCB Design
    Embedded System
    Firmware Programming
    Embedded C
    Digital Design
  • $20 hourly
    • 5.0/5
    • (7 jobs)
    I am an expert in System Verilog, Verilog and VHDL and 5+ experience with FPGAs. Some of the highlights if my experience are: Development of RADAR Data Acquisition Firmware: I developed firmware for the KRIA custom board, enabling precise RADAR data acquisition through ADC and MIPI interfaces. By integrating advanced DSP filters and a sequencer for sweep synchronization, I enhanced the accuracy and reliability of RADAR signal analysis. Automation of Custom Board Bring-up and Testing: I designed test firmware for GPIOs, I2Cs, SPIs, UARTs, MIPI, SFP, and Ethernet PHY, and automated the test procedure. This effort streamlined the testing process and ensured efficient validation with minimal user interaction. H.264 Video Codec Expertise: I successfully ported and optimized VHDL-based H.264 decoders, achieving real-time 1080p video streaming. My focus on quality assurance and hardware optimization resolved timing issues and ensured seamless integration with HDMI display output. RISC-V ISA: I have implemented hazard free fully pipelined RISC-V ISA using system Verilog and integrated it with CNN accelerator model of ARM I can help you with Digital System design projects building Data paths and Control units using Verilog. Microprocessor Projects using C or assembly languages(ARM, MIPS, 8051, AVR): I have experience with embedded system projects using ARM development boards such as tiva tm4c123 launchpad, LPC1114 and stm32F4 development board on Keil using C and assembly. If you are looking for an expert to do microprocessor projects, I can help you. I like to do assembly coding projects on Edsim51 simulator using 8051 assembly. I have strong grip on C/C++ related projects (Game of Life, Huffman encoding, Level Detector simulator using FreeRTOS)
    Featured Skill Field-Programmable Gate Array (FPGA)
    VHDL
    SystemVerilog
    Assembly Language
    Verilog
    FPGA
    Digital Design
  • $15 hourly
    • 4.7/5
    • (8 jobs)
    I am a design engineer with experience in FPGA & Microcontroller related projects for small and medium-sized businesses. I’m experienced in different FPGA boards and microcontrollers, MATLAB, C, C++, Verilog I’ll fully project manage your brief from start to finish Regular communication is really important to me, so let’s keep in touch!”
    Featured Skill Field-Programmable Gate Array (FPGA)
    Deep Learning
    Electronic Circuit Design
    C
    VHDL
    Microsoft Visual C++
    Verilog
    Python Script
    SystemVerilog
    Mathematics Tutoring
    MATLAB Script
    Microcontroller Programming
    PIC Programming
    MATLAB
    FPGA
  • $25 hourly
    • 5.0/5
    • (7 jobs)
    PROFILE SUMMARY * Research interest and expertise in ASIC/VLSI Design. * Proficiency in design and development of FPGA -based systems. * Eight years of work experience in Research & Development and Academia. * Hands on experience in industrial tools of Mentor Graphics and Cadence. * Familiar with the complete IC design flow using open-source tools. * Proficient in C++ and Verilog-HDL . Familiar with VHDL and System Verilog. * Skilled in RTL Design. Also familiar with the design verification concepts like UVM. * An experienced team leader and skilful team player with persuasive leadership, communication, and interpersonal skills. DETAILS: I have a Master's and Bachelor's Degree in Electrical Engineering with a specialization in Electronics. I have 10 years of work experience in project development, research, and academia. I am also the founder and CEO of two startups including PowerSavers and DockForms.. I can provide assistance in the following domains. ⭐ Technical ⭐ → Programming for Arduino, Microcontroller, RaspberryPi, Jetson, FPGA → Complete Embedded and Digital System Design → Circuit Diagram, simulation, and PCB Design. ⭐ Non-Technical ⭐ → Project design document, report, presentation, and evaluation. → Statement of purpose, research proposal, and motivation letter. → CV, resume, and cover letter. → Blog posts with SEO. → Business plan, funding forecast, investors brief. → Pitch Deck → Social media handling and marketing ֎List of skills֎ → Configuration of multiple sensors including Ultrasonic, IR, Pressure, Temperature, Humidity, Flow, Level, and Tachometer. Familiar with installation and working of fire, smoke, and gas alarms. Also worked on PIR and RFID. → Expertise in PIC and Arduino. Also worked on Raspberry pi, ZigBee, RTOS, and TinyML. → C/C++ Verilog, VHDL, Python. → ModelSim, Xilinx ISE, Xilinx VIVADO → Leonardo Spectrum, Pyxis Schematic, Pyxis Layout, Eldo, Calibre, Cadence Virtuoso. → XSCHEM, Ngspice, Magic VLSI, Netgen, Openlane → MATLAB, MS Visio, Express PCB, PSpice, MultiSim, Proteus, MikroC, MPLAB. → SM/GPS, Bluetooth, Wi-Fi, HC-12, RS-232, SPI, I2C, USB. →LaTex, MS Office, Zotero, EndNote. ֎List of completed projects֎ →Low-Cost Egg Incubator for Multiple Birds. →Bluetooth, RF, and IoT-based home automation solutions →Wireless Smoke Alarm System. →RFID and Wi-Fi-based single door lock system. →RFID-based centralized door lock system for five doors. →Brain-controlled wheelchair. →Human following robot using Raspberry Pi. →Collision avoiding and ball potting robot. →6 DoF Pick and Place Robotic Arm →Adaptive cruise control implementation on robots. →Driver assistance system →Black Box for vehicles →The fleet management system of consumer vehicles. →GSM-based Energy Meter.
    Featured Skill Field-Programmable Gate Array (FPGA)
    FPGA
    GSM
    Arduino
    C++
    Content Writing
    Home Automation
    Verilog
    C
    Embedded System
    Electronic Circuit Design
    Microcontroller Programming
    Elevator Pitch
    Digital Electronics
    Presentations
    Electrical Engineering
  • $25 hourly
    • 5.0/5
    • (7 jobs)
    ✅ 100% Client Recommendation ✅ Top Embedded and Firmware developer ✅ Top Hardware designer ✅ Top Mechanical design and industrial design ✅ Top Enclosure design 🚀 Providing FULL-CYCLE design from Idea to Mass Production: Electronics, Firmware, Product Design, Mobile Software, Prototyping, Manufacturing. HARDWARE: - Schematic capture: Digital, Analog, Power electronics - PCB Layout: Altium Designer, EasyEDA, KiCAD, Eagle (1 - 10 layers) - Component selection, BOM generation, manufacturing documents PRODUCT DESIGN: - Conceptual industrial design - Mechanical design in SolidWorks, Fusion 360 (Molded Plastic and Sheet Metal) FIRMWARE: - FPGA firmware in VHDL and Verilog for Altera/Actel/Xilinx FPGAs and SoCs - MCU firmware in C/C++ for ARM, TI, NXP, Atmel, PIC, Arduino, ESP32, STM32 - Bluetooth, Bluetooth Low Energy (BLE), and wireless modules programming PROTOTYPING: - PCB Prototype manufacturing, debugging, and validation - Consultation on any aspect of design and manufacturing HIGHLY SPECIALIZED IN: CONSUMER electronics - IoT projects, sensors, wearable electronics, Smart-home systems - Computer peripheral devices (HID and custom devices) INDUSTRIAL electronics: - High-reliability systems for critical applications (Robotics, Oil and Gas, Automation) - Micro-controller and FPGA-based Control systems; - Power Supplies (AC/DC/AC) and Electric Drives (240/480VAC) WIRELESS communication: - Bluetooth and BLE-enabled devices (Bluetooth 4.0/4.2/5.0, BLE. GATT, A2DP); - 2.4Ghz radio transmitters (WiFi, Bluetooth, Radio) - 300/400 Mhz Custom analog and digital radio AUTOMOTIVE / ELECTRIC VEHICLES: - On-Board Chargers (OBC) - Battery-management systems (BMS) ************************************************** TOOLS AND DEVICES: *PCB* : Altium Designer, KiCAD, EasyEDA *FPGA and SoC* : VHDL, Verilog, ModelSim, Quartus, Xilinx ISE, Libero Soc. Altera Cyclone 2, Cyclone 4, Max 9, Max 10. Xilinx Spartan, Zynq, Virtex, Kintex. *BLUETOOTH* : CSR8670 / BC04 / BC05. TI: CC2640, CC2650, CC2541, CC3220. *MCU* : ARM Cortex A, ARM Cortex M. NXP LPC4370 TI C2000 (Piccolo, InstaSpin), MSP430, MSP432 Atmel: Atmega2650, Attiny Tags: Electrical Engineer, Electrical Engineering, Electronics, Hardware, Firmware, PCB, PCB layout, Board layout, Schematics, Altium Designer, IoT, Internet of Things, Power Electronis, Bluetooth, BLE, TI, Texas Instruments, FPGA, SoC, VHDL, Verilog, Xilinx, Altera, VHDL, C, C++, MCU, RTOS, Microcontroller, prototype, validation, Enclosures, BMS, SolidWorks, Android, iOS, Java, Swift, Mobile Apps, Database, React, PostGre, AWS, Python.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Internet of Things
    Product Design
    Industrial Design
    KiCad
    PCB Design
    Altium Designer
    Electronic Design
    Product Development
    FPGA
    Firmware
    STM32
    nRF52
    Raspberry Pi
    Embedded System
    ESP32
  • $30 hourly
    • 5.0/5
    • (11 jobs)
    I have vast experience in FPGA verilog and vhld. Experience in vivado HLS, matlab, visual studio and C I have a good experience in PCB design. I mainly use Altium Designer and Cadence (Design Entry HDL & Allegro) as tools to design control, RF and High Speed Digital Circuits. A common approach is as follows: System engineering FPGA verilog VHDL MicroControlllers/Processors Communication data link expert SDR Schematic PCB Manufacturing files (Gerber files).
    Featured Skill Field-Programmable Gate Array (FPGA)
    Mathematics
    FPGA
    DICOM
    CDMA
    VHDL
    Verilog
    Digital Interface
    MATLAB
    Digital Signal Processing
    PCB Design
  • $40 hourly
    • 3.9/5
    • (20 jobs)
    A seasoned embedded developer who is Creative, results driven and having experience of over 30 years in design/development. Problem solver with a passion for using technology effectively to improve products; skilled in grasping the big picture, conceptualizing and implementing solutions. Results oriented, recognized for resolving critical issues to ensure success. I have worked on firmware design for embedded systems for different projects in IoT, GNSS, IMU, DGPS and RTK and computing domains, building projects from scratch to delivery. Anti-Jamming, Anti-Spoofing of GNSS Systems. I have done this using SDR, employing GNSS-SDR/iotSDR/pocketGNSS piksi GNSS and other custom SDR. I have also worked on IMU (Inertial Measurement Unit), LiDaR (Light Detetion and Ranging), AHRS (Attitude and Heading Reference System), INS (Inertial Navigation System), FCC (Flight Control Computer) etc. I have also worked on DSP, Audio and Acoustic Signals, Algorithms implementation. I have good command of C and C++ languages. Also know assembly language of many processors, including, 8-bit and 32 bit microprocessors e.g. AVR, STM32, ESP32 and different variants of ARM. I have worked on TI DSPs, intel 8086, STM32, ESP32, Xilinx ZYNQ processors, from scratch to design, development to production, bring-up, Firmware in baremetal, Small OS (uCOS, free RTOS) and large OS like Linux.
    Featured Skill Field-Programmable Gate Array (FPGA)
    PCB Design
    Firmware Programming
    Atmel AVR
    Internet of Things
    Digital Signal Processing
    GPS
    Electrical Engineering
    Arduino
    Embedded System
    C++
    C
    STM32
    ESP32
    FPGA
    Firmware
  • $60 hourly
    • 4.6/5
    • (18 jobs)
    ◾Cryptography ◾ C/C++, Python, Bash Scripting ◾Information security ◾ Reverse Engineering ◾ Malware Analysis ◾ Network Security ◾ Research and Development (Research Paper) ◾ Information security Article writing ◾ Academic assignments and problem solving ◾ Cryptology +▪️Encryption +▪️PKI +▪️Post Quantum Cryptography(PQC) +▪️Multi-Party Computation(MPC) +▪️Digital Signature and Certificates +▪️Authentication and Identification +▪️Hash Functions +▪️Protocols and mechanism +▪️Key Establishment and Management +▪️Zero Knowldge Proof +▪️ECC
    Featured Skill Field-Programmable Gate Array (FPGA)
    Security Analysis
    Linux
    Academic Research
    Encryption
    Penetration Testing
    Reverse Engineering
    FPGA
    Xilinx
    Verilog
    CUDA
    Python
    C++
    C
    Information Security
    Cryptography
  • $30 hourly
    • 5.0/5
    • (51 jobs)
    After completing my MS in Electrical Engineering from Linkoping University Sweden, I started my PhD in field of Medical Image processing from COMSATS University Islamabad. The research involved the exploration of inverse problems for MR image reconstruction (Publication: Singular Value Decomposition Using Jacobi Algorithm in pMRI and CS). I also worked on the acceleration of Image Reconstruction algorithms using Graphics Processing Units (Publication: Optimizing Image Reconstruction in SENSE Using GPU). I used C++ and CUDA architecture to exploit the parallelism in MRI reconstruction algorithms. I had also worked (In Linkoping University with Dr. J. Jacob Wikner during my PhD from April – September 2017) on designing a Chip for the proposed algorithm for real time image reconstruction on MRI scanners (Publication: ASIC Model of SENSE to Accelerate MR Image Reconstruction). The publication was in lime light among researchers from different countries at Joint Annual Meeting of ISMRM and ESMRMB, organized in June 2018 in Paris France. During my PhD, I also learnt about the process of data generation from within the tissues. I have also studied and understood how the protons within the tissue are excited to generate required signals for image acquisition. The understanding of the data generation principles helped me a lot to understand and develop the reconstruction algorithms efficiently and to perform real time reconstruction of MR images. I worked on different MR acquisition principles where the data was acquired from multichannel receiver coils. The algorithms, involved in my research, are capable of incorporating the sensitivity maps which are acquired from multichannel receiver coils to get artifact free images. I worked on different algorithms which include SENSE (an image domain-based reconstruction algorithm to get artifact free image from multichannel data), GRAPP (a k-space based reconstruction method to reconstruct multichannel undersampled data without the need to sensitivity maps) and Compressed Sensing (which is an iterative approach to get reconstructed images). I have worked on an advanced algorithm of Compressed Sensing (known as L+S Decomposition Model) where we separate the heart structure and blood flowing within the heart. It is a time domain approach as it separates this information present in different frames. All the algorithms mentioned here are very time-consuming processes. So, to overcome this issue, I designed parallel architecture of all these models which is executed on GPUs (using multiple cores). The results achieved from GPUs are significantly improved in terms of reconstruction time, but still we have issues with limited memory available for computation on GPUs. So, after completing my PhD in September 2018, I started exploring application of deep learning for bio-medical image processing. I have studies about the different platforms which could be used for deep learning (using tensor-flow). There are different networks which include U-Net and variational networks, which are to be used for biomedical imaging. Until know (after reading about deep learning in medical image processing) I can safely say that deep learning seems to be the future of medical imaging. Moreover, I have been involved in hardware work on Raspberry pi and microcontrollers. I have been involved in robot competitions as well. I am also involved in PLC and SCADA work. We have been working in industry for past 8 year. We have worked on PLCs in Engro Fertilizers, Cigarette Companies, Pharmaceuticals etc.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Microcontroller Programming
    Microcontroller Design
    Raspberry Pi
    Report Writing
    PLC Programming
    Medical Imaging
    Image Editing
    FPGA
    Image Processing
    Python
  • $30 hourly
    • 4.5/5
    • (6 jobs)
    Hi there, I'm an Electrical Engineer, and I've 3 years experience in the field of Digital Logic Design, FPGA design, Verilog, VHDL & System Verilog programming. I've done more than 130 projects on other freelancing platforms, and now I am available on Upwork. I'm a teacher as well. There is nothing more I love than teaching Verilog programming to online students. I've work experience in following software. Intel Quartus Prime Xilinx Vivado Modelsim Multisim Matlab TinkerCAD Proteus Logisim Logic.ly I can design and simulate any of the following things and more. Boolean algebra Karnaugh maps Gate circuits Encoders/Decoders Multiplexers/Demultiplexers Adder/Subtractor Combinational/Sequential circuits Latches/Flip flops Registers/Counters Memory(RAM/ROM) Register files Arithmetic Logic Unit(ALU) Custom Processors design Traffic control Finite State machines Data path and control units And many more... If you have something that is not listed above, please contact me. Thanks for visiting.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Embedded System
    FPGA
    Electronics
    Electrical Engineering
    Circuit Design
    Digital Electronics
    Electronic Circuit Design
    VHDL
    SystemVerilog
    Verilog
  • $20 hourly
    • 0.0/5
    • (1 job)
    📌Embedded Systems Engineer with an industry experience of 3 years in IoT and smart home automation. With a major in Mechatronics Engineering, I can design and develop your ideas to final product. I have an extensive experience in embedded software, firmware design, development and testing. Microcontrollers and Controllers: ✅ ESP32 (Espressif IDF and Arduino) ✅ AVR (Atmega8, Atmega16/32, Atmega328) ✅ Arduino ✅ Raspberry Pi ✅ NVIDIA Jetson Modules ✅ FPGA Spartan 6 Peripherals: ⚡ Sensors (Temperature, Current, Accelerometer etc.) ⚡ Actuators (Servo Motor, Stepper Motor, DC Gear Motor, Solenoid etc.) ⚡ Battery (Li-On, Li-Po, BMS etc.) ⚡ Displays (LCD, OLED etc.) Programming Languages: ⭐ C ⭐ C++ ⭐ Python Skills: ✨ Algorithm Development ✨ Problem Solving ✨ Program Logic ✨ OOP ✨ Data Structures Communication Interfaces: ▶️ Wi-Fi ▶️ UDP ▶️ TCP ▶️ UART ▶️ SPI ▶️ I2C ▶️ NFC Other than that, I have done multiple projects like IoT smart lock device, smart cooler project, person tracking system, smart switch etc. 📌
    Featured Skill Field-Programmable Gate Array (FPGA)
    Firmware Programming
    FreeRTOS
    Machine Learning
    NVIDIA Jetson
    C++
    C
    Internet of Things
    FPGA
    Raspberry Pi
    Python
    Embedded C
    ESP8266
    ESP32
    Arduino
    Embedded System
  • $25 hourly
    • 0.0/5
    • (0 jobs)
    🔬 Welcome! I'm Iqrar H, an engineer and a programming wizard specializing in automation and CAD tools. 🛠️ What I Offer: 1. LABVIEW: Solutions for data acquisition, control, and measurement. 2. SolidWorks: 3D model concept, design & Rendering. Giving 3D shape to ideas or a sketch in mind. 3. Embedded Software Development from URS to the final product. Also efficient in C++ and arduino coding. 4. FPGA based firmware development using Xilinx and ModelSim E 5. Converting Webpage design to Responsive webpage using HTML, CSS and Bootstrap 🌟 Why Choose Me: 1. Experience: 7 years of successful Experience. 2. Innovative: Creative problem-solving for complex challenges. Lets Connect and Roll!
    Featured Skill Field-Programmable Gate Array (FPGA)
    Bootstrap
    CSS
    HTML
    Printable 3D Models
    Adobe Dreamweaver
    Xilinx
    Firmware Programming
    Verilog
    MATLAB
    SolidWorks
    LabVIEW
    Arduino
    FPGA
    C++
    Embedded C
  • $6 hourly
    • 0.0/5
    • (0 jobs)
    Profile As a PCB designer my area of expertise includes High Speed PCB Layouts, Rigid/Flex/Mix Signal/RF/Embedded Systems/Analog/Control Impedance/Power PCB's expert. Schematic Capture/Bill of Materials/Reverse Engineering/PCB fabrication/Concept to Assembled PCB service. For PCB Designing, i use different Softwares including Allegro, Altium and Kicad. I do FPGA and Microcontrollers programming as well by using ISE suite Design and Microcontrollers IDEs. I can Simulate MCU by using Proteus.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Simulink
    Microcontroller Programming
    Microcontroller Design
    FPGA
    RF Design
    Analog Electronics
    Power Electronics
    Digital Electronics
    Digital Signal Processing
    OrCAD
    KiCad
    Altium Designer
    PCB Design
    Multilayer PCB
    Electrical Engineering
  • $15 hourly
    • 0.0/5
    • (0 jobs)
    I am an electrical engineer have industrial experienced in FPGA design and development. Whether it's optimizing hardware performance, implementing complex algorithms or building custom digital systems from the ground up I'm here to help with a solid foundation in FPGA technologies, I offer: ➤Tailored, efficient and scalable solution based on your specific project needs. ➤ End to end project management from concept to final deployment. ➤ Consistent communication ensuring transparency and allignment throughout the process. If you are looking for a reliable partner to bring your hardware ideas to life. let's connect and make it happen!
    Featured Skill Field-Programmable Gate Array (FPGA)
    Linux
    C Shell
    Arduino IDE
    ESP32
    C
    Computer
    Xilinx
    SystemVerilog
    Verilog
    FPGA
    Electrical Engineering
  • $20 hourly
    • 0.0/5
    • (0 jobs)
    I am a disciplined engineer and analyst who works where mathematics, hardware, and clear-headed reasoning meet. My professional interests span three domains: 1. Digital Systems & FPGA Design – crafting logic that is lean, deterministic, and ready for real-time demands. 2. Scientific Computing & Imaging – translating continuous phenomena into discrete insight with signal processing, optimization, and high-performance code. 3. Data Integrity & Financial Assurance – applying an accountant’s precision to safeguard information, evaluate risk, and uphold trust. Across these fields I value: - Rigor – every solution must be explainable, testable, and reproducible. - Simplicity – the simplest design that meets the requirement is the one that endures. - Reliability – tools, documents, and relationships must all be worthy of long-term use. I write in C/C++, Python, and hardware description languages; think in linear algebra and control theory; and communicate in concise, audience-first prose. I respect deadlines, welcome constructive debate, and believe quiet consistency outperforms loud ambition. If your work calls for steady hands, patient analysis, and results that speak for themselves, I am ready to contribute.
    Featured Skill Field-Programmable Gate Array (FPGA)
    PCB Design
    VHDL
    Linux
    C++
    C
    Verilog
    FPGA
    Digital Design
    Embedded Linux
    Embedded System
  • $20 hourly
    • 5.0/5
    • (7 jobs)
    I am an Electrical Engineer with 6 years of product design experience. I am proficient in hardware design both in digital domain (FPGAs, Processors and Controllers) as well as analog domain (ADCs, DAQs ect).
    Featured Skill Field-Programmable Gate Array (FPGA)
    STM32
    ESP32
    Hardware Prototyping
    Firmware Programming
    Python Script
    C++
    C
    PCB Design
    Embedded System
    Verilog
    Embedded Linux
    Hardware Design
    FPGA
  • $10 hourly
    • 0.0/5
    • (0 jobs)
    I’m a Hardware Design Engineer specializing in FPGA development, RTL design, and high-speed data interfaces. With hands-on experience in building custom logic for Xilinx platforms like Alveo U50, ZCU102, and Zybo, I deliver optimized, low-latency, and resource-efficient designs using Verilog/SystemVerilog and Vivado. I’ve led the development of 10Gbps and 40Gbps TCP Offload Engines (TOE), integrating DDR interfaces, PCIe-DMA bridges, and clock domain crossing (CDC) logic for high-throughput performance. My work includes designing AXI-based scatter-gather DMA systems, handling continuous streaming data, and ensuring MTU-compliant packet construction with full control of Tx/Rx paths. Whether it's implementing custom protocols, integrating Zynq PS with programmable logic, or debugging complex data paths with Wireshark and logic analyzers, I bring a complete hardware-software co-design perspective. Beyond FPGAs, I actively work with Raspberry Pi boards for rapid prototyping and hardware control applications. I develop Python-based scripts and tools to interface with sensors, peripherals, and serial communication interfaces. I’ve also built Python GUI applications (using frameworks like Tkinter and PyQt) to create user-friendly control panels for hardware debugging and system monitoring. Skills & Tools: FPGA | Verilog | VHDL | AXI DMA | Zynq SoC | Vivado | High-Speed Ethernet | RTL Design | DDR/PCIe Integration | Logic Debugging | Xilinx IPs | SystemVerilog | Wireshark Analysis | Raspberry Pi | Python | Python GUIs (Tkinter, PyQt) Let’s connect if you're looking for reliable, high-performance FPGA solutions tailored to your system’s needs.
    Featured Skill Field-Programmable Gate Array (FPGA)
    Hardware Description Language
    Verilog
    Tcl/Tk
    NumPy
    Python
    Raspberry Pi
    FPGA
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Field-Programmable Gate Array (FPGA) Specialist near Islamabad, on Upwork?

You can hire a Field-Programmable Gate Array (FPGA) Specialist near Islamabad, on Upwork in four simple steps:

  • Create a job post tailored to your Field-Programmable Gate Array (FPGA) Specialist project scope. We’ll walk you through the process step by step.
  • Browse top Field-Programmable Gate Array (FPGA) Specialist talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Field-Programmable Gate Array (FPGA) Specialist profiles and interview.
  • Hire the right Field-Programmable Gate Array (FPGA) Specialist for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Field-Programmable Gate Array (FPGA) Specialist?

Rates charged by Field-Programmable Gate Array (FPGA) Specialists on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Field-Programmable Gate Array (FPGA) Specialist near Islamabad, on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Field-Programmable Gate Array (FPGA) Specialists and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Field-Programmable Gate Array (FPGA) Specialist team you need to succeed.

Can I hire a Field-Programmable Gate Array (FPGA) Specialist near Islamabad, within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Field-Programmable Gate Array (FPGA) Specialist proposals within 24 hours of posting a job description.

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.