Routerboard Jobs

11 were found based on your criteria {{ paging.total|number:0 }} were found based on your criteria

show all
  • Hourly ({{ jobTypeController.getFacetCount("0")|number:0}})
  • Fixed Price ({{ jobTypeController.getFacetCount("1")|number:0}})
Fixed-Price - Expert ($$$) - Est. Budget: $300 - Posted
MileStone 1: Must be able to begin tomorrow Wednesday 24 AUGUST @ 4PM PST. RemoteSite1 has a Mikrotik RB750 connecting with Dual WAN failover VPN to a single WAN RB1100 (MainSite). Remove this RB750 and re-establish IPSEC (or desired VPN) traffic between 192.168.22.0/24 (remote site) and 192.168.1.0/24 (main site). This temporary connection will be for 24 hours or less and should failover over between RemoteSite1WAN1-->MainSite & RemoteSite1WAN2 & MainSite should be the backup. Once complete and failover is tested, MileStone 1 will be released. USG Pro in RemoteSite perform as NAT/Firewall/DHCP/DNS forward etc. These features should be migrated to the USG Pro. MIleStone 2: To be started at 5PM PST 25AUG16 Replacing MainSite RB1100 with Unifi USG Pro firewall. Remove the configuration from MileStone 1 at RemoteSite 1 USGPro, and configure (2) USG Pros to communicate via native VPN connection in controller. Upgrade AWS EC2 controller from current 4.8.20 version to 5.0.7 (only if required). RB1100 does not perform DHCP at MainSite. We utilize ShoreTel Switches at RemoteSite and MainSite and the traffic between these IPs should be prioritized via QoS. USG-USG VPN should failover if one of the connections at RemoteSite1 goes down. Milestone 2 will be released when these items are complete.
Skills: Mikrotik RouterBOARD IPsec Mikrotik RouterOS Ubiquiti
Fixed-Price - Intermediate ($$) - Est. Budget: $50 - Posted
Configure Mikrotik router: 1: IP POOL ( configure as accidentally deleted) 2: to Use a VPN on another MikroTik RouterBOARD RB2011 3: Set 8 Lan IP's to route via the VPN
Fixed-Price - Intermediate ($$) - Est. Budget: $1,000 - Posted
Temas del curso: Introducción • MikroTik, RouterOS, RouterBoard, Winbox & MAC-Winbox, Webfig, Quickset • Interfaz de Línea de Comandos (CLI), SSH, Telnet, New Terminal • Configuración inicial (Internet), DHCP-client, Default Gateway, Firewall Básico, NAT masquerade • Actualización del RouterOS, actualización del firmware/RouterBOOT + Netinstall • Administrar Login, Servicios, Respaldos (backup y export) • Licenciamiento RouterOS, niveles, actualizaciones Ruteo (Routing) • Conceptos de ruteo + ejercicios.
Skills: Mikrotik RouterBOARD Mikrotik RouterOS
Hourly - Intermediate ($$) - Est. Time: Less than 1 week, 10-30 hrs/week - Posted
I'm looking for a network specialist to interconnect two networks with Cisco / Mikrotik or better proposal. Let me explain the attached file where you can check the problem and the goal I would like you can reach. Currently we have connected 4 offices in different cities throught private network of ISP Y. All offices can reach servers in city A. I can't check routing information inside the cisco routers in any office, due to the fact that routers belong to ISP Y, besides ISP Y takes too long to give me information about configuration or support when we have problems with interconnection between offices. So we decided to change to ISP X who would give us the service of interconnection between our offices. But there is a problem, City D is far away, so ISP X would take around 2 months to place its router in city D. In cities A, B and C, ISP X have alredy setup its router, so we could migrate city A, B and C and they would be interconnected between them. Nevetheless, as City D is going to take 2 months to have a router from ISP X, we are thinking to keep service with ISP Y so that City D can reach main office in city A where are the servers. But when packets arrives from city D to city A, they would be looking for ips of servers, but servers are in network of ISP X. By the way, routers from ISP X and ISP Y on city A are in the same room. I can't connect a cable between switch of ISP X and ISP Y, due to the fact that I would have 2 gateway with the same ip address 10.1.10.1. Besides, I can't make any change on routers of ISP Y, as I said, they have very very bad support, they would take years to add a static route. My idea to interconnect both networks and make possible that City D can reach servers on Network of ISP X woudl be the following: Configure router mikrotik 1 with ip of the servers, resend packet to next step (Router mikrotik 2) and then introduce packet to the network where servers are. In routers of ISP X, it's possible to ask ISP X to add a static route so that servers can reach network in city D 10.4.0.0/16 Another idea would be to access to router cisco from ISP Y in City A and change routing, but I don't have password of the router, as I say, it belongs to isp Y. But if you know how you can access to router and change routing, it would solve the issue soon. In summary, I need a networks experienced specialist who can make office in City D reach servers in City A taking into account the drawbacks I explained previously. By the way, I just gave some ideas to solve the issue, don't know if it would work well, but if you have a better proposal let me know. Please, avoid copy and paste curriculum as your answer, I would like to know more about your propose about this project. Remember I can read your curriculum in your freelancer profile. Thank you so much for your attention Robert
Skills: Mikrotik RouterBOARD Cisco Certified Internetwork Expert (CCIE) cisco routers Mikrotik RouterOS
Hourly - Entry Level ($) - Est. Time: More than 6 months, 30+ hrs/week - Posted
Our services include a proprietary asterisk-based hosted VoIP service for our customers, as well as internet access. The majority of our customers use Mikrotik Routerboard hardware as their edge device. We are looking for a Tier1 support representative with an excellent command of the English language (written and oral) who can provide first level support and remote training for our customers.
Skills: Asterisk English Mikrotik RouterOS Network Administration VOIP Administration VOIP Software