Browse Mechatronics job posts for project examples or post your job on Upwork for free!

Mechatronics Job Cost Overview

Typical total cost of Upwork Mechatronics projects based on completed and fixed-price jobs.

Upwork Mechatronics Jobs Completed Quarterly

On average, 4 Mechatronics projects are completed every quarter on Upwork.

4

Time to Complete Upwork Mechatronics Jobs

Time needed to complete a Mechatronics project on Upwork.

Average Mechatronics Freelancer Feedback Score

Mechatronics Upwork freelancers typically receive a client rating of 4.52.

4.52
Last updated: August 1, 2015

Popular Mechatronics Searches

Clear all filters
  1. Ali Imran

    Ali Imran

    Mechatronics Engineer

    Pakistan - Last active: 5 days ago - Tests: 8 - Portfolio: 8

    I'm a mechatronics engineer and robotics enthusiast. I have keen interest and hands-on experience in electronics systems and product development. I give attention to every detail, do work with dedication and maintain a professional attitude. This enables me to provide my clients with best possible solutions and deliver the targets on time. **Areas of Interest and Experience** Product Development Robotics Feedback Control Systems Process Automation Mechanical Design Electronics Design PCB Layout Design Arduino Atmel AVR Microcontrollers RF and Bluetooth Switched-Mode Power Supply (SMPS) Battery Management Renewable Energy R&D Brainstorming 3D CAD Modeling; Renderings and Animations

    $20.00 /hr
    8 hours
    5.00
  2. Thiago Silva

    Thiago Silva

    Civil Engineer (native Brazilian/graduated in Australia) IELTS 8.5

    Brazil - Last active: 11 days ago - Tests: 4

    Native Brazilian with proficient Portuguese writing skills, civil engineer with honours graduated from QUT in Australia where I lived and worked for 5 years, IELTS overall band score of 8.5 out of 9.0. Casual experience as a structural engineering tutor at university, 4.5 years of experience in the hospitality industry, completed technical high school in Mechatronics. I can guarantee exceptional quality and communication alongside with work completion within the required timeframe. Capable of executing high quality work in a timely manner in the areas of translation, transcription, voice recording and anything related to the English-Portuguese pair.

    $15.00 /hr
    0 hours
    5.00
  3. Muhammad ABI WAQAS

    Muhammad ABI WAQAS

    ENGINEER

    Pakistan - Last active: 19 days ago - Tests: 3

    I am a multi talented boy to work professionally, and contribute my long years of knowledge and experience. I have done Ms Project Management and BE Mechanical Engineering from reputed universities. I am devoted and find the perfect way to do any work. Highly motivated Mechanical engineer with broad experience in product development and project management,Tutoring High school Level, a demonstrated ability to quickly learn and apply new concepts, easily adapt to change, mentor others, and communicate fluently in English. Well versed in teaching and conducting research and development of technical products.

    $10.00 /hr
    0 hours
    0.00
  4. Waleed K.

    Waleed K.

    Experienced CAD designer for all designing needs

    Pakistan - Last active: 21 days ago - Tests: 1 - Portfolio: 16

    I am a bachelors in Mechatronics and Control Engineering.I have always had a knack for designing things and bringing them to physical reality. Hence,my interests towards CAD based softwares like SOLIDWORKS etc and provide complete part design to manufacturing process solutions. Currently i design dies for the family manufacturing business(examples can be seen in my portfolio). Another skill i have is PLC programming and HMI design. I currently work for a company that provides services for Allen Bradley PLC systems. My job requirement is to program the PLCs on RSLOGIX 5000(by Rockwell Automation) based on the project automation requirements and i have successfully executed two projects (Nahil Irrigation Project, Dubai and Ruwais Waste Water Treatment Plant, Dubai. The HMI is designed using the FACTOR YVIEW STUDIO by Rockwell Automation as well. Apart from that i am also a reasonably good writer and was the english editor of both the school and college magazine 'Al-Hilal'.

    $15.00 /hr
    109 hours
    4.96
  5. Alonso Vazquez

    Alonso Vazquez

    Mechatronics Eng. project manager, CAD designer and PLC expert

    Germany - Last active: 16 days ago - Tests: 3 - Portfolio: 3

    I am a Mechatronic Engineer with experience in project management and the design and conception of new machinery, as well as R&D, web research, technical writing and translations. My IT-knowledge includes PLC programming (all languages), CAD/CAE design (Solid Edge, Autodesk Inventor), circuit simulation (Proteus, Pspice, NI Multisim), LabVIEW, Photoshop, Illustrator, MS Office, FluidSim, among others. I have worked with sectors like construction, automotive, automation, production lines, metal mechanic production and design, renewable energy and efficiency, LED lighting design, et al. In my previous job I was in charge of the identification of problems in the industry, then proposing and designing an automated solution to solve it. Previously running simulations and tests with 3D design software in order to minimize errors and maximize efficiency. I was in charge of making the synergy between the mechanical, electrical/electronic and programming aspects of these projects. I was a finalist in Mexico's most important green tech contest, the Clean Tech Challenge Mexico 2012. I designed a product and system consisting of an oven heated directly from a solar energy source reducing the consumption of gas up to 80%. I was a semi-finalist in Mexico's FIDE program for the solar entrepreneur of the year. I have an excellent fluent, written and spoken, English language (TOEFL PBT 640). Additionally I have experience with translations between English and Spanish, in technical writing, formal letters, web content, interviews, product specifications, manuals, among others.

    $25.56 /hr
    14 hours
    5.00
  6. James Kagochi

    James Kagochi

    mechatronic engineer, schematic capture and PCB design, arduino expert

    Kenya - Last active: 25 days ago - Tests: 3 - Portfolio: 3

    The creation and designing of an device from scratch is a passion to me. I am a mechatronic engineer and an electrical and electronic hobbyist. I have much experience in circuit design, PCB schematic and design and implementation of projects using microcontrollers such as arduino and AVR system on chips such as MEGA and XMEGA. samples of my work are in my portfolio

    $12.56 /hr
    0 hours
    4.88
  7. Asif-Al-Zubayer Swapnil

    Asif-Al-Zubayer Swapnil

    Experienced Web Researcher and Admin Support Specialist

    Bangladesh - Last active: 6 days ago - Tests: 8 - Portfolio: 1

    For past 3 years I have been working on the fields of Web Research and Admin Support and gained considerable expertise. Also, I'm a Mechanical Engineering graduate student with additional focus on Mechatronics and Embedded Systems Design.

    $5.00 /hr
    866 hours
    4.99
  8. Edgar michael R.

    Edgar michael R.

    2D/3D Drafting, PCB,Circuit,Product & Industrial Design, Math Tutor

    Philippines - Last active: 14 days ago - Tests: 9 - Portfolio: 16

    An Electronics Engineer with mechanical design experience. I have initiated an analysis and improvements for yield rate, waste disposal, claims, quality issues and machine breakdown. I have developed technical drawings for machine parts, connector products, packaging and using Solidworks, AutoCad, Google Sketch up Pro, Inventor and 3ds max. I also have a practical experience in Mechatronics and Instrumentation and Control System. National Certification from TESDA (Technical Education and Skills Development Training) - Mechatronics Servicing NCII - Instrumentation and Control Servicing NCII Electronics Engineering experience; - PCB design (EagleCad, OrCad) - Circuit design ( Multitester, Amplifier, Power supply, Alarm System) - PIC Microcontrollers, Logic Circuits - PLC (Programmable Logic Controllers), Pneumatics, Electrical and Pnuematic Diagram Analysis) Instrumentation and Control System - Good knowledge of level, flow, pressure, temperature instrumentation types and their applications (Yokogawa, Endress+Hauser, Rosemount, ABB, and Vega) ; - Good knowledge of control valves, valve types, construction and application; • Ability to read and understand loop diagrams, P&ID and hook-up drawings; • Working knowledge and expertise of the following; - Installation and lay-out of field instruments based on instrument installation and hookup details, instrument junction boxes and auxiliary terminal boxes; - Bench calibration of instruments and re-ranging of smart transmitters by Hart 275 Communicator - Installation and layout of DCS panels, monitors, DCS I/O modules/cards ,Ethernet switches, fiber optic patch panels - Loop-checking, testing/simulation and commissioning of all analog and digital signals to/from DCS - Basic understanding and trained in installing microcomputer hardware, operating systems, common user applications, network systems, and various common peripherals in a manufacturing or processing environment; Mechanical Design experience for connector products. - 2D and 3D modeling ( connector housings,mold, sheet metals, machine parts, jig & gauge designs and assemblies) - Process and Design Failure Mode and Effect Analysis - Stress Analysis - Tolerancing and Simulation - Fabrication and Tooling - Design of Experiments - Design for Manufacturability

    $11.11 /hr
    279 hours
    4.92
  9. Mehdi Lefi

    Mehdi Lefi

    Designer & Mechanical [Mechatronics] Engineering

    Tunisia - Last active: 15 days ago - Tests: 5 - Portfolio: 19

    hi, i'm a designer ( 3D CAD & Graphique multimedia) also i have a Mechanical/Mechatronics Licence [ Mechatronics include mechanical & electrical conception ( schematic and 3D ), and IT & electronic programming], allways ready to work. I'm FAST, CREATIVE and HARD WORKER. We can negosiate price. - 3D Modeling & CAD (Mechanic & Electronic) - SolidWorks ( Certified) - Engineering & Technical Design - Graphic Design - Logo Design - Photoshop - Video Production - Web Design (Joomla & Wordpress) - Website Content - Translation - Web Research - Network Administration .................. Chek my portfolio and skils.

    $16.67 /hr
    202 hours
    4.97
  10. Mohiz Ahmad

    Mohiz Ahmad

    Graphic Designer

    Pakistan - Last active: 26 days ago - Tests: 2 - Portfolio: 1

    For the last 2 years, I have been doing Graphic Designing to make Logo Designs, T-Shirt Designs, Membership Cards, Visiting Cards etc. My core competency lies in complete building a new project from scratch with my unique ideas. I also have some experience in the following areas: Brochurs, Flyers, Pdf forms (for email and print), Pdf Documents (Creation and editing), MS Office(Word, Powerpoint, Spreadsheets).

    $15.00 /hr
    0 hours
    0.00