STAAD Freelancers

More options
Clear all filters
  1. Md. nazmul H.

    Md. nazmul H.

    Structural Engineering, Steel Detailing, Connection Design, RCC Design

    Bangladesh - Last active: 7 days ago - Tests: 3 - Portfolio: 3

    serving structural engineering over five years which includes on schedule quality civil engineering services in times of critical needs. Experience incorporates project management, three dimensional modeling, static analysis and design of Concrete, Steel and Fiberglass. Proficient in finite element modeling, design and stress analysis of shallow and deep foundations which include both soils supported and pile supported foundations of heavy structures.

    $8.89 /hr
    18 hours
  2. R Rajendran

    R Rajendran Agency Contractor

    Expert Civil Engineer/Estimator/Architect drafting/3D Modelling

    India - Last active: 5 days ago - Tests: 16 - Portfolio: 8

    Graduated in Civil Engineering from India. I worked for many reputed organizations and have experienced in Industrial, Residential and commercial buildings and structures projects located across multi -states in India. Currently I am self employed and providing services for private owners in preparing buildings plan, estimate,quantity takeoff, tender documents, Architectural drafting plans, elevations, 3d modelling, design & detailing like Floor plans, sections, elevations. I am also experienced and expert in data entry, internet searching, Google search, Google Calendar creation, Google Spread sheet, Google docs, MS Excel, MS Word, Power point, PDF conversions, Language translation, quantity takeoff, technical writing, PLANSWIFT, BLUEBEAM, AutoCAD, Revit Architecture, Staadpro, MS Project, and Project Planning & monitoring . I am very fluent in English writing and verbal. I can provide the services into the following categories. -2D Drafting, Architectural Drawings, 3D Modelling -Prefab walls takeoff, Takeoff for all civil & architectural items, False ceiling takeoff, painting takeoff, electrical & plumbing takeoff -Estimate/quantity takeoff using Planswift and Bluebeam software -Civil Engineering and Project Management -Structural Analysis -Structural Steel Takeoff -Reinforced concrete design -Internet Research, Google searches, Google spread sheet, Google Calendars, Google docs -Data Entry, Copying, Pasting, Editing, Sorting, Indexing, e-books, conversions of PDF images -PDF conversions -Translations -Accounting,Quickbooks Intuit and Xero -Transcription and Proof reading I am detailed oriented, accurate, honest and reliable. Main objective is to provide the most efficient services to every client. I am very keen to learn new things something which I can even learn while working. I work with commitments and focus on clients satisfaction to the greatest level. I am very much thankful to every client viewing my profile.

    Associated with: Online Jobs Services

    $13.33 /hr
    401 hours
  3. Xosé Manuel Carreira Rodríguez

    Xosé Manuel Carreira Rodríguez

    Top quality computer modeller of structures and fluids

    Spain - Last active: 2 months ago - Tests: 3

    I am a civil engineer experienced in structures and fluids analysis. Alone or as a member of a team with other colleagues of Deskia Consult ( and the Association of Engineers for the Common Good ( I can help you in a wide variety of projects, consulting reports and training in the following areas: - Industrial and architectural structures (civil works, buildings of concrete and steel, tanks, vessels, bridges, heavy duty flooring, equipment foundations, towers, FEA,... ). - Water (catchment, piping and pumping, drainage, large culverts, flood risk, erosion, storm tanks, CFD,...). - Recruiting and outsourcing of low-cost fee engineers in Spain and Portugal. - Open source and commercial simulation software for fluids and structures. Ad hoc numerical simulation and programming. Do not hesitate to contact me to ask for sporadic consultancy and training.

    $25.00 /hr
    0 hours
  4. Rasel Pk.

    Rasel Pk.

    Construction Project Planner & Structural Designer

    Bangladesh - Last active: 3 days ago - Tests: 4 - Portfolio: 4

    After completing B.Sc. in Civil Engineering in 2011 from Rajshahi University of Engineering & Technology - one of the top ranked University in Bangladesh, I have been working as a Construction Project Engineer in real estate company and beside this I have been working as a Freelance Structural Designer . I have sound knowledge on Design of Building Structure & Construction Project Planing and Costing.

    $5.56 /hr
    0 hours
  5. Aster Fortuito

    Aster Fortuito

    Civil/Structural Design Engineer

    Japan - Last active: 3 days ago

    Perform strength calculation of various structural systems which includes foundation analysis, Execute calculation for steel structures, Vertical Vessel foundation design, Horizontal Vessel, Pump Foundation design, Mat Foundation design, Anchor Bolt design, Base plate design, Compressor foundation design, Software packages StaadV8i, MAT3D, and RisaBase, Foundation 3D, Staad Foundation, Navisworks, Both proficient in English units and SI. Design & analysis for various foundations for inlet manifold, production separator, test separator, oil stripping column, closed drain vessel, crude oil storage tank, fire water tank, diesel storage tank, crude-crude exchangers, oil reboiler, oil export pump, oil recycle pump, produce water transfer pump, closed drain pump, savenger loading pump, diesel fire water pump, electric jockey pump, general gas sweeting sweetening packages, burner fuel gas sweetening packages, hot oil packages, HP & LP flare stack, pig launcher receiver, gas engine generators, instrument air packages and fire fighting equipments. - Structural design for cable rack - Piperack foundation design - Gas compressor foundation design - Hot water heater foundation design - Foundation design for various modules/modular type equipments - ACI-08 - IBC-09 - ASCE-07 - Foundation Design for crude charge heater - Foundation Design for wash water tank - Anchor bolts design & analysis AISC J8 - Checking for all anchor bolts, single anchor bolt breakout, group anchor bolt breakout, single anchor unity & seismic check, concrete brittle & failure control, anchor bolts shear single & groups, single & group anchor concrte pryout and anchor bolt pullout combined condition. - Foundation design for Diesel Hydrotreater reactor vessel - Foundation design for Distillate Hydrotreater Dewax reactor vessel - Design calculation of Desalination Shelter, Desalination Shelter Foundation, RO unit & Pump Foundation, MMF unit and piping skid, Mat Foundation of multimedia filter shelter vessels, Softener unit & piping skid, Regen & Permeate tank design, Cartridge filter, foundation, Sulphuric acid tank & Calcium tank including containment areas, Caustic tank & Coagulant tank including including containment areas, Sodium Hypochlorite tank & containment area, oxidation tanks, Sludge holding tank & transfer pump foundations, Sludge dewatering unit Backwash pump skid, Filtrate transfer pump skid, LP Feed pumps & piping skids, N-S Piperacks, N-S Pipebridges, Main piperack, NCS nodal compressor piperack & sleeperway, Gas inlet manifold sleeper, Hud Compressor piperack, Water Facilities sleeperway utilities piperacks, piperack sleeperway to ponds, Flare piperack, Gas inlet manifold platform structures, crossover culvert, NCS Compressor foundations, HCS compressor shelter foundation, Lube oil & Air Cooler foundations, Scrubber skid foundations, HCS piperack foundations, HCS GTA foundation, TEG Misc. steel support platform, HCS Nitrogen generation package foundation, HCS Flare to KO Drum foundation, Sales gas custody metering skid, Fuel Gas inlet custody mettering skid, Gas intent manifold pipebridge, & TEG Finger Rack. - Competent in AS Standards - AS 1170 – Structural Design Actions - AS 1597 – Precast Reinforced Concrete Box culverts - AS 2870 – Residential slabs and Footings - AS 4100 – Steel Structures - AS 4678 – Earth Retaining Structures - BCA 2009 - AS/NZS 1170.2:2002 - American Standards - British Standards - BS 8007 Design of Concrete Structures for Retaining Aqueous liquids - BS CP 2012-1 Foundations for Machinery - ACI 318-05, ACI 318-08 - AISC 2010 - AISC 341-02 Seismic Provisions for Steel Buildings - ANSI/AISC 360-10 - ASCE - ASTM - Proficient in various Engineering software such as Revit Architecture, Revit Structure, StaadV8i, RAM Connection, TEKLA Structures, Prokon, Etabs, SAFE, AutoCAD, Microsoft Office, MS Project, Premavera, Mathcad, Photoshop, 3D Studio Max, Autodesk VIZ, Inventor Fusion, Robot structural analysis, SAFE, SAP2000, Risa 3D, Risa Footing, Risa Foundation, Risa Connection, Microstation, SPR, & Smart Plant 3D. - Structural design and structural detailing of multiple residential building - Familiar with Australian Codes & Standards AS 1170 – Structural Design Actions AS 1597 – Precast Reinforced Concrete Box culverts AS 2870 – Residential slabs and Footings AS 4100 – Steel Structures AS 4678 – Earth Retaining Structures Design Projects in Australia: * Proposed New House , 26 Dudley Ave. Bankstown NSW * Proposed New House, 48 Weldon St. Burwood NSW 2141 * Proposed New House, 26 Dudley Ave. Bankstown NSW * Proposed Outbuilding & Extension 100 Priam St. Chesterhill, NSW * Proposed New Granny Flat & Awning 185 Greenacre St. Bankstown NSW * Proposed New Flat Granny & Extension, 11 Albert St. Banksia NSW * Proposed Extension, 28 Darwin St. Carlingford * Proposed Granny Flat & Extension, 28 John St. Punchbowl NSW * 38 Brown St Smithfield NSW 2164 * Proposed Res’l Dwelling, 7 Lupin Ave Riverwood NSW 2210 * Proposed New House, 135 Ryedale Road Denistone NSW 2114 * Proposed New House Development, 66 Sorrell St Parramatta

    $55.56 /hr
    0 hours
  6. Ronnel A.

    Ronnel A.

    Quantity Surveyor, Civil Engineer, Structural Design

    Philippines - Last active: 01/13/2014 - Tests: 6 - Portfolio: 5

    I am very passionate to provide quality and efficient service accurately and on time. I have over 6 years’ extensive working experience in doing Civil Engineering works. Because of my experiences, I have sharpened my skills in Project Cost Estimating, Quantity take-off, Structural designing, Structural and Architectural Detailing/drafting. I pride myself on my accuracy, efficiency and reliability.

    $8.00 /hr
    22 hours
  7. Sunil Reddy

    Sunil Reddy

    Structural Engineer/Analyst

    India - Last active: 7 days ago - Tests: 1 - Portfolio: 4

    Professional Summary: I am a Structural Engineer with several years of graduate and post-graduate experience, working with multinational design consultants on projects in India, Australia and Middle East. I have extensive experience in the analysis and design of Industrial Structures, Marine Structures and Civil infrastructure works consisting of Industrial Sheds, Workshop buildings, Conveyors, Approach Jetty, Transfer Deck, Fender Systems, reservoirs, pumping stations and all important structures for water supply, liquid and earth retaining structures. I am conversant in analysis and design of structures for seismic and wind loads. I am proficient in design of structures to Indian, British and Australia codes of practices. I am proficient in STAAD Pro, ANSYS, HYPERMESH, SAP2000, ETABS and MS Office.

    $6.00 /hr
    0 hours
  8. Al A.

    Al A. Agency Contractor

    Simple & Effective Works guaranteed!

    Canada - Last active: 22 days ago - Tests: 13 - Portfolio: 8

    Expertise: # eBooks (Formatting & conversion) to any formats e.g. PDF, Mobi, ePub which are compatible for direct uploading at Amazon Kindle, iBook, Nook, Lulu, Smashwords, Kobo and other sites. # English - Bengali translation ( professionally certified) # Civil Engineering solution (write-up and problem solving)

    Associated with: M & M CLIENT SERVICES Agency

    $9.99 /hr
    0 hours
  9. Andi H.

    Andi H.

    Expert Structural Engineer

    Indonesia - Last active: 1 month ago - Portfolio: 1

    I am an Expert Engineers, Having over than 10 Years of Experiences in Handling Engineering Works including Structural, Civil, Steel Fabrication detailing, Architectural, Mechanical and Electrical, and Piping for Various sector of Projects. The Projects including Factory and Warehouse, Residential, office building, Mine material handling, Oil and gas, and Power Plant.

    $11.50 /hr
    0 hours