Hire the Best Embedded Systems Engineers in Ahmedabad, IN

I am a Senior Embedded Firmware Engineer with 11+ years of hands-on experience designing, developing, and optimizing reliable firmware for connected and embedded systems. I specialize in wireless communication technologies, low-level firmware, and embedded Linux, delivering production-ready solutions for consumer, industrial, and IoT products. 🔹 Core Expertise Wireless Technologies: Wi-Fi, Bluetooth Low Energy (BLE), Zigbee, Thread, Mesh networking Operating Systems & Platforms: Bare-metal, FreeRTOS, Embedded Linux Microcontrollers & SoCs: ESP32, STM32, Nordic NRF series, Renesas MCUs Application Processors: NXP i.MX 6UL, i.MX 8 series 🔹 Embedded Linux & Low-Level Development Linux device driver development Linux user-space application development Bootloader development and customization (U-Boot) Board bring-up, BSP development, and hardware debugging Experience with Yocto / Buildroot based systems 🔹 What I Deliver Clean, scalable, and well-documented firmware Robust wireless connectivity with optimized performance and power consumption End-to-end development: from board bring-up to production firmware Debugging and optimization using JTAG, logic analyzers, oscilloscopes Strong focus on stability, security, and long-term maintainability 🔹 Additional Strengths Deep understanding of MCU peripherals, memory optimization, and low-power design Experience working with cross-functional teams (hardware, QA, manufacturing) Comfortable with Agile development and version control (Git) Ability to quickly understand legacy code and improve existing systems If you’re looking for a reliable senior embedded engineer who can take ownership of your product and deliver high-quality firmware on time, I’d be happy to discuss your project.

I have almost four years of experience in the embedded systems domain, working with a wide range of microcontrollers, including STM32, ATmega2560, ATmega328P, ESP32, and microprocessors from leading vendors such as Texas Instruments (TI), DSP Group (DSPG), Raspberry Pi, and others. During the first two years, I worked extensively with microcontrollers in the robotics club, where I was responsible for designing the embedded firmware for various robots. The primary controllers we used in these projects were the ATmega2560 and STM32. Additionally, I worked on side projects involving the ESP32, where we successfully designed a fully functional robot controlled via a web interface over Wi-Fi. Since 2023, I have been employed at Matrix Comsec Pvt. Ltd., Vadodara, as an Embedded Software Developer. In this role, I design and implement robust embedded systems, specifically targeting ARM-based System on Chips (SoCs) from prominent vendors such as Texas Instruments (TI), DSP Group (DSPG), and others. My main focus is to develop complete embedded platforms tailored to meet specific product requirements, adhering to a comprehensive development lifecycle. This process begins with designing and implementing custom bootloaders to ensure efficient and secure system initialization. I then proceed with kernel optimization to improve performance, stability, and responsiveness. Additionally, I integrate essential libraries and frameworks into the root filesystem, tailored to the application's specific needs. Throughout this process, I collaborate closely with hardware and software teams to ensure seamless integration and optimal functionality for a wide range of embedded applications. As an engineer, I continuously strive to acquire and refine my skills. My expertise includes: - ESP32 series of SoCs (ESP32, ESP32-S2, ESP32-S3, ESP Cam module), ESP-IDF - ATmega series of SoCs (ATmega2560, ATmega328P) - Raspberry Pi - AM335x series of SoCs from TI - DSPG dvf991x series of SoCs If you hire me, you will gain access to a broad range of services and expertise all at once. I am highly confident in our potential for success together, as I am punctual, creative, and passionate about my work. I look forward to hearing from you. Thank you.

I have an experience of designing embedded products for 9 years, I have worked on customized boards for board bring up and device driver development, Network driver development and modification as per the needs, RF communication like WI-FI (up to IEEE802.11ac and with IEEE802.11s (wireless mesh network)) and other proprietary wireless modules like CC2500, CC1101, GSM, GPS. I have worked on Processors like Qualcomm Snapdragon 650, 670, 710, 845, 855, Zynq Ultrascale Plus from Xilinx, PXAxxx from Marvell semiconductor, Broadcom's bcmxxxx, NXP's Imx6 and imx7ul for Android of things os and embedded Linux with their proprietary protocols for communicating to cloud (weave, now firebase). In addition to this I have also worked on Intel Edison for product development. I have worked on micro controllers like STM32Fxx, STM8Lxx, Arduino, MSP430xx, Microchip, Marvell Semiconductor micro-controllers. Along with that I have an experience of designing Linux based applications using C/ C++ which can be scaled for different architectures. I also have an experience in designing Layouts of digital circuits containing micro-controllers and other peripherals of up to 16 layers using Altium. Basically I am an electronics and telecommunication engineer, I passed my graduation in 2012. I can design products from the scratch to the mass production. Here are the example. 1. Device driver developer for Qualcomm Snapdragon camera SoCs which includes ISP, ICP, JPEG,FD and Camera Request Manager drivers. 2. Given support to bring up the QSPI, SPI and RTC linux device drivers in Xilinx zynq and zynq ultrascale platform SoCs. 3. Gave support to SONY for their BSP and guided them to get the device certified in USB battery charging specification. 3. Compiling packages for router boards in Linux. 4. Weighing scale based process automation. 6. Pedometer using STM32F407 ARM+DSP processor. 7. Door Interlocking System. 8. Feather Touch Operated Switch. 9. RF ID access control. 10. Mouse Extenders based on PS/2 mouse and RS-485 protocol for. 11. Boom Barrier System based on ATmega16.

Computer Engineer with expertise in embedded systems, microcontroller programming, and device driver development. Skilled in Git, GitHub, and tools like Keil, Proteus, and EclipseSTM32Cube. Proficient in communication protocols (UART, I2C, SPI) and data structures. Proven track record in project management and problem-solving. Specialized in projects like Brain-Computer Interface Wheelchair and stop-watch control systems. Certified in ARM architecture, AVR microcontroller interfacing, and real-time operating systems. Engineering: ● Electrical Engineering: Power Systems, Circuit Design, Renewable Energy ● Control Systems: PID, Adaptive Control, Predictive Control ● Mechatronics: Embedded Systems, Robotics, Actuators ● Digital Signal Processing: Image Processing, Audio Signal Processing ● Sensor Networks: IoT, Wireless Networks, Data Fusion Robotics & Automation: ● Mobile Robotics: Autonomous Navigation, SLAM ● Path Planning: A*, Dijkstra, Genetic Algorithms ● Control Systems: PID, MPC, Fuzzy controller ● Sensor Integration: LIDAR, Vision Systems, GPS ● Filters & Estimation: Kalman Filter, Particle Filter

Firmware Development: nRF52840, nRF52832, nRF52, nRF51, STM32, ESP32, PIC16, PIC18, ARM, MSP430, stellaris, LPC, Atmel, Cypress, Renesas, Arduino etc. I have Experienced with BLE, WIFI, I2C, SPI, UART, Ethernet using micro controller. Android and iOS Application development.