Custom Pi KVM Solution Development

We are seeking an experienced developer to create a customized Pi KVM (Keyboard, Video, Mouse) solution tailored to our specific needs. The ideal candidate will have a strong understanding of Raspberry Pi hardware and software, along with experience in video streaming and remote access protocols. Your expertise will help us implement a reliable and efficient KVM solution for our project. If you have a passion for innovative tech solutions and hands-on experience in building similar systems, we want to hear from you! The equipment we specialize in selling and service are Siemens Pet CT Scanners. Monitor Project 1. Monitor Power from Poser Monitor a. We use Elspec power monitors that use an older web based monitor for viewing. It also has a Modbus for gathering data. We need this data brought into the system for graphing and viewing. 2. Monitor Temp and humidity a. This monitor should show temp and humidity in each location visually for the tech. While also sending the data to the system for graphing. b. These should be plugged into a power source, they will get forgotten and not recharged or battery replaced by the tech. c. The main computer/PI will be 10-60 feet from each sensor, so the data transmission needs to be thought through with this in mind. Some area’s are also in rooms that are lead lined. 3. Monitor Chilled water Temp/Flow/Level. a. Chiller is located in the belly of the mobile. b. Fixed site should possibly be monitored also. c. Cold weather – the ambient temp in the belly should be monitored also and connected to a heater and turned on a certain temp. 4. Connection to Server/Cloud a. We should always want to go through the best and most reliable source. Either through wifi/Wired or Cell is that isn’t available. Both have issue. b. Cell has issues in certain locations, and some networks it is too diQicult and problematic for us to go through. 5. Connection for PiKVM a. We usually put a cell connection into the piKVM, but that is hard to share with other devices. b. It might be easier to go through the network/Cell for this device and have it share with the PiKVM. 6. Gathering of data from ICS a. Graphing data from these data points from the ICS i. QC’s ii. Gantry Temps iii. Establishing highs and lows for warnings b. Storage of backups c. Software loads for systems. 7. Sensitivity of power for system/ UPS