mikrotik ipchains and nat port forwarding configuration

Closed - This job posting has been filled and work has been completed.
IT & Networking Network & System Administration Posted 2 years ago

Fixed Price

Delivery by December 4, 2012

$65.00

Budget

Details

If you know ipchains, and or routeros/mikrotik this should be a 30 minute in and out job.  If you aren't familiar with mikrotik then I'm ok with you doing it and taking longer than 30 minutes for some paid learning, but the job needs to be done by tomorrow morning, or I can't pay you.  This is not to configure the windows server, just a router.

Need port 81 open and forwarded from public to 192.168.6.22

Also Need ports for windows RRAS from public IP address to internal 192.168.6.2.  The 2012 server will be doing VPN duty.

below is an copy and paste off the web of what windows VPN needs as far as ports.

1) If RRAS based VPN server is behind a firewall (i.e. a firewall is placed between Internet and RRAS server), then following ports need to be opened (bidirectional) on this firewall to allow VPN traffic to pass through: -

For PPTP: IP Protocol=TCP, TCP Port number=1723 <-Used by PPTP control path IP Protocol=GRE (vaalue 47) <- Used by PPTP data path For L2TP: IP Protocol Type=UDP, UDP Port Number=500 <- Used by IKEv1 (IPSec control path) IP Protocol Type=UDP, UDP Port Number=4500 <- Used by IKEv1 (IPSec control path) IP Protocol Type=ESP (value 50) <- Used by IPSec data path For SSTP: IP Protocol=TCP, TCP Port number=443 <- Used by SSTP control and data path For IKEv2: IP Protocol Type=UDP, UDP Port Number=500 <- Used by IKEv2 (IPSec control path) IP Protocol Type=UDP, UDP Port Number=4500 <- Used by IKEv2 (IPSec control path) IP Protocol Type=ESP (value 50) <- Used by IPSec data path

---
Skills: mikrotik, routers


About the Client

(4.97) 18 reviews

United States
Amarillo 08:55 PM

34 Jobs Posted
59% Hire Rate, 1 Open Job

$6,637 Total Spent
23 Hires, 1 Active

$13.50/hr Avg Hourly Rate Paid
423 Hours

Member Since Jan 21, 2011