Icon design

I have a rope manufacturing company that has a few "ready made" products where the rope has a spliced loop of some kind. There are four basic styles. I need a monochrome icon for each one. I can supply a pic but it won't let me post a link here You can see the attached sketch to see what I have in mind. A DOCKLINE is a rope that has a 12"=18" spliced eye at one end, and a whipping & heat seal cut at the other end. . These ropes are 10' to 50' in length An ANCHORLINE has a smaller spliced eye with a hard thimble installed inside the eye. The other end is like a dockline (whipped & sealed). These ropes are 50' to 300' in length, which is why I have the little Z break sketched in the middle of the line. A Fenderline is smaller than a dockline, and has a soft eye that is maybe 4" in length. Similar loop size to Anchorline, but no thimble, just a soft eye. Other end is whipped & sealed. A fenderline hangs vertically, hence the sketch. FEnderlines are usually 5' to 8' in length A Mooring Pendant is a hybrid. One end is like the splice loop of a dockline. The other end also has a spliced loop but it's small with a thimble, identical to the spliced hard eye on an anchorline. Mooring pendants may typically be 20' - 40' commonly, in length. The icons don't have to be single line, but I do imagine them as clean monochrome icons. In my head I see the blue safety circles kind of like ISO 7010. You know what file formats I need for use in Illustrator and insertion into .docx. Thank you!