Realbasic Jobs

1 were found based on your criteria {{ paging.total|number:0 }} were found based on your criteria

show all
  • Hourly ({{ jobTypeController.getFacetCount("0")|number:0}})
  • Fixed Price ({{ jobTypeController.getFacetCount("1")|number:0}})
Fixed-Price - Expert ($$$) - Est. Budget: $1,000 - Posted
We need a Software that converts simple ASCII Commands to Onvif Camera control commands. An Onvif Application Programmers Guide is available here: http://www.onvif.org/Portals/0/documents/WhitePapers/ONVIF_WG-APG-Application_Programmer%27s_Guide.pdf We need the following commands: CameraIP IPAddress (a parameter that determines the IP Address of the Camera. It is not necessary to change the IP Address, this parameter only tells the software what IP Address to user for the camera) CameraPort Port(as above, this command does not change the port the camera is listen to, it only tells the software what port to use) Login username password (the login is needed to control the camera) SetPan 0..360° GetPan (return Pan value) SetTilt 0-360° GetTilt (returns Tilt Value) SetZoom 0..100% GetZoom (returns Zoom value) The software has to accept the ASCII commands via TCP, converts them into Onfiv and send them out. The software has to give a feedback if the command was successful. This is the camera we need to control: https://de.boschsecurity.com/de/master_product/produkte_1/videosystems_1/ipcameras_1/movingcamerasptz_1/micipdynamic7000hd/micipdynamic7000hd_18741 We prefer a multi platform Solution for Windows and Linux coded in Qt / C++ or Xojo We can make the Camera available via Dyndns Service for the contractor.
Skills: Realbasic C++