Browse Embedded Systems job posts for project examples or post your job on Upwork for free!

Embedded Systems Job Cost Overview

Typical total cost of Upwork Embedded Systems projects based on completed and fixed-price jobs.

Upwork Embedded Systems Jobs Completed Quarterly

On average, 34 Embedded Systems projects are completed every quarter on Upwork.

34

Time to Complete Upwork Embedded Systems Jobs

Time needed to complete a Embedded Systems project on Upwork.

Average Embedded Systems Freelancer Feedback Score

Embedded Systems Upwork freelancers typically receive a client rating of 4.62.

4.62
Last updated: August 1, 2015

Popular Embedded Systems Searches

Clear all filters
  1. John Comeau

    John Comeau

    expert troubleshooter, generalist developer, tenacious problem solver

    United States - Tests: 2 - Portfolio: 1

    "Jack of all trades, master of none" is typically said in a derogatory fashion, but I adopt the title gladly, and you will not likely find more than a few dozen generalists worldwide who can match my troubleshooting and problem-solving skills. I've been programming, on and off, for 40 years, if you count my study of BASIC in 1968, 6 years before I actually got my hands on a computer: the DECSystem-10 at Worcester Polytechnic Institute. As a result of working on computers and microcontrollers of various sizes and capabilities over the years, I have learned to get to the basics of a problem, come up with a prototype solution, and refine it to the customer's satisfaction. My methodology, which I found later is used by many successful programmers, is "build one to throw away"... once the code is working, rewrite it from scratch, correcting the false assumptions made in the first attempt, and refactoring to make a clean, maintainable, codebase. My background in both the electrical/electronics side of things plus years of experience reverse-engineering and improving software on dozens of different architectures gives me the rounded background necessary to take on projects which leave specialists lost. I may charge more than most ($100 is my usual rate, but I found it's unrealistic on Odesk), but when you've run up against a brick wall, I can likely find a way over, around, or through it.

    $100.00 /hr
    87 hours
    5.00
  2. Kristian Josef Delos reyes

    Kristian Josef Delos reyes

    Labview, Java, Web, Arduino, Arm Programmer, / Graphic Artist / Design

    Philippines - Tests: 3 - Portfolio: 31

    Graphic Artist Duration: 8 years ++ Skill Set: Print Media, Graphics, Web design/Layout Technology: Adobe Photoshop CS2-CC , Mild 3Ds Max Electronics Hobbyist and Consultant Duration: 8 years++ Skill Set: Schematic Design, PCB Design, PIC16 Programming, Arduino, Arm Programming, robotics projects, undergraduate and masteral thesis. Technology: SMS, Blutooth, Serial, Parallel, GPIB, I2C, SPI, RF, RFID, Smart Card, Arduino, ARM, Pic, C, Altium, Proteus, IAR, PicBasic, VB6, C#, SDIO, RMII Embedded Systems and Systems Integration Duration: 5 years++ Skill Set: Planning, Architecture, Design, Packaging, Programming, Debug, Implementation, Maintenance, SMU, Data Acquisition, Data Logging, Multiplexers, Realtime, Sensors, Linux basic navigation and scripting Technology: ARM, Labview, NI PXI, NI CompactRio, NI USB, Arduino, Java, C#, VB6, JSP, VB6, MySQL, MS SQL, Postgres , C, C++, PHP, FTP, TCP/IP, UDP, GPIB, Serial, Parallel, Linux Software and Web Development Duration: 2 years++ Skill Set: Planning, Architecture, Design, Packaging, Programming, Debug, Implementation, Maintenance, Technology: Labview, Java EE/SE, Visual Studio, JSP, Struts MVC, Spring MVC, PHP, Joomla, CodeIgniter, Cakewalk, Drupal. MySQL, MS SQL, Python, Mild Android, Google Graphs APIs, Javascript, HTML5, Responsive Design, CSS. My passion entails on research and development or Software Development with touches of art and elegance. Also add the love for electronics and integrating computer science and electronics to create amazing things. I am a dynamic person, and I don’t stop on what I know.. I continue pursuing towards perfection. I continue to study and study to improve myself more and more.

    $20.00 /hr
    500 hours
    4.98
  3. Mohamed anis M.

    Mohamed anis M. Agency Contractor

    Embedded System designer

    Tunisia - Tests: 9 - Portfolio: 7

    I have a very good experience with Assembler, C, C++, java and C#. I have been working with C for more than 5years for desktop and embedded systems. I have a lot of experience with Microchip PIC, msp430, ARM based microcontroller and DSPs. I'm accustomed to working with CAD software such as Proteus (Isis / Ares) and Altium designer. Also I speak English and French fluently.

    Associated with: BreakPoint

    $50.00 /hr
    1,440 hours
    4.85
  4. Vitali Tsiukala

    Vitali Tsiukala

    Hardware engineer

    Belarus - Portfolio: 1

    Over 3 last years, I have developed,mounted and debugged few boards: 1) 6U board based on CompactPCI including Arria II GX, Max II(EPM2210), SSRAMs,PCI controller PLX9656, Fast Ethernet controller, Optical tranceiver etc. (8-layer board) 2) 6U rear i/o board on CompactPCI including Cyclone IV, SSRAMs, ADC 14bit, DAC 14bit etc. (8-layer board) 3) Mezzanine card on PMC including Stratix IV,Max II(EPM2210), DDR II, QDR, SFP, PLX 9656 etc. (14-layer board)

    $11.11 /hr
    727 hours
    0.00
  5. Guillermo Guichal

    Guillermo Guichal

    Senior Embedded Developer - Hardware, Software, FPGA

    Argentina

    I have more than 15 years experience in embedded software, hardware and FPGA design, and have been an independent contractor and consultant for more than 10 years. I manage a small group of engineers who provide services in hardware design, FPGA design and verification, and embedded software, either bare-metal or using an RTOS or embedded Linux. We can provide great quality services and solutions at a competitive rate. We can help you not only design your system but also select the best solution, technologies and plan the system development.

    $55.56 /hr
    0 hours
    0.00
  6. Hamza Shahid

    Hamza Shahid Agency Contractor

    Video Compression/Decompression, Multimedia, Embedded, Linux & Windows

    Pakistan - Tests: 2

    To work on cutting edge and challenging technologies and provide services in my field of expertise. I have over 7 years of experience in embedded development, video compression/decompression technologies, application development for windows and linux. Tools and technologies I am expert in include C/C++ programming language, C#, Microsoft Directshow. I have also worked on embedded systems which include Xtensa based boards and Texas Instruments DM6467 based boards. I have lots of experience in algorithm development and optimization.

    Associated with: MayarTech

    $16.67 /hr
    1,036 hours
    4.77
  7. Quyen Tran

    Quyen Tran Agency Contractor

    Senior PCB Designer

    Vietnam - Tests: 14 - Portfolio: 20

    +++++ ALWAYS OFFER SERVICES THAT ARE NOT JUST THE BEST BUT LEGENDARY +++++ Thank you for your valuable opportunities!!! With 2-year expertise in the area of LINUX / WINDOWS-BASED EMBEDDED SYSTEMS DESIGN including hardware, firmware, and software design, I believe my abilities would be perfect for you. I will be offering you with all my effort and capabilities in + MCU-based Embedded System Development: - Language: Assembly/C/C++. - IDE: Code Composer Studio (CCS), Keil ARM, MPLAB, Atmel Studio, LPCXpresso etc. - Interfaces: RS232, USB Host/Device, Ethernet, SDCard, Wifi, Bluetooth, RF, GSM/GPRS, Audio etc. - Operating System: RTOS, uCLinux etc. - Prototype Development kit: Arduino UNO R3, PIC16 Explorer, AVR Butterfly, ATmega128, H8 Starter kit, MSP430 Starter kit, PSoC kit etc. + PCB Design using: - Tools: OrCad, Altium Designer, Eagle. + Linux-based Embedded System Development: - Language: C/C++, Python. - Interfaces: RS232, USB Host/Device, Ethernet, Wifi, Bluetooth, HDMI, Audio, SDCard etc. - Operating System: Ubuntu OS, Android OS etc. - Prototype Development kit: Panda, BeagleBone, Raspberry Pi etc. + DSP-based Embedded System Development: - Language: Assembly/C/C++ - IDE: Code Composer Studio (CCS) - Interfaces: PCI/PCI-X, VGA, RS232, Ethernet, Audio etc. - Prototype Development kit: TI DM642. + PC Software Development and Web Programming using: - Language: C/C++/C#, Java, SQL, HTML5 etc. - IDE: Visual Studio 2005/2008/2010/2012, Eclipse, Matlab, LabVIEW etc. + Mobile Software Development using: - Language: C, Java - IDE: Android SDK + FPGA-based Embedded System Development: - Hardware Description Language: using Verilog HDL/VHDL. - Firmware Design Language: using Assembly/C/C++. - IDE: Altera Quartus (Quartus II, NIOS II, SoPC Builder, Qsys, SignalTap etc.), Xilinx ISE, Mentor Graphic Modelsim. - Interfaces: PCI/PCI-X/PCI-Ex, VGA/DVI/HDMI, RS232, USB Host/Device, Ethernet, SDCard, Audio etc. - Operating System: RTOS. - Prototype Development kit: DE2, DE2-115, Stratix II/III/IV, PCI-X Dev. kit, T-Pad kit, Atlys. I wish you would give me the opportunity to work with. Thank you ---------------------

    Associated with: FioT Co., Ltd.

    $11.11 /hr
    984 hours
    4.76
  8. Paul M.

    Paul M.

    Multi-disciplined Development Engineer

    South Africa - Tests: 5

    I have been involved in software and hardware product development in the electronic manufacturing industry for the last number of years. Primarily this focus has been on embedded development on ARM with C++ but also Java, C# and PHP for testing, prototyping and for the development of other products and services. I have also worked in the research sector, around the field of space science and astronomy instrumentation. My strong background in electronics and software development is complimented by more than a decade of experience using open source tools and systems to deliver robust and scalable solutions to industry. I would be interested in endeavours where I can leverage my skills and expertise to create lasting customer value.

    $55.56 /hr
    51 hours
    5.00