Browse Electrical engineering job posts for project examples or post your job on Upwork for free!

Electrical engineering Job Cost Overview

Typical total cost of Upwork Electrical engineering projects based on completed and fixed-price jobs.

Upwork Electrical engineering Jobs Completed Quarterly

On average, 108 Electrical engineering projects are completed every quarter on Upwork.

108

Time to Complete Upwork Electrical engineering Jobs

Time needed to complete a Electrical engineering project on Upwork.

Average Electrical engineering Freelancer Feedback Score

Electrical engineering Upwork freelancers typically receive a client rating of 4.71.

4.71
Last updated: August 1, 2015
Clear all filters
  1. Calvin W.

    Calvin W.

    control systems engineer

    Australia - Tests: 1

    During my young career,I have been exposed to a variety of sectors in the automation industry,developing and implementing turnkey solutions tailored to our clients needs.some of the sectors i have heavily been involved in are mining,water,resources and the food sectors. I currently work in the oil and gas industry as i have come to a point in my career where i would like to specialise. I am looking for work on this site because i still have a passion for developing solutions for clients.

    $27.00 /hr
    35 hours
    5.00
  2. Duvindu Piyasena

    Duvindu Piyasena

    Digital Design Engineer

    Sri Lanka - Tests: 4 - Portfolio: 5

    I am a Bsc Electronics and Telecommunications Engineering graduate with years of experience in Digital Design I have excellent experience in FPGA based digital design. I have a very good experience in writing standardized, scalable and parameterized Verilog RTL designs and constrained random verification. I have worked with a wide range of FPGA platforms of Xilinx, Altera and Zynq soc platforms. I am experienced in cutting edge verification methodologies like Universal Verification Methodology(UVM). Other Key expertise - Linux Device Driver Development - Latex documentation - PIC/ Atmel avr microcontroller development - arduino development Languages: - Verilog HDL & SystemVerilog - C++ & C - C#/ Java/ WPF - arduino - Matlab - Linux Device Drivers using C Chips: - Xilinx Spartan, Zynq and Virtex FPGAs - Altera Cyclone - Atmel AVR/ PIC/ Arduino Tools: - Xilinx ISE and Vivado - Altera Quartus - Modelsim/ Questasim - Matlab - Proteus - Eclipse/ Netbeans/ VisualStudio - Atmel Studio/ Mplab Why me? - Passionate about my work - Commitment - Clear communication - Quality work with design documentation Thank you for visiting my profile. Do contact me if you have any project work. Regards, Duvindu Piyasena

    $11.11 /hr
    0 hours
    5.00
  3. Hany Fawzy

    Hany Fawzy

    Aeronautical & Aerospace Engineer

    Egypt - Tests: 5 - Portfolio: 1

    I'm an Aeronautical & Aerospace Engineer, Excellent in Matlab Programming/Calculations/Symbolic Manipulation/Modelling & Simulation. Excellent and have a very good background in designing, analyzing, and manufacturing UAVs. I speak & write English fluently, and my mother language is Arabic.

    $10.00 /hr
    3 hours
    4.78
  4. Franklin Francis

    Franklin Francis

    Embedded Software/Firmware Engineer

    India - Tests: 3

    Professional Summary Knowledge in Logic Design, Electronic circuits, Microprocessors and various 8 Bit – Microcontrollers. Well versed in C , Embedded C for 8 and 16 bit microcontrollers. Good exposure to technology by undergoing additional training in Embedded Software. Implemented a embedded project during my Under graduation Excellent working knowledge of C and C++ programming. Good Knowledge of Microcontroller, ARM7, MSP430 and Keil micro Version for ARM and 8051. Good Knowledge of Industry Standard Interfaces and protocols such as I2C, SPI, UART. Knowledge over Operating System concepts , IP networking (programming side and theory). Hands on experience on live projects related to IP networking, linux, OS. Hands on experience and completed projects related to microcontrollers : Microcontrollers such as a 8051/52, ARM7 TDMI – LPC2000 family, PIC 16F, 18F, AVR. Softwares used – Keil, AVR Studio, MPLAB, HITECH C compiler for PIC.

    $10.00 /hr
    0 hours
    4.90
  5. Íris Carvalho

    Íris Carvalho

    Master in Electrical and Computer Engineering.

    Portugal - Tests: 3 - Portfolio: 1

    I have a master's degree in Electrical and Computer Engineering, I have good skills in web and software development, electronic and embedded systems, and I like to write, so my technical writing is very good and accurate. I can write technical documents or scientific papers very easily. I'm also good at translating documents from Portuguese to English and vice-versa, My skills related to programming are C, C++, Java, Android, PHP, HTML, MySQL, CSS, Javascript, Verilog, writting articles using Latex, shell script, AT commands, use JSP, and some more. I can make website prototypes and the website itself, and do maintenance for your website. I also can create virtual machines. About electronics, I can design electronic systems, I can design embedded systems using PIC, Arduino, and other microcontroller's platforms, I can program FPGAs using Verilog, use bluetooth and more. Also, I can look into something new and learn quickly to fulfill your requirements. My past work experience is related to academic and scientific investigation in the Electrical and Computer Engineering field, so I have a very good working method. I am a reliable and hardworking person, I never give up until I get the job done as fast and perfect as I can. Contact me if you want to know more about my skills and past work, or if you want to see my curriculum vitae and, of course, if you have any questions.

    $20.00 /hr
    7 hours
    4.85
  6. Tran Chau

    Tran Chau

    Electrical Engineer - Contract Editor - Translation Expert

    Vietnam - Tests: 2 - Portfolio: 7

    - If you want to find a people with good knowledge about electricity and electrical software, Contact me! - If you want to find a people with good knowledge about MS office and VBA programming, Contact me! - And especially if you want to find a people with many experience in translating English into Vietnamese and vice versa in many field such as religion, culture, travel, technical, law, information technology, application description and manual, etc ..., Contact me! I will give you the best service.

    $5.56 /hr
    77 hours
    4.94
  7. Rogerio R.

    Rogerio R.

    Hardware/Firmware/Software Engineer

    Portugal - Portfolio: 1

    I am a 40-year old electrical engineer with a passion for sophistication and innovation. I have a lot of experience in many areas, a result of both my professional career as well as my own personal projects. Detailed profile information can be found at http://profile.rilhas.com I can design, test, and manufacture hardware (including PCBs) using microcontrollers, FPGAs, USB, UART, I2C, and many more, and integrate them with computers, embedded systems, mains power, motors, various sensors, etc.. It is not uncommon for hardware projects in which I’m involved to incorporate both firmware and software, or even connect to the internet or with mobile phones. I have a lot of experience in the PC world, both as a user and as a developer. I have developed high density ISDN telephony application servers (IVRs) for the main Portuguese telecom operator, with an installed base of over 2000 channels, including a voice mail system complete with voice and text fault-proof database. I have developed a large number of computer systems, both servers and clients. My work with IVR's later included testing and using various ASR and TTS technologies (for automatic speech recognition and automatic speech synthesis from the major providers like Loquendo, Nuance, Philips), applied to various areas from the IVR system themselves (directory assistance, flight booking, and more), a help support system for the elderly (consisting of an emergency telephone help server for the national Red Cross), all the way to systems for the hearing impaired (integrating with JAWS screen reader, for example). I have worked with a team to develop a tool for airport management systems, where my contribution was the development of a complete graphics subsystem based on OpenGL, which is being used up to this date (more than 10 years later), due to its capabilities not having yet been surpassed by the competition. I've developed technology to analyze video images and detect a large number of situations, including FOD at an airport in Açores, intrusion detection, early fire warning systems (marketed as CICLOPE), fire prevention systems at PORTUCEL (one of the main producer of paper and other products), illegal car parking, subterranean bus parking, automatic lane management (and infraction detection) on the 25 de Abril Bridge, and many more. I also developed technology to monitor and track bird movements using radar data. A first version used the radar image, and a more recent version uses the raw radar data (captured using a high speed data acquisition system that I also developed specifically for the radars being used). Since this system requires the display of large amounts of data (images with 30+ MPix) I also developed the visualization component (based on OpenGL). I also have some experience in CAD modeling (owing mainly to the fact that I've owned a 3D printer for several years), with which I have created numerous models for small production runs of plastic objects, mainly to assist with electronics projects but which I have also used successfully to create inexpensive plastic connectors and other components for a company that manufactures and installs solar pool heating systems, including automated 2" valves. I’ve also created custom shaped plastic cookie cutters for my wife and toys for my son. :-) I've produced several promotional 3D videos for a few companies, and I also recorded and produced music albums for a number of artists. The systems I have developed in the past make use of (of have integrated with) a wide range of languages, systems, and technologies, including C, C++, C#, JAVA, J2ME, Android, Javascript, Ruby, PIC 10/12/16/24 assembly, i386 assembly, MMX/SSE2, Verilog, TCP/IP, UDP, OpenGL, USB, WiFi, Bluetooth, Raspberry Pi, BeagleBone Black, Windows, Linux, POTS, ISDN, ASR, TTS, among many others. Many of the projects I've worked on have included other people, and I have been the project manager on most of them. For the larger projects where I was not the project manager (like those involving airport security, for example) I was the team leader of the corresponding project component. Given my extensive experience with complex and innovative projects (where a solution is not always obvious from the start and a great deal of creativity is need as the project progresses), I have also developed good skills and intuition for preventing and detecting bugs, both at a code testing stage as well as (more importantly) at a design or specification stage. These skills have proven crucial over the years, and I think that the success of all the projects I worked on depended heavily on them.

    $40.00 /hr
    80 hours
    5.00
  8. Abad Vera

    Abad Vera

    iOS Developer

    United States - Tests: 3 - Portfolio: 1

    I am a mobile app developer specializing in developing apps for iOS. I know both Objective-C and Swift programming languages.I love working with Apple's iDevices and creating cool and amazing apps on them. Most of my experience comes from working on software development challenges on topcoder.com where I have helped create apps dedicated for iPhone or iPad or a universal app. Many of these apps have dealt with web APIs, salesforce web services, and HP Idol on demand services. I love challenges, I like fixing problems and also enjoy expanding my knowledge. I am an easy person to deal with, I don't get frustrated easily and I can communicate clearly in both English and Spanish. I look forward to working with you.

    $33.33 /hr
    9 hours
    5.00