Hire the best HVAC System Designers in Lebanon

Check out HVAC System Designers in Lebanon with the skills you need for your next job.

Get started

$20 hourly
Karim D.
- 5.0/5
- (10 jobs)
I have 10 years of experience in HVAC and plumbing. I am expert in radiant heating and plumbing having state of the art engineering software for energy efficient design based on European and American Standards. Looking for long term relationships with engineering offices where I can show my expertise in the HVAC field while contributing to the company.

HVAC System Design
HAP
Underfloor Heating Design
Drafting
2D Design
Mechanical Engineering
Plumbing
Mechanical Design
AutoCAD HVAC Loads Calculations
MEP Design
Bluebeam Revu
Autodesk AutoCAD
$25 hourly
Mohamad D.
- 5.0/5
- (83 jobs)
Full MEP Design for Canada and US permit submissions. Providing MPF Services: - Mechanical HVAC: Design for all A/C systems, Heat Loads Calcs, Ventilation Requirements, Ducting, Piping, etc.. - Sanitary & Drain: Indirect Waste, Direct Waste, Rain Water, Grey & Black Water, Lift Stations, Booster Pumps, Pipe Sizing, Loads Sizing, Riser Diagrams, Equipment Selections, etc.. - Water Supply: Domestic Water, Hot Water, Return Hot Water, Loads Calcs, Pipe Sizing, Equipment Selections, Grey Water, Fertilizer System, Riser DIagrams, etc.. - Gas: Loads Calcs, Piping, Sizing, Riser Diagrams, Propane/CO2 Tanks sizing, etc.. - Fire Protection: Hydraulic Calcs, Piping, Pipe Sizing, Sprinkler Selections, Fire Pumps Selections, Jockey Pumps Selections, Water Storage Tank Calcs, Riser Diagram, etc.. Codes Expertise: - American Society of Heating, Refrigerating and Air-Conditioning Engineer (ASHRAE) - American Society of Plumbin Engineer (ASPE) - International Building Code (IBC): IMC, IPC, IFC, IECC - Uniform Building Code (UBC): UMC, UPC - National Fire Protection Association (NFPA): NFPA 10, NFPA 13/13R/13D, NFPA 20 - US Cities adopted codes with their specific amendments. - Canada Standards Associations (CSA) - Technical Standards and Safety Authority (TSSA) Software Skills: - AutoCAD - HAP-Carrier (Heat Loads Calcs) - WrightSoft Manual JSD (Heat Loads, Ducting and Selection) - Duct Sizer - Fire-Elite (Fire Hydraulic Calcs and Pipe Sizing) - Pipe Flow Expert (Liquid and Gas Networks Calcs) - Bluebeam Revu - MS Office I am Senior Mechanical Design Engineer with 6+ y.o.e in Consultancy, Design and Contracting firms. Briefly about my daily basis tasks: - Obtaining worldwide Residential and Commercial projects for full MEP design. Mainly for USA, Canada and Gulf Countries Projects, - Attending meeting with clients/owners for project discussion. Preparing Checklist for the project's systems requirements. - Final submission for the city/county permits approval. - Design HVAC systems as per IMC, CMC & T24, ASHRAE Standard Code and Canada Code. Most HVAC Systems I have designed are Gas Furnace, Heat Pumps, Rooftop Units, Fan Coil Units, VRVs, Multi-Zone Units, Chiller & Boiler Systems, Gas Heating/Electrical Cooling Systems, Energy/Heat Recovery Ventilators, etc... - Design Plumbing Systems as per IPC, UPC, ASPE and CPC. Including Sanitary Systems, Water Supply Systems, Rain Water and Harvesting Systems, Septic Tanks, Grease Interceptors, Gas/Elec. Water Heaters, etc... - Design Fire Systems as per NFPA-13/13D/13R, NFPA-14, NFPA-96, IFC, CFC and CPC. Including Fire Hydraulic Calculations using Fire-Elite software and CPC Calculations. - Design Gas Systems serving all gas equipment and appliances as per NFPA-54 and CPC. - Submit all required drawings for permit such as General Notes, Code Notes and Installation requirements, Design Drawings, Calculation notes, Equipment Selection, and General Details. - Equipment Selection for Mechanical, Plumbing and Fire systems as per Codes and Energy regulations by City/County. In addition: I presently work in as Project Manager Engineer in Generators and Fuel Systems deparment. My tasks are: - Designing Emergency power diesel generators systems in compliance with CSA B-139 and TSSA new regulations. - Coordinating with other disciplines to ensure a timely and accurate flow of design. Site inspections to make sure adherence to approved design and quality. - Support client and internal design reviews. Perform client print reviews and identify necessary changes to drawings. - Coordinate and visit job site as required, to resolve problems, interpret drawings and documents and provide technical support during the construction phase, and ensure that the contractor is abiding with all the provisions of the contract, and to identify and report variances and recommend corrective actions where necessary.

HVAC System Design
Mechanical Design
AutoCAD HVAC Loads Calculations
Storm Water Management Model
HAP
Drainage
Autodesk AutoCAD
Fire Protection Engineering
Mechanical, Electrical & Plumbing Systems
Plumbing
Mechanical Engineering
Stormwater Management
$50 hourly
Mohammad B.
- 4.9/5
- (2 jobs)
I manage an MEP design company with a skilled team of 10 engineers. We have completed over 700 projects across the US and Canada, including residential, commercial, and hospitality spaces. Our strength lies in our responsiveness, efficiency, and deep knowledge of code requirements, especially T24 and energy compliance standards. We deliver quality designs swiftly, ensuring compliance with city standards. We’re not just engineers; we’re dedicated partners committed to bringing your vision to life with precision. I look forward to collaborating on your next project.

HVAC System Design
PV System Design
Energy Simulation
Electrical Engineering
Plumbing
Mechanical, Electrical & Plumbing Systems
Autodesk AutoCAD
Commercial Design
Autodesk Revit
Residential Design
Title 24
MEP Design
$35 hourly
Sami A.
- 5.0/5
- (53 jobs)
I have MEP company that served tens of happy clients 2200+ completed MEP projects and permits all over USA outside Upwork. Now I'm sharing my experience on Upwork. My team consists of experienced electrical, mechanical, plumbing engineers, and energy engineers. I am ready to provide the following services: - MEP permit sets for residential and commercial projects - T24 Compliance reports in CA - Comcheck / Rescheck energy reports - Photometric studies - PV designs - Manual JSD - Fire sprinkler design / Fire alarm design - Stamping for MEP permit sets in the following states: California, Alabama, Arizona, Arkansas COA, Arkansas, Louisiana, Maryland, Michigan, Nevada, New Mexico, North Carolina, Texas, Colorado, Florida, New York, Georgia Looking forward to hear from you!

HVAC System Design
Load Calculation
Mechanical, Electrical & Plumbing Systems
MEP Design
Commercial Design
Commercial Building
Residential Design
Microsoft Word
Microsoft Excel
Building Design
DIALux evo
Autodesk Revit
ETAP
Autodesk AutoCAD
Electrical Engineering
$55 hourly
Moe A.
- 4.8/5
- (406 jobs)
I have a company that works only for US Market. During the past 3 years, we were able to complete 1200 Projects all the way to the city approval. My team consists of: - 12 Mechanical, Plumbing and Fire Engineers. - 8 Electrical engineers - 5 Senior MEP Engineers - 2 project coordinators - 3 Energy Compliance engineer such as Rescheck, comcheck and T24 - An entity of 3 QC Engineers which set the main requirements for all projects, gather all city comments and include them in the design and Check all drawings before submission to the client. - 1 Accountant - 1 R&D - A team of 3 Architects. - A team of 5 structural engineers - A team of 3 Engineers that work on QS using Bluebeam Revu. I am interested in long terms cooperation to play the role of your technical office. I work between 6 AM and 3 PM PST. I have virtual US numbers. I can send you a price list showing all my price estimate upon request. Please check my portfolio for project samples Hope to hear from you soon

HVAC System Design
eQUEST
Mechanical Design
EnergyPlus
Estimator
MEP Design
Engineering Design
Plumbing
HAP
AutoCAD HVAC Loads Calculations
Electrical Drawing
DesignBuilder
3D Rendering
Floor Plan Design
$30 hourly
Cynthia E.
- 5.0/5
- (7 jobs)
Experienced Project Manager with an MBA & DESM and a demonstrated history of working in both mechanical and electrical engineering construction systems with a knowledge in the field of management. Graduated from ESA-Beirut, ESCP-Paris and NDU- Beirut.

HVAC System Design
Microsoft Office
Plumbing
Construction
Budget
Budget Proposal
Autodesk AutoCAD
Mechanical Engineering
$11 hourly
Joseph S.
- 0.0/5
- (0 jobs)
A dedicated Engineer with more than 5 years of experience in technical and Mechanical Engineer, responsible for the design and shop drawing using BIM (REVIT, NAVISWORK, BIM360), installation, maintenance, and repair of MEP systems, demonstrating an understanding of electrical system. Seeking to work in an environment that is conducive to my intellectual, professional, and personal growth, where I can contribute significantly to the growth of the team/organization with strong experience and expertise leading to success.

HVAC System Design
PV System Design
Electrical Design
Plumbing
Energy
Microsoft Excel
Mechanical Engineering
Autodesk Revit
$25 hourly
Charbel N.
- 0.0/5
- (0 jobs)
Mechanical Engineer A mechanical engineer with hands-on experience in all levels of testing, including performance, functional and user acceptance. I define myself as a highly committed professional who always does at the top of his capabilities. Serious, motivated, and rigorous putting forward my technical and interpersonal skills to carry out projects that you could entrust to me. Swimming Pools, sewage treatment plant, reverse osmosis, water treatment full design

HVAC System Design
Thermodynamics
Material Design
Tender Document
Design Concept
Plumbing
Waterfall
Water Treatment Engineering
SolidWorks
MATLAB
HAP
Autodesk Revit
Autodesk AutoCAD
$30 hourly
Hussein A.
- 0.0/5
- (0 jobs)
Combining adeptness in HVAC design and HAP software with expertise in plumbing design and AutoCAD, I bring a robust skill set to the realm of mechanical engineering. My proficiency extends beyond technical design to encompass strong research skills, facilitating thorough analysis and informed decision-making throughout project lifecycles. Leveraging AutoCAD, I produce precise plans and drawings, while my comprehensive understanding of HVAC and plumbing systems ensures optimal functionality and compliance with industry regulations. Whether conceptualizing innovative solutions or refining existing designs, my commitment to excellence drives me to deliver results that exceed expectations.

HVAC System Design
Mechanical Design
HAP
Plumbing
Autodesk
$17 hourly
Hovig A.
- 0.0/5
- (0 jobs)
1) Project management, Design of project, Procurement, Calculations, Cad drafting for plumbing, drainage, firefighting, HVAC systems. 2) Video editor 3) Chess Instructor

HVAC System Design
Project Management
Site Planning
Plumbing
Load Calculation
Microsoft Project
Microsoft Office
Autodesk AutoCAD
CAD Drafting
$25 hourly
Anas I.
- 0.0/5
- (0 jobs)
Mechanical Engineer | AutoCAD, SolidWorks & HAP Specialist I am a detail-oriented mechanical engineer with expertise in AutoCAD (2D/3D), SolidWorks (design & animations), and HAP calculations. With experience in engineering drawings, 3D modeling, and technical report writing, I ensure precision and efficiency in every project. Key Skills: ✔ AutoCAD 2D & 3D Drafting ✔ SolidWorks 3D Modeling & Animations ✔ HAP (Hourly Analysis Program) Calculations ✔ Engineering Drawings & Technical Reports ✔ Microsoft Office & Inventor 3D CAD I hold a Bachelor’s in Mechanical Engineering and am currently pursuing my Master’s. My experience includes working as a Site Engineer Intern and volunteering as an Emergency Medical Technician. Let’s collaborate to bring your ideas to life—message me to get started!

HVAC System Design
Microsoft Office
Microsoft Excel
HAP
Autodesk AutoCAD
SolidWorks
Engineering & Architecture
3D Animation
CAD
Want to browse more freelancers?
Sign up