Browse PLC Programming job posts for project examples or post your job on Upwork for free!

PLC Programming Job Cost Overview

Typical total cost of Upwork PLC Programming projects based on completed and fixed-price jobs.

Upwork PLC Programming Jobs Completed Quarterly

On average, 6 PLC Programming projects are completed every quarter on Upwork.

6

Time to Complete Upwork PLC Programming Jobs

Time needed to complete a PLC Programming project on Upwork.

Average PLC Programming Freelancer Feedback Score

PLC Programming Upwork freelancers typically receive a client rating of 4.67.

4.67
Last updated: September 1, 2015

Popular PLC Programming Searches

Clear all filters
  1. Artem Surovenko

    Artem Surovenko

    SCADA development and PLC-programming

    Russia - Tests: 1

    Hi! I have five years of experience in PLC-programming and SCADA development in the oil industry and I'll be glad to help you. I work with: - Allen Bradley controllers and Rocwell Automation SCADA (SLC-500, Micrologic, Compactlogic, Controllogic, RSView32, Factory Tallk ); - Siemens controllers (H-417, 1200 controllers, S7 step, TIA-portal); - Emerson Delta-V controllers - Stahl controllers Also I can design automation system based on the Ritall and Phoenix contact prodacts.

    $10.00 /hr
    0 hours
    0.00
  2. Diluka H.

    Diluka H.

    Embedded Systems, PLC Programming and Computer Vision

    Sri Lanka - Tests: 1 - Portfolio: 7

    Mechatronics Engineering postgraduate from Asian Institute of Technology expertise in Embedded Systems, PLC Programming and Computer Vision. Programming : Embedded C - ARM Microcontrollers, PIC and Atmel Microcontrollers C / C++ - Computer Vision, Image Processing, Embedded GPU Programming Ladder / Statement List - Siemens and Mitsubishi PLCs VHDL / Verilog - Xilinx FPGAs Python - R Pi Single Board Computer Programming PHP / MySQL Android Circuit Design : Wireless Embedded Systems - Bluetooth, Wi-Fi, GPS, NFC Power Supplies / Power Banks Custom Arduino boards PCB Design EAGLE / Proteus Simulations : MATLAB, LABView, ModelSim

    $22.22 /hr
    337 hours
    5.00
  3. Dmitriy Murashov

    Dmitriy Murashov

    Programmer PLC Step7 Beckhoff HMI SCADA

    Russia - Tests: 2

    •Highest education achieved: Master’s degree Total years of work experience: 6 years •Successful background in development of programs for Siemens PLC (Simatic S5,S7), Siemens HMI (ProTool Pro, WinCC), Mitsubishi PLC, Omron PLC, Allen Bradley PLC (SLC500), Wonderware SCADA (InTouch), Rockwell SCADA (RS VIEW32) in automobile and tobacco industry. Profound knowledge of Siemens, Omron, Mitsubishi and Allen Bradley PLC Networks, Flex I/Os, Operator Panels; installing, configuring, parametrizing, updating, troubleshooting Siemens, Omron, Mitsubishi, Allen Bradley Software for PLC. •Strong experience in developing, installing, setting up, troubleshooting, modernization of automation control systems, process visualization systems; making technical documentations; adjusting, tuning and repairing all kind of electronic and electrical equipment (Drive Control, Servo Drive Control, Step Drive Control, Motion Control, etc.) .

    $16.67 /hr
    19 hours
    0.00
  4. Daniel Sanz Merodio

    Daniel Sanz Merodio

    Robotics, automation, control and electronic engineer and programmer

    Spain - Tests: 4

    I have been working with PCL, HMI and SCADA and have deep experience in the development of complex projects in big plant processes in the field of water treatment, distilleries. I have worked with a wide range of PLC brands, such as SIEMENS, ALLEN-BRANDLEY TELEMECANIQUE, National Instrument... I have developed and programmed an active orthosis ATLAS, which is a robotic device to help people to walk. I have also reprogrammed and configured a hexapod robot SILO6. I am an expert on sensors and actuators, microproccesor, arduino, labview, SCADA,HMI and PLC

    $22.22 /hr
    0 hours
    0.00
  5. Vasily Timofeev

    Vasily Timofeev

    Microcontrollers and industrial automation design

    Russia - Tests: 2

    I have an experience of developing: - industrial automation systems (Siemens simatic s7-200, s7-300, s7-400, Logo, Misromaster, ET-200); - embedded systems based on Atmel ATMega, XMega and ST Microelectronics STM32 F3, F4 (Cortex M3, M4 MCU). I can write firmware for MCUs with C and assembler. Also I skilled in STL, SCL, FB and LAD languages (for industrial MCU); I have Ph. D. degree in technical science. My interests in science is finite-element modelling of thermal, hydraulic, mechanical and electrical processes. For this purposes a can use next software: - Abaqus - ANSYS - Proteus - Microcap

    $11.11 /hr
    0 hours
    0.00
  6. Stevan Ilić

    Stevan Ilić

    Automation engineer

    Serbia

    Stevan Ilić is an engineer with master degree in Process Control. He currently works like a C#/.NET programmer, but have lot of knowledge in automation(PLC, HMI, SCADA,etc...). He have some project with Home automation, HVAC systems and OPC servers.

    $16.67 /hr
    0 hours
    0.00
  7. Alexander Kuznetsov

    Alexander Kuznetsov

    Alexander Kuznetsov

    Russia - Tests: 4

    My name is Alexander Kuznetsov! I'm from Russia. Over the last 3 years, I have developed software for PC (Windows), RTOS, Cross Platform, National Instruments hardware platform and PLC. My specialization is: C/C++ (Visual Studio, Qt (+QML), CodeBlock, LabWindows) C#, VB, VB .NET, VBA, VB Sctripts SQL/MySQL/SQLite OpenCV (I'm graduate student of computer vision systems department) Scripts for Microsoft Office. LabView (incudin NI hardware platform PXI, PXIE and Compact Rio). I have National Instruments certificates (2+ Years experience). Programming OMRON PLC, OMRON Graphic Tuch Panels and OMRON SCADA. I have Omron certificates. Programming scripts for Zuken E3 Software.

    $7.78 /hr
    0 hours
    5.00
  8. Usman A.

    Usman A.

    Professional Consultant

    Pakistan - Tests: 4 - Portfolio: 7

    Professional Engineer with many years of hands-on experience in control system design, engineering, commissioning, maintenance, training, and process improvements coupled with problem solving and troubleshooting skills.PLC Rockwell ,GE Fanuc,Honeywell Experion, Wonderware Archastra, SCADA Factory Talk Studio ,Citect and Siemens Win CC, OSI PI ,OPC,Device Net,Control Net and Ethernet communication protocol. Operating system Windows server 2008 /Windows 7 and VM ware (ESX server ) "Belief in oneself is one of the most important bricks in building any successful venture"Lydia M. Child

    $8.89 /hr
    41 hours
    4.07
  9. Ohad bin I.

    Ohad bin I.

    PLC Programmer and HMI/Scada Designer

    Pakistan - Tests: 1

    I have more than 4 year Experience as PLC Programmer.I am working as a Lead Automation Engineer.I have wide Experience, PLC Programming and HMI/SCADA Designing. Proficient with RSLogix 500/5000(Allen Bradley) Proficient with Twidosuite /Unity Pro(Schneider Electric/Modicon) Proficient with TIA Portal(Siemens) Proficient with Factory Talk PanelView HMI(Rockwell) Proficient with Vijeo Designer Magelis HMI(Schneider Electric) Proficient with Deltasoft Delta HMI Intermediate with Scada Intouch,Citect,Cimplicity,Wincc,FactoryTalk

    $6.11 /hr
    0 hours
    0.00