Arduino Jobs

50 were found based on your criteria {{ paging.total|number:0 }} were found based on your criteria

show all
  • Hourly ({{ jobTypeController.getFacetCount("0")|number:0}})
  • Fixed Price ({{ jobTypeController.getFacetCount("1")|number:0}})
Fixed-Price - Intermediate ($$) - Est. Budget: $30 - Posted
However, I know for someone with any amount of actual experience, it should be a breeze. All I need is for my Arduino to control a solenoid water valve to be on a simple timer. ... I would just need you to write the code to tell it to open the solenoid twice a day for a short length of time, and then I would need further instructions on all hardware required to make it all come together. I already have an Arduino Uno, some hardware that came with the kit and the solenoid valve.
Skills: Arduino C++ Circuit Design
Fixed-Price - Expert ($$$) - Est. Budget: $2,000 - Posted
Looking for an experienced developer to make it possible to upload sketches to a custom PCB directly from the Arduino IDE. The board uses the same chip as the Teensy 3.1/3.2 board (i.e. the ARM MK20DX256 MCU). ... The board can already accept firmware built with Teesnyduino if it is converted to a bin file, but uploading to the board via micro-USB from the Arduino IDE does not work on Windows or OSX. The right candidate has experience with bootloaders (bootloader code will be provided) and has added custom board profiles to Arduino before. ... The right candidate has experience with bootloaders (bootloader code will be provided) and has added custom board profiles to Arduino before.
Skills: Arduino C CodeWarrior Hardware Troubleshooting
Fixed-Price - Intermediate ($$) - Est. Budget: $200 - Posted
Hi all, I'm desesperate to make work a simple bluetooth communication with my arduino UNO. I have already post a topic on arduino.cc trying to resolve my problem : http://forum.arduino.cc/index.php? ... I have already post a topic on arduino.cc trying to resolve my problem : http://forum.arduino.cc/index.php?topic=396886 but no successfull breakthrough came out from it. ... I would like to communicate (send basic messages) from my workstation (Windows 7 - dondle bluetooth) to my Arduino UNO thanks to a bluetooth module (ZS-040). I see the support process like this : - I can send photo of the hardware design - I can share my desktop screen to check out the arduino code and the windows bluetooth configuration.
Skills: Arduino
Fixed-Price - Intermediate ($$) - Est. Budget: $50 - Posted
Looking for an experienced front end developer to create a custom PCB. The scheme as well as the files will be provided. Any additional components which need to be purchased will be provided (or purchased by the freelancer and reimbursed). The design is for a basic smart watch and as such will need to be no larger than 1.5 inches by 1.5 inches. The clock uses a .96 inch OLED display, controller, buttons, and RTC. Please let me know if you have any questions. Thank you.
Skills: Arduino Circuit Design PCB Design
Fixed-Price - Entry Level ($) - Est. Budget: $500 - Posted
Looking for someone that can develop a Flash over automotive diagnostic CAN program. This program must run freeRTOS and preferably use the due_can library which works well with my hardware. I can supply specifications for the flash routine. The software must read a .hex file from SD card and then flash an ECU on the CAN network with that flash file. I can provide any information that is needed for the process.
Skills: Arduino Automotive Engineering C Microcontroller Programming
Fixed-Price - Expert ($$$) - Est. Budget: $100 - Posted
We need an Arduino sketch for Intel Edison for MPU6050 sensor that produces raw acceleration and gyro output via serial port at 100Hz Accel_X, Accel_Y, Accel_Z, Gyro_X, Gyro_Y, Gyro_Z You are welcome to utilize any open source information.
Skills: Arduino