Embedded Test Engineer (Hardware & Firmware Validation)

I am looking for an embedded test engineer to help test a custom hardware board. The board uses: 1. STM32F103 2. ESP32 3. Three TCD1304 CCD sensors 4. BLE communication with an iOS application I will provide the hardware board design files. Its fully ready for JLCPCB manufacturing. After get the board, the engineer get STM32 firmware, ESP32 firmware, and testing requirements. The job is to program the firmware and test the board. You must have: 1. ST-Link programmer 2. Multimeter 3. Soldering station 4. Mac computer 5. iPhone for BLE testing Responsibilities: 1. Solder components if required. 2. Inspect the PCB before testing. 3. Program the STM32/ESP32 firmware provided by me. 4. Verify the STM32/ESP32 firmware. if required should be able the join the meeting and debug together. 5. Test BLE communication with iOS application. 6. Follow the provided test procedure and record test results. 7. Report any hardware or firmware issues with clear details. 8. Perform basic debugging if a problem is found. To avoid junk proposals, please start your proposal with "NotAI" and please attach picture of your devices along with the proposal. Thank you!