Hire the best Hardware Prototyping Specialists in Ukraine

Check out Hardware Prototyping Specialists in Ukraine with the skills you need for your next job.
  • $45 hourly
    Main work profile: battery chargers, USB Power Delivery, analog interfaces for sensors, low and high-speed ADCs, Bluetooth and wired data exchange, onboard local power sources (step-up, step-down, etc...), making basic firmware for: STM32, ESP32, PIC, AVR using native frameworks or/and Arduino framework, libs for attached hardware. Optimizing schematics/PCB/BOM (simple IoT or simple devices based on most popular components) for fast and low cost assembly. Experience in electronics design - 19 years Deep knowledge in Altium Designer, KiCAD and P-CAD. Also can freely work in EasyEDA, Diptrace, Eagle, MultiSim
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    ESP32
    Altium Designer
    Microcontroller Design
    Electrical Layout Design
    Circuit Design
    Arduino
    Digital Electronics
    C#
    Electronics
    KiCad
    Embedded System
    Bluetooth
    Electrical Engineering
  • $40 hourly
    Expert level electrical and some mechanical/industrial design engineer with 25+ years of experience in the electronic systems hardware development. 3D design of electronic housing. Design from concept to mass production, prototyping and manufacturing. -Electronic circuit and PCB design including multilayer, high-speed, HDI, BGA, -Generation of full manufacturing packages including Gerber files, -Design and development of analog and digital systems, -Laboratory measurement and testing -Troubleshooting and repairing of equipment remotely -Consulting and online support -3D hardware design of enclosure and stack PCB assemblies using SolidWorks -Digital and analog wireless RF, impedance matching, microstrips, EMI, EMC -Antenna design including PCB antennas, feeders -Low power & battery operated devices, fast charging, Solar and other energy harvesting -Motor control -Optic -3D printing, milling and lathe service. I am experienced in: Altiun Designer SolidWorks Protel, PCAD STM32CubeMX Keil, IAR, True Studio, CooCox, AVRStudio SolidCAM, Power Mill ADSimPLL MicroWave Office MicroCap Programming languages: C, ASM Standards and technologies: UART, SPI, I2C, USB, RS232, RS485, BT.656 OLED, LCD, TFT, BLE, MIMS, GPS, RFID Extremely low power design, DC-DC converters, solar cell energy harvesting Lithium battery safe and charging, fast charging Low temperature battery powering
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Electronics
    PCB Design
    RF Design
    Altium Designer
    Analog Electronics
    RFID
    Digital Electronics
    Arduino
    Electrical Engineering
    Circuit Design
    SolidWorks
    Electronic Design
  • $40 hourly
    I am a semi-retired engineering executive with experience with energy distribution companies (gas, electricity), large and small engineering companies with diverse technical breadth and depth in Systems Design, Systems Engineering, RF Design & Analysis, intermediate level coding on small 8 to 32 bit microprocessors in C, C++. I have written several low level handlers for custom board hardware and protocols. Services: •Sub-GHz & GHz Radio Wireless Communications •Antenna Design Simulation (Ansys HFSS) •Circuit Design (AWRDE) •Schematic design and PCB layout (Altium Designer, Eagle) •Prototyping and Test Fixtures (in house) •IoT Solutions Design (Internet of Things), LoRaWAN, GNSS •Home Automation, Industrial Automation •Neural Networks and Deep Learning •Wireless Networks •Robotics (ROS - Robot Operation System) •EMI/EMC Troubleshooting Skills: •Processors STM32, Atmel/AVR, ESP32, ESP8266 •Interfaces I2C, SPI, USB, CAN, UART, ADC, SDI12, Wi-Fi, FSK, LoRa •Programming Languages: C, C++ Support Services: •RF communications consultant on a custom radio frequency project to transport data between multiple endpoints over long distance
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Arduino Firmware
    Internet of Things Solutions Design
    Embedded System
    Electronic Circuit Design
    Raspberry Pi Firmware
    Microcontroller Programming
    Digital Electronics
    RF Design
    LoRa
    Antenna Design
    Firmware Programming
    Robotics
    C
    Python
  • $50 hourly
    I am Roman, and I turn ideas into things. I'm a Ukrainian engineer and developer with background in physics and math. I work and experiment with electronics, digital fabrication and code. In my workshop in Kyiv I design, develop and build prototypes for a variety of purposes: from startups and small business automation, to sweet Halloween costumes and movie props. Here's a boring list of my skills: - Programming electronics - Arduino and other embedded boards (ESP8266, Teensy, ESP32 etc.). - Sensors, modules, and devices. Building electronic setups and finding relevant available technology to solve the problem. - Coding - C++, Java and Python. Firmware and software. - Data and protocols: UART, I2C, Ethernet, OneWire, MIDI, DMX and so on. - Digital fabrication. Designing and fabrication using CNC machines - router, laser, plasma and vinyl cutters. - Light, LED and other visual installations. Including developing custom and unique patterns, animations, generative algorithms and so on. - Processing image, video and sound - Illustrator, Photoshop, Premiere Pro, Ableton. If you're really short on cash, but have a nice or a meaningful project, I'm always willing to set you up with a special discount. You can check out some of my works in a video or in my portfolio. Thanks for giving this a minute of your time and have a great day.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Firmware
    Electrical Engineering
    Arduino Firmware
    ESP32
    Mathematics
    Firmware Programming
    Microcontroller Programming
    Robotics
    Arduino
    Physics
    Java
    Python
    C++
  • $35 hourly
    I'm good in quick design-thinking solutions, general and industrial design and team leading. I could help you in cross-discipline questions, prototyping and developing. Mentoring and supervising are also available :)
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Furniture Design
    Startup Consulting
    Technical Illustration
    Architectural Rendering
    Arts & Crafts
    Autodesk Maya
    Engineering Design
    Product Design
    Design for Manufacturing
    3D Modeling
    Concept Design
    Industrial Design
    Sketching
  • $50 hourly
    I have been working for more than 6 Years in the field of PCB designing. I take your idea and transform it into a functioning circuit, delivering design files, prototype PCBs, and detailed BOM.VHDL,Python C,C++, PCB. I have extensive experience in areas including PCB design, Embedded System, Analog and Digital Circuit Design, Circuit Simulation, OpenCV, Computer vision, 3D scanning, Artificial Intelligence, ImGUI, Linux, RPi, Arduino, etc.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Firmware Programming
    Computer Vision
    Microcontroller Programming
    PCB Design
    C++
    Embedded Linux
    Arduino
    ESP32
    STM32
    Altium Designer
    Embedded C
  • $37 hourly
    The most developed skills: • specifying the goals, expert opinions, criteria, methods • requirements analysis and management • creation of the solution concept reconciled with all parties • design of the general architecture, data structures, specifications • preparing the roadmap, implementation plan General experience: • 10 years of analysis and solution development in business • 5 years of IT project management • starting-up and development of industrial production • working-out marketing tactics and strategy, business-consulting Work style: • detection and description of implicit dependencies and basic principles • finding ways to implement task at any difficulties I'm co-owner of Future Mechanics laboratory. It is an outsourcing RnD center of the “Industrial Lab” kind. Our activities include research and development, prototyping and low-volume production of mechanical and electronic devices. We can cover both full project delivery or its part, like: • Idea refinement, concept modelling, prototyping • Hardware part of the project execution • Product preparation for mass production • Risk mitigation project audit • Existing product modification
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Business Analysis
  • $42 hourly
    Chief Technical Officer of Future Mechanics. Hardware & embedded software engineer with 10+ years of experience, specializing in the development of enterprise-level solutions. Based in Kyiv, Ukraine, "Future Mechanics" is an outsourcing RnD center of the “Industrial Lab” kind. Our activities include research and development, prototyping, and low-volume production of mechanical and electronic devices. Skills: SolidWorks, Altium Designer, Motion Simulation, Flow Simulation, MicroCap, ARM STM32, Embedded C, C++, C#, CubeIDE, Eclipse, Qt Creator
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    PCB Design
    Mechanical Engineering
    Robotics
    Embedded System
    Altium Designer
    Project Management
    Mechanical Design
    Electronic Design
    SolidWorks
  • $40 hourly
    Nordic Bluetooth, Zephyr, nRF Connect SDK, nRF Mesh, Cypress/Infineon BT/WiFi, STM32, Silabs, Espressif ESP32, NEC/Renesas/Dialog, Atmel/Microchip, Arduino preferably. C/C#/Python Have over 11 years of professional experience in electronics development, embedded systems, hardware design, IoT. In past I have worked for prosperous Startup, manufacturer company and have designed electronics products from scratch to mass production. Experienced in development and testing of embedded systems. MCU: Nordic nrf52 BT SoC. Espressif ESP32 WiFi BT. Cypress/Infineon PSoC6 BT/WiFi WICED ST STM32 F0, L4, L4+ Cortex-M0-M4. ST Bluetooth 5 BLUENRG-2 SiLabs (Energy Micro) EFM32 ARM Cortex-M3 Atmel AT90S, ATtiny, ATMEGA, XMEGA.. Microchip 12F, 16F, 18F. Renesas/Dialog (Nec) 78k. DA. Rockchip. Development Tools - Eclipse - IAR - CodeVisionAVR - Keil µVision IDE. - Visual Studio - Altium - GCC - CCS C Compiler - Arduino VERSION CONTROL/BAG TRACKING - SVN - Git - Jira - Asana
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Wearable Technology
    Atmel AVR
    PCB Design
    Sensor
    WiFi
    ESP32
    Embedded Linux
    Bluetooth
    Embedded C
    nRF52
    Arduino
  • $33 hourly
    ● HF (High frequency) electronics development - up to 100 GHz. - Development embedded antennas (PCB, AIP), UMTS, BT, NFC, 5G and others - High Frequency Low Noise Front-Ends for Satellite connections - HF antenna arrays with elliptic polarization - Filters and matching circuits for small wireless divices - Ultra low noise transistors matching ●● Designing of Lumped and Transmission Lines Filters, LC and Marchand Baluns, Diplexers for LTCC Bluetooth Wireless LAN Front-End modules ● EM shielding effectiveness analysis and measurements ● RF parts optimization, RF coupling analysis for Wireless LAN, Bluetooth, GPS, FM Laminate SIP modules ● Precision measurements using On-Wafer Prober with different probe types and different calibrations methods for RF-lines optimization and components matching (SAW filters) inside real module ● Reverse-analysis of LTCC components (filters, diplexer) from X-ray 3D-pictures to Sonnet design with subsequent simulation and optimization ● Laminate WLAN, BT, FM; NFC, GPS modules designing ● Designing of PCB-s for the Automotive modules tests: DC tests (Drop test, Twist test), HTOL test ● Multilayer PCB development (schematic designing, routing, production preparation) ● Layout PCB footprints and symbols library development, according to IPC standard ● Simulation model library development (transistors, ESD protection devices...) ● PCB board development ● AWR Microwave Office automation using Scripting Editor or Visual Studio ● Packages intelligizing using CDS and AutoCAD software ● 3D graphical designing ● 3D printing
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Eagle
    Hardware Design
    Analog Electronics
    Circuit Design
    NFC
    Telecommunications Engineering
    RF Microwave Design
    3D Printing
    Antenna Design
    Amplifiers & Filters
    Multilayer PCB
    Electrical Layout Design
    3D Design
  • $32 hourly
    Hello everyone, we are helping our clients with the realization of their ideas into final products. In our team, we have all the needed specialists: - Technical analytic - Electronics engineers - Hardware developers - Firmware developers - Embedded software developers - AI & ML experts - Mechanical engineers A few years ago we have worked on our own products and launch them in mass production. So we know what is really important for you and can help you avoid common mistakes. Don't hesitate to ask you questions. Looking forward to hearing from you.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Artificial Intelligence
    Embedded System
    Firmware Programming
    Machine Learning
    PCB Design
    Embedded C
  • $40 hourly
    I have 15 years of experience in electronic design from consumer electronics to industrial equipment from an idea stage to mass production
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Embedded System
    Design for Manufacturing
    Software Development
    Hardware Testing
    PCB Design
    Hardware Design
  • $30 hourly
    Over the last 10 years, I have developed a wide range of prototype and mass electronics devices using C/C++,RTOS, Embedded Linux, PCB and enclosure design. Many of the devices have different wireless modules, such as GSM/GPRS, 3G, WiFi, Bluetooth (5.0, 5.2), GPS, Lora and different microcontrollers (STM32, NRF52, PIC32, Atmel, NXP). I also have experience in design electronics devices with embedded Ethernet, POE, RS485, CAN, Web-server and USB interface. Worked with different graphics library for TFT, e-INK, LCD displays.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Circuit Design
    PCB Design
    STM32
    C
    Electronic Design
    C++
    Microcontroller Programming
    Firmware
    Product Design
    Firmware Programming
    Internet of Things
    Electronics
    Embedded C
    Electrical Engineering
  • $64 hourly
    ✅ Top-Rated Upworker - Senior Hardware Engineer, Mass Production Expert, Firmware and Software developer - To Get Your Project Developed From Scratch To Mass Production. With 20+ years experience in electronics engineering designed power, analog and digital electronics, including PCB, embedded and mechanics design. I have served a wide variety of industries and have developed initial concepts and prototype devices as well as producing products that go into full scale production manufacturing. Key Offerings: •Digital circuits design •Power circuits design •Analog, precision and low noise circuits PCB design •Housing and mechanics for electronics •Consulting in electronics •Cost optimization of existing projects •Developing modern analogues of existing devices •Software and firmware development •Server solutions Projects developed by me include: - Compact single board ARM computer/router - Virtual reality suit for medical purposes - Autonomous, solar-powered lamp with controller for DIN-rail - Smart Battery Management System (BMS) - Linux body cam
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Microcontroller Programming
    Solar Energy
    Network Engineering
    Analog Electronics
    Server & Virtualization Software
    Firmware
    Product Development
    Electronic Design
    Electronic Circuit Design
    Mobile App Development
    KiCad
    Internet of Things Solutions Design
    Embedded C
    PCB Design
  • $16 hourly
    Hi, everyone. I have extensive experience in the field of CAD design, mechanical engineering, product design I have strong experience in preparing ready for production design + photorealistic renderings of the finished product My skills are: ✓ crating 3-D design ready for production (heavy industry equipment, consumer electronics, etc.) ✓ shop drawings, BOM of the project ✓industrial design ✓ photorealistic renderings ✓ strength calculations of products Just contact me, and I will always be ready to help you. The software I'm using: ✓ SolidWorks ✓ Unigraphics ✓ AutoCAD Want to discuss your projects? I'm always here to discuss and help you! Thank you so much for being so attentive! Sincerely, truly yours, Andrei T.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Drafting
    Industrial Design
    Automotive
    Product Design
    Technical Translation
    Mechanical Engineering
    CAM Software
    3D Printing
  • $20 hourly
    I am an embedded systems developer with 5 years of industry experience. I have Master's degree in Electrical Systems and focus on the development and practical implementation of hardware and low/high level software. I created a lot of automatic and robotic projects (design, PCB, firmwire, control programs) and made their prototypes. Some of them - autonomous floating station with underwater module, conveyor for dispensing liquids, hexapod manipulator, aquarium electronics. I have experience in the development of printed circuit boards, programming microcontroller systems (AVR,ARM, Raspberry Pi), stepper and servomotors, mechatronics, computer simulation, 3D-design, programming control systems for PC (C,C++), technical documentation. I can provide a full development cycle from drawing and schematic to finished product. This may include manufacturing of electronics, fabrication of the frame, installation, testing of all modules, welding, painting, development and integration of software and preparation of technical documentation. I own such software products: -PCAD/Altium Designer -AVR Studio/WinAVR -Keil uVision -Proteus -Microsoft Visual Studio -MATLAB -AutoCAD -SolidWorks -Windows/Linux.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    PCB Design
    Robotics
    C++
    C
    Raspberry Pi
    Microcontroller Programming
    Embedded System
    3D Design
  • $48 hourly
    I am a seasoned Electronic Engineer specializing in cutting-edge circuit design, embedded systems development, and seamless IoT integration. With a strong foundation in both hardware and firmware, I bring a wealth of experience to deliver innovative solutions that exceed client expectations. My commitment to precision and efficiency is evident in a track record of successful projects across diverse industries. Key Skills: - Circuit Design: Expertise in creating robust analog and digital circuitry for various applications, ensuring optimal performance and reliability. - Embedded Systems: Proficient in developing embedded systems, encompassing microcontroller programming, firmware development, and seamless hardware-software integration. - IoT Integration: Skilled in connecting electronic systems to the Internet of Things, enabling remote monitoring, control, and data exchange for a myriad of applications. - PCB Design: Experienced in crafting custom printed circuit boards using industry-standard tools, with a focus on scalability and manufacturability. - Signal Processing: Knowledgeable in advanced signal processing techniques, vital for achieving superior performance in electronic systems. I am passionate about leveraging my skills to bring your electronic engineering projects to life. If you are seeking a dedicated and experienced professional who delivers high-quality results, let's discuss how we can collaborate to turn your ideas into reality.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Embedded Application
    Firmware
    Firmware Programming
    Electrical Design
    Electronic Circuit Design
    Hardware Design
    Embedded C
    RF Design
    EasyEDA
    KiCad
    Eagle
    Altium Designer
    PCB Design
  • $30 hourly
    I'm a degreed design engineer specialized in electronic packaging & production. Don't be confused with the term "packaging": it refers to enclosures and protective features built into the product itself, and not to shipping containers. My skill is very close to a mechanical design engineer. But an electronic packaging (of a missile flight control system as an example) is a challenging task. In addition to skills in mechanics, it requires some knowledge in many fields, from chemistry to circuit design and programming, as well as a good command in various CAD/CAM systems. I can: • Design injection molded plastic parts, stamped and folded metal sheet parts, CNC-machined parts, machined-and-welded assemblies. • Make a proper layout for your electronic circuit that solves EMC, thermal, and structural integrity issues. • Make some minor changes to your electronic circuit or redesign it on the base of the components' reference designs. • Accurately route PCB, internal cable net, piping and so on. • Provide you with 3D models and CAM files. All information will be treated as confidential and I am willing to sign an NDA on your first demand.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Circuit Design
    Power Electronics
    Eagle
    PCB Design
    Mechatronics
    Altium Designer
    Hardware Design
    SolidWorks
    Multilayer PCB
    Mechanical Engineering
    Mechanical Design
    Electronic Design
    Electrical Engineering
  • $5 hourly
    I have been working for more than 3 Years in the field of PCB designing. I take your idea and transform it into a functioning circuit, delivering design files, prototype PCBs, and detailed BOM.VHDL, C,C++, PCB. I have extensive experience in the areas including PCB design, Embedded System, Analog and Digital Circuit Design, Circuit Simulation, Arduino etc.
    vsuc_fltilesrefresh_TrophyIcon Hardware Prototyping
    Project Management
    Product Design
    SolidWorks
    PCB Design
    Altium Designer
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.