You've landed at the right place. oDesk is now Upwork. Learn about the new platform.

Electrical Drawing Jobs

14 were found based on your criteria

show all
show all
only
only
only
show all
only
only
only
only
only
show all
only
only
only

Hourly - Est. Time: More than 6 months, Less than 10 hrs/week - Posted
MEP (HVAC,plumbing and electrical) and construction CAD drawings for the engineering company in USA. The candidate MUST be familiar with USA specks.You should be able to perform the following: Heating and Cooling Load calculations Duct Design calculations Model in Autodesk Revit MEP and Autocad MEP Familiar with US constructions standards We pay $10-$12 depending on experience.

Hourly - Est. Time: 3 to 6 months, 30+ hrs/week - Posted
Engineering of a biometric (fingerprint) module incorporating wifi and bluetooth to develop a smart device for use in the consumer and commercial healthcare markets. The design should take advantage of IOT and be able to communicate via wifi over cloud to application(s) on smartphone or tablet. The communication between the phone app and the product will be bi-directional.

Hourly - Est. Time: Less than 1 month, Less than 10 hrs/week - Posted
Hi there, I am looking for a skilled PCB designer to design a custom HDMI driver for 21.5inch LCD panel. The Board must contain (1)one HDMI port and RCA A/V port as well as connections to display and controller board. The picture attached shows the current HDMI driver being used. The customer PCB should be able to control brightness, contrast, etc. Please respond if you have the necessary experience. Thank you.

Hourly - Est. Time: Less than 1 month, Less than 10 hrs/week - Posted
Please forgive if I am not using the correct terms. In the block where I live, we have a communal boiler. I have a hot water cylinder in my apartment which works by heat exchange. Sometimes the communal boiler fails or may even function at a lower than acceptable temperature. I need some sort of monitoring device which we will set to a certain temperature and this will be attached to the flow from boiler pipe (see photo) and if the temperature drops below our set temperature, then it should set the programmer to OFF this way it isolates my water tank from the main boiler. Taking it a step further, it should also turn on the immersions on the tank so that the heat in cylinder is retained and the appartment remains warm. When the temperature returns back to normal, it should automatically turn off the immersions and switch the programmer back on. The immersions are up to 4kw each and there are two of them.

Hourly - Est. Time: Less than 1 month, 10-30 hrs/week - Posted
I have embarked on a robotic TIG welding project, and I need help to develop a programmable power supply for the machine. I am no electrical engineer, but believe that I need a high-frequency IGBT-based inverter capable of approximating the performance of the Miller Maxstar 280 or Lincoln Electric Invertec V270-TP power supplies: - Input voltage: 415 V - Input: 20 A - Phase: 3 - Output mode: CC - Output range: 5 – 270 A - Output duty cycle: 100% at 170 A - High frequency arc start It is imperative that the power supply must be able to respond to commands from the welding machine to control the output current in the same manner as possible with either the Maxstar or Invertec units. That is, it must be capable of producing a current with a controllable ‘upstroke’, ‘pulse’, and ‘downstroke’. As I said; I do not come from an electrical background and require guidance on how to specify and design this power supply to bring my project into fruition. At this stage I am essentially...

Hourly - Est. Time: More than 6 months, 10-30 hrs/week - Posted
You will manually input CAD data (graphics) from existing datasheets into another format. Skills: - You need good attention to detail to make sure that the data is correctly input. - Having basic familiarity with graphics would be helpful (e.g. AutoCAD), but isn't required. - Having experience in electrical design would be helpful, but isn't required. We'll provide training and instruction to help you. This job is on-going. We get requests to input the CAD data, and we have a small team who work to fulfill the requests. This is a good opportunity if you have some time every week to help fulfill the requests.

Hourly - Est. Time: Less than 1 week, 10-30 hrs/week - Posted
Hello! I have a new idea which I would like to bring to reality. This is a new product which I can discuss openly once we have agreed on the fees, however, to be more specific the job is that I would require someone to assist in gathering some initial work such as listing the components necessary for the product along with a price estimate, in addition, to providing a list of major components I would need a rough cost estimate for production quantities and also the rough cost for prototyping. I will also require details on the costs involved for firmware programming and smartphone app programming (however, the latter is not very important if not attainable) I need someone with an electrical engineering background, who is very familiar with bluetooth and m2m related modules and components, and someone who is aware of the latest technologies available. The concept and objective of the product are available, and I would like to know if this is something can be achievable or...

Hourly - Est. Time: Less than 1 week, Less than 10 hrs/week - Posted
MUST HAVE autocad 2015 and know how to use it DO NOT APPLY unless you have this I would like someone to convert hand drawings to auto cad 2015. I would also like to get some help and training from this person via skpe in the use of auto cad 2015. Work would be on going. I have both fixed price work and hourly rate work. Person must be able to speak good English.

Hourly - Est. Time: More than 6 months, Less than 10 hrs/week - Posted
I am an electrical design engineer located in South Florida looking for drafting support for some of my electrical design packages. This drafting support would consist of creating electrical drawings, floor plans, site layouts, etc..