You will get Industrial Fan design from scratch
Top Rated
Project details
You will get industrial fan design from scratch on CFturbo and CFD simulation and optimization on ANSYS and finalize the model on SOLISWORKS.
Project Scale
ObjectBuilding Type
IndustrialFile Format
SLDPRTWhat's included
| Service Tiers |
Starter
$1,000
|
Standard
$1,500
|
Advanced
$2,000
|
|---|---|---|---|
| Delivery Time | 7 days | 10 days | 14 days |
Number of Revisions | 2 | 3 | 4 |
Number of Renderings | 5 | 10 | 15 |
3D Modeling | |||
Environment | - | - | - |
Furniture & People | - | - | - |
Texturing & Lighting | - | - | - |
Architectural Walkthrough | - | - | - |
Source Files |
16 reviews
(15)
(0)
(1)
(0)
(0)
This project doesn't have any reviews.
MH
Manel H.
Oct 27, 2024
Radial Fan CFD
TS
Tony S.
Sep 28, 2024
Impeller FEA analysis
TS
Tony S.
Jul 7, 2024
Turbo impeller optimization
Great work as usual!
TS
Tony S.
Jun 9, 2024
Turbo impeller optimization
Great work, thank you!
BH
Brian H.
Jun 5, 2024
Optimize impeller and housing for increased flow while minimizing noise levels
We have been working on our air cleaner for 2 years and were satisfied with our design. We hired Mansour in hopes of optimized our impeller blade before we proceeded to go into production. His history has great 5 star reviews and has a specially in fans, although it might be turbines and industrial applications, we were willing to work with him because of the same similar principles. No LinkedIn was provided so there wasn't any way to verify his references other than what his Upwork profile shows.
Upon starting the contract, we hopped on a virtual call where I went over our current design. Over the course, I kept reiterating the objective and requirements, such as no undercuts, noise level, and performance metrics. Mansour assured me everything was understood.
His first design concept completed ignored the undercut requirement. The provided a mixed flow blade which is common used in turbines. This was a red flag. I was disappointed but spent more time to thoroughly go through the requirement one more time.
His next concept again , failed to adhere to the requirement. At this point im starting to get skeptical and we haven't even began the design process yet. However, his third concept finally was feasible.
He ran the CFD and provided the results. It showed promise so I proceeded to tell him to create a working model that we can test. The provided a model but failed to take into account our design. For us to test his concept, we would have to buy a new motor, and completely change 3 significant parts in our air cleaner. In addition, his impeller was designed for a CCW motor, and he knew ours spun CW. Instead of fixing his design so that we can test it in our current device, Mansour proceeds to tell me that I should alter our components such as buying a new motor and resoldering our controller so it spins in reverse to accommodate for his oversight. Now, im not claiming to be more of an expert in his field but I think it's much easier to change a 3d printed cad file to fit the current components vs buying new components to fit the plastic part.
I think if you don't know anything and need someone to create a fan blade, Mansour can do that for you. If it's a simple axial fan for a floor fan and you want something that performs maybe 60% well. I think he can do it.
However, if you are going to spend a lot of money on a product that will be sold to the masses maybe look elsewheret. Outside from running a CFD software, his cad skills were basic. He didn't design with consideration of our current design and told us we needed to make adjustments when we questioned flaws in his design.
Upon starting the contract, we hopped on a virtual call where I went over our current design. Over the course, I kept reiterating the objective and requirements, such as no undercuts, noise level, and performance metrics. Mansour assured me everything was understood.
His first design concept completed ignored the undercut requirement. The provided a mixed flow blade which is common used in turbines. This was a red flag. I was disappointed but spent more time to thoroughly go through the requirement one more time.
His next concept again , failed to adhere to the requirement. At this point im starting to get skeptical and we haven't even began the design process yet. However, his third concept finally was feasible.
He ran the CFD and provided the results. It showed promise so I proceeded to tell him to create a working model that we can test. The provided a model but failed to take into account our design. For us to test his concept, we would have to buy a new motor, and completely change 3 significant parts in our air cleaner. In addition, his impeller was designed for a CCW motor, and he knew ours spun CW. Instead of fixing his design so that we can test it in our current device, Mansour proceeds to tell me that I should alter our components such as buying a new motor and resoldering our controller so it spins in reverse to accommodate for his oversight. Now, im not claiming to be more of an expert in his field but I think it's much easier to change a 3d printed cad file to fit the current components vs buying new components to fit the plastic part.
I think if you don't know anything and need someone to create a fan blade, Mansour can do that for you. If it's a simple axial fan for a floor fan and you want something that performs maybe 60% well. I think he can do it.
However, if you are going to spend a lot of money on a product that will be sold to the masses maybe look elsewheret. Outside from running a CFD software, his cad skills were basic. He didn't design with consideration of our current design and told us we needed to make adjustments when we questioned flaws in his design.
About Mansour
Turbomachinery Faculty staff lecturer | Industrial Fans Expert
100%
Job Success
Cairo, Egypt - 9:52 pm local time
✅Aerospace faculty staff lecturer and lab researcher.
✅CFD|FEA |CAD| Aerospace| propulsion| Turbomachinery |Industrial Fans
✅Fan design and turbomachinery specialist.
Hi, I'm aerospace lecturer and lab researcher with 6 years of experience in various fields of industry, dealing with turbomachinery fluid mechanics, CFD, CAD, technical software development. I have authored two scientific publications.
I'm specialized in advanced computer analysis (FEA and CFD), product design, design for Manufacturing.
I work as lecturer and researcher at aerospace engineering department of Cairo university, my master's degree in aerospace engineering jet propulsion branch.
I have 5+ years of experience in “Simulation-based engineering”.
Services I Provide:
✅CFD simulations on ANSYS (fluent and CFX)
✅ FEA coupled with CFD
✅ANSYS APDL & FEA.
✅ Numerical optimization
✅ Heat transfer
✅Composite martials using ANSYS (ACP pre -ACP post)
✅Transient and steady state thermal analysis on ANSYS
✅3D Modeling for 3D Printing and Prototyping.
✅ Reverse engineering on GeoMagic
My experience from aerospace and jet propulsion engineering gives me a unique perspective when designing products.
CFD Expertise: My core strength lies in CFD. I have years of experience in tackling complex fluid dynamics challenges. Whether it's optimizing propulsion systems, analyzing aerodynamics, or conducting turbulence modeling, I have the expertise to ensure optimal fluid flow and performance. Proficient in industry-standard CFD software, including ANSYS Fluent, CFX and COMSOL, I can provide data-driven insights for your aerospace projects.
Turbomachinery Design and Engineering: I specialize in Turbomachinery design from concept to reality, I can bring your Turbomachinery ideas to life, ensuring they are efficient, reliable, and tailored to your specific needs. My holistic approach to Turbomachinery design considers aerodynamics, propulsion and structural integrity.
FEA Expertise: My skills extend to Finite Element Analysis (FEA), allowing me to address structural design and analysis challenges. Whether you need to ensure the structural integrity of components or optimize complex systems. I'm proficient in FEA software and have successfully tackled a wide range of engineering problems.
Software Proficiency: I am proficient in a wide range of software tools, including ANSYS modules, COMSOL, SolidWorks, Inventor, MATLAB, CFturbo, GASTURB, Simulink, and more. Whether you need 3D modeling, simulation or data analysis, I have the software expertise to deliver precise and efficient solutions.
✅ IF we worked together, you will now why to work with me.
Tools:
► Fluent, CFX, Turbogrid
► Solid works
► ANSYS
► MATLAB
► Autodesk Inventor
► Geomagic Design X
► CFturbo
Steps for completing your project
After purchasing the project, send requirements so Mansour can start the project.
Delivery time starts when Mansour receives requirements from you.
Mansour works on your project following the steps below.
Revisions may occur after the delivery date.
CFturbo model
Numerical design of the fan on Cfturbo.
Link CFturbo model with ANSYS
To evaluate the design the CFturbo model is linked with ANSYS fluent or CFX for CFD simulation.