Rfid Jobs

6 were found based on your criteria {{ paging.total|number:0 }} were found based on your criteria

show all
  • Hourly ({{ jobTypeController.getFacetCount("0")|number:0}})
  • Fixed Price ({{ jobTypeController.getFacetCount("1")|number:0}})
Fixed-Price - Expert ($$$) - Est. Budget: $300 - Posted
Our company needs an optimized design of our RFID TAG antenna. Details below... RFID Tag antenna requirement 1. Reader 200 mW Power antenna, RFID TAG antenna should achieve range 50cm 2. antenna type : microstrip 3. ... Reader 200 mW Power antenna, RFID TAG antenna should achieve range 50cm 2. antenna type : microstrip 3. ... Frequency bandwidth is 860 MHZ to 960 MHZ middle frequency of RFID is 915 MHz. 6. Antenna area: must be smaller than 40mm x 15 mm (height x width) Other Details 3) Communication standards:ISO/IEC 18000-6 Type C Radio Frequency Identity Protocols Class-1 Generation-2 UHF RFID Protocol for Communications at 860 MHz – 960 MHz, Deliverables: We will need Both prototype and design.
Skills: RFID Antenna Design
Fixed-Price - Expert ($$$) - Est. Budget: $1,000 - Posted
this is our RFID case: UHF RFID reader to send/compress +3K bytes to a RFID tag with E-ink E-paper display tag The information sent will by the RFID reader will be displayed on the RFID Tag's E-ink E-paper display we need you to write the firmware for our RFID Tag must be familiar with 1) Impinj monza x-2k 2) MCU: T.I MSP430 used to communicate with monza x-2k and manage backend display system ... this is our RFID case: UHF RFID reader to send/compress +3K bytes to a RFID tag with E-ink E-paper display tag The information sent will by the RFID reader will be displayed on the RFID Tag's E-ink E-paper display we need you to write the firmware for our RFID Tag must be familiar with 1) Impinj monza x-2k 2) MCU: T.I MSP430 used to communicate with monza x-2k and manage backend display system ... this is our RFID case: UHF RFID reader to send/compress +3K bytes to a RFID tag with E-ink E-paper display tag The information sent will by the RFID reader will be displayed on the RFID Tag's E-ink E-paper display we need you to write the firmware for our RFID Tag must be familiar with 1) Impinj monza x-2k 2) MCU: T.I MSP430 used to communicate with monza x-2k and manage backend display system
Skills: RFID
Fixed Price Budget - Intermediate ($$) - $100 to $120 - Posted
For security reasons we are looking for a combination of a GPS and a RFID systems. We would like to have to possibility to track the company trucks and buses with the GPS system (using Google services probably). ... Moreover, we would like to have the possibility to track our employees via RFID to see if they have been picked up and where. We would also like to see where they have been brought to and when. ... . • If you wouldn’t find anyone providing these combined system services, what would be the necessary steps to build this thing on our own? Who are the best GPS-Tracking systems and RFID-Tracking systems providers? Do we need software developers?
Skills: RFID Agile software development Applicant Tracking Systems GPS Development
Fixed-Price - Intermediate ($$) - Est. Budget: $800 - Posted
When a customer signs up for our subscription, they will have a RFID tag on the windshield which our reader will read and tell us what type of wash they are subscribed to, and if their subscription is active ... When a customer signs up for our subscription, they will have a RFID tag on the windshield which our reader will read and tell us what type of wash they are subscribed to, and if their subscription is active. • Milestone 1 – RFID Hardware & Software o Identify which RFID hardware and frequency is best suitable for the application use in the car wash o Give advice on what the best and most economical RFID reader hardware should be purchased, and any lights / screens to convey data that will work in conjunction with the RFID reader o Confirm compatibility with reading windshield RFID tags. ... • Milestone 1 – RFID Hardware & Software o Identify which RFID hardware and frequency is best suitable for the application use in the car wash o Give advice on what the best and most economical RFID reader hardware should be purchased, and any lights / screens to convey data that will work in conjunction with the RFID reader o Confirm compatibility with reading windshield RFID tags.
Skills: RFID Stripe
Fixed Price Budget - Expert ($$$) - $5 to $200 - Posted
There is a company on the market (Austria micro systems) offering some 3D RF/RFID Low Power Wakeup receivers: http://www.mouser.com/ds/2/588/AS3933_Datasheet_EN_v2-480979.pdf http://www.mouser.com/ds/2/588/AS3930_Datasheet_EN_v5-473457.pdf We would like to hear your opinion on how we can wirelessly wake-up our Tag.
Skills: RFID Antenna Design Electrical engineering