Hire the Best Embedded Systems Engineers
in the United Arab Emirates

Hey! I’m an embedded systems engineer focused on firmware and PCB design for IoT and consumer devices. I work across microcontroller firmware, hardware design, and system integration to build reliable, production-ready electronics. I help clients turn complex electronics ideas into working devices that solve real problems. What I Offer: - Embedded firmware development for microcontrollers (STM32, ESP32, Nordic, PIC/ATmega) - PCB design & layout for analog, digital, and mixed-signal circuits - IoT solutions with wireless connectivity (Wi-Fi, BLE, LoRa) and OTA/FOTA updates - Prototyping, testing, and manufacturing support, including signal & power integrity checks - Smart system integration with AI/TinyML features for sensor analytics and automation - Industrial control support (PLC programming, SCADA, motor drives, CANBUS) as needed Skills: - MCUs & Firmware: Embedded C, Firmware, Embedded System, Microcontroller Programming, STM32, ESP32, Nordic, PIC/ATmega, RTOS - PCB & Hardware Design: Altium Designer, KiCad, mixed-signal PCB design, signal & power integrity, manufacturing support (experience with PADS and Cadence Allegro) - IoT & Wireless: Internet of Things (IoT), Wi-Fi, BLE, LoRa, Raspberry Pi, Arduino - AI & Smart Systems: Python, TinyML / On-device AI, Sensor analytics, IoT automation - Control Systems (Additional): Control Engineering, PLC Programming, SCADA, Motor Drives, CANBUS I combine hardware design, firmware, and system integration to deliver electronics that work reliably in the real world. My goal is to help clients build functional, production-ready devices efficiently and confidently.

Hello, I specialize in building reliable, high-quality IoT and Embedded hardware systems — from initial concept to full-scale production. My work focuses on RF engineering, PCB layout, embedded firmware development, and system integration for IoT, industrial control, and consumer electronics. I have deep expertise in tools such as Altium Designer, KiCad, Cadence Allegro, and Fusion 360, combined with strong knowledge of embedded systems, firmware programming, and wireless communication technologies (Bluetooth, Wi-Fi, BLE). I ensure every design is optimized for signal integrity, EMI/EMC compliance, manufacturability, and cost efficiency. - My Core Skills: Embedded Systems & Firmware – STM32, ESP32, ARM Cortex, AVR, PIC, Raspberry Pi, Arduino, Embedded Linux FPGA Programming – VHDL/Verilog Programming with Xilinx and InteFPGA Wireless & IoT Systems – Bluetooth / Wi-Fi / BLE hardware integration and firmware like ESP23 and etc. RF Engineering – SDR, Front-end, Antenna, Simulation, and RF system integration. Circuit Design & Simulation – Analog/digital design, signal integrity, power analysis PCB Design & Layout – Single/multi-layer, high-speed, mixed-signal, RF boards and power boards 3D & Mechanical Integration – Fusion 360 for enclosure and component fit Testing & Validation – Prototyping, debugging, and hardware optimization - Selected Past Projects: * IoT Smart Sensor Module – Designed a 4-layer PCB and developed ESP32 firmware with Bluetooth/Wi-Fi connectivity. * Custom SDR RF PCB – Designed a 20-layer PCB using Zynq Ultra-scale controller and added RF front-end and Antenna. Worked 600MHz ~ 6GHz frequency. * Industrial Motor Control Board – Developed control and power circuitry using STM32 MCU with real-time embedded firmware. * Wireless Data Logger – Created compact, low-power data acquisition hardware with BLE communication. * Consumer Audio Amplifier Board – Designed high-fidelity analog/digital PCB with minimal noise and distortion. I take pride in delivering clean, production-ready designs, clear documentation, and strong communication throughout every project. Whether you need a full product development cycle or support for part of your design, I’m ready to help you bring your hardware ideas to life. Let’s work together to turn your concept into a professional, manufacturable solution. Thank you for reading my profile.

Looking for a Product Development expert to turn your innovative ideas into reality? Or do you need a Hardware Developer to take your existing electronics to the next level? Whether it's a concept that needs to be fleshed out or a product that requires professional-grade electronics, you've come to the right profile. I am an Electronics and Electrical Engineer with over 6 years of experience in the Hardware and Electronics Design industry. My expertise spans from conceptual design to mass production, helping companies like Flux.ai, LiTrek, Simplifi Automation, UpLYFT Wearables, Microclimate Air, and Livello GmBH turn their ideas into successful products that have generated millions in revenue. I have extensive experience in developing hardware solutions that are not only innovative but also scalable for mass production. Areas of Expertise: Product Development: From concept to prototype, I specialize in taking a product idea and developing it into a fully functional and manufacturable design. Schematic and Multi-Layer PCB Design: Including part selection, sourcing, and generation of manufacturing files and documentation. Hardware Design: Analog and digital circuit design, microcontroller-based embedded systems, RF modules, GPS, Bluetooth, WiFi, and IoT integration. Mass Production: Expertise in scaling designs for large-scale manufacturing, including prototype testing, debugging, and design optimization for cost reduction and efficiency. PCB Reverse Engineering: Offering detailed analysis and re-engineering of existing designs. Embedded Firmware Development: Proficient in C/C++, Arduino, STM32, and other microcontroller platforms. PCB Design Software Expertise: Altium Designer KiCad Mentor Graphics Xpedition Proteus Flex PCB and RF Design Additional Services: Manufacturing Support: From initial designs to final production, I provide end-to-end support, including coordination with manufacturers like JLCPCB, PCBWAY, and ELECROW. Prototyping and Testing: I can handle everything from small-scale prototyping to large-scale testing and quality assurance. Global Shipping and Logistics: Need to ship your product worldwide? I’ve got that covered too. If you're looking to bring a cutting-edge product to market or need expert assistance with your hardware and electronics, don't hesitate to reach out. Let's make your vision a reality.

I specialize in: - Integrating AI/LLMs into high-performance C++ systems - Building real-time audio/video processing (WebRTC, streaming) - Optimizing blockchain and cryptocurrency applications - Developing embedded solutions for ARM/IoT

Software Engineer with strong experience building secure, scalable and high performance enterprise applications using C Sharp, .NET and ASP.NET Core. I specialize in backend engineering, REST APIs, microservices, distributed systems, cloud native applications and enterprise software development. I have hands on experience with Azure, Kubernetes, Docker, CI CD, SQL Server, Entity Framework Core, database optimization and modern DevOps practices. I also have full stack development experience with React, Next.js, JavaScript, TypeScript and Node.js, allowing me to work across both backend and frontend systems when required. Alongside my software engineering experience, I am actively building practical experience in AI Engineering and Generative AI. I have worked with AI Agents, MCP Servers, RAG systems, open source LLMs such as Llama and Qwen, LangChain, Pinecone, Azure AI Search, OpenAI APIs and Claude APIs. My focus is on combining strong software engineering fundamentals with modern AI technologies to build reliable and production ready intelligent applications. I am open to opportunities as a Software Engineer, Senior Software Engineer, .NET Developer, Backend Engineer, Full Stack Developer, AI Engineer or AI Software Engineer. I am particularly interested in enterprise software, FinTech, SaaS, digital transformation, cloud platforms and AI driven products. Core expertise C Sharp .NET ASP.NET Core REST APIs Microservices Distributed Systems SQL Server Entity Framework Core Azure Kubernetes Docker CI CD React Next.js Node.js TypeScript AI Engineering RAG AI Agents MCP Servers LLMs LangChain Azure AI Search Pinecone OpenAI Claude

I build production AI systems end-to-end : the model layer, the product around it, and the infrastructure it runs on. I work close to the primitives -packages, protocols, model APIs - and assemble upward instead of stacking heavy, brittle abstractions. Most of what I build runs on free tiers, open-source libraries, and direct API calls billed in cents. What I build: • LLM applications - RAG, agentic workflows, vision and multimodal systems • Full-stack B2B SaaS - auth, payments, dashboards, the whole thing • Autonomous agents - scheduled, event-driven, multi-step decision making • Automation pipelines - cloud and local, cron jobs, webhook chains, API integrations Most AI tools being sold right now are a UI on top of an API call. I work the layer below. Direct model access, open-source packages, lean infrastructure. The gap between building that way and stitching together SaaS subscriptions usually comes out to cents versus hundreds a month. If you need someone who can take an AI product from idea to deployed and working ; solo, fast, on both lean or complicated stacks - let's talk.