Select talent location
$20/hr
92%
Job Success
$10K+ earned
Available Now
MEP Design
Autodesk AutoCAD
Mechanical Design
Material Take-Off
HVAC System Design
2D Design & Drawings
Mechanical Engineering
Fire Protection Engineering
Electrical Drawing
Electrical Engineering
Drafting
Electrical Layout Design
Project Plans
Construction Management
Project Management Professional
MEP Design Engineer with over a decade of experience in HVAC, Electrical and Plumbing system design. Authority accredited and successfully completed 20+ projects across North America.
My commitment to excellence has earned me a Top-rated rating in a very short period. My dedication to meeting all the industry standards and optimizing client budgets and schedules has constantly earned me repeated business with satisfied clients.
Take a look at the services I'm offering :-
✅ 𝗛𝗩𝗔𝗖 𝗗𝗲𝘀𝗶𝗴𝗻 𝗮𝗻𝗱 𝗗𝗿𝗮𝗳𝘁𝗶𝗻𝗴:
➤ 48 hours turnaround for residential HVAC load calculation, equipment selection and duct sizing using ACCA approved software conforming Manual J/S/D, HERS, ASHRAE and state codes.
➤ For Residential and mixed-use HVAC design services, our deliverables include
- Individual Room Heating and Cooling Loads
- Equipment Selection (Heat Pump/ Furnace/ Condensing Units etc.)and Cutsheets per client’s preferred brand
- 2D Layout Plan for authority permit indicating Equipment and Air Terminal Location, Duct Sizes, etc in an Arch D (36”x24”) Sheet
- Kitchen, Bathroom & Laundry Ventilation
- Indoor Air Quality Calculation
- Schedule of HVAC Unit and Mechanical Fans
- Documentation for Authority Approval (e.g. Title 24 for California)
➤ Commercial HVAC load calculation with Carrier HAP 5.1 and duct sizing using McQuay, conforming ASHRAE, NFPA, state regulation and other relevant state codes of practice. We provide detailed shop drawings as required by PE.
[ I have experience designing and installing up to 700 TR HVAC systems, which allows me to design accurately considering practical on-site constraints]
✅ 𝗥𝗲𝘀𝗶𝗱𝗲𝗻𝘁𝗶𝗮𝗹 𝗣𝗹𝘂𝗺𝗯𝗶𝗻𝗴 𝗗𝗲𝘀𝗶𝗴𝗻:
➤ Fixture Layout, Water Supply Plan, Sanitary and Storm Drainage Plan, Raiser Diagram for users' maximum comfort ensuring local code.
➤ Water Supply Fixture Unit calculation per Table 6-6, Drainage Fixture Unit calculation per Table 7-5 and Grease Interceptor calculation per Table 10-3 of Uniform Plumbing Code and state regulation
➤ Pipe and Equipment Schedule
➤ Hot Water Tank Type and Size, Pipe and Insulation Size and Electricity/ Gas requirement calculation.
[ I did plumbing projects with LEED platinum certification ensuring the most economical US Green Building Council Standard]
✅ 𝗥𝗲𝘀𝗶𝗱𝗲𝗻𝘁𝗶𝗮𝗹 𝗘𝗹𝗲𝗰𝘁𝗿𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻:
➤ Luminaries, Switches and Receptacle layout per NFPA and State Standard.
➤ Electrical Single Line Diagram and Raiser Diagram for Incoming Power.
➤ NEC Standard Electrical Load Calculation, Voltage Drop Calculation and Panel Schedule for all types of loads.
➤ Model Selection for all equipment including Load Centre, Metering Panel, Breaker Mains, Transformers and Lighting Fixture Models.
➤ Documentation for Authority Approval like Title 24 for California.
➤ Support for Sourcing and Procurement.
➤ Photometric Calculation and Lighting Simulation in 3D with DIALux.
[ Experienced in small to large scale electrical projects, from 1-family dwelling unit to Airport Terminal]
𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 𝗦𝗸𝗶𝗹𝗹𝘀:-
➤ Kwik Model with EnergyGauge Loads (Specialist Residential HVAC design per Manual J/S/D)
➤ AutoCAD MEP and Revit
➤ HAP-Carrier 5.1
➤ Duct Sizer
➤ Fire-Elite (Fire Hydraulic Calcs and Pipe Sizing)
➤ Pipe Flow Expert (Liquid and Gas Networks Calcs)
➤ Bluebeam Revu
➤ CBECC by the California Energy Commission
➤ MS Office
➤ DIALux for photometric calculation and Lighting Simulation
𝗖𝗼𝗱𝗲𝘀 𝗘𝘅𝗽𝗲𝗿𝘁𝗶𝘀𝗲:-
➤ National Fire Protection Association (NFPA): NFPA 72, NFPA 70, NFPA 13, NFPA 14, NFPA 20
➤ Building Energy Efficiency Standards (Title 24, LEED)
➤ ACCA Manual J/S/D
➤ Home Energy Rating System (HERS)
➤ Uniform Plumbing Code
𝗥𝗲𝗮𝗱𝘆 𝗳𝗼𝗿 𝗮 𝗖𝗵𝗮𝘁?
Contact me for a complimentary 30-minute consultation or sample plans.
$30/hr
100%
Job Success
$500K+ earned
Autodesk Revit
Building Information Modeling
Autodesk AutoCAD
3D Modeling
3D Rendering
Architectural Design
Adobe Photoshop
Drafting
I hold Masters Degree in Architecture from the USA and have 16 years of architectural experience with reputed firms in the USA and India. My experience includes single family/multifamily residential, commercial, institutional, hospitality and healthcare projects.
I can work with you on a project to develop preliminary design and concept sketches and take it further to design development and construction document stage. Skilled at coordinating architectural drawings with civil, structural, MEP, fire protection and landscape consultant drawings.
Have expertise in developing accurate and error free revit models and can produce complete SD, DD, permit and CD sets in compliance to international standards by utilizing Autodesk Revit. Can provide photo-realistic renderings, high quality visualizations and animations.
Extensive experience in working remotely. Highly skilled at conducting effective and transparent communication for smooth functioning of a project.
$40/hr
100%
Job Success
$10K+ earned
Autodesk Revit
Detailed Design
3D Modeling
2D Design
Interior Design
Building Information Modeling
Landscape Design
Autodesk AutoCAD
CAD Conversion
3D Rendering
Visualization
High-Quality Rendering
Drafting
BIM Coordination
BIM Implementation Plan
Award Winner Licenced BIM Architect/ +10 years Experience
Registered Licenced in Bavarian Community of Architects in Germany
Msc, Bauhaus univeristat Weimar/ Politecnico di Milano
$15/hr
$0 earned
Autodesk Revit
Project Management
Autodesk Navisworks
AutoCAD Civil 3D
Tekla Structures
Autodesk BIM 360
Point Cloud to BIM
BIM Implementation Plan
3D Modeling
Software Development
BIM Clash Detection
Web Application
Mobile App Development
4D Simulation
Facilities Management
I am an expert in a variety of software like Autodesk® (Revit, Civil 3D, Autocad, Navisworks, Forge, ACC, etc.), Rhinoceros and Grasshopper, Tekla Structures, and ArchiCAD.
I have been working in and around BIM since 2013 and have worked on BIM implementation, BIM management, BIM tool development, and BIM training.
We have a lot of experience working with Dynamo, Grasshopper, Forge, IFC, Point Cloud, COBie, and OpenBIM or developing digital applications on the Web, and Mobi based on client requirements.
I create, update, and revise architectural, structural, MEP models and drawings throughout the project life cycle based on point cloud data or PDF or CAD formats, and ensure the integrity and quality of BIM models based on BIM standards, ISO 19650—coordination of modeling, deliverables, and modifications with overseas colleagues.
I can work as a BIM modeler or BIM Manager in the infrastructure and residential/commercial/industrial real estate construction industry with a Master's degree focused on project management.
$4/hr
$0 earned
Available Now
Autodesk Revit
Autodesk AutoCAD
Dear Client,
With 14 years of experience as an MEP Draughtsman, I've contributed to a range of notable projects including King Saud University, the King Abdullah Financial District, Jeddah Airport expansions, and police station developments.
Using AutoCAD and Revit, I've ensured precise drafting and coordination, delivering on time and within budget. I'm eager to bring this expertise to your project.
Job Responsibilities
Create technical drawings, manufacturing schematics, and 2D and 3D digital models of mechanical equipment designs, using measurements, specifications, and additional data from the engineering team
Collect initial drawings, calculations, and design ideas from engineers, and combine all relevant data into coherent and complete initial design models for review and modification
Coordinate directly with engineers and project managers to understand project requirements, verify design details and recommend modifications as needed according to company standards and best practices
Annotate and verify all numerical designations and specifications in technical drawings and schematics, using both CAD programs and manual calculations when necessary
Communicate with manufacturing personnel to create detailed layouts prior to production, and assist in designing, creating, and testing production molds
Provide support to the engineering team as needed by creating technical drawings and digital models within deadlines and utilizing multiple methods to ensure deliverables include all relevant design details
Assist in ongoing project to standardize and unify design document standards by participating in meetings and preparing presentation materials as necessary
above I mention my duties and responsibilities. during the jobs I complete a different task such as plumbing and HVAC equipment takeoff. single-line digram.AHU pad setting architectural drafting etc......
Autocad is a general tool for drafting 2d and 3d modeling I can do anything 2d and 3d work.
Revit is building an information module.its make easier drafting and especially coordination-related issues solve very easy with the help of navis work. it can remove clashes very easily.
I can do Revit architectural model mechanical and plumbing services modeling and remove clashes.
Best Regard
Naveed ur Rehman
Mep Drafer
$10/hr
$0 earned
Autodesk Revit
Mechanical, Electrical & Plumbing Systems
Autodesk AutoCAD
CAD Drafting
I am an Experinced BIM Engineer.Having around 10+ Yrs of experience in BIM Modelling and Co-ordination.Able to do all the MEPF services and provide clash free model with detailed shop drawings.Worked in both Commercial and residential projects for US and Middle East Projects.Provide detailed model from BIM Level of LOD-200 to LOD-500.
My expertise is focused on
- Revit BIM Modeling (MEP) up to LOD 500
- Revit BIM Modeling (Architecture & Structure)
- 3D Coordination using Navisworks.
- CAD Drafting of all MEP Services
- CAD Drafting for Architecture & Structure
Software Skills : Revit,Autocad,Navisworks,Revizto
$15/hr
$0 earned
Autodesk Revit
Mechanical, Electrical & Plumbing Systems
MEP Design
AutoCAD HVAC Loads Calculations
HVAC System Design
Autodesk AutoCAD
Mechanical Engineering
Mechanical Design
Drainage
Fire Protection Engineering
Quantity Surveying
3D Drawing
3D Design
BIM Consultation
Autodesk BIM 360
I'm a mechanical Design Engineer , I've graduated since 2013. I've experience in design of Mechanical Works ( HVAC -FF - Plumbing) at construction fields.
$50/hr
$0 earned
Autodesk Revit
MEP Design
Mechanical Engineering
Mechanical Design
Electrical Drawing
Electrical Engineering
HVAC System Design
AutoCAD HVAC Loads Calculations
ANSYS
3D Modeling
3D Rendering
Autodesk AutoCAD
Autodesk Inventor
SolidWorks
Tekla Structures
Licensed State : CA, FL, NV, AZ, NJ, NY, OR, WI, WA, SC, NC, MD, OK, etc
NCEES Certified (EIT), with extensive experience in MEP and large-scale power systems design, analysis with over 18 years of excellent experience in handling MEP, Power System projects for Generation, Transmission and distribution. Having hand on experience in Front End Engineering Development and Detail Engineering Package for Transmission, Distribution Utilities and bulk power-consuming industries based on ITB, CDP & project specifications.
✅Offered Services:
1- Electrical Design and Drafting Services
2-PV Solar Plan Design
3-Fire alarm System Design
4-Lightning and Grounding System
5-MEP design and Drafting System
6-High Rise Commercial and Residential building
7-Project Management and Coordination
8- Communication system (PAGA, Telephone & CCTV)
9-BOQ (Bill of Quantity) & takeoff
10-Electrical panel, MCC Switchgear, & Switchboard
11-Procurement support, Quotation review, Specification/MR preparation etc.
✅Power System analysis using ETAP
I will provide a complete and comprehensive report along with the conclusions and recommendations for various scenarios of power system operations for your projects. My offer includes the following:
◈ETAP .OTI files
◈Single line diagram for HV/MV/LV
◈AC, DC(Hybrid) Load flow analysis
◈Short circuit analysis using IEC or ANSI standards as per the client requirements.
◈Relay Coordination and Arc Flash Analysis
◈Transient Stability analysis
◈Harmonic (THD) analysis
◈DC Systems, and Battery Sizing Calculations
◈Grounding Calculations for Substations (IEEE-80/2013)
✅Lighting Calculation
◈Interior Lighting (Residential and Commercial)
◈Exterior Lighting / Outdoor Lighting ((Residential & Commercial)
◈Office Lighting
◈Plant Lighting
◈Process area, switch rack Lighting
◈Sports Arena Lighting
◈Roads, Streets & Pathways Lighting
◈Multi-Storied Building Lighting
◈Warehouses & Work Spaces Lighting
I will provide you following documents and source files along with the project delivery
◈Exact Light Fittings and the location where you can buy in your country
◈Light Fitting (Fixture) Layout Plan
◈3D Rendering Images
◈Proper documentation with with DIALux Calculation report.
✅Software Skills
✦ AutoCAD
✦PowerWorld, DigSilent, ETAP
✦ Micro-Station
✦ MATLAB SIMULINK
✦SP3D
✦Navis Works
✦ Revit
✦EPLAN
✦CAD works
✦Navis Works
✦DIALux/DIALux Evo, Rulex, SketchUp
I will provide you professional and high-quality work, customer satisfaction is my top priority. You are invited to place your order now or contact me to discuss the project for amazing
David W. United States
$70/hr
$0 earned
Autodesk Revit
MEP Design
SolidWorks
ANSYS
Finite Element Analysis
MATLAB
Autodesk Inventor
Mechanical Engineering
Electrical Engineering
Electrical Drawing
HVAC System Design
AutoCAD HVAC Loads Calculations
Autodesk AutoCAD
Tekla Structures
ETABS
NCEES Certified (EIT), with extensive experience in MEP and large-scale power systems design, analysis with over 18 years of excellent experience in handling MEP, Power System projects for Generation, Transmission and distribution. Having hand on experience in Front End Engineering Development and Detail Engineering Package for Transmission, Distribution Utilities and bulk power-consuming industries based on ITB, CDP & project specifications.
✅Offered Services:
1- Electrical Design and Drafting Services
2-PV Solar Plan Design
3-Fire alarm System Design
4-Lightning and Grounding System
5-MEP design and Drafting System
6-High Rise Commercial and Residential building
7-Project Management and Coordination
8- Communication system (PAGA, Telephone & CCTV)
9-BOQ (Bill of Quantity) & takeoff
10-Electrical panel, MCC Switchgear, & Switchboard
11-Procurement support, Quotation review, Specification/MR preparation etc.
✅Power System analysis using ETAP
I will provide a complete and comprehensive report along with the conclusions and recommendations for various scenarios of power system operations for your projects. My offer includes the following:
◈ETAP .OTI files
◈Single line diagram for HV/MV/LV
◈AC, DC(Hybrid) Load flow analysis
◈Short circuit analysis using IEC or ANSI standards as per the client requirements.
◈Relay Coordination and Arc Flash Analysis
◈Transient Stability analysis
◈Harmonic (THD) analysis
◈DC Systems, and Battery Sizing Calculations
◈Grounding Calculations for Substations (IEEE-80/2013)
✅Lighting Calculation
◈Interior Lighting (Residential and Commercial)
◈Exterior Lighting / Outdoor Lighting ((Residential & Commercial)
◈Office Lighting
◈Plant Lighting
◈Process area, switch rack Lighting
◈Sports Arena Lighting
◈Roads, Streets & Pathways Lighting
◈Multi-Storied Building Lighting
◈Warehouses & Work Spaces Lighting
I will provide you following documents and source files along with the project delivery
◈Exact Light Fittings and the location where you can buy in your country
◈Light Fitting (Fixture) Layout Plan
◈3D Rendering Images
◈Proper documentation with with DIALux Calculation report.
✅Software Skills
✦ AutoCAD
✦PowerWorld, DigSilent, ETAP
✦ Micro-Station
✦ MATLAB SIMULINK
✦SP3D
✦Navis Works
✦ Revit
✦EPLAN
✦CAD works
✦Navis Works
✦DIALux/DIALux Evo, Rulex, SketchUp
I will provide you professional and high-quality work, customer satisfaction is my top priority. You are invited to place your order now or contact me to discuss the project for amazing
$80/hr
$0 earned
Autodesk Revit
Mechanical, Electrical & Plumbing Systems
MEP Design
Mechanical Engineering
Mechanical Design
HVAC System Design
AutoCAD HVAC Loads Calculations
3D Modeling
3D Rendering
Autodesk AutoCAD
ANSYS
SolidWorks
Autodesk Inventor
SAP2000
Electrical Drawing
NCEES Certified (EIT), with extensive experience in MEP and large-scale power systems design, analysis with over 18 years of excellent experience in handling MEP, Power System projects for Generation, Transmission and distribution. Having hand on experience in Front End Engineering Development and Detail Engineering Package for Transmission, Distribution Utilities and bulk power-consuming industries based on ITB, CDP & project specifications.
✅Offered Services:
1- Electrical Design and Drafting Services
2-PV Solar Plan Design
3-Fire alarm System Design
4-Lightning and Grounding System
5-MEP design and Drafting System
6-High Rise Commercial and Residential building
7-Project Management and Coordination
8- Communication system (PAGA, Telephone & CCTV)
9-BOQ (Bill of Quantity) & takeoff
10-Electrical panel, MCC Switchgear, & Switchboard
11-Procurement support, Quotation review, Specification/MR preparation etc.
✅Power System analysis using ETAP
I will provide a complete and comprehensive report along with the conclusions and recommendations for various scenarios of power system operations for your projects. My offer includes the following:
◈ETAP .OTI files
◈Single line diagram for HV/MV/LV
◈AC, DC(Hybrid) Load flow analysis
◈Short circuit analysis using IEC or ANSI standards as per the client requirements.
◈Relay Coordination and Arc Flash Analysis
◈Transient Stability analysis
◈Harmonic (THD) analysis
◈DC Systems, and Battery Sizing Calculations
◈Grounding Calculations for Substations (IEEE-80/2013)
✅Lighting Calculation
◈Interior Lighting (Residential and Commercial)
◈Exterior Lighting / Outdoor Lighting ((Residential & Commercial)
◈Office Lighting
◈Plant Lighting
◈Process area, switch rack Lighting
◈Sports Arena Lighting
◈Roads, Streets & Pathways Lighting
◈Multi-Storied Building Lighting
◈Warehouses & Work Spaces Lighting
I will provide you following documents and source files along with the project delivery
◈Exact Light Fittings and the location where you can buy in your country
◈Light Fitting (Fixture) Layout Plan
◈3D Rendering Images
◈Proper documentation with with DIALux Calculation report.
✅Software Skills
✦ AutoCAD
✦PowerWorld, DigSilent, ETAP
✦ Micro-Station
✦ MATLAB SIMULINK
✦SP3D
✦Navis Works
✦ Revit
✦EPLAN
✦CAD works
✦Navis Works
✦DIALux/DIALux Evo, Rulex, SketchUp
I will provide you professional and high-quality work, customer satisfaction is my top priority. You are invited to place your order now or contact me to discuss the project for amazing