Hire the best PCB Designers in İzmir, TR
Check out PCB Designers in İzmir, TR with the skills you need for your next job.
- $39 hourly
- 0.0/5
- (0 jobs)
Earthquake Early Warning System | Software / Embedded / Structural-Civil Engineer |Ofsis Electronics , Izmir Objective: To detect earthquakes in advance, take automatic precautions in buildings, and send emergency signals. Role: PCB design, algorithm development, firmware (machine learning with Python), data analysis. Skills: Microcontroller programming (SPI, I2C), Python-based machine learning, MMI scale conversion, synchronized device data evaluation, early warning algorithm. Seismograph| Software / Embedded / Structural-Civil Engineer |Ofsis Electronics , Izmir Objective: To detect seismic waves Role: PCB design, algorithm development, calculations and verifications for converting raw data into mm/s data. Skills: Microcontroller programming (I2C) Design of NAV-Variometer for Paragliding | Software / Embedded / Structural-Civil Engineer |Ege University Aviation Club Objective: To provide real-time information of airspeed, ascent-descent rate, and GPS location to the paraglider. Role: PCB design, hardware firmware (C/C++), interface design with e-ink display. Skills: Microcontroller programming (I2C, SPI), programming of devices with e-ink display. Smart and Healthy Office Module | Software / Embedded / Structural-Civil Engineer |Ege University Civil Engineering Department Objective: To observe and record data such as the number of people, air quality, light and noise levels, energy consumption, and the openclosed status of windows and doors in a study hall. Role: PCB design of main and auxiliary modules, firmware (C/C++), main module software (Python, C/C++), control interface (HTML, CSS, JavaScript), data analysis (Python-based machine learning and deep learning). Skills: Microcontroller programming (UART, I2C, SPI, GPIO), PCB design, Python, C/C++, HTML, CSS, JavaScript. Structural Health Monitoring Module| Software / Embedded / Structural-Civil Engineer |Ege University Civil Engineering Department Objective: To observe and record the effects of variables such as wind, temperature, pressure, and humidity on the structural behavior of a 10-meter steel tower. Role: PCB design, analog sensor design, data observation interface, and data evaluation algorithm design. Skills: Microcontroller programming (UART, I2C, SPI, GPIO), Python-based machine learning and deep learning, HTML, CSS, JavaScript. Oscillator Development for Structural Dynamics Experimental Laboratory| Software / Embedded / Structural-Civil Engineer |Ege University Civil Engineering Department Objective: To oscillate experimental structures with selectable frequencies using different masses and determine the resonance frequency of the test building. Role: PCB design, firmware development, control interface, and mechanical design. Skills: Microcontroller programming (UART, I2C, SPI), C/C++ programming.
PCB Design
Internet of Things Solutions DesignArduinoAutodesk AutoCADAndroidEarthquake EngineeringSeismicNode.jsResearch & DevelopmentCLinuxMicroprocessorMicrocontrollerEmbedded ApplicationDeep LearningMachine LearningKotlinC++Python - $45 hourly
- 4.9/5
- (4 jobs)
-PCB Design: Schematic Capture / Layout in Altium Designer and EasyEDA -Component Selection and Analyzing Bill of Materials -PCB Level Hardware Prototyping, Debug, Assembly -Strong knowledge at Mentor Graphics PADS and Altium Designer -Single and Multilayer PCB designs according to EMC, EMI. -Controlled impedance/length matching -Extensive knowledge in Electronic Components -Hardware design of communication interfaces such as I2C, SPI, UART, Ethernet, USB, etc - Expert on Switching Mode Power Supply Design -Video interfaces: LVDS, MIPI etc. - Flyback and LLC topology power supply design for LED Lighting applications -Hardware Design and Development of Lighting Automation Systems (DALI and Power Line Communication (PLC) ) - LED Lighting Solutions
PCB Design
EasyEDADigital ElectronicsCircuit DesignC++Electrical EngineeringLighting DesignElectrical DrawingAnalog ElectronicsAltium DesignerHardware DesignElectronic DesignPower Electronics - $20 hourly
- 0.0/5
- (0 jobs)
I am an experienced embedded systems engineer with over 5 years of experience in designing, developing, and testing complex systems. I specialize in hardware and software design, embedded system development, firmware development, and microcontroller programming. ✅ Embedded Software Development ✅ C/C++ Programming ✅ STM32 & ESP32 Development ✅ IoT (WiFi, BLE, XBee, TCP/IP) ✅ BLDC Motor Control (PID Algorithms) ✅ Communication Protocols (I2C, SPI, UART, CANBus) ✅ Sensor Integration (UWB, BNO055) ✅ PyQt5 GUI Development
PCB Design
Microcontroller ProgrammingSensorTCP/IPBluetoothUARTCommunicationsCAN BusSTM32EasyEDAEmbedded CEmbedded SystemESP32Arduino IDEPython - $25 hourly
- 0.0/5
- (0 jobs)
I have a keen interest in hardware design. Thanks to my experience, ambition, and determination, I always aim to be the best. I am constantly researching, keeping up with technology, dynamic, detail-oriented, team-oriented, analytical, entrepreneurial, and responsible. I am an honest engineer who is inclined towards teamwork. Schematic and PCB designs of projects using Altium Designer Researching, selecting, and adding necessary components to projects Simulating circuits in applications such as Proteus, LTspice, and OrcadCapture to analyze their behavior and make necessary adjustments Conducting research and studies on communication protocols such as I2C,SPI, UART, RS232, RS422, RS485, and CAN to incorporate them into projects Working with different converter topologies such as Buck, Boost, Buck-Boost,and LDO to design circuits Calculating power budgets, stack-up, and impedance to determine projectrequirements and design circuits accordingly Preparing necessary documentation and conducting research studies tocomplete project designs that meet requirements.
PCB Design
Power ElectronicsCommunication DesignCircuit DesignElectronic Circuit DesignPrinted Circuit BoardPSPICEDesign SimulationMultilayer PCBProteus Design SuiteEagleMATLABAltium DesignerHardware Design - $10 hourly
- 0.0/5
- (0 jobs)
As an electrical and electronics engineer with extensive experience in developing solutions for small and medium-sized businesses, I can assist you whether you're looking to enhance energy efficiency, develop new products, or optimize your industrial automation processes. My Expertise Includes: Electrical circuit design and analysis Microcontrollers and embedded systems Industrial automation and control systems Power electronics and energy management Sensors and measurement technologies I am also experienced in full project management from start to finish, and regular communication is very important to me, so let's stay in touch.
PCB Design
ElectromechanicsPhysicsCircuit DesignElectrical Layout DesignElectrical DrawingElectrical DesignPyCharmMicrocontrollerSTM32Arduino IDE - $30 hourly
- 0.0/5
- (1 job)
Hello! I am an Electrical and Electronics Engineer with extensive experience in industrial automation projects. I specialize in Siemens and Delta PLC programming, with a strong background in machine automation, building climate control, greenhouse irrigation, water treatment, and various other industrial automation applications. In addition to SCADA software, I develop desktop and mobile applications using Flutter. I also design and build projects with Arduino products and mini PCs like Raspberry Pi, and create web applications. My technical skills extend to 2D and 3D modeling, where I work proficiently with AutoCAD and SolidWorks. With a solid foundation in both theoretical knowledge and hands-on experience, I am here to provide quick and effective solutions to enhance your projects. Feel free to reach out if you're looking for a professional touch in your work!
PCB Design
Greenhouse SoftwareWater Treatment EngineeringESP8266ESP32Electrical EngineeringMicrocontrollerArduinoWeb DevelopmentSQLitePythonSCADAPLC ProgrammingApp DevelopmentFlutter Stack - $50 hourly
- 0.0/5
- (0 jobs)
I'm an electronics engineer with experience in designing embedded wearable systems, remote data collection systems, and HF/VHF filters, amplifiers, and mixers. I have experience in RF amplifier and filter simulation with lumped components using Ansys' simulation tools. I've worked as a contractor to design a wearable biological data monitoring device and developed low-cost data monitoring solutions (the device that I developed was a part of a research project, which eventually got recognized by ISEF as the 2nd place grand award winner). I make my own radios, which work between 7-480 MHz. I have experience in the development and testing of such devices using instruments like VNAs and spectrum analyzers. I mainly work on hardware development but have intermediate-level embedded microcontroller programming and 3D design experience too. I can help with: -Parts selection -Simulation of RF circuits operating between 0-480 MHz -Schematic design -PCB layout design -Creating fabrication outputs
PCB Design
STM32ESP32ArduinoC++PythonSolidWorksEmbedded C3D DesignAltium DesignerKiCadElectronic Circuit DesignCircuit DesignRF DesignElectrical Engineering - $25 hourly
- 4.6/5
- (2 jobs)
I specialize in transforming complex hardware and firmware requirements into industry-standard, production-ready embedded systems.I deliver high-speed PCB designs and optimized firmware solutions tailored for automotive, industrial automation, and IoT applications. What I Offer 🛠️ 🎛️ Advanced PCB Design & Layout -12+ layer HDI PCB designs (microvia, blind/buried via, stacked via). - High-Speed Interface Routing: Ethernet (10/100/1000BASE-T), USB 2.0/3.0, HDMI, DDR4, PCIe, LVDS. -EMI/EMC optimization (shielding, controlled impedance, grounding strategies). -Signal integrity analysis and DFM/DFA-focused workflows. 🔍 Hardware Bring-Up & Validation - Prototype board power-on testing (power sequencing, clock distribution). - High-speed signal validation (TDR, eye diagram analysis). - Peripheral and sensor integration testing. 💾 Efficient Firmware Development - Bare-metal and RTOS-based (FreeRTOS, Zephyr) C/C++ code development. - Low-Level Drivers: DMA, ADC, PWM, watchdog timer, interrupt handler optimization. - Protocol Stack Integration: TCP/IP, USB CDC/HID, Modbus, CANopen, MQTT. - Power Management: Dynamic voltage scaling, sleep mode optimization (µA-level current consumption). -Debugging and testing (JTAG/SWD, unit testing, hardware-in-the-loop simulation). Tools & Technologies 🧰 - PCB Design: Altium Designer, KICAD,LTSPICE - Firmware: STM32CubeIDE, VS Code, GIT, - Validation: Digital Oscilloscope, Multimeter, Soldering Iron and heat gun for PCB rework and prototyping
PCB Design
Embedded LinuxDigital ElectronicsHardware PrototypingHardware DesignInternet of Things Solutions DesignFirmwareESP32STM32Electronic Circuit DesignCircuit DesignKiCadAltium DesignerEmbedded SystemMultilayer PCB Want to browse more freelancers?
Sign up
How hiring on Upwork works
1. Post a job
Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.
2. Talent comes to you
Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.
3. Collaborate easily
Use Upwork to chat or video call, share files, and track project progress right from the app.
4. Payment simplified
Receive invoices and make payments through Upwork. Only pay for work you authorize.
Trusted by
How do I hire a PCB Designer near İzmir, on Upwork?
You can hire a PCB Designer near İzmir, on Upwork in four simple steps:
- Create a job post tailored to your PCB Designer project scope. We’ll walk you through the process step by step.
- Browse top PCB Designer talent on Upwork and invite them to your project.
- Once the proposals start flowing in, create a shortlist of top PCB Designer profiles and interview.
- Hire the right PCB Designer for your project from Upwork, the world’s largest work marketplace.
At Upwork, we believe talent staffing should be easy.
How much does it cost to hire a PCB Designer?
Rates charged by PCB Designers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.
Why hire a PCB Designer near İzmir, on Upwork?
As the world’s work marketplace, we connect highly-skilled freelance PCB Designers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream PCB Designer team you need to succeed.
Can I hire a PCB Designer near İzmir, within 24 hours on Upwork?
Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive PCB Designer proposals within 24 hours of posting a job description.