Upwork home
Sign up
Secondary

Hire the best PCB Layout Freelancers in Islamabad, PK

Check out PCB Layout Freelancers in Islamabad, PK with the skills you need for your next job.
Hire freelancers
Clients rate PCB Layout professionals
Rating is 4.7 out of 5.
4.7/5
based on 447 client reviews
  2. PCB Layout Freelancers
  3. Pakistan
  4. (Current) Islamabad
  • $50 hourly

    • 5.0/5
    • (61 jobs)
    To get top rated services, you need to hire top rated freelancer. With over 17 years of experience in electronics, we strive for success of businesses and products. Masters in the field of High speed PCB design, FPGAs, verilog,VHDL and circuit design, once chosen, We guarantee satisfaction at our end. Our team of engineers have worked on high speed PCBs stuffed with FPGAs, Processors, DDR2/3 interfaces, PHY chips and LVDS Signals all MANUALLY ROUTED. With IBIS models, We can SHOW you a PCB working on computer hence reducing risk of redesign. On FPGAs side, Our engineers have worked on most recent technologies like USB 3.0 Host IP core, DDR3 IP, 8051 IP and hybrid memory cube controller IP to name a few. We look forward to serve you professionally and up to your standards.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    SolidWorks
    Schematic
    Arduino Firmware
    Microcontroller Programming
    Product Design
    Microcontroller Design
    Verilog
    Digital Electronics
    Xilinx
    Multilayer PCB
    PCB Design
    MATLAB
    OrCAD
    Altium Designer
  • $20 hourly

    • 4.9/5
    • (62 jobs)
    I am Graduate Electronics Engineer. I have +4 Years of experience designing PCB, Hardware Designing, components sourcing and different MCU programming. I can assist you in any of the following areas ✅Complete end-to-end electronic product design from concept to complete prototype. ✅Circuit design, Schematic capture, PCB design. ✅Signal conditioning and instrumentation circuits for different types of sensors. ✅Active/passive filters, 0 -10V, 4-20mA,ADCs, Op-Amps, and Instrumentation Amplifiers. ✅Microcontrollers, Communication protocols like SPI, I2C, UART, RS485, RS232, MODBUS RTU/TCP. ✅SMPS, Power design, DC/DC Converters, and FETs. ✅Power, analog & digital circuit simulation, and power/signal integrity analysis. ✅High-speed mixed signal, EMI, and noise reduction. ✅Selection of components (ICs, Resistors, Capacitors, etc…) and preparing cost-effective BOM (Bill of Materials) for circuits with ratings and standards. ✅Planning and Assembling of PCB, Electrical, and Mechanical parts to finish the module as a final product ✅Testing and Troubleshooting of PCBs with SMDs and Through-hole devices. ✅Designing IoT and Ethernet circuits. ✅Firmware & android APP development by using different programmable languages. ✅Energy monitor systems and medical devices ✅Process Controller Design. ✅Water Treatment transmitters like Ph, temperature, ORP, Conductivity, and TDS. ⭐⭐⭐ Capability Matrix⭐⭐ ⭐ ✅Microcontrollers ⚡Arduino: UNO, MEGA, NANO, DUE ⚡STM32: STM32H7,Stm32F1,STM32F0,STM32F3,STM32F4,STM32F7 ⚡PIC: PIC12,PIC16,PIC18 ⚡ESP: ESP32, ESP8266 ✅PCB Tools ⚡Altium ⚡Eagle ⚡EasyEDA ⚡KiCad ✅Simulation Tools ⚡LTSpice ⚡Proteus ⚡WokWi ⚡TinkerCad ⚡PSpice ⚡Multisim I hope to work with you, to help you complete your project and release your product to the market
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Python
    Electronic Circuit Design
    EasyEDA
    Arduino
    Hardware Prototyping
    PCB Design
    Android App
    ESP32
    ESP8266
    Microcontroller Programming
    Altium Designer
    Electronics
    Internet of Things
    KiCad
    Analog Electronics
  • $20 hourly

    • 5.0/5
    • (20 jobs)
    🏆Top Rated 🎖5 Star Reviews 💯100% Job Success --------------- Hi, I'm an Electronics Engineer with extensive hands-on experience, specializing in PCB designs, firmware development/ microcontroller programming, circuit layout, prototyping, IoT, simulations, AI, and robotics. If you're searching for someone to bring your ideas to life, you've found the right person. Here's a summary of my services: 🔸️Electrical Circuit Design (Low Noise, Analog, Digital, High Speed) 🔸️Multi-layer and Flexible PCB designs (Altium Designer, EasyEDA, KiCAD, and EAGLE) 🔸️ Microcontroller programming/ Firmware Development (STM32, ARM, ATMEGA, 8051, Arduino, RPI, ESP32, PIC) 🔸️BOM optimization and mass manufacturing 🔸️ Development of embedded systems and prototyping 🔸️ Cloud and IoT-based system development 🔸️ RF and Antenna Design 🔸️ Robot Operating System 🔸️ Dev in NI Lab View 🔸️ Simulation (Simulink, Multisim, and Proteus) Additional services include: 🔹️ 2D/ 3D CAD Model (Solidworks, CREO, Fusion 360) 🔹️ Concept Design 🔹️ Technical Documentation and Tutorials 🔹️ MATLAB 🔹️ Creation of Graphical User Interfaces (GUI) 🔹️ Android app development 🎗What truly distinguishes me is my passion and enthusiasm. I maintain open communication with my clients to ensure that the delivered work precisely aligns with their requirements🎗 I am looking forward to the opportunity to collaborate with you. Keywords: Multi-Layer PCB Design, Arduino, Raspberry Pi, Esp32, Altium, EasyEDA, Electrical Designs, Electronics Solutions, Prototype, Circuit Simulation, CAD Model, Enclosure Design, MATLAB, Simulink, Lab View, Robotics, Machine Learning, ROS, AI, RF Design, High-Speed Designs, ATMEGA Cheers!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Embedded C
    STM32
    Altium Designer
    Robot Operating System
    Raspberry Pi
    ARM Cortex-M
    Arduino
    ESP32
    Microcontroller Programming
    Electronics
    Robotics
    Firmware Programming
    Circuit Design
    Embedded System
    PCB Design
  • $22 hourly

    • 5.0/5
    • (8 jobs)
    Hello! I’m Abdullah, a product designer and engineer with a knack for bringing innovative ideas to life. I don’t just run a CAD software, I partner with clients to transform their concepts into real, market-ready products. Here’s how ⬇️: ✅ Deep Diving into Your Ideas: I believe in the power of collaboration. We’ll discuss your ideas in detail to make sure every aspect is covered and right goals are set. ✅ End-to-End Product Design: Starting from initial concepts and finishing at manufacturing, I’m with you at every stage, making the journey as smooth as possible. ✅ All steps included: The goal is to run your idea through a very structured tunnel made up of stages that are backed by practical experience and engineering knowledge. Some of there are: 👉 Concept design 👉 Mechanical Calculations and simulations 👉 CAD design 👉 Embedded systems and sensor integration 👉 PCB design 👉 Prototyping and 3D printing 👉 DFM and Manufacturing Consultancy ✅ Prototyping and Iterative Design: I work through multiple design iterations, ensuring each version of your product gets closer to perfection. ✅ Proactive Problem-Solving: My goal is to anticipate any hurdles before they arise and suggest improvements that make your reliable reliable from multiple angles. ✅ Exploring Further Possibilities: Whether it's enhancing an existing design or creating a new version with ideas that I present from my experience, I strive to maximize your product’s potential. ✅ Confidentiality and IP Protection: Your ideas are valuable, and I take confidentiality seriously. I’m always ready to sign a Non-Disclosure Agreement (NDA) to protect your intellectual property. Whether you’re refining an existing product or starting from scratch with a new idea, or if you're just stuck in one of the steps and need to get that obstacle out of the road, I’m here to help you every step of the way. My team at Neoken Technologies and I bring a combined experience of more than 25 years to provide hands-on support and practical consultation. Check out more about what we do and the woks we've done on our website by searching "Neoken Technologies". Let’s turn your ideas into reality!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    PCB Design
    Embedded System
    Microcontroller Programming
    Rapid Prototyping
    Design for Manufacturing
    Product Concept
    CAD
    Concept Design
    Printable 3D Models
    3D Printing
    Mechanical Design
    Industrial Design
    New Product Innovation
    Industrial & Product Design Consultation
    Product Design
  • $20 hourly

    • 4.8/5
    • (25 jobs)
    Ready to take your electronics project to the next level with expert PCB design and custom firmware development? Whether you're working with STM32, ESP32, Raspberry Pi, or Arduino, our experienced team is here to transform your innovative ideas into reality. We specialize in crafting high-performance PCB layouts and delivering robust, tailored firmware solutions. No matter the complexity, we're here to guide you through every step of the process. Let’s collaborate to bring your project to life—contact us today to get started!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    PCB Design
    Microcontroller
    FreeRTOS
    Firmware Programming
    Electronic Circuit Design
    Circuit Design
    Embedded Application
    Embedded System
    STM32
    Wireless Communication
    ESP32
    Sensor
    LoRa
    Arduino
    Arduino Firmware
  • $35 hourly

    • 5.0/5
    • (30 jobs)
    I am an Electrical Engineer with over 7 years of hands-on experience, specialising in the design and implementation of innovative IoT systems and robotics. Having successfully completed 1400+ projects on Fiverr, I've earned a stellar reputation with over 1000 5-star reviews from satisfied clients worldwide. My Expanded Expertise: ✅ Sensor Integration: Proven experience integrating various sensors such as temperature, humidity, motion, and proximity sensors into embedded systems. ✅ Communication Protocols: Expertise in communication protocols like I2C, SPI, UART, and CAN bus for seamless interaction between microcontrollers and peripherals. ✅ Power Electronics: Proficient in designing power supply circuits, voltage regulators, and battery management systems for efficient and reliable power distribution. ✅ Machine Learning Integration: Experience incorporating machine learning algorithms into embedded systems for tasks like image recognition, voice processing, or predictive analytics. ✅ Custom PCB Design: Adept at creating custom printed circuit boards (PCBs) with a focus on compact, efficient layouts and signal integrity. ✅ Security Implementation: Knowledgeable in implementing security measures for embedded systems, including encryption, secure boot, and secure data transmission. ✅ Human-Machine Interface (HMI): Experience designing user-friendly interfaces for embedded systems, including touchscreen interfaces and remote control systems. ✅ Environmental Testing: Skillful in conducting environmental testing to ensure the reliability and performance of embedded systems under various conditions. ✅ Microcontroller Mastery: Well-versed in programming Arduino boards (ESP8266, NodeMCU, ESP32, Raspberry Pi, Teensy Boards, Attiny series, Atmel AVR chips, STM32). Project Management Skills: 🚀 Comprehensive Project Management: As a seasoned Electrical Engineer, I can act as your project manager, overseeing the entire project from start to finish. I ensure effective coordination between different project components, managing timelines, and ensuring the delivery of a thoroughly tested and finished project. 💼 Vendor and Supplier Management: Proficient in dealing with manufacturers and suppliers to ensure the smooth procurement of components and materials necessary for project execution. 👥 Team Collaboration: Experienced in managing cross-functional teams, including software and hardware developers, to foster effective communication, collaboration, and successful project outcomes. 🟩 Proof of Concept Deliverables: Components selection list Schematic Code Instructions for testing Software Prototypes: Design of a simple Android app and a simple web front and backend, including database creation and management. 🟩 Mass Production Deliverables: Bill of materials Schematic PCB design Gerber file Pick and place file Firmware Thorough testing and debugging 📝 Note: During the mass production phase, the design and management of the software components will be handled by the dedicated software team. Why Choose Me? I provide comprehensive solutions from concept to mass production, ensuring your project's success. If you're ready to bring your project to life, hit the "Invite" button, and let's start a discussion about your unique requirements. I love the world of Embedded Systems and have created many projects for my clients and would love to create your project, press "Invite" and we will start discussing your project. Best regards, Gul
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Raspberry Pi
    Internet of Things
    Hardware Design
    AVR Microcontroller
    STM32
    EasyEDA
    Electrical Engineering
    Python
    ESP32
    Arduino
    Microcontroller Programming
    Firmware Programming
    Embedded C
    Embedded System
    PCB Design
  • $20 hourly

    • 4.2/5
    • (80 jobs)
    Hi my name is Khawaja Taimoor I’m an Electronic Engineer. I spend most of my time nourishing new design ideas and giving them a tangible shape. I am a professional Engineer having 4 years of coding teaching experience. I have done a master's degree in Electrical Engineering as a major from university and doing research work for my M.Phil degree right now. I know how to guide students in the right way when he/she is struggling with coding problems. MY SERVICES INCLUDES FOLLOWING: ✔Basic Task ✔MATLAB Scripts ✔Electronic design ✔Python Language ,C++,C,JAVA ✔Error Corrections ✔GUI ✔ Programming Micro Controllers ✔Calculus ✔Mathematical Modeling ✔Numerical Analysis ✔Control System Designing ✔Simulink Designing ✔Signal Processing ✔Image Processing ✔Histogram Charts ✔Required Graphs/Visuals Generation ✔Data Processing ✔Data Visualization ✔Data analysis ✔Engineering Problems ✔Fourier transforms ✔Filters ✔Linear/ Non-linear Regression ✔Mathematical Formulations Deals in all kinds of works related to these subjects and topics. i will also deal with Physics lab Thanks
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Prototype
    PCB Design
    Chemistry
    Physics Tutoring
    MATLAB Script
    RStudio
    Simulink
    Digital Electronics
    Arduino
    Calculus
    Python
    Java
    C++
    Physics
    MATLAB
  • $30 hourly

    • 4.8/5
    • (5 jobs)
    I’m an Electrical Engineer with experience in the design of Power Electronics applications particularly in the development of Resonant Converters for Induction Heating based applications. Whether you’re struggling with any Electrical System Design, implementing a traditional control, or an AI-based monitor – I can help! 1. I’m experienced in MATLAB, Proteus, Microcontrollers, and PLCs. 2. I’ll fully project manage your brief from start to finish 3. Regular communication is really important to me, so let’s keep in touch!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Altium Designer
    PCB Design
    Microcontroller Programming
    Technical Writing
    Circuit Design
    Analog Circuit
    Electrical Engineering
    PLC Programming
    Python
    Control Engineering
    Arduino
    Proteus Design Suite
    MATLAB
    Power Electronics
    Semiconductor
  • $40 hourly

    • 5.0/5
    • (86 jobs)
    Looking for a Product Development expert to turn your innovative ideas into reality? Or do you need a Hardware Developer to take your existing electronics to the next level? Whether it's a concept that needs to be fleshed out or a product that requires professional-grade electronics, you've come to the right profile. I am an Electronics and Electrical Engineer with over 6 years of experience in the Hardware and Electronics Design industry. My expertise spans from conceptual design to mass production, helping companies like Flux.ai, LiTrek, Simplifi Automation, UpLYFT Wearables, Microclimate Air, and Livello GmBH turn their ideas into successful products that have generated millions in revenue. I have extensive experience in developing hardware solutions that are not only innovative but also scalable for mass production. Areas of Expertise: Product Development: From concept to prototype, I specialize in taking a product idea and developing it into a fully functional and manufacturable design. Schematic and Multi-Layer PCB Design: Including part selection, sourcing, and generation of manufacturing files and documentation. Hardware Design: Analog and digital circuit design, microcontroller-based embedded systems, RF modules, GPS, Bluetooth, WiFi, and IoT integration. Mass Production: Expertise in scaling designs for large-scale manufacturing, including prototype testing, debugging, and design optimization for cost reduction and efficiency. PCB Reverse Engineering: Offering detailed analysis and re-engineering of existing designs. Embedded Firmware Development: Proficient in C/C++, Arduino, STM32, and other microcontroller platforms. PCB Design Software Expertise: Altium Designer KiCad Mentor Graphics Xpedition Proteus Flex PCB and RF Design Additional Services: Manufacturing Support: From initial designs to final production, I provide end-to-end support, including coordination with manufacturers like JLCPCB, PCBWAY, and ELECROW. Prototyping and Testing: I can handle everything from small-scale prototyping to large-scale testing and quality assurance. Global Shipping and Logistics: Need to ship your product worldwide? I’ve got that covered too. If you're looking to bring a cutting-edge product to market or need expert assistance with your hardware and electronics, don't hesitate to reach out. Let's make your vision a reality.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Simulink
    Arduino
    Analog Electronics
    Digital Electronics
    Hardware Design
    Altium Designer
    KiCad
    EasyEDA
    Power Electronics
    Circuit Design
    PCB Design
    Embedded System
    Electronic Design
    Electronics
    Electrical Engineering
  • $35 hourly

    • 4.9/5
    • (108 jobs)
    I am Senior Electrical and Electronic PCB design expert with over 7 years of good experience in handling Electronic systems and Power System analysis for Generation, Transmission, Distribution Utilities, Bulk power-consuming industries, Control systems, and Digital Logic Design(Controller Programming), industrial devices, IoT, and Machine learning. The following are the list of services: ☑𝐏𝐨𝐰𝐞𝐫 𝐒𝐲𝐬𝐭𝐞𝐦 𝐒𝐞𝐫𝐯𝐢𝐜𝐞𝐬: Good enough experience in the modeling of Power Systems, Control systems Scheme, Communication Systems Diagrams, and Digital Logic Design solutions using different methods and simulation software such as ETAP(Electrical Transient Analysis Program), PowerWorld Simulator, DIgSILENT (Power Factory), DIALux, MATLAB, Labview, Draw.io, Verilogue/VHDL/FPGA programming, Arduino, STM32, Multisim, Microblaze, and Xilinx. ☑𝐏𝐂𝐁 𝐃𝐞𝐬𝐢𝐠𝐧 𝐒𝐞𝐫𝐯𝐢𝐜𝐞𝐬: I have experience of about 7 years in Schematics Design, PCB design, BOM creation, Gerber (manufacturing) files, and programming. Completed successfully around 90+ projects using Kicad, Altium, ZenitPCB, Gerbv, Eagle PCB, and Circuit Maker. ☑𝐌𝐄𝐏 𝐃𝐞𝐬𝐢𝐠𝐧 𝐒𝐞𝐫𝐯𝐢𝐜𝐞𝐬: Mechanical, Electrical & Plumbing Design. ☑𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐃𝐞𝐬𝐢𝐠𝐧 𝐚𝐧𝐝 𝐃𝐞𝐯𝐞𝐥𝐨𝐩𝐦𝐞𝐧𝐭: Turning concepts into reality(Testing, Prototype, and Shipment). ☑𝟑𝐃 𝐌𝐨𝐝𝐞𝐥𝐢𝐧𝐠: Creating precise visualizations of designs (Product Enclosure Design) ☑𝟑𝐃 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠: Rapid prototyping for IOT products. ☑𝐏𝐫𝐨𝐦𝐨𝐭𝐢𝐨𝐧𝐚𝐥 𝐕𝐢𝐝𝐞𝐨𝐬: Engaging advertisements to showcase your products. ☑𝐒𝐨𝐮𝐫𝐜𝐞 𝐀𝐮𝐠𝐦𝐞𝐧𝐭𝐚𝐭𝐢𝐨𝐧: Providing Dedicated Resource in the domain of Electrical and Mechanical Engineering ☑𝐒𝐨𝐥𝐚𝐫 𝐒𝐲𝐬𝐭𝐞𝐦 𝐃𝐞𝐬𝐢𝐠𝐧: Harness the Power of the Sun with Precision and Efficiency Furthermore, I provide the services of basic and detailed engineering projects based on ITB project specifications. Datasheets and plot plan. IMPORTANT: I have sound knowledge and access to UL standards and I can design products that comply with UL Standards. *******I DO WHAT I COMMIT AND I COMMIT WHAT I CAN DO******* Regards Abubakar. MA
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Multilayer PCB
    Electrical Engineering
    Electrical Drawing
    Power System
    Electrical Design
    Research Papers
    SolidWorks
    Autodesk AutoCAD
    MATLAB
    Solar Design
    Solar Energy
    MEP Design
    Electrical Layout Design
    Schematic
    PCB Design
  • $38 hourly

    • 5.0/5
    • (1 job)
    I am an Electrical Engineer working on state of the art projects. I have an experience of over 5 years in prototyping, designing, testing and debugging various projects. I am a professional Hardware Design Engineer which encompasses many skills such as PCB designing, writing Firmware, designing electrical circuits, and much much more! I have worked on hundreds of engineering projects throughout my career. Some of these projects include AC to DC inverters (working prototypes and product in development), Li-Ion battery management systems (BMS), Electric Motor control (PWM), GPS tracking systems, EV's, test jigs, etc. I am a do it all type of person and try my best to learn the task and implement it as much as possible by myself instead of designating tasks to others or making excuses. Engineering is my passion not my career and I would love to get started on whatever task you may have!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Robotics
    PCB Design
    Embedded System
    Raspberry Pi Firmware
    Altium Designer
    Electronics
    Microcontroller
    Arduino Firmware
    Electronic Circuit Design
    Power Electronics
    C++
    Electrical Design
    Electrical Engineering
  • $35 hourly

    • 5.0/5
    • (3 jobs)
    Experienced Embedded System Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in Embedded Circuits & PCB Designing, Embedded Firmware Development, Research tasks and Components procurement . Hands on experience: * Microcontrollers (STM32F4, TM4C123GH6PMI, PIC16, PIC18, PIC32).. * Displays (TFT, Graphical Display LCD, Char Display LCD,Seven segment ). * SoCs * SIMCOM GSM/GPRS (Hardware Design And Embedded Programming). * nRF Bluetooth (Hardware Design). * ESP (WiFi) (Hardware Design). * Sensors and Modules (Honeywell Pressure Sensors, Sharp Infrared Sensor, Secugen Fingerprint recognition device, Magnetic Card Reader and NFC Reader). * DC Motor Control (H-Bridge Design and Microcontroller Programming). * Power supply design and Lipo Battery charging. * Microcontroller based Digital Tachometer.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Prototyping
    Hardware Design
    Internet of Things Solutions Design
    Circuit Design
    Altium Designer
    Electronic Circuit Design
    Eagle
    Electronic Design
    PCB Design
    Embedded Application
    Arduino
    LoRa
    Embedded System
    ESP32
    STM32
  • $32 hourly

    • 5.0/5
    • (11 jobs)
    Hello, I’m the CEO of 𝗣𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗲 𝗚𝘂𝗿𝘂, pioneering in Consumer Electronics Prototyping and Products Designing, PCB Manufacturing with over a decade of experience in the Embedded Electronic Manufacturing Industry. Having completed numerous projects globally, my expertise bridges the gap between concept and reality in electronics product manufacturing. Unleash your creativity, dive into the possibilities, and turn your visions into reality with the resources and inspiration you'll find here. 𝗘𝘅𝗽𝗲𝗿𝘁𝗶𝘀𝗲: I specialize in streamlining the prototyping process, offering rapid quotes and connections with world-class manufacturers. Whether your project is large or small, I aim to provide a seamless and efficient service that exceeds your expectations. 𝗖𝗼𝗹𝗹𝗮𝗯𝗼𝗿𝗮𝘁𝗶𝗼𝗻: I am always keen on exploring new opportunities and engaging in collaborative efforts. If you’re looking for a partner who brings deep technical knowledge along with a commitment to quality and innovation, let’s connect and bring your project to life. 𝗦𝗸𝗶𝗹𝗹𝘀 𝗗𝗲𝘁𝗮𝗶𝗹𝗲𝗱: 🔌 Analogue Circuit Design: - Crafting circuits to process real-world signals. 💾 Digital Circuit Design: - Binary systems for reliability and precision. 🛠 Prototype Production: - Turning ideas into tangible, testable items swiftly. 🔧 Interface Circuit Design: - Bridging diverse components for seamless communication. 📡 Switch Mode Power Supply: - Efficient power conversion for various applications. 🎛 Microprocessor & FPGA Design: - Crafting the brains behind complex electronics. ⚡ Power Electronics: - Managing high-power components for optimal performance. 🖥 PCB Design Tools: - Utilizing industry-leading software like Altium for precise PCB designs. 💻 Embedded Software: - Developing software that is optimized for hardware performance. 📶 High-Speed Communications: - Ensuring rapid data transfer over networks. 💡𝗥𝗲𝗮𝗱𝘆 𝘁𝗼 𝘁𝗿𝗮𝗻𝘀𝗳𝗼𝗿𝗺 𝘆𝗼𝘂𝗿 𝗶𝗱𝗲𝗮 𝗶𝗻𝘁𝗼 𝗿𝗲𝗮𝗹𝗶𝘁𝘆 𝘄𝗶𝘁𝗵 𝗽𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗮𝗻𝗱 𝘀𝗽𝗲𝗲𝗱? 𝗖𝗼𝗻𝗻𝗲𝗰𝘁 𝘄𝗶𝘁𝗵 𝘁𝗵𝗲 𝗣𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗲 𝗚𝘂𝗿𝘂 𝘁𝗼𝗱𝗮𝘆 𝗮𝗻𝗱 𝗹𝗲𝘁’𝘀 𝗺𝗮𝗸𝗲 𝗶𝗻𝗻𝗼𝘃𝗮𝘁𝗶𝗼𝗻 𝗵𝗮𝗽𝗽𝗲𝗻.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    3D Printing
    Product Design
    Prototype
    Prototype Model
    Electronic Design
    Prototyping
    Electronic Circuit Design
    Altium Designer
    Embedded System
    Circuit Design
    Arduino
    Electronics
    Hardware Prototyping
    PCB Design
    3D Modeling
  • $35 hourly

    • 4.9/5
    • (72 jobs)
    Experienced engineer specializing in electronics and product design, with a keen focus on intricate printed circuit board designs, prioritizing manufacturability. My expertise spans the entire product development cycle — from conceptualization to prototyping, utilizing in-house tools for design, construction, programming, and rigorous testing. I possess a diverse portfolio, having contributed to various industries. This ranges from formulating initial concepts and building prototype devices, to orchestrating the seamless transition to large-scale production manufacturing. More detail about Embedded platforms of my design experience: Primary Offerings: - Hardware Design and printed circuit board (PCB) layout with Altium Designer - MCAD collaboration for product design - Build and test prototypes(in-house assembly capability and testing equipment) - Help and management in product manufacturing - Troubleshoot and fix incomplete or failed designs - Bare-metal and RTOS based firmware development I have crafted an extensive array of circuit boards, encompassing: - Standard 2 and 4-layer boards with surface mount and through-hole components - HDI boards upto 14-layers - Highspeed boards with controlled impedance and length matching - Flex and rigid-flex boards for complex mechanical shapes - Products having Bluetooth, BLE, WiFi, serial interfaces(SPI, I2C, RS-232, RS-485, CAN) and highspeed interfaces(USB2.0, USB3.0, PCIe, SATA, MIPI CSI-DSI, Ethernet). Whether it entails transforming an existing Arduino/Raspberry Pi prototype into a marketable product or crafting an entirely new offering from its inception, I take pleasure in delivering tailor-made technical solutions that precisely align with your requirements. Have any product idea, contact me through Upwrok to discuss!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Electrical Engineering
    FPGA
    Bluetooth LE
    nRF52832
    ESP32
    STM32
    Internet of Things Solutions Design
    Industrial Internet of Things
    Multilayer PCB
    Hardware Design
    Embedded System
    Altium Designer
    PCB Design
    Hardware Prototyping
  • $40 hourly

    • 5.0/5
    • (16 jobs)
    A seasoned embedded developer who is Creative, results driven and having experience of over 30 years in design/development. Problem solver with a passion for using technology effectively to improve products; skilled in grasping the big picture, conceptualizing and implementing solutions. Results oriented, recognized for resolving critical issues to ensure success. I have worked on firmware design for embedded systems for different projects in IoT, GNSS, IMU, DGPS and RTK and computing domains, building projects from scratch to delivery. Anti-Jamming, Anti-Spoofing of GNSS Systems. I have done this using SDR, employing GNSS-SDR/iotSDR/pocketGNSS piksi GNSS and other custom SDR. I have also worked on IMU (Inertial Measurement Unit), LiDaR (Light Detetion and Ranging), AHRS (Attitude and Heading Reference System), INS (Inertial Navigation System), FCC (Flight Control Computer) etc. I have also worked on DSP, Audio and Acoustic Signals, Algorithms implementation. I have good command of C and C++ languages. Also know assembly language of many processors, including, 8-bit and 32 bit microprocessors e.g. AVR, STM32, ESP32 and different variants of ARM. I have worked on TI DSPs, intel 8086, STM32, ESP32, Xilinx ZYNQ processors, from scratch to design, development to production, bring-up, Firmware in baremetal, Small OS (uCOS, free RTOS) and large OS like Linux.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    PCB Design
    Firmware Programming
    Atmel AVR
    Internet of Things
    Digital Signal Processing
    GPS
    Electrical Engineering
    Arduino
    Embedded System
    C++
    C
    STM32
    ESP32
    FPGA
    Firmware
  • $20 hourly

    • 4.9/5
    • (49 jobs)
    Welcome to My Upwork Profile! 🌟 Hello, and welcome! I'm a professional specializing in Smart Edge Solutions, with a strong focus on IoT, robotics, SaaS-based AI solutions, and various programming languages. Here's a brief overview of my skills and expertise: My Expertise: 🛠️ Smart Edge Solutions Innovative and problem-solving approaches Comprehensive solutions integrating software and hardware Implementing single layer AI models directly on Edge devices 🌐 IoT Development Efficient data collection systems Real-time monitoring Intelligent decision-making Scalable and secure IoT platforms 🤖 Robotics Robot perception, control, and navigation algorithms Autonomous systems development Expertise in robotic frameworks and libraries 📊 SaaS-Based AI Solutions Developing AI-driven SaaS applications Leveraging machine learning and data analytics Delivering scalable and intelligent software solutions 💻 Programming Languages Python: Versatile scripting and automation C#: Robust application development C++: High-performance computing JS/TypeScript: Dynamic web applications 📱 Web & Mobile App Development React (Native): Building responsive user interfaces Angular (Ionic): Creating intuitive and scalable applications Efficient backend systems Kotlin: Using compose UI with material3 built Multiple platform base apps ☁️ Google Cloud Platform (GCP) Application deployment and management Services like Compute Engine, Cloud Storage, Cloud Functions Ensuring robust, secure, and cost-effective solutions Why Choose Me? Highly motivated and detail-oriented Committed to delivering high-quality results Expertise in both software and hardware integration If you're looking for a skilled professional to bring your Smart Edge Solutions, SaaS-based AI projects, IoT, or robotics developments to life, I would love to collaborate with you. Let's discuss how I can contribute to your success! Thank you for visiting my profile. I look forward to working with you!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Bluetooth LE
    NVIDIA Jetson
    Google Cloud Platform
    Azure IoT HuB
    AWS IoT Core
    LoRa
    C
    PCB Design
    Embedded C
    Raspberry Pi
    ESP32
    FreeRTOS
    CAN Bus
    Python
    STM32
  • $25 hourly

    • 5.0/5
    • (3 jobs)
    A Mechatronics Engineer with over 4 years of experience in Embedded Hardware and Software Design. I deisgn and build custom solutions for different real-life problems and also perform firmware development and testing for each solution. I specialise in designing complex industry standard PCBs with attention to detail in design for manufacturability and developing deployment-ready firmwares for them. I have hands-on experience with professional series microcontrollers such as ESP32/STM32/ARM controllers/ATMEL/Raspberry Pi etc. And I have developed a variety of boards with communication protocols such as UART, SPI, I2C, RS232, RS485, Modbus etc. My arsenal of tools include Altium Designer, EasyEDA, KiCAD and Proteus for designing and simulation and Arduino IDE, PlatformIO and VisualStudio for firmware development in Python or C++. Please feel free to reach out to me.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Firmware
    ESP32
    Electronics
    Hardware Prototyping
    Altium Designer
    Internet of Things
    AWS IoT Core
    Arduino
    PCB Design
    Embedded System
    Raspberry Pi
    Microcontroller Design
    Python
    C++
  • $27 hourly

    • 4.6/5
    • (8 jobs)
    A professional Engineer and technical manager with extensive design experience of Power electronics(DC-DC, AC-DC converters), Regulated power supplies, amplifiers, motor drivers, Arduino, Autonomous Robots/rovers, Image Processing, MATLAB, Embedded Systems, Controller Design, IoT solutions, and Lab Work.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Hardware Design
    Altium Designer
    Research Papers
    Power Electronics
    Design Simulation
    Digital Electronics
    Simulink
    PCB Design
    Arduino
    Circuit Design
    Eagle
    Academic Writing
    Technical Writing
    Electrical Design
  • $10 hourly

    • 5.0/5
    • (4 jobs)
    Greetings! Welcome to my portfolio. My name is Arslan, an Electrical Engineer specializing in the integration of Computer Vision, AI, and Robotics with advanced electronics. My expertise spans both software development and hardware integration, using tools such as VS Code, Anaconda, and MATLAB, along with platforms like Arduino, STM32, ESP32, and Raspberry Pi. My portfolio includes a series of sophisticated projects that leverage the power of computer vision and machine learning, which are foundational for robotic perception and interaction. These projects cover a range of applications from image processing to visual SLAM, all designed to enhance the capabilities of robotic systems. On the electronics and robotics side, my work involves: Sensor Integration: Designing systems that incorporate a variety of sensors—such as GPS, LiDAR, and other environmental sensors—to enhance robotic navigation and environmental interaction. Robotics Operating System (ROS): Developing and deploying robotics applications using ROS for seamless integration and management of complex robotic operations. Raspberry Pi & Arduino: Utilizing these platforms for prototyping and implementing embedded systems that serve as the backbone for robotics projects. PCB Design: Crafting custom printed circuit boards that support the unique needs of robotics projects, ensuring reliability and functionality in diverse operational environments. STM32 and ESP32 Microcontrollers: Implementing these powerful microcontrollers to manage real-time robotic operations, providing robust control and processing capabilities. Embedded Systems: Developing embedded software that integrates tightly with hardware to deliver responsive and efficient robotic behaviors. My portfolio highlights a wide array of projects that showcase my expertise in robotics, computer vision, and machine learning, including: 3D to 2D Camera Projection and vice versa in MATLAB, crucial for robotic vision systems. Advanced Image Filtering using Hough Transform in MATLAB, applied to robotic navigation systems. Autonomous UGV Lane Tracking using MATLAB, demonstrating real-time image processing in robotics. Comprehensive Image Processing Pipeline in MATLAB, tailored for robotic applications. Local Dataset-based Monocular Visual SLAM in MATLAB, essential for autonomous robot mapping. Shoulder Shrugging Detection with Python, showcasing human-robot interaction. Dynamic Scene Segmentation in Python, applied to improve robotic environmental understanding. KNN-based Face Recognition in MATLAB, used in robotic security systems. Hand-coded Linear and Logistic Regression in MATLAB and Python, for robotic decision-making processes. Python-driven Automated Radio Atmospheric Extraction, integrating AI with environmental sensing robotics. Why choose to collaborate with me? I offer a unique combination of skills in AI, Computer Vision, and Robotics, enriched with a deep understanding of electronic systems, making me a versatile asset for any technologically advanced project. My approach guarantees swift project execution, competitive rates, and a commitment to high-quality outcomes tailored to meet your specific needs. My background is supported by multiple certifications and a strong practical portfolio that demonstrates my ability to innovate and deliver complex systems. Please contact me if you have any specific inquiries or require further details about my projects. I am excited to explore how my skills in AI, Computer Vision, Electronics, and Robotics can be put to work on your next project. Looking forward to our future collaboration on innovative and technology-driven solutions!
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Circuit Design
    Embedded System
    PCB Design
    Algorithm Development
    EasyEDA
    Embedded C
    Amplifiers & Filters
    Eagle
    Multilayer PCB
    NI Multisim
    Proteus Design Suite
    Arduino
    MATLAB
    C++
  • $18 hourly

    • 4.8/5
    • (4 jobs)
    - Experienced Mechatronics Engineer specializing in embedded systems software and hardware design. - Over 6 years of expertise in developing PCB designs and firmware for various embedded systems projects. - Proficient in designing customized PCB layouts tailored to specific project requirements. - Skilled in firmware development for seamless integration and optimal performance of embedded systems. - Dedicated to clear communication, prompt responses, and meeting project deadlines. - Expertise in microcontrollers like ESP32, ESP8266, Arduino etc. Contact me now to discuss your embedded systems requirements and let's collaborate to achieve your goals.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Product Development
    Product Design
    Electronics
    Electronic Circuit Design
    Internet of Things
    Microcontroller
    Robotics
    Circuit Design
    Home Automation
    PCB Design
    ESP32
    Raspberry Pi
    Arduino
    C++
    Embedded System
  • $12 hourly

    • 5.0/5
    • (2 jobs)
    An Electrical Engineer specialized in Electronics. I am working in the R & D Firm as a Senior Design Engineer. I have more than three years of professional experience working on various Research and Development projects, related to Embedded systems design, PCB Designing, Circuit designing, Schematics, Prototype development, DFM Services, this includes Hardware and Software Development of the products. My Areas of Expertise are: 1. Designing of Embedded Solutions and complete development of prototypes 2. Software & Hardware Development of products. 3. Schematic Design, PCB Design, and Manufacturing. 4. Designing Battery based Low Power Solutions 5. LED lighting solutions. 6. Wearable and Medical Devices. 7. PCB Troubleshooting 8. Procurement, Component Sourcing & BOM. 9. Circuit Simulation and Detailed Analysis Language & Development Platforms: I have worked on various programming languages, development environments & tools 1) Arduino (ATmega328-P, ATmega-2560, ATmega32U4, AT-tiny85), 2) PIC microcontrollers (PIC32MX,PIC10F) , MPLAB, MiKro C Pro 3) KEIL, IAR , STM32CUBE , STM32, STM8, STM32MP 4) Model Sim, Verilog HDL, and Xilinx 5) Altium, Easy EDA, Proteus , LT Spice. Embedded Communication Protocols: I2C, SPI, UART, Wireless Communications (Bluetooth, BLE, Wi-Fi, RF, RFID, IR) Hardware 1) SMD Components Soldering 2) Signal Analysis using Oscilloscope 3) PCB Reviewing 4) Circuit Debugging 5) Circuit Design on Strip Boards. 6) Development of prototypes. Management 1) Time Management 2) Good Communication Skills 3) Component Sourcing, Getting PCB Quotations 4) Project Management 5) Procurement.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Arduino Firmware
    Microcontroller Programming
    Internet of Things
    PCB Design
    ESP32
    GSM
    Electronics
    STM32
    Altium Designer
    Hardware Design
    Firmware Programming
    Multilayer PCB
    LoRa
    PIC Programming
    Electronic Circuit Design
    C++
    Embedded System
    Rapid Prototyping
    Product Design
  • $25 hourly

    • 5.0/5
    • (8 jobs)
    Hello! I am an embedded systems engineer with over 3 years of experience in designing, developing, and integrating complex embedded systems and IoT solutions. Specializing in END-TO-END PRODUCT DEVELOPMENT, my expertise spans from hardware-level development to web and mobile applications, ensuring a comprehensive approach to your project needs. Key Skills: ✔️ Programming Languages: C, C++, Embedded C, Rust, Embedded Rust, Python ✔️ Embedded Systems / IoT: ARM, AVR, ESP32, STM32, UART, SPI, I2C, CAN, BLE, Wi-Fi, Zigbee, LoRa, MQTT, HTTP, Modbus, RTOS, FreeRTOS, Firmware Development, Embedded Software, Embedded Linux, Yocto Project, Robot Control ✔️ Additional Skills: Git, SVN, CI/CD, Docker, GCP, AWS, PCB Design (Altium Designer), IIoT, RESTful APIs, Network Programming, Cross-compilation, Cybersecurity, Automation Scripts, Hardware Drivers, Tracking and Identification, Chromium and CEF, Robotics Services Offered: 🚀 Embedded Linux and RTOS Development 🚀 Firmware Development and Optimization 🚀 Hardware and PCB Design 🚀 IoT Solutions Development (6LowPAN, ZigBee, Z-Wave, Bluetooth, Sigfox, LoRa) 🚀 Cross-Compilation and Cybersecurity Implementation 🚀 Automation Scripts and Hardware Drivers 🚀 Web and Mobile Application Development for Embedded Systems 🚀 Robotics and Automation Solutions Project Highlights: 🔧 Monitoring Systems for Co-working Spaces: Developed using ESP32, PoE, and UWB technologies, achieving 95% accuracy in indoor localization. 🔧 Automated Marketing Caller Systems: Integrated Generative AI to increase marketing outreach efficiency by 40% and customer engagement by 25%. 🔧 One-Click ESP32 Flasher Tool: Reduced flashing time by 50%. 🔧 Access Control Systems: Enhanced security, reliability, and robustness by 30%, integrating Fingerprint Sensor, BLE, and RFID technologies. 🔧 Charging Station Firmware: Developed for 28 Li-ion batteries, improving monitoring and control by 25% using INA226 sensors, CAN communication, HTTP for updates, and MQTT for data posting. 🔧 Chess Playing Robotic Arm: Achieved a 90 Hello! I am an embedded systems engineer with over 3 years of experience in designing, developing, and integrating complex embedded systems and IoT solutions. Specializing in end-to-end product development, my expertise spans from hardware-level development to web and mobile applications, ensuring a comprehensive approach to your project needs. Key Skills: ✔️ Programming Languages: C, C++, Embedded C, Rust, Embedded Rust, Python ✔️ Embedded Systems / IoT: ARM, AVR, ESP32, STM32, UART, SPI, I2C, CAN, BLE, Wi-Fi, Zigbee, LoRa, MQTT, HTTP, Modbus, RTOS, FreeRTOS, Firmware Development, Embedded Software, Embedded Linux, Yocto Project, Robot Control ✔️ Additional Skills: Git, SVN, CI/CD, Docker, GCP, AWS, PCB Design (Altium Designer), IIoT, RESTful APIs, Network Programming, Cross-compilation, Cybersecurity, Automation Scripts, Hardware Drivers, Tracking and Identification, Chromium and CEF, Robotics Services Offered: 🚀 Embedded Linux and RTOS Development 🚀 Firmware Development and Optimization 🚀 Hardware and PCB Design 🚀 IoT Solutions Development (6LowPAN, ZigBee, Z-Wave, Bluetooth, Sigfox, LoRa) 🚀 Cross-Compilation and Cybersecurity Implementation 🚀 Automation Scripts and Hardware Drivers 🚀 Web and Mobile Application Development for Embedded Systems 🚀 Robotics and Automation Solutions Project Highlights: 🔧 Monitoring Systems for Co-working Spaces: Developed using ESP32, PoE, and UWB technologies, achieving 95% accuracy in indoor localization. 🔧 Automated Marketing Caller Systems: Integrated Generative AI to increase marketing outreach efficiency by 40% and customer engagement by 25%. 🔧 One-Click ESP32 Flasher Tool: Reduced flashing time by 50%. 🔧 Access Control Systems: Enhanced security, reliability, and robustness by 30%, integrating Fingerprint Sensor, BLE, and RFID technologies. 🔧 Charging Station Firmware: Developed for 28 Li-ion batteries, improving monitoring and control by 25% using INA226 sensors, CAN communication, HTTP for updates, and MQTT for data posting. 🔧 Chess Playing Robotic Arm: Achieved a 90% accuracy rate in move execution with strategic algorithm implementation. 🔧 IoT Core Library for ESP32: Demonstrated IoT expertise, improving system integration by 25%. Achievements: 🏆 Best Mechanical Design Award in National Engineering and Robotics Contest 2022 🏆 Over 30 Completed Projects in Embedded Systems and IoT Solutions Why Choose Me: 🌟 Holistic Knowledge: From hardware design to web and mobile application development, ensuring a seamless integration of all components. 🌟 Proven Track Record: Successfully led projects from conception to completion, optimizing functionality and enhancing efficiency. 🌟 Client Satisfaction: My priority is to deliver quality work on time and within budget, fostering long-term relationships. Let’s Collaborate: Trusting me with your project means getting the job done fast and prop
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Altium Designer
    PCB Design
    ESP32
    STM32
    Internet of Things Solutions Design
    Embedded System
    Arduino
    Microcontroller Programming
    Electronic Design
    Internet of Things
    Raspberry Pi
    Electrical Engineering
    Circuit Design
  • $8 hourly

    • 5.0/5
    • (8 jobs)
    I'm an electrical engineer with expertise in MATLAB, ETAP, PLC programming, PCB design, and firmware development. I can handle projects in signal processing, control systems, power systems analysis, communication systems, and embedded systems. My proficiency in MATLAB and other design and firmware tools helps me tackle complex challenges efficiently. I'm also skilled in C++, Python, Computer System Engineering, and SolidWorks, making me versatile. Whether you need help with MATLAB scripting, PCB design, firmware development, web development, or technical writing, I'm here to assist. I'm also experienced in PLC programming and automation. Feel free to reach out for guidance in any of these areas.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Raspberry Pi Firmware
    Raspberry Pi
    Proteus Design Suite
    EasyEDA
    Microcontroller
    PCB Design
    Arduino IDE
    Arduino
    C++
    MATLAB Script
    Python
    ETAP
    Simulink
    MATLAB
    Electrical Engineering
  • $30 hourly

    • 5.0/5
    • (6 jobs)
    I am a Managing Director at Maanz AI and I have a team of Embedded Engineers with 5+ Years of experience in Embedded software development. We have extensive experience and offer wide range of solutions in Embedded product development, AUTOSAR and python automation. At Maanz AI, we use our expertise in embedded systems for custom software development, firmware development, or hardware design services. We deliver exceptional results on time and within budget. Reach out to us so that we can discuss your ideas/projects and give them a practical shape.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Python Script
    Selenium
    Data Scraping
    Data Extraction
    PCB Design
    Data Mining
    Project Management
    Microcontroller
    Arduino IDE
    Firmware Programming
    STM32
    Raspberry Pi
    Arduino Firmware
    C++
  • $10 hourly

    • 4.7/5
    • (2 jobs)
    I'm Safee Ullah, holding a BS in Electrical and Biomedical Engineering and have 5 year of freelancing experience and currently pursuing a master's in IT. With a strong foundation in both fields, I offer expertise in electrical, electronics, and biomedical engineering projects. I am committed to delivering high-quality solutions, whether it involves designing circuits, developing systems, or integrating biomedical technology. My goal is to provide precise, innovative, and reliable results, ensuring that your project meets its objectives efficiently.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Electrical Design
    Electrical Engineering
    Electronics
    Electronic Circuit Design
    Printed Circuit Board
    Circuit Diagram
    Analog Circuit
    Circuit Design
    3D Design
    Schematic
    Autodesk AutoCAD
    MATLAB
    NI Multisim
    PCB Design
    Proteus Design Suite
  • $10 hourly

    • 5.0/5
    • (10 jobs)
    Hello, my name is ShahidUllah Jan and I am an experienced electronics engineer with a unique set of skills. I specialize in embedded system design, IoT product development, PCB design, and Android app development. What sets me apart from other freelancers in my field is my ability to connect IoT products to websites and Android apps, providing a seamless and user-friendly experience for my clients. Over the past five years, I have worked on a variety of projects in the IoT industry. I have designed and developed IoT products for home automation, smart agriculture, and industrial automation, and have successfully integrated these products with websites and Android apps. I have also designed multilayer PCBs using Altium Designer, and have experience in firmware development and software integration. My unique speciality lies in my ability to provide end-to-end solutions for my clients, from hardware design to firmware development and software integration. Whether you need an IoT product designed from scratch, or need to integrate an existing product with a website or Android app, I have the skills and experience to deliver high-quality work that meets your needs. If you are looking for a reliable and experienced freelance engineer to help with your IoT project, please feel free to contact me. I would be happy to discuss your project requirements and provide a customized solution that meets your needs.
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    Digital Electronics
    Analog Circuit
    Proteus Design Suite
    Circuit Design
    Flutter
    Kotlin
    Java
    Android App
    Altium Designer
    Microcontroller Programming
    Internet of Things
    Multilayer PCB
    Visual Basic
    Arduino
    ESP32
    C#
    Windows App Development
    PCB Design
    ESP8266
  • $35 hourly

    • 0.0/5
    • (3 jobs)
    Hi, I have 20+ years of PCB layout experience with programs like Altium, Orcad PCB Editor, Eagle, KiCad, and a few others. I have experience in circuit engineering, programming Arduino, ESP8266, ESP32, STM32, NRF52, Attiny boards. I am experienced in: Altiun Designer SolidWorks Protel, PCAD STM32CubeMX Keil, IAR, True Studio, CooCox, AVRStudio SolidCAM, Power Mill ADSimPLL MicroWave Office MicroCap Programming languages: C, ASM Standards and technologies: UART, SPI, I2C, USB, RS232, RS485, BT.656 OLED, LCD, TFT, BLE, MIMS, GPS, RFID I have a solid knowledge of C and C ++, experienced in electronics and embedded systems (from both hardware and software sides). Thanks for visiting my profile. Regards, Usman Ahmad
    vsuc_fltilesrefresh_TrophyIcon PCB Layout
    STM32F4
    PCB Design
    Arduino Firmware
    Electronic Circuit Design
    Proteus Design Suite
    Arduino
    Circuit Design
    nRF52
    STM32
    Raspberry Pi
    Raspberry Pi Firmware
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a PCB Layout Freelancer near Islamabad, on Upwork?

You can hire a PCB Layout Freelancer near Islamabad, on Upwork in four simple steps:

  • Create a job post tailored to your PCB Layout Freelancer project scope. We’ll walk you through the process step by step.
  • Browse top PCB Layout Freelancer talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top PCB Layout Freelancer profiles and interview.
  • Hire the right PCB Layout Freelancer for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a PCB Layout Freelancer?

Rates charged by PCB Layout Freelancers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a PCB Layout Freelancer near Islamabad, on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance PCB Layout Freelancers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream PCB Layout Freelancer team you need to succeed.

Can I hire a PCB Layout Freelancer near Islamabad, within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive PCB Layout Freelancer proposals within 24 hours of posting a job description.

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.