Upwork home
Sign up
Secondary

Hire the best Stm32 Freelancers in Rawalpindi, PK

Check out Stm32 Freelancers in Rawalpindi, PK with the skills you need for your next job.
Hire freelancers
  • $50 hourly

    • 4.6/5
    • (24 jobs)
    An Electrical Engineer Having experience of an R&D firm as Embedded Systems and PCB Design Engineer for 5+ years. I have experience in Wearable devices, Bio Medical devices,Low power systems, Consumer Electronics and many other Embedded fields. I am capable of designing any technical idea from scratch to a complete working prototype. Always open for innovative discussions Areas of Expertise are , 1. Electronics Design 2. Software Development 3. Hardware Development 4. Schematic and PCB Design and Manufacturing 5. DC Power Solutions 6. DC Motors (Servo,Stepper) 7. BMS(Battery Management Systems) 8. LED lightning solutions 9. Wearable Devices 10. Medical Devices 11. PCB Troubleshooting 12. BOM and Component Sourcing 13. Circuit Analysis 14. Wireless Communications(Bluetooth,BLE,WiFi,RF , RFid,IR, 4G, NB-IOT,LORA) 15. PCB Design, PCB layout Tools and Development platforms familiar with, 1.IAR,KEIL,STM32CUBE( STM32,STM8,STM32MP,STM32L,STM32F1) 2. Arduino, (ATmega328pb, Atmega2560, Attiny85) 3. MPLAB, Micro C pro (PIC32MX,PIC10F) 4.Mbed(LPC1768) 5.NRF9160 6. ALTIUM, EAGLE 7. LTspice, Porteous 8. NRF52832/NRF52840 9.LSM110A 10.STM32L476RGT6 11. LR1110
    vsuc_fltilesrefresh_TrophyIcon Stm32
    nRF52832
    Wireless Communication
    Arduino
    Internet of Things Solutions Design
    BLE
    Altium Designer
    Embedded System
    Prototyping
    Arduino Firmware
    Hardware Design
    STM32
    PIC Programming
    Product Design
    PCB Design
  • $20 hourly

    • 4.8/5
    • (7 jobs)
    I am a passionate, precise and results-oriented hardware engineer with a focus on electronic systems with deep experience in all practical aspects of product design. I enjoy working on complex and diverse projects with different applications such as industrial, automotive, IoT, and medical sectors. Services: • Electronic/Hardware product design, including but not limited to system design, component selection, schematic drawing, PCB layout & routing, reviewing, and troubleshooting. • Prototyping, assembly and validation of boards with up to hundreds of SMD components with their own tools and equipment. • Advising on project feasibility, cost estimations. • Arranging turnkey manufacturing, helping with scaling a prototype into mass manufacturing, and dealing with 3rd parties such as PCB plants, component suppliers, test laboratories, machining, and injection molding shops. Skills: • Multi-layer PCB design with up to 10 layers • Mixed signal design with high speed interfaces such as Gigabit Ethernet, USB FS/HS, HDMI, DRAM, LVDS and others. • Analogue design with dedicated IC’s and discrete components. • Digital design with discrete logic gates, microcontrollers of any variety, and FPGA, CPLD, and System On Chip (Zynq 7010/7020) • Rendering of PCB’s and assembled products for presentation purposes • Embedded software with C/C++, Verilog, and computer firmware/driver development.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Electronics
    AWS IoT Core
    Xilinx
    Microcontroller
    FPGA
    Altium Designer
    Embedded System
    Embedded C
    PCB Design
    STM32
    Firmware
    ESP32
    Bluetooth
    nRF52
    C++
  • $60 hourly

    • 4.8/5
    • (71 jobs)
    ✅ TOP RATED PLUS 🏆🏆🏆 with over 6000 Hours of work experience on Upwork ✅ More than 18 year experience 🎖️🎖️🎖️ of working with different Embedded system projects ✅ Feel free to discuss your project requirements in detail. I can assist you in design, development, production and commissioning of the complete project including the components selection. ✅ You can also contact me for your existing project with issues to be resolved. Fixing bugs and improve performance is my most favourite job. ✅ Vast experience of working with 🟨 🔧📦Bug Fixing for existing Embedded systems and improve firmware 🟨 Raspberry Pi , Orange Pi, Banana Pi, Jetson Nano, Rock Pi and various other Embedded Linux and Windows SoC boards 🟨 Python, Node js, Node-Red programming in Embedded Systems 🟨 Yocto, BalenaOS, Full stack developer for Embedded Systems 🟨 Embedded systems configuration management 🟨 Industrial Automation, Home Automation 🟨 PLCs (Beckhoff, Siemens, Allen Bradley, ABB, Mitsubishi, Omron, Delta, Fatek) 🟨 Robotics, Motor Control (AC, DC, Servo, Stepper, NEMA, Linear Actuator 🟨 STM, Arduino, ESP32, ESP8266 🟨 RF, nRF52832, nRF52840, nRF53, Texas Instruments 🟨 DevOps, Jenkins, Ansible, Terraform 🟨 AWS, Azure, Google Cloud GCP, IoT 🟨 DSP 🟨 FPGA, CPLD (Xilinx, Altera) 🟨 Modbus, CAN, RS485, RS232, UART, Wi-Fi, BLE, LoRa, ZigBee, PCI, SPI, I2C, USB, Bluetooth, Serial, Parallel, Ethernet 🟨 Data Acquisition Systems 🟨 OpenWrt
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Embedded C
    Firmware
    Amazon S3
    STM32
    ARM Cortex-M
    Raspberry Pi
    Robotics
    Integrated Circuit
    Arduino
    PCB Design
    Git
    Electronics
    CC2650
    Embedded System
  • $30 hourly

    • 4.8/5
    • (4 jobs)
    I have been in field for almost 10 years, since I graduated I have been in the field. I had the experience of working of many different projects, including Electronics and electrical, systems. During this time I had the chance to work on Mechatronics, industrial automation, and consumer projects as well. None of my work has been easier than the last I have always loved to challenge myself and that drives keeps me going. I have vast knowledge in embeded system designs, PCB Designing, I am very fluent with Altium designer, Eagle Cad, Microsoft visual, Arduino, Atmel, Microchip and STM32 platforms.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Microcontroller Programming
    WiFi
    Microsoft Excel
    Copywriting
    STM32
    Altium Designer
    Autodesk Fusion 360
    Electronic Design
    Eagle
    Mechatronics
    Arduino Firmware
    PCB Design
    Circuit Design
    Arduino
    Mechanical Design
  • $20 hourly

    • 5.0/5
    • (1 job)
    I'm an embedded system designer and have experience over 7+ year. I designed multiple commercial products from idea to production. I’m a good team player and easy to communicate with. I’m very expert in taking rough ideas/concept into real world products and accepts challenges. Have the capabilities to solve complex problems into simple solutions. I’m capable in designing products with minimum cost and hassle. I love to take on challenges and solve problem through dedication and hard work. + Altium designing + Kicad + Internet of things. + Smart home. + Electronics design. + Embedded System Design. + Hardware/Software integration. + Firmware Development. + Library developments. + 8/32-bit microcontroller Programming. + Arduino Programming. + Pic Microcontroller Programming. + ESP32 & ESP8266 interfacing. + Schematic Designing. + STM32 Series programming. + C/C++ programming + Python Programming + C#/VB application development. + Hardware Troubleshooting & design improvements. + Real Time Operating Sys. (RTOS) + Over the Air (OTA) protocol. + Wireless integration (BLE, WIFI, lora). + communication Protocol (SPI, UART, I2C, one Wire, RS485 etc.) + DC/DC design for different Application. + 1KV Power Supply design. + Reverse Engineering. + Wireless Communication (GSM, Zigbee). + Encryption/Decryption AES128/256 schema + RFID/Biometric Based solution Development. + Raspberry Pi + beagle bone + Schematic Simulation. + ADC/DAC applications. + Schematic Design Improvement.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Electronics
    Python
    ESP8266
    ESP32
    AVR Microcontroller
    STM32F4
    STM32
    Arduino Firmware
    PIC Programming
    C
    C++
    Firmware Programming
    Firmware
    Electronics
    Embedded System
  • $13 hourly

    • 5.0/5
    • (5 jobs)
    I am an Enthusiastic Electrical Engineer and a true believer in future technology, I can build products and complete projects for you in the field of electrical and electronics from ground, specifically regarding to Embedded system and power electronics, furthermore I can provide my services in following fields: • 32-bit microcontroller(ARM,ESP 32) • 8-bit microcontroller(PIC, Arduino) • Digital Circuits • Power Electronics • Automation(CNC) • Space Vector PWM • IOT • CNC embroidery machine circuits and software packages. • User interface circuits • Timing Circuits • Microcontroller Based Modules • Altium/Eagle and Proteus PCB design • Self testing and Validation of proposed Solutions Above all your satisfaction is true validation of my efforts. Thanks for your time. Feel free to contact me for any information.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    CNC Programming
    Functional Testing
    Embedded C
    Electronic Design
    Power Electronics
    Electrical Engineering
    Automation
    PCB Design
    Robotics
    STM32
    PIC
    ESP32
    Arduino
    Embedded System
  • $20 hourly

    • 4.8/5
    • (8 jobs)
    I will provide you with commercial level firmware for stm32 ESP32 and Arduino boards using sensors actuators and communicating using wireless technologies (Wi-Fi, GSM, BLE, LoRa, LoraWAN etc.) or wired technologies (UART,RS232, I2C ,SPI , RFFE etc.) Here are some of my previous work that is dominating the IoT and electronics' market. Projects: Trap Alert Device: (Detects animal trap and send alarm to user using NB IOT technology) Utilizes NB-IOT communication with a SIM7070G and an STM32L051K6 MCU Implements low power modes, including stop 2 mode, achieving deep sleep power consumption as low as 2 µA Battery life of up to 2 years on a single battery cycle Contributed complete firmware development and PCB modifications to the project Impact Sentinels : Designed the project for Inglas Products in Germany Utilized STM32WLJC microcontroller, LoraWAN, and Sub-GHz communication protocols Developed with the goal of improving human life safety, particularly in rock fall detection Implemented low power modes, allowing for a battery life of up to 2 years Contributed to firmware upgrade development for the project Sludge Meter : (Prevents Sludge pipe explosion by constantly measuring the sludge in a pipe and sending alarms as soon as its blocked ) Designed and developed a Sludge Meter project utilizing an ESP32 microcontroller Utilized water level sensors and magnetic current sensors to detect sewage blockages Sent a message to the user via WIFI communication when a blockage was detected Project was critical for ensuring proper sewage management and avoiding blockages Implemented on an ESP32 microcontroller with Wi-Fi communication protocols Contributed to both hardware and firmware development for the project. BLE Controlled TOIOs : Developed a project to control 5 TOIO mini robots using BLE communication from an ESP32 microcontroller Implemented functionality to get device information from the robots Implemented control of speed, direction, lights, and sounds of the robots via the ESP32 and BLE communication Project was designed to showcase the capabilities of BLE communication and microcontroller-based control Utilized the ESP32 microcontroller for BLE communication and control. BLE controlled TOIOs(mini robots) Controlling 5 robots using BLE from ESP32 Getting device info + controlling speed, direction, lights, sounds Smart Room Implementation using FreeRTOS(Embedded System Design) Wireless Communication of Microcontrollers using HTTP Multithreading Using FreeRTOS Dual Axis Intelligent Wireless PV Tracker (FYP) Tracking about two axis Cloud integration + sensors interfacing Android application Here are my technical details: I am an experienced Electrical Engineer specializing in Embedded Systems, with a strong educational background from Pakistan's top engineering university, NUST. I have gained valuable practical experience through work with various companies and freelancing projects, and my skills include firmware development, PCB designing, and consulting for electronics product development.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Embedded System
    STM32
    PCB Design
    Embedded Application
    Microcontroller
    FreeRTOS
    Firmware Programming
    Electronic Circuit Design
    Circuit Design
    Wireless Communication
    ESP32
    Sensor
    LoRa
    Arduino
    Arduino Firmware
  • $20 hourly

    • 4.8/5
    • (6 jobs)
    I'm a Mechatronics Engineer having an experience in Electronics and Programming fields with expertise in Circuit designing and Microcontrollers programming . I have worked on Circuits Schematics and PCB Designing, Circuits Reverse Engineering, Microcontrollers like STM32, ESP-32, Arduino, and Raspberry PI.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Linux
    PCB Design
    Embedded System
    Arduino
    Proteus Design Suite
    Firmware Programming
    C++
    Python
    Internet of Things
    Microcontroller Programming
    Raspberry Pi
    ESP32
    STM32
    Electronics
    FreeRTOS
  • $30 hourly

    • 2.1/5
    • (20 jobs)
    With 5+ years of experience and specialization in Real-Time Embedded Systems, I can help you with firmware development and circuit design. My biggest strengths are: - Embedded C/C/C++ and Python Programming Development - Microcontrollers / Microprocessors bare-matel Programmming (from ARM to Arduino). - IoT Development (Including ESP8266, ESP32, LoRa, etc.) - PCB Designing (Altium Designer, Proteus, Eagle, etc.) - Electrical and Electronics Projects implementation - Embedded Devices integration and Programming - Electronic Circuits Design - Microcontroller Programming optimization I'm a expert in Software and Hardware and have deep knowledge in how to integrate both.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    nRF52
    Python
    Firmware Programming
    ARM Microcontroller
    Electronic Circuit Design
    Embedded C
    C
    Electronics
    Electrical Engineering
    Internet of Things Solutions Design
    Verilog
    STM32
    Arduino
    Microcontroller Programming
    Embedded System
  • $15 hourly

    • 0.0/5
    • (0 jobs)
    Hi, I am Muhammad Ameer Hamza, Experienced Electrical Electronic Engineer with a demonstrated history of 4 years experience working in the field of Embedded and R&D Departments. A confident Embedded Systems Engineer able to impart complex information to audience of all levels .Seeking of a supervisory role .Experienced in leading the team .I believe in dignity, honesty, team work and commitment and always motivated and motivate others. Always strive for improvement and try my best standard of my field able to handle multiple tasks and use creative approach to solve problem. Energetic and eager to learn new skills. Skills: • Embedded System Designing (Hardware/Software) • PCB Schematic and Layouting (Altium/Proteus) / PCB Reverse Engineering and Rectification • Circuit Analysis • Analog/Digital Ciruit Design •Altium/Eagle/KiCad Designer •Schematic Capture •Power Electronics • Firmware development and C/C++ Programming for Microcontrollers (Arduino, Atmel, ESP, STM, NRF52, PIC) over Arduino, Platform IO, and STM32Cube IDE’s, MPLAB, Segger Studio, Eclipse • Familiarity with GitHub and Git Source Control • Familiarity with communication and networking protocols I2C, SPI, UART, MODBUS, • CANBUS, Wi-Fi, BLE, Bluetooth Classic, TCP/IP, UDP, HTTP, MQTT, AWS etc. • Circuit Designing and Simulations • Familiarity with debugging tools Function Generator, Oscilloscope, Logical Analyzer, Spectrum Analyzer, DMM etc. • Power World Simulation for Power System Analysis and Control • MATLAB coding and simulations
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Arduino Firmware
    C
    STM32
    Embedded System
    SolidWorks
    Electronic Circuit Design
    Power Electronics
    Electronics
    Microcontroller Programming
    Reverse Engineering
    Altium Designer
    ESP32
    FreeRTOS
    PCB Design
    C++
    Multilayer PCB
  • $10 hourly

    • 0.0/5
    • (0 jobs)
    I am a dedicated professional with nearly 2 years of experience in the dynamic domains of Embedded Systems and Robotics. My expertise encompasses firmware development for a range of embedded platforms like ESP32, NRF, Arduino, and flight controllers. Furthermore, I have hands-on experience with various IoT frameworks, such as ESP IDF, and real-time operating systems including FreeRTOS and Zephyr RTOS. Moreover, my skill set extends to experience in both wired and wireless communication protocols, including BLE Mesh and AWS MQTT.
    vsuc_fltilesrefresh_TrophyIcon Stm32
    Computer Vision
    Python
    C++
    Embedded Linux
    Arduino
    STM32
    nRF52
    MQTT
    Bluetooth LE
    ESP32
    FreeRTOS
    Embedded Operating System
    Embedded System
    Embedded C
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job (it’s free)

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Stm32 Freelancer near Rawalpindi, on Upwork?

You can hire a Stm32 Freelancer near Rawalpindi, on Upwork in four simple steps:

  • Create a job post tailored to your Stm32 Freelancer project scope. We’ll walk you through the process step by step.
  • Browse top Stm32 Freelancer talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Stm32 Freelancer profiles and interview.
  • Hire the right Stm32 Freelancer for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Stm32 Freelancer?

Rates charged by Stm32 Freelancers on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Stm32 Freelancer near Rawalpindi, on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Stm32 Freelancers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Stm32 Freelancer team you need to succeed.

Can I hire a Stm32 Freelancer near Rawalpindi, within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Stm32 Freelancer proposals within 24 hours of posting a job description.

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.