AutoCAD 2D/3D Drafter – Existing Plan & Sections for 3 Culvert Sites

Summary I need an AutoCAD drafter (2D and 3D) to create plan views and sections for three culvert sites showing existing conditions. You will work from the survey point information I provide, supported by site photos and videos where useful. All drafting will be done in AutoCAD. I will transfer the finished work into MicroStation on my side for production use. This is a straightforward drafting job: use the points to build clear plan and section drawings that represent the existing site conditions. We will review and refine through comments. There may be more similar work later if this goes well, but right now this is the only job I have. Scope of Work - 3 culvert sites - Create plan views and sections showing existing conditions - Draft from survey point information - Use site photos/videos to help interpret the site where needed - All work in AutoCAD (2D/3D as required) I Will Provide - Survey points / survey data - Site photos and videos - Feedback and comments Deliverables - AutoCAD DWG files - Plan and section views suitable for production use - PDFs for review Estimated Effort - About 15 hours total (~5 hours per site) - Do not exceed 18 hours without written approval Requirements - AutoCAD 2D and 3D experience - Able to draft plan and section views from survey points - Civil / drainage / similar experience preferred but not essential - Clear communication and responsive to comments Working Arrangement 1. Start with Site 1 and agree the approach 2. I review and comment 3. Complete Sites 2 and 3 the same way 4. Issue final DWG + PDF To Apply Please include: 1. Examples of AutoCAD plan/section work (2D/3D) 2. Confirmation you can draft from survey points 3. Rough turnaround for 3 sites