You will get iMX8 processors Based Schematic and PCB design
Top Rated
Project details
IMX8 processor is one of the most powerful processors used for portable and wearable devices and since you decided to use it in your project, I'm happy to help you in this specific field. My experience with IMX8 was on devices that were very complex like AR and VR applications where I have designed the following interfaces:
- PMIC and power supply regulators for IMX8 power management
- DDR4 32GB interfaces
- eMMC memory interface for the bootloader.
- MicroSD card interface.
- MIPI DSI to RGB888 interface for display.
-MIPI CSI interface for Camera.
- BLE interface using Nordic products
- Microphone and DAC audio for audio processing ( Input/output)
-USB 2.0 interface.
- PMIC and power supply regulators for IMX8 power management
- DDR4 32GB interfaces
- eMMC memory interface for the bootloader.
- MicroSD card interface.
- MIPI DSI to RGB888 interface for display.
-MIPI CSI interface for Camera.
- BLE interface using Nordic products
- Microphone and DAC audio for audio processing ( Input/output)
-USB 2.0 interface.
Materials
OtherField of Expertise
Automotive, IoT, WearablesDesign Software
Studio, OtherFile Format
JPG, PDF, STEP, OtherWhat's included $3,000
These options are included with the project scope.
$3,000
- Delivery Time 70 days
- Number of Revisions 2
- Number of Product Concepts 1
- Product Research
- Visualization Concept
Optional add-ons
You can add these on the next page.
Fast 50 Days Delivery
+$1,000
Additional Revision
+$500
Additional Product Concept
(+ 10 Days)
+$300Frequently asked questions
45 reviews
(42)
(2)
(1)
(0)
(0)
This project doesn't have any reviews.
AA
Anzor A.
Mar 5, 2025
Revisions to nRF52 SoC PCB
SK
Sanjay K.
Jan 17, 2025
Expert Review of Raspberry PI CM5 PCB Design in EasyEDA
Best that I have seen on Upwork! Very knowledgeable and helpful! Ethical, tireless and patient!!
IG
Ion G.
Nov 30, 2024
30 minute consultation
AA
Anzor A.
Nov 21, 2024
PCB board redesign: replace battery connector, Hall sensor, and push button.
When I provided Med my PCB design schematics, he found issues with it almost right away and promptly gave recommendations on how to improve them. He was also very responsive with my requests for different requirements.
RS
Richard S.
Jul 3, 2024
Review schematic (EasyEDA) and layout PCB
About Med
PCB designer| Circuit designer | Electronics Engineer(Altium, Kicad..)
100%
Job Success
Ariana, Tunisia - 4:07 pm local time
⭐⭐⭐⭐⭐"Med was spectacular to work with for the project. He is highly competent, asks great clarification questions, gives relevant and important suggestions, and is great with communication. I will actively seek his help on future projects." 🏆
PS: Please don't send me an invitation if you already sent TENS of invitations to other freelancers and you are NOT really interested in my profile.
I'm an Electrical (Electronics) engineer with a strong track record of over NINE years in bringing to life Electronics products. I designed the hardware for over 70 successful projects 🏆, most of them being sold today. Some notable ones (designed all the electronics and PCB layout) are Smart home devices, Corrosion sensors, Gimbal systems, Muscle stimulators, Medical scales, Smart Irrigation and weather monitoring devices, Smart Camera, and all the other projects on the webpage.
✅ I'm not just here to execute tasks; I'm here to be your partner in success. I take pride in my ability to understand your vision, offer creative solutions, and deliver results that bring value to your projects. I'm a very patient person and I have incredible support for my clients and do not leave them until their device works perfectly and they are fully satisfied.
PS: If you are looking for cheaper rather than high-quality work, I'm not the right person to make your device.
✅ Below is the Process to make sure your design is made effectively!
⭐ Receive your specs or needs, and discuss to have the necessary to start your design
⭐Design a block diagram for the circuit: This makes everything traceable and will help you follow up on the design and understand everything I put in the design later.
⭐Design schematics: follow what is put on the block diagram to design the schematics for the product.
⭐Design PCB Layout: Concerning all the standards and rules of PCB design, Mechanical constraints, Mechanical Design, and DFM, I will design the PCB Layout that works perfectly!
⭐Extract production data: BOM, Gerber files, Design, Pick and Place file, Step file.
✅ During my career I have used various technologies and components, below are some of them:
⭐RF modules LORA, WIFI, BLE, GPS, GSM, LTE, ZIGBEE: NRF52840, ESP32, SARA-R510, CC2530, CC2538, SIM9001, SIM800, Quectel, Arduino_IOT...
⭐Microcontrollers/Microprocessors: STM32 ( F and L family), ATAMEGA, ESP32, MSP430, MSP432, ATSAM, NFR52840, PIC32, PIC24, NXP, ARDUINO, IMX8...
⭐ Sensors: Temperature, humidity, O2 sensor, PH sensor, Light sensor, motion sensor, water leakage sensor, Nitrate sensor, current sensors, Voltage sensor, distance sensors, corrosion sensor, Scale sensors, accelerometers, Magnetometers, Rain sensor, Air quality sensors...
𝑾𝒉𝒂𝒕 𝑰 𝑪𝒂𝒏 𝑫𝒐 𝒇𝒐𝒓 𝒀𝒐𝒖:
✅𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻: I can assist you in crafting detailed specifications and architecting your product.
✅𝗖𝗼𝘀𝘁-𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝘁 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀: I specialize in identifying cost-effective solutions to bring your product to life.
✅𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁 𝗦𝗼𝘂𝗿𝗰𝗶𝗻𝗴: I'll handle component sourcing and oversee manufacturing processes to streamline production.
✅𝗦𝗰𝗵𝗲𝗺𝗮𝘁𝗶𝗰 𝗗𝗲𝘀𝗶𝗴𝗻: Using CAD programs like Altium Designer, Kicad, Eagle, and more, I'll create a comprehensive schematic design for your product.
✅𝗣𝗖𝗕 𝗟𝗮𝘆𝗼𝘂𝘁: I'll design Simple or multi-layer PCB layouts for your product, paying close attention to signal integrity.
✅𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗙𝗶𝗹𝗲𝘀: I'll generate essential production files, including Bill of Materials (BOM) and Gerber Files.
✅𝗣𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗲 𝗦𝘂𝗽𝗽𝗼𝗿𝘁: I'll support your team during the prototype development phase, aiding in debugging and refinement.
✅𝗧𝗲𝘀𝘁 𝘀𝘂𝗽𝗽𝗼𝗿𝘁: I can develop a detailed test plan and assist in debugging processes.
✅𝗗𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻: I'll prepare comprehensive architectural descriptions for traceability and detailed functional documentation for end-users.
𝑾𝒊𝒕𝒉 𝒕𝒉𝒆𝒔𝒆 𝒔𝒆𝒓𝒗𝒊𝒄𝒆𝒔, 𝑰'𝒎 𝒄𝒐𝒎𝒎𝒊𝒕𝒕𝒆𝒅 𝒕𝒐 𝒉𝒆𝒍𝒑𝒊𝒏𝒈 𝒚𝒐𝒖 𝒃𝒓𝒊𝒏𝒈 𝒚𝒐𝒖𝒓 𝒑𝒓𝒐𝒅𝒖𝒄𝒕 𝒇𝒓𝒐𝒎 𝒄𝒐𝒏𝒄𝒆𝒑𝒕 𝒕𝒐 𝒓𝒆𝒂𝒍𝒊𝒕𝒚 𝒆𝒇𝒇𝒊𝒄𝒊𝒆𝒏𝒕𝒍𝒚 𝒂𝒏𝒅 𝒄𝒐𝒔𝒕-𝒆𝒇𝒇𝒆𝒄𝒕𝒊𝒗𝒆𝒍𝒚. So If getting this sounds interesting, send me a message and we’ll schedule a time to talk.
Steps for completing your project
After purchasing the project, send requirements so Med can start the project.
Delivery time starts when Med receives requirements from you.
Med works on your project following the steps below.
Revisions may occur after the delivery date.
Define the solution and make a draft of the design
- Define a realizable solution for your needs that fit your requirements -Make the first draft for your system to help you understand my solution at the beginning
Select Components and make Schematic capture for the system
- Select adequate Components for the design that achieve the right functionality of the PCB) - Make the schematic capture of your system using whatever you want (Altium Designer, Kicad, Eagle, EasyEDA...)