Upwork home
Sign up
Secondary

Hire the best Microcontroller Programmers in Islamabad, PK

Check out Microcontroller Programmers in Islamabad, PK with the skills you need for your next job.
Hire freelancers
Clients rate Microcontroller Programmers
Rating is 4.7 out of 5.
4.7/5
based on 242 client reviews
  • $50 hourly

    • 5.0/5
    • (66 jobs)
    To get top rated services, you need to hire top rated freelancer. With over 17 years of experience in electronics, we strive for success of businesses and products. Masters in the field of High speed PCB design, FPGAs, verilog,VHDL and circuit design, once chosen, We guarantee satisfaction at our end. Our team of engineers have worked on high speed PCBs stuffed with FPGAs, Processors, DDR2/3 interfaces, PHY chips and LVDS Signals all MANUALLY ROUTED. With IBIS models, We can SHOW you a PCB working on computer hence reducing risk of redesign. On FPGAs side, Our engineers have worked on most recent technologies like USB 3.0 Host IP core, DDR3 IP, 8051 IP and hybrid memory cube controller IP to name a few. We look forward to serve you professionally and up to your standards.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    SolidWorks
    Schematic
    Arduino Firmware
    Product Design
    Microcontroller Design
    Verilog
    Digital Electronics
    Xilinx
    Multilayer PCB
    PCB Design
    MATLAB
    OrCAD
    Altium Designer
  • $20 hourly

    • 4.9/5
    • (67 jobs)
    I am Graduate Electronics Engineer. I have +4 Years of experience designing PCB, Hardware Designing, components sourcing and different MCU programming. I can assist you in any of the following areas ✅Complete end-to-end electronic product design from concept to complete prototype. ✅Circuit design, Schematic capture, PCB design. ✅Signal conditioning and instrumentation circuits for different types of sensors. ✅Active/passive filters, 0 -10V, 4-20mA,ADCs, Op-Amps, and Instrumentation Amplifiers. ✅Microcontrollers, Communication protocols like SPI, I2C, UART, RS485, RS232, MODBUS RTU/TCP. ✅SMPS, Power design, DC/DC Converters, and FETs. ✅Power, analog & digital circuit simulation, and power/signal integrity analysis. ✅High-speed mixed signal, EMI, and noise reduction. ✅Selection of components (ICs, Resistors, Capacitors, etc…) and preparing cost-effective BOM (Bill of Materials) for circuits with ratings and standards. ✅Planning and Assembling of PCB, Electrical, and Mechanical parts to finish the module as a final product ✅Testing and Troubleshooting of PCBs with SMDs and Through-hole devices. ✅Designing IoT and Ethernet circuits. ✅Firmware & android APP development by using different programmable languages. ✅Energy monitor systems and medical devices ✅Process Controller Design. ✅Water Treatment transmitters like Ph, temperature, ORP, Conductivity, and TDS. ⭐⭐⭐ Capability Matrix⭐⭐ ⭐ ✅Microcontrollers ⚡Arduino: UNO, MEGA, NANO, DUE ⚡STM32: STM32H7,Stm32F1,STM32F0,STM32F3,STM32F4,STM32F7 ⚡PIC: PIC12,PIC16,PIC18 ⚡ESP: ESP32, ESP8266 ✅PCB Tools ⚡Altium ⚡Eagle ⚡EasyEDA ⚡KiCad ✅Simulation Tools ⚡LTSpice ⚡Proteus ⚡WokWi ⚡TinkerCad ⚡PSpice ⚡Multisim I hope to work with you, to help you complete your project and release your product to the market
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Python
    Electronic Circuit Design
    EasyEDA
    Arduino
    Hardware Prototyping
    PCB Design
    Android App
    ESP32
    ESP8266
    Altium Designer
    Electronics
    Internet of Things
    KiCad
    Analog Electronics
  • $20 hourly

    • 5.0/5
    • (27 jobs)
    🏆Top Rated 🎖5 Star Reviews 💯100% Job Success -------------------------------------------------------------------- Hi, I'm an Embedded Systems Engineer with extensive hands-on experience, specializing in PCB designs, firmware development/ microcontroller programming, circuit layout, prototyping, IoT, simulations, AI, and robotics. If you're searching for someone to bring your ideas to life, you've found the right person. Here's a summary of my services: 🔸️Electrical Circuit Design (Low Noise, Analog, Digital, High Speed) 🔸️Multi-layer and rigid-flex PCB designs (Altium Designer, EasyEDA, KiCAD, and EAGLE) 🔸️ Microcontroller programming/ Firmware Development for ARM-based controllers (STM32, NRF), Esp32, Arduino, AVR, PIC. 🔸️BOM optimization and mass manufacturing 🔸️ Development of embedded systems and rapid prototyping 🔸️ Cloud and IoT-based system development 🔸️ RF and Antenna Design 🔸️ Robot Operating System 🔸️ Dev in NI Lab View 🔸️ Simulation (Simulink, Multisim, and Proteus) Additional services include: 🔹️ 2D/ 3D CAD Model (Solidworks, CREO, Fusion 360) 🔹️ Concept Design 🔹️ Technical Documentation and Tutorials 🔹️ MATLAB 🔹️ Creation of Graphical User Interfaces (GUI) 🔹️ Android/ IOS app development 🎗What truly distinguishes me is my passion and enthusiasm. I maintain open communication with my clients to ensure that the delivered work precisely aligns with their requirements🎗 I am looking forward to the opportunity to collaborate with you. Keywords: Multi-Layer PCB Design, Arduino, Raspberry Pi, Esp32, Altium, EasyEDA, Electrical Designs, Electronics Solutions, Prototype, Circuit Simulation, CAD Model, Enclosure Design, MATLAB, Simulink, Lab View, Robotics, Machine Learning, ROS, AI, RF Design, High-Speed Designs, STM32, NRF Cheers!
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    nRF52832
    STM32
    Altium Designer
    Robot Operating System
    Raspberry Pi
    ARM Cortex-M
    Arduino
    ESP32
    Electronics
    Robotics
    Firmware Programming
    Circuit Design
    Embedded System
    PCB Design
  • $15 hourly

    • 5.0/5
    • (3 jobs)
    Hi, I’m Laiba Qureshi! With over 5 years of experience in software engineering, I specialize in delivering scalable, efficient, and user-friendly digital solutions tailored to meet your business needs. From mobile apps to enterprise-grade web applications, I transform ideas into robust products. 🌐 IoT Dashboard Development Real-Time Data Visualization: Creating interactive dashboards for IoT device data. User Interface Design: Crafting intuitive and user-friendly interfaces. Data Analytics: Implementing analytics for actionable insights. Alerting & Notifications: Monitoring critical parameters with automated notifications. 📱 Mobile & Web App Development Mobile App Development: Skilled in Flutter for Android and iOS. Web Development: Proficient in HTML, CSS, JavaScript, and React. Backend Development: Building robust systems using Node.js. API Integration: Expertise in RESTful APIs for seamless communication. 🖥 Software Engineering Skills Embedded Development: Proficient in C, C++, and Python for embedded systems. Firmware Development: Ensuring efficient hardware-software communication. IoT Protocols: Experience with MQTT, CoAP, and Bluetooth for secure data transmission. Cloud Integration: Proficient in AWS IoT for analytics and control. ⚙ Hardware Engineering Skills Circuit Design & PCB Layout: Designing complex PCBs using Altium Designer, Eagle, and KiCAD. Microcontrollers: Expertise in ESP32, Arduino, Raspberry Pi, and STM. Sensor Integration: Integrating temperature, pressure, and motion sensors for IoT devices. Power Management: Designing energy-efficient, low-power solutions. Prototyping & Testing: Building prototypes and ensuring reliability through rigorous testing. 🛠 Technical Skills Programming Languages: C, C++, Python, JavaScript. PCB Design Tools: Altium Designer, Eagle, KiCAD. Communication Protocols: UART, SPI, I2C, CAN, USB, Ethernet. IoT Protocols: MQTT, CoAP, HTTP, Bluetooth. Cloud Platforms: AWS IoT. Mobile Development: Flutter. Web Development: HTML, CSS, JavaScript, React. Backend Development: Node.js. Version Control: Git. Let’s Connect! Let’s discuss how my skills and experience align with your vision. Feel free to reach out for a detailed discussion or project consultation. Together, we can bring your ideas to life!
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    React
    Flutter
    PCB Design
    AVR Microcontroller
    RFID
    Mobile App
    Raspberry Pi
    Cloud Development
    Desktop Application
    CloudApp
    ESP32
    Firmware
    Internet of Things
    Prototyping
  • $20 hourly

    • 5.0/5
    • (29 jobs)
    Elevate Your Project with a Top-Tier Firmware Developer and Electrical Engineer! Unleash the Full Potential of Your Ideas! Automation | Artistic Animations | Game Development | Robotics | Medical Devices | Monitor and Control | Educational Tools | and more Hardware Experience Controllers: ✔ ESP32, ESP8266 ✔ Raspberry Pi Pico, Arduino, Teensy ✔ Raspberry Pi Sensors: ✔ Proximity sensors (Ultrasonic, Infrared, Capacitive, etc.) ✔ Medical sensors (Heart rate, ECG, etc.) ✔ IMUs (Accelerometer, Gyroscope, Magnetometer) ✔ Power monitoring sensors ✔ Audio sensors (Microphones) ✔ Environmental monitoring sensors (Temperature, Humidity, Gas) ✔ LDRs, FSRs Actuators and Output Devices: ✔ DC, BLDC, and Stepper Motors ✔ Display devices (LED, LCD, TFT, OLED) ✔ Power control devices (AC dimmers, motor drivers, electronic switches) ✔ Speakers Protocols: ✔ Wired: I2C, SPI, OneWire, UART, Ethernet ✔ Wireless: RFID, Wi-Fi, GSM, Bluetooth, BLE, nRF24 Work Areas ✦ Embedded systems development using ESP32, ESP8266, Arduino, Raspberry Pi Pico, and Raspberry Pi ✦ End-to-end medical device prototyping and firmware development ✦ Game development with interactive hardware integration ✦ Expert debugging and performance optimization ✦ Upgrading and enhancing existing projects ✦ Power electronics for electrical systems monitoring and switching Work Environment ✦ Available 24/7 on Upwork for seamless communication ✦ Open to collaboration, welcoming your project ideas and input ✦ Post-project support for updates or modifications ✦ Capable of working independently or within a team What I Offer ➤ Custom-tailored embedded systems projects to meet your specific needs ➤ Hardware recommendations and procurement advice ➤ Detailed simulations with Proteus Design Suite, Tinkercad, WOKWI, or your preferred CAD software ➤ Well-documented firmware for ease of understanding ➤ Comprehensive debugging to ensure flawless performance ➤ Transparent communication and updates throughout the project lifecycle ➤ Continued post-project support for long-term success About Me I am an Electrical Engineer from Islamabad, Pakistan, with a degree in Electrical Engineering and over six years of general programming experience, including 3+ years specializing in embedded systems. My portfolio includes medical devices, multi-sensor integration, motor control (DC, BLDC, Stepper), and interactive game development projects. Let’s turn your vision into reality! Contact me to discuss your project today!
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Arduino IDE
    Wireless Communication
    C
    Electronics
    Arduino
    Raspberry Pi
    Electrical Engineering
    ESP8266
    ESP32
    Embedded System
    Firmware Programming
    C++
    Python
  • $20 hourly

    • 5.0/5
    • (6 jobs)
    Hello, I'm Abdullah Javed, a skilled firmware developer specializing in nRF MCUs and Zephyr RTOS. I also have experience working with Segger Embedded Studio using the nRF5 SDK for bare-metal programming. I offer comprehensive firmware development services tailored to a range of MCU models, including: nRF52832, nRF52840, nRF5340, nRF51822 nRF9160, nRF9161 nRF7002 ESP32 Services Offered: Bluetooth Low Energy (BLE) Development: Expertise in creating robust BLE applications for a variety of use cases. Custom Sensor and Display Library Development: Development of libraries for sensors and displays using communication protocols such as I2C, SPI, and UART. Network Connectivity Solutions: Experience with NB-IoT, LTE, and WiFi integration to ensure seamless connectivity. LoRa Module Integration: Skilled in integrating LoRa modules such as SX1276, SX1278, and SX1280 for long-range communication. Over-The-Air (OTA) Updates: Implementation of OTA updates over WiFi and BLE to ensure devices are always up-to-date. Cloud Integration: Connecting your devices to cloud servers like AWS, Azure, ThingsBoard, and nRF Cloud for remote management and data analytics. Why Choose Me? Quality-Driven: I am committed to delivering high-quality firmware that meets and exceeds your expectations. Client-Centric Approach: Your satisfaction is my top priority. I work closely with you to understand your needs and provide tailored solutions. Unlimited Revisions: I offer unlimited revisions to ensure the final product perfectly aligns with your requirements. I look forward to collaborating with you on your next project!
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    FreeRTOS
    ESP32
    Firmware Programming
    Internet of Things
    C++
    ARM Cortex-M
    Zephyr
    nRF52
    C
  • $22 hourly

    • 4.5/5
    • (26 jobs)
    Product Development Services Under One Roof Our company offers comprehensive product development services all in one convenient location. Our team of experienced professionals is dedicated to providing top-quality services to our clients. We specialize in every aspect of the product development process, from ideation to design, prototyping, testing, and manufacturing. Our state-of-the-art facilities and cutting-edge technology enable us to deliver innovative solutions that meet the unique needs of our clients. We pride ourselves on our ability to deliver projects on time and within budget, while maintaining the highest standards of quality. Trust us to bring your product ideas to life with our end-to-end product development services.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Hardware Prototyping
    Wireless Communication
    Analog Electronics
    Sensor
    Android App Development
    3D Design
    Circuit Design
    Embedded C
    Raspberry Pi
    PCB Design
    Multilayer PCB
    Internet of Things Solutions Design
    Arduino
  • $40 hourly

    • 4.3/5
    • (5 jobs)
    I’m an Electrical Engineer with experience in the design of Power Electronics applications particularly in the development of Resonant Converters for Induction Heating based applications. Whether you’re struggling with any Electrical System Design, implementing a traditional control, or an AI-based monitor – I can help! 1. I’m experienced in MATLAB, Proteus, Microcontrollers, and PLCs. 2. I’ll fully project manage your brief from start to finish 3. Regular communication is really important to me, so let’s keep in touch!
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Altium Designer
    PCB Design
    Technical Writing
    Circuit Design
    Analog Circuit
    Electrical Engineering
    PLC Programming
    Python
    Control Engineering
    Arduino
    Proteus Design Suite
    MATLAB
    Power Electronics
    Semiconductor
  • $27 hourly

    • 5.0/5
    • (2 jobs)
    With over 16 years of experience in Embedded Systems, I specialize in IoT device hardware and PCB design, delivering robust and efficient solutions tailored to modern connectivity requirements. My expertise lies in designing, developing, and troubleshooting circuits for IoT applications, ensuring high reliability and seamless integration of components. I have extensive experience creating multi-layer PCBs for IoT devices, optimizing signal integrity, power distribution, and thermal management. My designs incorporate advanced communication protocols like BLE, Wi-Fi, and UART, essential for IoT ecosystems. I am proficient in using industry-standard tools, including KiCad, Altium Designer, and EasyEDA, for schematic design and PCB layout. From concept to production, I have developed IoT hardware that meets stringent performance and quality standards. I ensure that all designs are optimized for manufacturability, scalability, and compliance with industry regulations. My deep understanding of microcontrollers, including AVR (ATtiny and ATmega series) and NXP ARM (MKE series), allows me to seamlessly integrate hardware and firmware for complete IoT solutions. Tools I frequently use: - Schematic and PCB Layout: KiCad, Altium Designer, EasyEDA - Microcontroller Development Environments: ImageCraft Compiler, IAR ARM Workbench, AVR Studio, Arduino I am passionate about delivering innovative, high-performance hardware solutions that power next-generation IoT devices.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Embedded System
    PCB Design
    Arduino
    Embedded C
  • $30 hourly

    • 5.0/5
    • (51 jobs)
    After completing my MS in Electrical Engineering from Linkoping University Sweden, I started my PhD in field of Medical Image processing from COMSATS University Islamabad. The research involved the exploration of inverse problems for MR image reconstruction (Publication: Singular Value Decomposition Using Jacobi Algorithm in pMRI and CS). I also worked on the acceleration of Image Reconstruction algorithms using Graphics Processing Units (Publication: Optimizing Image Reconstruction in SENSE Using GPU). I used C++ and CUDA architecture to exploit the parallelism in MRI reconstruction algorithms. I had also worked (In Linkoping University with Dr. J. Jacob Wikner during my PhD from April – September 2017) on designing a Chip for the proposed algorithm for real time image reconstruction on MRI scanners (Publication: ASIC Model of SENSE to Accelerate MR Image Reconstruction). The publication was in lime light among researchers from different countries at Joint Annual Meeting of ISMRM and ESMRMB, organized in June 2018 in Paris France. During my PhD, I also learnt about the process of data generation from within the tissues. I have also studied and understood how the protons within the tissue are excited to generate required signals for image acquisition. The understanding of the data generation principles helped me a lot to understand and develop the reconstruction algorithms efficiently and to perform real time reconstruction of MR images. I worked on different MR acquisition principles where the data was acquired from multichannel receiver coils. The algorithms, involved in my research, are capable of incorporating the sensitivity maps which are acquired from multichannel receiver coils to get artifact free images. I worked on different algorithms which include SENSE (an image domain-based reconstruction algorithm to get artifact free image from multichannel data), GRAPP (a k-space based reconstruction method to reconstruct multichannel undersampled data without the need to sensitivity maps) and Compressed Sensing (which is an iterative approach to get reconstructed images). I have worked on an advanced algorithm of Compressed Sensing (known as L+S Decomposition Model) where we separate the heart structure and blood flowing within the heart. It is a time domain approach as it separates this information present in different frames. All the algorithms mentioned here are very time-consuming processes. So, to overcome this issue, I designed parallel architecture of all these models which is executed on GPUs (using multiple cores). The results achieved from GPUs are significantly improved in terms of reconstruction time, but still we have issues with limited memory available for computation on GPUs. So, after completing my PhD in September 2018, I started exploring application of deep learning for bio-medical image processing. I have studies about the different platforms which could be used for deep learning (using tensor-flow). There are different networks which include U-Net and variational networks, which are to be used for biomedical imaging. Until know (after reading about deep learning in medical image processing) I can safely say that deep learning seems to be the future of medical imaging. Moreover, I have been involved in hardware work on Raspberry pi and microcontrollers. I have been involved in robot competitions as well. I am also involved in PLC and SCADA work. We have been working in industry for past 8 year. We have worked on PLCs in Engro Fertilizers, Cigarette Companies, Pharmaceuticals etc.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Microcontroller Design
    Raspberry Pi
    Report Writing
    PLC Programming
    Medical Imaging
    Image Editing
    FPGA
    Image Processing
    Python
  • $20 hourly

    • 4.7/5
    • (7 jobs)
    I am certified LabVIEW developer with four to five years of industry experience in embedded system application development and design. I have hands on expertise in NI C-rio,MyRio,, FPGA,PXI and DAQ hardware. I have done multiple projects on Arduino, LabVIEW Crio, PIC18 and PIC32, atmega and NI myRio controllers.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Circuit Design
    Electronic Circuit Design
    LabVIEW
    NI Multisim
    PIC Programming
    MATLAB
    Embedded System
    Embedded C
    FPGA
    Arduino Firmware
    STM32
    Python
    C++
    C#
  • $25 hourly

    • 4.6/5
    • (17 jobs)
    Experience Industrial Embedded Software and Hardware Engineer. I worked a lot on projects at the industry level in my three years of experience. Recently on the way to pursuing full-time freelancing at Upwork Core Application I worked on: -IOT -Bluetooth, Xbee, Lora, SIgfox, Wifi, GSM, and other RF modules. -FPGA -Inverter/ Converters/ VMS/ TA. - STM/ Atmega/PIC18F Software Hardware. -Power Supplies - USB drivers and PCB boards. -ESP32 - Raspberry pi Embedded Firmware: -Bare Metal Embedded Firmware Development. -Arduino/ STM/ ESP/ PIC and Various MCU Firmware. -Python, AI with Embedded Hardware. -PYQT, GUI for Embedded prototyping. Services: -PCB Design and Layout. -Firmware Development. -GUI for Embedded products. -Cost-effective boards consultation and design -Mass production management -Enclosure design for Custom boards Best Regards, Ahad.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Verilog
    Electronic Circuit Design
    STM32
    LoRa
    SystemVerilog
    Internet of Things
    Computer Hardware Design
    Altium Designer
    FPGA
    Raspberry Pi Firmware
    Internet of Things Solutions Design
    PCB Design
    Embedded System
    Firmware Programming
    Embedded C
    Digital Design
  • $12 hourly

    • 5.0/5
    • (2 jobs)
    An Electrical Engineer specialized in Electronics. I am working in the R & D Firm as a Senior Design Engineer. I have more than three years of professional experience working on various Research and Development projects, related to Embedded systems design, PCB Designing, Circuit designing, Schematics, Prototype development, DFM Services, this includes Hardware and Software Development of the products. My Areas of Expertise are: 1. Designing of Embedded Solutions and complete development of prototypes 2. Software & Hardware Development of products. 3. Schematic Design, PCB Design, and Manufacturing. 4. Designing Battery based Low Power Solutions 5. LED lighting solutions. 6. Wearable and Medical Devices. 7. PCB Troubleshooting 8. Procurement, Component Sourcing & BOM. 9. Circuit Simulation and Detailed Analysis Language & Development Platforms: I have worked on various programming languages, development environments & tools 1) Arduino (ATmega328-P, ATmega-2560, ATmega32U4, AT-tiny85), 2) PIC microcontrollers (PIC32MX,PIC10F) , MPLAB, MiKro C Pro 3) KEIL, IAR , STM32CUBE , STM32, STM8, STM32MP 4) Model Sim, Verilog HDL, and Xilinx 5) Altium, Easy EDA, Proteus , LT Spice. Embedded Communication Protocols: I2C, SPI, UART, Wireless Communications (Bluetooth, BLE, Wi-Fi, RF, RFID, IR) Hardware 1) SMD Components Soldering 2) Signal Analysis using Oscilloscope 3) PCB Reviewing 4) Circuit Debugging 5) Circuit Design on Strip Boards. 6) Development of prototypes. Management 1) Time Management 2) Good Communication Skills 3) Component Sourcing, Getting PCB Quotations 4) Project Management 5) Procurement.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Arduino Firmware
    Internet of Things
    PCB Design
    ESP32
    GSM
    Electronics
    STM32
    Altium Designer
    Hardware Design
    Firmware Programming
    Multilayer PCB
    LoRa
    PIC Programming
    Electronic Circuit Design
    C++
    Embedded System
    Rapid Prototyping
    Product Design
  • $25 hourly

    • 5.0/5
    • (10 jobs)
    Hello! I am an embedded systems engineer with over 3 years of experience in designing, developing, and integrating complex embedded systems and IoT solutions. Specializing in END-TO-END PRODUCT DEVELOPMENT, my expertise spans from hardware-level development to web and mobile applications, ensuring a comprehensive approach to your project needs. Key Skills: ✔️ Programming Languages: C, C++, Embedded C, Rust, Embedded Rust, Python ✔️ Embedded Systems / IoT: ARM, AVR, ESP32, STM32, UART, SPI, I2C, CAN, BLE, Wi-Fi, Zigbee, LoRa, MQTT, HTTP, Modbus, RTOS, FreeRTOS, Firmware Development, Embedded Software, Embedded Linux, Yocto Project, Robot Control ✔️ Additional Skills: Git, SVN, CI/CD, Docker, GCP, AWS, PCB Design (Altium Designer), IIoT, RESTful APIs, Network Programming, Cross-compilation, Cybersecurity, Automation Scripts, Hardware Drivers, Tracking and Identification, Chromium and CEF, Robotics Services Offered: 🚀 Embedded Linux and RTOS Development 🚀 Firmware Development and Optimization 🚀 Hardware and PCB Design 🚀 IoT Solutions Development (6LowPAN, ZigBee, Z-Wave, Bluetooth, Sigfox, LoRa) 🚀 Cross-Compilation and Cybersecurity Implementation 🚀 Automation Scripts and Hardware Drivers 🚀 Web and Mobile Application Development for Embedded Systems 🚀 Robotics and Automation Solutions Project Highlights: 🔧 Monitoring Systems for Co-working Spaces: Developed using ESP32, PoE, and UWB technologies, achieving 95% accuracy in indoor localization. 🔧 Automated Marketing Caller Systems: Integrated Generative AI to increase marketing outreach efficiency by 40% and customer engagement by 25%. 🔧 One-Click ESP32 Flasher Tool: Reduced flashing time by 50%. 🔧 Access Control Systems: Enhanced security, reliability, and robustness by 30%, integrating Fingerprint Sensor, BLE, and RFID technologies. 🔧 Charging Station Firmware: Developed for 28 Li-ion batteries, improving monitoring and control by 25% using INA226 sensors, CAN communication, HTTP for updates, and MQTT for data posting. 🔧 Chess Playing Robotic Arm: Achieved a 90 Hello! I am an embedded systems engineer with over 3 years of experience in designing, developing, and integrating complex embedded systems and IoT solutions. Specializing in end-to-end product development, my expertise spans from hardware-level development to web and mobile applications, ensuring a comprehensive approach to your project needs. Key Skills: ✔️ Programming Languages: C, C++, Embedded C, Rust, Embedded Rust, Python ✔️ Embedded Systems / IoT: ARM, AVR, ESP32, STM32, UART, SPI, I2C, CAN, BLE, Wi-Fi, Zigbee, LoRa, MQTT, HTTP, Modbus, RTOS, FreeRTOS, Firmware Development, Embedded Software, Embedded Linux, Yocto Project, Robot Control ✔️ Additional Skills: Git, SVN, CI/CD, Docker, GCP, AWS, PCB Design (Altium Designer), IIoT, RESTful APIs, Network Programming, Cross-compilation, Cybersecurity, Automation Scripts, Hardware Drivers, Tracking and Identification, Chromium and CEF, Robotics Services Offered: 🚀 Embedded Linux and RTOS Development 🚀 Firmware Development and Optimization 🚀 Hardware and PCB Design 🚀 IoT Solutions Development (6LowPAN, ZigBee, Z-Wave, Bluetooth, Sigfox, LoRa) 🚀 Cross-Compilation and Cybersecurity Implementation 🚀 Automation Scripts and Hardware Drivers 🚀 Web and Mobile Application Development for Embedded Systems 🚀 Robotics and Automation Solutions Project Highlights: 🔧 Monitoring Systems for Co-working Spaces: Developed using ESP32, PoE, and UWB technologies, achieving 95% accuracy in indoor localization. 🔧 Automated Marketing Caller Systems: Integrated Generative AI to increase marketing outreach efficiency by 40% and customer engagement by 25%. 🔧 One-Click ESP32 Flasher Tool: Reduced flashing time by 50%. 🔧 Access Control Systems: Enhanced security, reliability, and robustness by 30%, integrating Fingerprint Sensor, BLE, and RFID technologies. 🔧 Charging Station Firmware: Developed for 28 Li-ion batteries, improving monitoring and control by 25% using INA226 sensors, CAN communication, HTTP for updates, and MQTT for data posting. 🔧 Chess Playing Robotic Arm: Achieved a 90% accuracy rate in move execution with strategic algorithm implementation. 🔧 IoT Core Library for ESP32: Demonstrated IoT expertise, improving system integration by 25%. Achievements: 🏆 Best Mechanical Design Award in National Engineering and Robotics Contest 2022 🏆 Over 30 Completed Projects in Embedded Systems and IoT Solutions Why Choose Me: 🌟 Holistic Knowledge: From hardware design to web and mobile application development, ensuring a seamless integration of all components. 🌟 Proven Track Record: Successfully led projects from conception to completion, optimizing functionality and enhancing efficiency. 🌟 Client Satisfaction: My priority is to deliver quality work on time and within budget, fostering long-term relationships. Let’s Collaborate: Trusting me with your project means getting the job done fast and prop
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Altium Designer
    PCB Design
    ESP32
    STM32
    Internet of Things Solutions Design
    Embedded System
    Arduino
    Electronic Design
    Internet of Things
    Raspberry Pi
    Electrical Engineering
    Circuit Design
  • $15 hourly

    • 4.7/5
    • (7 jobs)
    I am a design engineer with experience in FPGA & Microcontroller related projects for small and medium-sized businesses. I’m experienced in different FPGA boards and microcontrollers, MATLAB, C, C++, Verilog I’ll fully project manage your brief from start to finish Regular communication is really important to me, so let’s keep in touch!”
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Deep Learning
    Electronic Circuit Design
    C
    VHDL
    Microsoft Visual C++
    Verilog
    Python Script
    SystemVerilog
    Mathematics Tutoring
    MATLAB Script
    PIC Programming
    MATLAB
    FPGA
  • $20 hourly

    • 5.0/5
    • (3 jobs)
    ✔ 5+ years ✔ Satisfied clients ✔ Expert Embedded Engineer A seasoned Embedded Systems and Software Engineer with 𝟓+ years of professional experience in 𝐈𝐎𝐓, 𝐑𝐨𝐛𝐨𝐭𝐢𝐜𝐬, 𝐏𝐨𝐰𝐞𝐫 𝐄𝐥𝐞𝐜𝐭𝐫𝐨𝐧𝐢𝐜𝐬, 𝐈𝐧𝐝𝐮𝐬𝐭𝐫𝐢𝐚𝐥 𝐚𝐮𝐭𝐨𝐦𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐭𝐡𝐞 𝐀𝐮𝐭𝐨𝐦𝐨𝐭𝐢𝐯𝐞 𝐢𝐧𝐝𝐮𝐬𝐭𝐫𝐲. My expertise lies in crafting innovative embedded systems solutions, seamlessly integrating hardware and software, and turning ideas into full fledged practical products. I am passionate about this field of science, which has lead me to pursue a formal degree in Mechatronics Engineering. The work I have done engulfs the whole spectrum from project design and software architecture to software development and hardware integration and then to a prototype and manufacturing. ==========𝐒𝐞𝐫𝐯𝐢𝐜𝐞 𝐇𝐢𝐠𝐡𝐥𝐢𝐠𝐡𝐭𝐬=========== - 𝐄𝐦𝐛𝐞𝐝𝐝𝐞𝐝 𝐒𝐲𝐬𝐭𝐞𝐦𝐬: Tailored solutions for diverse applications and firmware for microcontrollers (𝗔𝗥𝗠, 𝗦𝗧𝗠, 𝗡𝗫𝗣, 𝗘𝗦𝗣𝟯𝟮, 𝐀𝐕𝐑), 𝗥𝗮𝘀𝗽𝗯𝗲𝗿𝗿𝘆 𝗣𝗶, 𝗔𝗿𝗱𝘂𝗶𝗻𝗼, and custom boards to name a few. (you can look for details in firmware development profile section) - 𝐇𝐚𝐫𝐝𝐰𝐚𝐫𝐞: Designing and optimizing circuits to get schematics, PCB layouts, BOM files etc. and fabricating an electronic circuit for microcontrollers and peripheral circuitry; or any custom circuit you want. (you can look for details in electronics profile section) - 𝐒𝐨𝐟𝐭𝐰𝐚𝐫𝐞: GUI development, scripting, automation, data parsing, and web scraping in 𝐩𝐲𝐭𝐡𝐨𝐧, 𝐂, 𝐂++, 𝐂# 𝐞𝐭𝐜. using a multitude of libraries and software development environments. I am a quick learner, and unfazed by any unfamiliar situation or technology. So if you need help with your problem in the embedded systems, hardware and software domain, please don't hesitate to get in touch. 𝐋𝐞𝐭'𝐬 𝐝𝐢𝐬𝐜𝐮𝐬𝐬 𝐡𝐨𝐰 𝐈 𝐜𝐚𝐧 𝐜𝐨𝐧𝐭𝐫𝐢𝐛𝐮𝐭𝐞 𝐭𝐨 𝐲𝐨𝐮𝐫 𝐩𝐫𝐨𝐣𝐞𝐜𝐭'𝐬 𝐬𝐮𝐜𝐜𝐞𝐬𝐬. 𝐑𝐞𝐚𝐜𝐡 𝐨𝐮𝐭, 𝐚𝐧𝐝 𝐥𝐞𝐭'𝐬 𝐠𝐞𝐭 𝐬𝐭𝐚𝐫𝐭𝐞𝐝 !
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Prototype Design
    Schematic Capture
    ARM Cortex-M
    Internet of Things Solutions Design
    Driver Development
    FreeRTOS
    Firmware Programming
    Python
    C++
    Arduino
    STM32
    C
    ESP32
    Embedded System
  • $12 hourly

    • 5.0/5
    • (6 jobs)
    AI Developer | Full-Stack Web Engineer | LLM & Computer Vision Expert !!!Free consultation. My first client will get lowest rates for projects!!! I am an experienced AI developer and full-stack engineer with over 5 years of expertise in building cutting-edge web applications, large language models (LLMs), and computer vision systems. I specialize in delivering scalable, dynamic, and responsive solutions using Django, Python, and GPT-Neo models. Key Skills: LLM Integration (GPT-Neo, GPT-J) Computer Vision (YOLOv8, OpenCV) Web Development (Django, REST APIs, Firebase) Ecommerce Development (Dynamic UI, Google OAuth, Payment Gateways) Cloud Deployment (AWS, Firebase) Recent Projects: 📈 Built predictive stock models achieving 71% better returns for investment firms 📈 Early Time Series Models saving 30-50% training time. 🤖 Developed a chatbot for LinkedIn that dynamically answers questions using GPT-Neo 🎥 Created video processing pipelines using FFmpeg and ImageMagick for dynamic scaling and overlays 📊 Built a Django-based ecommerce catalog with seamless admin panels and mobile-first design I am passionate about leveraging AI and web technologies to solve complex problems and create intuitive user experiences. Let’s collaborate to bring your ideas to life! DETAILED OVERVIEW: Technical Proficiencies: Backend Development: Django, Flask, FastAPI, Node.js Frontend Technologies: React, Vue.js, Bootstrap, Tailwind CSS Database Management: MySQL, PostgreSQL, MongoDB, Firebase Realtime Database AI/ML Frameworks: TensorFlow, PyTorch, Hugging Face, Transformers Computer Vision: Image segmentation, object detection, RTSP video streaming integration DevOps: Docker, Kubernetes, Nginx, CI/CD Pipelines, GitHub Actions Cloud Platforms: AWS (EC2, Lambda, S3), Google Cloud, Azure APIs & Integrations: RESTful APIs, GraphQL, Stripe, PayPal, Twilio Notable Accomplishments: AI Chatbot Development: Built and deployed a sales chatbot for ecommerce platforms, automating FAQs and customer interactions, boosting engagement by 40%. Security & Encryption: Designed encryption protocols for microcontroller-based projects, preventing code duplication and enhancing system integrity. Big Data Analytics: Developed data pipelines for large datasets, supporting predictive analytics and visualization using Tableau, Pandas, and NumPy. Event Management System: Created an ERD and full-stack solution with booking, availability checks, and user management, ensuring smooth event coordination. Video Processing: Engineered dynamic video overlay and scaling solutions, used for promotional videos and social media marketing campaigns. Client-Centered Approach: I prioritize clear communication, timely delivery, and scalable solutions tailored to each client's unique requirements. Whether you need a complex AI model or a sleek ecommerce platform, I ensure seamless collaboration and transparency throughout the project lifecycle. Why Hire Me? Proven track record of delivering high-quality solutions under tight deadlines Strong problem-solving mindset and a passion for innovative technologies Dedicated to continuous learning and staying ahead of tech trends Let’s Collaborate: I'm excited to contribute to projects that challenge the norm and drive technological advancement. Feel free to reach out to discuss your vision – together, we can turn ideas into impactful digital products.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    HTML
    CSS
    Django
    Bot Development
    Artificial Intelligence
    Embedded System
    MQTT
    Home Automation
    Python
    WiFi
    Arduino
    Raspberry Pi
    C++
  • $20 hourly

    • 5.0/5
    • (11 jobs)
    Hello, my name is ShahidUllah Jan and I am an experienced electronics engineer with a unique set of skills. I specialize in embedded system design, IoT product development, PCB design, and Android app development. What sets me apart from other freelancers in my field is my ability to connect IoT products to websites and Android apps, providing a seamless and user-friendly experience for my clients. Over the past five years, I have worked on a variety of projects in the IoT industry. I have designed and developed IoT products for home automation, smart agriculture, and industrial automation, and have successfully integrated these products with websites and Android apps. I have also designed multilayer PCBs using Altium Designer, and have experience in firmware development and software integration. My unique speciality lies in my ability to provide end-to-end solutions for my clients, from hardware design to firmware development and software integration. Whether you need an IoT product designed from scratch, or need to integrate an existing product with a website or Android app, I have the skills and experience to deliver high-quality work that meets your needs. If you are looking for a reliable and experienced freelance engineer to help with your IoT project, please feel free to contact me. I would be happy to discuss your project requirements and provide a customized solution that meets your needs.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Digital Electronics
    Analog Circuit
    Proteus Design Suite
    Circuit Design
    Flutter
    Kotlin
    Java
    Android App
    Altium Designer
    Internet of Things
    Multilayer PCB
    Visual Basic
    Arduino
    ESP32
    C#
    Windows App Development
    PCB Design
    ESP8266
  • $25 hourly

    • 5.0/5
    • (7 jobs)
    PROFILE SUMMARY * Research interest and expertise in ASIC/VLSI Design. * Proficiency in design and development of FPGA -based systems. * Eight years of work experience in Research & Development and Academia. * Hands on experience in industrial tools of Mentor Graphics and Cadence. * Familiar with the complete IC design flow using open-source tools. * Proficient in C++ and Verilog-HDL . Familiar with VHDL and System Verilog. * Skilled in RTL Design. Also familiar with the design verification concepts like UVM. * An experienced team leader and skilful team player with persuasive leadership, communication, and interpersonal skills. DETAILS: I have a Master's and Bachelor's Degree in Electrical Engineering with a specialization in Electronics. I have 10 years of work experience in project development, research, and academia. I am also the founder and CEO of two startups including PowerSavers and DockForms.. I can provide assistance in the following domains. ⭐ Technical ⭐ → Programming for Arduino, Microcontroller, RaspberryPi, Jetson, FPGA → Complete Embedded and Digital System Design → Circuit Diagram, simulation, and PCB Design. ⭐ Non-Technical ⭐ → Project design document, report, presentation, and evaluation. → Statement of purpose, research proposal, and motivation letter. → CV, resume, and cover letter. → Blog posts with SEO. → Business plan, funding forecast, investors brief. → Pitch Deck → Social media handling and marketing ֎List of skills֎ → Configuration of multiple sensors including Ultrasonic, IR, Pressure, Temperature, Humidity, Flow, Level, and Tachometer. Familiar with installation and working of fire, smoke, and gas alarms. Also worked on PIR and RFID. → Expertise in PIC and Arduino. Also worked on Raspberry pi, ZigBee, RTOS, and TinyML. → C/C++ Verilog, VHDL, Python. → ModelSim, Xilinx ISE, Xilinx VIVADO → Leonardo Spectrum, Pyxis Schematic, Pyxis Layout, Eldo, Calibre, Cadence Virtuoso. → XSCHEM, Ngspice, Magic VLSI, Netgen, Openlane → MATLAB, MS Visio, Express PCB, PSpice, MultiSim, Proteus, MikroC, MPLAB. → SM/GPS, Bluetooth, Wi-Fi, HC-12, RS-232, SPI, I2C, USB. →LaTex, MS Office, Zotero, EndNote. ֎List of completed projects֎ →Low-Cost Egg Incubator for Multiple Birds. →Bluetooth, RF, and IoT-based home automation solutions →Wireless Smoke Alarm System. →RFID and Wi-Fi-based single door lock system. →RFID-based centralized door lock system for five doors. →Brain-controlled wheelchair. →Human following robot using Raspberry Pi. →Collision avoiding and ball potting robot. →6 DoF Pick and Place Robotic Arm →Adaptive cruise control implementation on robots. →Driver assistance system →Black Box for vehicles →The fleet management system of consumer vehicles. →GSM-based Energy Meter.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    FPGA
    GSM
    Arduino
    C++
    Content Writing
    Home Automation
    Verilog
    C
    Embedded System
    Electronic Circuit Design
    Elevator Pitch
    Digital Electronics
    Presentations
    Electrical Engineering
  • $25 hourly

    • 5.0/5
    • (4 jobs)
    Expertise in Machine Learning, AI, Computer Vision, Azure Cloud, Web Development and DevOps My core expertise lies in the domains of Computer Vision and Generative AI, enriched by a solid background in Machine Learning and fine-tuning AI models. My skills extend to web development using technologies like FastAPI and the MERN stack, and I'm experienced in setting up efficient workflows with DevOps practices, including CI/CD pipelines. I've applied my expertise in projects ranging from enhancing web applications to deploying AI and ML models on cloud environments, specifically on Google Cloud Platform and Microsoft Azure. My skill set is comprehensive, covering the entire spectrum from model training to deployment, ensuring optimal performance and real-time execution across diverse platforms. Generative AI: I am deeply engaged with cutting-edge Generative AI technologies, having worked with advanced methods like SDXL-TURBO, LCM Diffusion, and Text2video, among others. My proficiency extends to employing Generative AI tools and APIs, such as ComfyUI, Automatic A111, and leveraging Huggingface Diffusers for diverse applications. My experience includes deploying Large Language Models (LLMs) and Vision-Language Models (VLMs), notably CogVLM and Qwen, optimizing them for efficiency on platforms like Linux using TensorRT-LLM. This optimization is particularly effective in applications like stable diffusion for image captioning. Additionally, I've applied Generative AI in creative contexts, utilizing tools like InstantID and Inpaint Adapter for innovative tasks like face swapping and artistic creation. Machine Learning: I specialize in Machine Learning and AI, particularly in developing algorithms for Computer Vision and Generative AI. My work involves fine-tuning AI models to enhance their performance and applying these models to practical applications Web Development: My experience in web development encompasses using the MERN stack (MongoDB, Express.js, React, Node.js) and Fast-API, creating scalable and efficient web applications. I focus on building user-friendly interfaces and ensuring backend efficiency, making the web applications both robust and responsive. Azure Cloud: In the Azure Cloud platform, I have deployed and managed AI models, leveraging Azure's capabilities for high availability and scalability. My work includes setting up and maintaining cloud infrastructure, which allows for the seamless deployment of AI-driven applications and services. DevOps Practices: I'm proficient in DevOps practices, emphasizing continuous integration and continuous delivery (CI/CD) pipelines. My approach ensures that software updates are released reliably and efficiently, improving the development cycle and overall productivity. This includes automating workflows and using microservices architecture to achieve scalability and resilience in applications.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Microcontroller Design
    Simulink
    FastAPI
    MERN Stack
    Azure OpenAI Service
    Azure Machine Learning
    Azure DevOps
    Machine Learning
    PyTorch
    Python Script
    Embedded C
    C++
  • $15 hourly

    • 5.0/5
    • (1 job)
    👋 Hi there! I'm an experienced electrical engineer with expertise in MATLAB and Arduino Programming, Digital and Analog Circuits Designing, and PCB Designing. I have a strong background in the field, with a Bachelor's degree in Electrical Engineering. 🔌 𝐌𝐘 𝐒𝐊𝐈𝐋𝐋𝐒 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐒: ✔ Arduino Programming I can design and program Arduino-based systems for various applications, including sensor interfacing, data acquisition, and control systems. ✔ MATLAB Programming: I have extensive experience in MATLAB programming for data analysis, signal processing, control systems, and simulation. ✔ Digital and Analog Circuits Designing: I can design analog and digital circuits for various applications, including power supplies, amplifiers, filters, and microcontroller-based systems. ✔ PCB Designing: I have expertise in PCB designing software such as Altium Designer, Eagle PCB, KiCAD, EasyEDA, and Proteus Design Suite and can design high-quality PCB layouts for various applications. 👨‍💼 𝐈𝐧 𝐦𝐲 𝐩𝐫𝐞𝐯𝐢𝐨𝐮𝐬 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬, 𝐈 𝐡𝐚𝐯𝐞 𝐰𝐨𝐫𝐤𝐞𝐝 𝐨𝐧: ▪ Designing and implementing a sensor network for environmental monitoring using Arduino. ▪ Developing control algorithms for a robotic arm using MATLAB and Simulink. ▪ Designing and implementing filters using MATLAB and Simulink. ▪ Designing and testing Digital and Analog Circuits for power supplies, amplifiers, and filters. ▪ Designing and optimizing PCB Layouts for various applications, including RF communication systems and power electronics. 🤝 I'm passionate about using my skills and expertise to help clients achieve their goals. I'm committed to delivering high-quality work that meets or exceeds their expectations, and I'm always open to feedback and suggestions for improvement. 📩 If you're looking for an 𝐞𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞𝐝 𝐞𝐥𝐞𝐜𝐭𝐫𝐢𝐜𝐚𝐥 𝐞𝐧𝐠𝐢𝐧𝐞𝐞𝐫 for your project, feel free to contact me. I'm available for both 𝐬𝐡𝐨𝐫𝐭-𝐭𝐞𝐫𝐦 𝐚𝐧𝐝 𝐥𝐨𝐧𝐠-𝐭𝐞𝐫𝐦 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬, and I'm always excited to take on new challenges and learn new things.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Reverse Engineering
    Robotics
    Electronic Design
    PCB Design
    MATLAB
    ESP32
    Embedded C
    Altium Designer
    Arduino Firmware
    Arduino IDE
    Eagle
    Circuit Design
    Arduino
    Electrical Engineering
  • $20 hourly

    • 5.0/5
    • (1 job)
    As an experienced professional, I specialize in the following areas: ✅3D Modelling/Designs Proficient in creating 3D models and designs using industry-standard software (CREO/SolidWorks/Autodesk Inventor & Fusion 360) Experienced in product design and prototyping for various industries. ✅ IoT Development Proficient in developing IoT solutions and integrating various hardware components Skilled in working with microcontrollers such as Arduino series, Raspberry Pi, ✅ESP32, STM32, ESP8266 etc Expertise in IoT protocols such as MQTT, BLE, HTTP, Zigbee ✅Cross-Platform App Development Experience in cross-platform app development frameworks Flutter Skilled in integrating IoT functionalities into mobile apps for remote control and monitoring
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    3Design
    CAD
    3D Model
    Flutter
    Firebase
    Node.js
    Software Development
    GUI Design
    Desktop Application
    ESP8266
    STM32F4
    STM32
    ESP32
    Arduino
  • $10 hourly

    • 5.0/5
    • (7 jobs)
    Hi! Thank you for visiting my profile. As a CAD designer my services include: -2D/3D Computer Aided Engineering Designing ( CAD ) and rendering of mechanical drawings and models. -Schematics re-drawing, Circuit Designing and Simulations. -Arduino microcontrollers programming. I also offer my services as a data entry specialist as I have great attention to detail, fast project turnaround, good adaptability to new software, computer proficieny and great communication skills. Software I use: -AutoCAD -Solidworks -FreeCAD -Blender -ANSYS -Proteus -Arduino IDE -Draw.io -Microsoft Office Suite I can: -Provide you with DWG , STL , DXF , STEP files for editing in other software or for CNC purposes. -Source files for your schematics and simulations -Codes and simulation source files for your AVR projects. I have a 100% job success score based on the reviews from my pervious clients. I take every project as a challenge and assure you that I will complete your project to your satisfaction in a friendly and professional manner. I am dedicated to delivering high-quality work, meeting deadlines, and exceeding expectations with a positive attitude. Looking forward to working with you. Best regards Taha Athar.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Microsoft Excel
    Microsoft Word
    Data Entry
    Draw.io
    Arduino IDE
    AVR Microcontroller
    Schematic
    Circuit Design
    Proteus Design Suite
    Freecad
    ANSYS
    SolidWorks
    Autodesk AutoCAD
  • $15 hourly

    • 5.0/5
    • (1 job)
    Experienced Embedded Systems Professional with a passion for teaching programming, mathematics, and physics. Proficient in MATLAB, Python, and control engineering, I excel in imparting knowledge through effective tutoring in electronics, PCB design, and robotics. My expertise extends to research and development, with a strong background in writing research papers. Skilled in instrumentation and microcontroller design, I specialize in microcontroller programming to bring innovative solutions to fruition. Committed to fostering a deep understanding of complex concepts, I offer a unique blend of practical experience and theoretical knowledge. My diverse skill set enables me to contribute effectively to projects ranging from electronics design to control systems development. Whether it's guiding students or collaborating on cutting-edge research, I bring dedication, precision, and a passion for learning to every endeavor.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Microcontroller Design
    Instrumentation
    Robotics
    Research Paper Writing
    Control Engineering
    PCB Design
    Electronics
    Physics Tutoring
    Teaching Programming
    Teaching Mathematics
    Embedded Application
    Python
    Research & Development
    MATLAB
  • $36 hourly

    • 5.0/5
    • (5 jobs)
    I am an enthusiastic, hands-on engineering professional with a proven track record of more than 14+ years in Embedded Systems, Electronics, Power Electronics, and POE-based systems. I have worked on micro-controllers starting from the Atmel 8051 and PIC18, and I have gone through complex systems like PIC32, ARM Cortex-M3, AVR Arduino and STM8 & STM32, etc. I delicately follow the design from concept sketching to bringing up the PCB boards and mechanical enclosures. I enjoy reading about technological developments and adapting to the changes to maintain my skills aligned with industrial standards. 1. Microcontrollers and Embedded Systems - ARM Cortex-M3 - Atmel 8051 Series, ATMEGA328P, ATMEGA32, ATMEGA2560, ATiny85, ATiny45 - PIC10F32X, PIC18f & PIC32 - NRF52840, NRF9160 - STM8, STM32F1, STM32F4 & STM32L1 Series 2. Embedded Firmware Development - MQTT, RPC, HTTP Calls - Serial Protocols, UART, I2C, SPI, 1-Wire, Ethernet, CAN, Fuel Gauges - Sensor Interfacing like Temp, Humidity, Motion, Liquid, Weight, GPS & more. - Arduino, mBed platform, Keil, Mikro C, MPLAB, Atmel Studio - Low Power Sleep Modes for Wearables & Low Power Designs 3. Electronics and PCB Design - PCB Designing using Altium Designer up to 6 Layers - Schematic & PCB Design, Design Reviews, BOMs, Manufacturer shortlisting - Placement Rules, Design Rules, DRC, Layer Stack-up, Reports Generation. - Feedback-based Buck-Boost High Power Design for LEDs Lightening - Low Power Design implementations using low-power components and Sleep Modes etc. 4. Mechanical Design Understanding - Working with Mechanical Engineers for Product Design Challenges - Understanding of 3D Printing, SLA Printing, PLA, PETG, ABS, TPU - 3D Printers debugging and troubleshooting, Ender, Creality 10s, Anycubic Photon 5. Raspberry Pi and Beaglebone Boards 6. RFID Systems - Hardware configurations, System Design & Application Development - Site Surveys and Deployment 7. Technical Proposal Writing - Complete System Level Details, Costing, and Procurement of equipment - System-level Block diagrams, Flow Charts, Network diagrams
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Cryptocurrency
    Embedded C
    STM32
    Analog Electronics
    Rapid Prototyping
    Arduino Firmware
    Product Development
    PIC Programming
    PCB Design
    Embedded System
    Firmware Programming
    nRF52
    C
    LoRa
  • $40 hourly

    • 5.0/5
    • (5 jobs)
    Hi, there! With an engineering background, formerly working in an Air Force and an Aeronautical Complex as an engineer in various domains, capacities and roles, I can summarize my expertise as following: 🚀 Since starting learning GW-BASIC, followed by C++ and other programming languages, I've been attached with learning, imparting training and developing applications in varied domains for over 25 years. 🚀 Though, I've worked on projects ranging from very small to relatively large-scale ones, involving C, C++, Java, C#, Python and Assembly language, I personally prefer C# and modern C++, whenever I'm allowed a free choice. 🚀 With admiration for Python, Power Shell and BASH scripting in administration and automation tasks, I prefer using them in generating well-formed code from processing specification files. 🚀 Regarding frontend development and miscellaneous tasks, JavaScript, HTML, CSS, XAML, SQL and Matlab have been my preferred tools. 🚀 Working at lower-level or directly interacting with Operating Systems, you can find me conversant in dealing with Windows APIs, Linux, Azure RTOS (Eclipse ThreadX), FreeRTOS, and freestanding development. Types of the major projects that I've remained part of: 🚀 Avionics-Weapons Integration. 🚀 Full Mission Flight Simulation. 🚀 Hardware design & development - including IoT/IIoT applications. In general life, I'm peculiarly passionate for learning from any knowledgeable person, and talking about different religions, cultures, arts, history, global politics, modern sciences, and philosophies.
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Mobile App Design
    STM32
    Arduino
    TCP/IP
    Socket Programming
    Embedded Linux
    Linux
    .NET Core
    Qt Framework
    Full-Stack Development
    Desktop Application
    .NET Framework
    C#
    C++
  • $40 hourly

    • 5.0/5
    • (32 jobs)
    I am an Electrical Engineer with over 7 years of hands-on experience, specialising in the design and implementation of innovative IoT systems and robotics. Having successfully completed 1400+ projects on Fiverr, I've earned a stellar reputation with over 1000 5-star reviews from satisfied clients worldwide. My Expanded Expertise: ✅ Sensor Integration: Proven experience integrating various sensors such as temperature, humidity, motion, and proximity sensors into embedded systems. ✅ Communication Protocols: Expertise in communication protocols like I2C, SPI, UART, and CAN bus for seamless interaction between microcontrollers and peripherals. ✅ Power Electronics: Proficient in designing power supply circuits, voltage regulators, and battery management systems for efficient and reliable power distribution. ✅ Machine Learning Integration: Experience incorporating machine learning algorithms into embedded systems for tasks like image recognition, voice processing, or predictive analytics. ✅ Custom PCB Design: Adept at creating custom printed circuit boards (PCBs) with a focus on compact, efficient layouts and signal integrity. ✅ Security Implementation: Knowledgeable in implementing security measures for embedded systems, including encryption, secure boot, and secure data transmission. ✅ Human-Machine Interface (HMI): Experience designing user-friendly interfaces for embedded systems, including touchscreen interfaces and remote control systems. ✅ Environmental Testing: Skillful in conducting environmental testing to ensure the reliability and performance of embedded systems under various conditions. ✅ Microcontroller Mastery: Well-versed in programming Arduino boards (ESP8266, NodeMCU, ESP32, Raspberry Pi, Teensy Boards, Attiny series, Atmel AVR chips, STM32). Project Management Skills: 🚀 Comprehensive Project Management: As a seasoned Electrical Engineer, I can act as your project manager, overseeing the entire project from start to finish. I ensure effective coordination between different project components, managing timelines, and ensuring the delivery of a thoroughly tested and finished project. 💼 Vendor and Supplier Management: Proficient in dealing with manufacturers and suppliers to ensure the smooth procurement of components and materials necessary for project execution. 👥 Team Collaboration: Experienced in managing cross-functional teams, including software and hardware developers, to foster effective communication, collaboration, and successful project outcomes. 🟩 Proof of Concept Deliverables: Components selection list Schematic Code Instructions for testing Software Prototypes: Design of a simple Android app and a simple web front and backend, including database creation and management. 🟩 Mass Production Deliverables: Bill of materials Schematic PCB design Gerber file Pick and place file Firmware Thorough testing and debugging 📝 Note: During the mass production phase, the design and management of the software components will be handled by the dedicated software team. Why Choose Me? I provide comprehensive solutions from concept to mass production, ensuring your project's success. If you're ready to bring your project to life, hit the "Invite" button, and let's start a discussion about your unique requirements. I love the world of Embedded Systems and have created many projects for my clients and would love to create your project, press "Invite" and we will start discussing your project. Best regards, Gul
    vsuc_fltilesrefresh_TrophyIcon Microcontroller Programming
    Raspberry Pi
    Internet of Things
    Hardware Design
    AVR Microcontroller
    STM32
    EasyEDA
    Electrical Engineering
    Python
    ESP32
    Arduino
    Firmware Programming
    Embedded C
    Embedded System
    PCB Design
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Microcontroller Programmer near Islamabad, on Upwork?

You can hire a Microcontroller Programmer near Islamabad, on Upwork in four simple steps:

  • Create a job post tailored to your Microcontroller Programmer project scope. We’ll walk you through the process step by step.
  • Browse top Microcontroller Programmer talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Microcontroller Programmer profiles and interview.
  • Hire the right Microcontroller Programmer for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Microcontroller Programmer?

Rates charged by Microcontroller Programmers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Microcontroller Programmer near Islamabad, on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Microcontroller Programmers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Microcontroller Programmer team you need to succeed.

Can I hire a Microcontroller Programmer near Islamabad, within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Microcontroller Programmer proposals within 24 hours of posting a job description.

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.