Hire the best PCB Layout Freelancers in New York

Check out PCB Layout Freelancers in New York with the skills you need for your next job.

Get started

$50 hourly
Jos M.
- 5.0/5
- (2 jobs)
Senior electrical design engineer having 10+ years of experience in design, develop and test Analog and digital electronic circuits for industrial and automation projects. If you need any circuit designing or prototyping, I can help you. I do whole embedded system projects from scratch to the final product including embedded firmware development and testing. Rapid prototyping, wireless devices, LCD Displays etc

PCB Layout
Raspberry Pi
Arduino
Embedded System
Electronic Circuit Design
PADS Mentor Graphics
Altium Designer
Analog Circuit
PCB Design
Multilayer PCB
Digital Electronics
Electrical Engineering
$35 hourly
Evan K.
- 5.0/5
- (5 jobs)
I'm an electrical engineer with extensive experience in end-to-end product development. My expertise includes designing complex printed circuit boards (PCBs), embedded firmware, electrical circuit design, AI/ML, and signal processing.

PCB Layout
Arduino
Embedded System
3D Printing
Cloud Development
DevOps Engineering
Back-End Development
Prototype Design
Digital Signal Processing
Machine Learning
AI Chatbot
AI Agent Development
Multilayer PCB
PCB Design
CAD
Electrical Engineering
$110 hourly
Jared L.
- 5.0/5
- (0 jobs)
🌟 OVERVIEW As a highly skilled PCBA engineer, FPGA / firmware developer, I specialize in designing PCBs and creating robust, high-performance embedded systems tailored for real-time applications. With a deep understanding of both electronic device design and low-level firmware development, I offer unique solutions that bridge the gap between microcontroller-based control system and FPGA signal processing. 🎨 My Areas of Expertise include: • Digital and Analog circuit design • PCB Design using Altium, Eagle, Kicad, EasyEDA, Allegro etc. • Embedded Firmware Development for 8 to 32bit MCUs/MPUs from Microchip, STMicroelectronics etc. (STM32, ESP32, Arduino, PIC, AVR, ARM, and Raspberry Pi) • FPGA (VHDL/Verilog) Design (Intel Cyclone and MAX, Xilinx Spartan, Zynq and Kintex) • Radio Communication Device Design (433MHz, WiFi, Bluetooth, ZigBee)

PCB Layout
Trading Automation
Blockchain
Electrical Engineering
ESP32
MATLAB
Firmware
PIC Programming
Digital Signal Processing
C++
VHDL
RF Microwave Design
FPGA
ARM Microcontroller
STM32
PCB Design
$80 hourly
Leang T.
- 5.0/5
- (0 jobs)
I am AI and system engineer with over 6 years of experience bridging software engineering, infrastructure automation, and machine learning. My background includes developing ERP/MRP systems, integrating enterprise information systems, and designing robust database architectures using Oracle, Postgres, and Delphi. I’ve also led initiatives for document automation and system integration using C++, Qt, and WinAPI across both Windows and Linux environments. On the infrastructure side, I’ve managed VMware and Hyper-V server clusters, overseen Office 365 administration, and delivered server migration and disaster recovery solutions. My work in antivirus management and enterprise backup strategies has focused on both reliability and automation. In recent years, my focus has shifted toward AI and ML engineering—designing and deploying data pipelines across distributed Linux systems, optimizing model workflows for real-time inference and batch jobs, and automating GPU resource management for scalable training environments. My stack includes tools like PyTorch, Visual Studio, and JIRA, along with deep hands-on experience in Linux-based development.

PCB Layout
AWS Server Migration
ASP.NET
C++
Java
CloudKit
CircleCI
Linux System Administration
PCB Design
HVAC System Design
System Monitoring
TensorFlow
PyTorch
$100 hourly
Mike J.
- 4.5/5
- (9 jobs)
Town Line Technologies provides design / layout / consulting services for image sensing and video markets in the consumer, machine vision, medical, military, x-ray, and scientific space. Our passions here are PCB design and CMOS image sensors. 41 years in the image sensor business, with a long history going all the way back to vidicon & plumicon tube cameras for medical x-ray, to CID sensors to 23 years of designing and supplying CMOS linear and 2D area array sensor products, our team can provide you with your image sensor solution! 46 years experienced designing and laying out PCB's! Other areas of expertise is professional Audio & Music equipment. With a wealth of design experience in the mixed signal sensor space, we leverage that experience by offering IC & PCB design and layout contract services. We can tackle a one week layout job or work with well seasoned partners to offer as much or as little as you need to successfully complete your project. We can also offer mechanical drafting services, graphic design as well as working up documentation and marketing materials for your new product or prototype. Project highlights: • Jan 2021-May 2021 Infared Image sensor Layout, Tanner EDA tools, Calibre verification. details under NDA • April 2021 Test PCB for Gyro Navigation for satellite rocket platforms, Orcad / Pads Tool Flow • March 2021 Medical instrument Sensory diagnostic PCB. Pads tool flow • 2020 o Infrared Image sensor Layouts, Tanner EDA tools, Calibre verification. details under NDA o 2020 Medical instrument Sensory diagnostic PCB. Pads tool flow • 2016 thru 2019 o Infrared Image sensors Layout, Tanner EDA tools, Calibre verification. details under NDA o Smart Flame Monitor for commercial boilers and power plants. Orcad / Pads Tool Flow o Electron Microscope direct imaging Sensor platform Orcad / Pads Tool Flow o 80FPS Tomography Medical Instrument for Eye Surface Mapping. Orcad / Pads Tool Flow o Hi Res Full frame Range Finder Digital Camera. Orcad / Pads Tool Flow • Dec. 2014-May 2015 Infrared Image sensor Layout, Tanner EDA tools, Calibre verification. details under NDA • Dec. 2012- March 2016 Panavision Federal Systems AMPPM Periscope Photonics Platform for Virginia Class Submarines. Orcad / Pads Tool Flow

PCB Layout
Analog Circuit
Video Capture Device
Analog Audio
Medical Device
Mechanical Engineering
Analog Electronics
Image Scanning
Electronic Design
Integrated Circuit
IT Consultation
Hardware Design
Bluetooth
PCB Design
$137 hourly
Ian L.
- 4.8/5
- (19 jobs)
I'm fully trained in current electrical engineering practices. I've been doing electronics work for the last couple of years. I specialize in embedded systems; specifically IoT products. I have taken a product from ideation to production including embedded system design, embedded system programming, 3D enclosure modeling and DFM (design for manufacturing). I have worked with manufacturers to make products more robust, cheaper and faster to produce. I work with a lot of startups so I understand the space; tight budget, fast turn-around times & a lot of uncertainty. I can forecast project requirements, timelines and budgets as I've done in the past. ------------------------------------------------------------------------------------------------------ Electronics Experience: low power battery operated devices, microcontrollers, high power switching controls, analog circuits, wireless/bluetooth design, high power LED, product security (encryption), embedded programming C/C++ and peripheral microchip driver creation. I have a lot of experience with non-OS based and lightweight RTOS firmware. ------------------------------------------------------------------------------------------------------ Industrial Design: 3D modeling of enclosures including snaps & press fits, DFM, subassembly design, wire harnesses, low and high volume manufacturing processes (injection molding, resin casting, etc), material I have knowledge of certifications (FCC, UL, CE). ------------------------------------------------------------------------------------------------------ Medical Device In my previous career I did cancer research for 5 years. I am well versed in biological systems, biological tests, testing equipment and non-patient based equipment. I've published multiple peer reviewed papers in this area.

PCB Layout
3D Design
Embedded C
Embedded Linux
Engineering Design
Wireless Communication
Firmware Programming
Integrated Circuit
Firmware
Circuit Design
C
C++
Embedded System
PCB Design
Embedded Application
$100 hourly
Aziz Y.
- 5.0/5
- (5 jobs)
The study of electromagnetic compatibility has been likened to the study of black magic for good reason. Designers of electronic circuits conduct an orchestra of interactions between active and passive components. Underlying these circuits is the unseen world of electromagnetic interactions that can interfere with this orchestra in a way not intended by the original design. I can help you peel back the curtain on this hidden world and help you get to compliance. Every EMC/EMI phenomenon is unique, and I am equipped with years of experience to help you navigate this complex field. I study the behavior of components and can assist you with plans and protocols, redesigns, and troubleshooting to mitigate EMC/EMI issues in your product. I can also create risk assessments so you comply with the latest international standards. The study of electromagnetic compatibility is the study of the physics of behavior, not the physics of failure. Get in touch with your EMC/EMI problems, big or small, and I will do my best to work with you for a resolution. I strive for elegant, cost effective solutions, not band aids. After all, anyone can put a ferrite on the cable. Service I Offer: EMC Test Plans/Protocols/Reports - Test Plans and Protocols per IEC 60601-1-2 - Test Plans and Protocols that satisfy the FDA Office of Device Evaluation Checklist during Pre-Market Approval (PMA) - EMC Risk Assessment - Essential Performance Criteria - EMC Test Reports - EMC/EMI Issues Design Review and General Support - Typical design review time is one or two days - Best to have reviews in the beginning of the project - Reviews are performed closely with the client - Reviews can be done on-site or remotely EMC Troubleshooting Radiated and Conducted Emissions issues - IEC 60601-1-2 - CISPR 11 - CISPR 32 - RTCA/DO-160G - CISRP 12 - CISPR 25 Radiated Immunity issues - IEC 60601-1-2 - IEC 61000-4-3 - AIM 7351731 - RTCA-DO160G Conducted Immunity Issues - IEC 60601-1-2 - IEC 61000-4-6 - IEC 61000-4-16 - RTCA-DO160G Electrostatic Discharge (ESD) Issues - IEC 60601-1-2 - IEC 61000-4-2 - Electrical Fast Transients (EFT) Issues - IEC 60601-1-2 - IEC 60601-4-4 Transient Surge Issues - IEC 60601-1-2 - IEC 61000-4-5 And other specific, non-standardized issues.

PCB Layout
Testing
Root Cause Analysis
Antenna Testing
Compliance
Hardware Troubleshooting
PCB Design
$50 hourly
Sufyan B.
- 0.0/5
- (6 jobs)
Are you looking for a reliable expert to perform detailed computational analysis for your engineering projects? With my extensive experience in mechanical design, CAD, FEA, and CFD, I am here to provide top-notch analysis services tailored using User Defined Functions (UDF’s) to your specific needs. Services Offered: 1. Structural Analysis - FEA: I offer precise and comprehensive structural analysis to ensure the integrity and reliability of your designs. My services include:  Linear and Non-Linear Static Analysis  Dynamic Analysis  Thermal Analysis  Buckling and Fatigue Analysis  Fracture Mechanics 2. Fluid Dynamics - CFD: I provide thorough Computational Fluid Dynamics (CFD) analysis to optimize your designs for performance and efficiency. My services include:  Incompressible and Compressible Flow  Turbulent and Laminar Flow  Multi-phase Flow  Heat Transfer  Aerodynamics and Hydrodynamics 3. Multiphysics: For complex problems involving multiple interacting physical phenomena, I offer advanced coupled analysis solutions, including:  Fluid-Structure Interaction (FSI)  Thermal-Structural Coupling  4. Optimization and Design: Leverage advanced optimization techniques to achieve the best possible design outcomes. My services include:  Topology Optimization  Shape Optimization  Design of Experiments (DOE) I eagerly anticipate discussing your project with you through chat or a call.

PCB Layout
PCB Design
Electrical Design
3D Design
Rapid Prototyping
Mechanical Engineering
Design for Manufacturing
Industrial & Product Design Consultation
Injection Mold
3D Printing
$50 hourly
Colby B.
- 0.0/5
- (1 job)
Embedded Systems Specialist | Hardware & Software Design for ESP32 I’m a hardware and software engineer specializing in embedded systems, with a knack for bringing multiple components together to create something truly unique. Whether your project needs a variety of sensors, internet connectivity, or a seamless, user-friendly experience, I’m here to make it happen. I place a high value on communication. My goal is to ensure we’re on the same page at every step of the process. Reach out for a free consultation! Services Offered: Prototyping: Tangible prototypes are the fastest way to start getting feedback. I specialize in rapid and flexible prototyping. Software Development: Firmware programming, from low-level drivers to application software. Hardware Design: Custom PCB design for prototype and final product runs.

PCB Layout
ESP32
FreeRTOS
Embedded Operating System
Embedded System
Embedded C
PCB Design
Firmware Programming
Internet of Things
Printed Circuit Board
Microcontroller
Manufacturing
Hardware Prototyping
Software Development
Prototyping
Electrical Engineering
$75 hourly
Sherzod P.
- 5.0/5
- (2 jobs)
Hello! I’m a seasoned PCB Designer and Firmware Developer with over 12 years of experience delivering high-quality, innovative solutions in the embedded systems industry. My expertise spans across various industries, including consumer electronics, automotive, telecommunications, and medical devices. - What I Offer: * Custom PCB Design: From concept to prototype, I design intricate PCBs using industry-standard tools like Altium Designer, Eagle, and KiCad. My designs are optimized for performance, manufacturability, and cost-effectiveness. *Firmware Development: I write robust, efficient firmware for microcontrollers, including STM32, AVR, PIC, and ARM Cortex. My code is optimized for performance and reliability, ensuring smooth integration with hardware. * Embedded Systems Expertise: I have a deep understanding of embedded systems architecture, including sensor integration, communication protocols (I2C, SPI, UART, CAN), and real-time operating systems (RTOS). * Schematic Capture and Circuit Design: I create precise schematics that form the backbone of reliable PCB designs. My circuit designs are tailored to meet specific project requirements, whether for high-speed digital circuits or sensitive analog systems. * Prototyping & Testing: I’m hands-on with prototyping and testing, ensuring that designs meet all functional and performance criteria before moving to production. * Product Development Lifecycle: With experience in the complete product development lifecycle, I can assist in everything from initial concept design and proof-of-concept development to final production and testing. - Why Work With Me: * Proven Track Record: Over the past 12 years, I have successfully completed numerous projects for clients worldwide, earning their trust with consistent, high-quality results. * Attention to Detail: I pride myself on precision and attention to detail, ensuring that every design and line of code meets the highest standards. * Effective Communication: I maintain clear and open communication throughout the project, providing regular updates and being responsive to client needs. * Collaborative Approach: I enjoy working closely with clients to understand their needs and deliver tailored solutions that meet or exceed expectations. - Skills: * PCB Design: Altium Designer, Eagle, KiCad, OrCAD * Firmware Development: C, C++, Embedded C, Assembly * Microcontrollers: STM32, AVR, PIC, ARM Cortex * Communication Protocols: I2C, SPI, UART, CAN, USB * Schematic Capture & Circuit Design * Signal Integrity Analysis * Power Management & Optimization * Prototyping & Testing * EMI/EMC Compliance * Product Development Lifecycle Management - Certifications & Education: * Certified PCB Designer (CID) * Bachelor’s Degree in Electrical Engineering * Advanced Firmware Development Certification

PCB Layout
Bill of Materials
Autodesk Fusion 360
KiCad
Altium Designer
Prototyping
Electrical Drawing
PCB Design
Circuit Design
Electrical Engineering
WiFi
Bluetooth
STM32
nRF52
ESP32
Firmware
$60 hourly
Richard M.
- 4.0/5
- (2 jobs)
I will help make your idea reality! I am an Electrical Engineer and have a few years of manufacturing and design experience. I can design and consult on all parts of any engineering problem. From planning to design -- to test, prototyping, and final manufacturing I can do it all. I have a full arsenal of design tools, test verification tools, and manufacturing tools to go from start to finish and I am not afraid to get my hands dirty. Industrial process automation equipment, wearable internet of things (IoT) devices, embedded systems, industrial control systems and other safety equipment are what I am most comfortable with. I am familiar and proficient with sheet metal design, mechanical/electrical layout of electrical control panels, circuit board design and layout, programming embedded systems (C, C++, realtime operating systems (RTOS)). I am also familiar with safety codes (NFPA, NEC, etc) and can comply with any US/NA industrial standard if needed. My philosophy is to fail fast and deliver a working, safe, final product. I offer full product support, teamwork and clear communication through the entire process. I enjoy what I do and love working on all types of projects!

PCB Layout
PCB Design
Internet of Things
OrCAD
Electrical Engineering
Embedded C
Raspberry Pi
Microcontroller Programming
Circuit Design
Arduino
3D Modeling
3D Printing
$125 hourly
Benjamin M.
- 0.0/5
- (0 jobs)
PROFILE Electrical Engineer with 6+ years experience working hardware design. Designed both production hardware and test fixtures for validation under extreme temperature conditions. Excellent design ability for both power and digital electronics.

PCB Layout
Layout Design
Schematic Capture
Multilayer PCB
PCB Design
Computer Hardware Design
Hardware Design
$28 hourly
Alex S.
- 0.0/5
- (0 jobs)
Alex Serrano – Computer Hardware Engineer New York, NY | LinkedIn Profile Alex Serrano is a dedicated Computer Hardware Engineer with a Bachelor of Science in Computer Engineering Technology from SUNY Alfred State College of Technology. With expertise in C/C++, Bash scripting, SQL, and microprocessor design, Alex specializes in hardware/software troubleshooting, PCB design, and system optimization. Passionate about problem-solving and innovation, Alex has hands-on experience in cleanroom environments, soldering, and embedded systems. He has contributed to various technical projects, including variable power supply design, robotics programming, and silicon wafer fabrication. His collaborative mindset and analytical thinking make him a valuable asset in remote and dynamic work environments. In addition to his technical skills, Alex is committed to mentorship and community service, actively engaging in organizations such as the Harlem Educational Activities Fund and Habitat for Humanity. He thrives in roles that challenge his critical thinking and creativity, always seeking opportunities to advance technology and streamline solutions.

PCB Layout
Hardware Testing
PCB Design
Want to browse more freelancers?
Sign up