Hire the Best MATLAB Developers

🎨 𝕮𝖗𝖊𝖆𝖙𝖎𝖛𝖎𝖙𝖞 𝖎𝖘 𝖒𝖞 𝖎𝖉𝖊𝖔𝖑𝖔𝖌𝖞 🎨 ⚙️ 𝕸𝖊𝖈𝖍𝖆𝖙𝖗𝖔𝖓𝖎𝖈𝖘 𝕰𝖓𝖌𝖎𝖓𝖊𝖊𝖗 | 𝕽𝖔𝖇𝖔𝖙𝖎𝖈𝖘 𝕯𝖊𝖘𝖎𝖌𝖓 | 𝕬𝕴 & 𝕸𝖆𝖈𝖍𝖎𝖓𝖊 𝕷𝖊𝖆𝖗𝖓𝖎𝖓𝖌 | 𝕮𝖔𝖓𝖙𝖗𝖔𝖑 𝕾𝖞𝖘𝖙𝖊𝖒𝖘 | 𝕰𝖒𝖇𝖊𝖉𝖉𝖊𝖉 𝕾𝖞𝖘𝖙𝖊𝖒𝖘 | 𝟑𝕯 𝕯𝖊𝖘𝖎𝖌𝖓 ⚙️ Greetings! I’m a results-driven Mechatronics Engineer with a proven record in robotics, automation, control systems, and AI-powered embedded design. I specialize in building complete intelligent systems—from concept and simulation to mechanical fabrication, coding, and deployment. 🔹 Core Expertise ✅ Mechatronics design, automation systems, and industrial control ✅ Robotics development (ROS2, Arduino, ESP32, Raspberry Pi, embedded C/Python) ✅ AI, computer vision, and machine learning integration (OpenCV, TensorFlow) ✅ 3D modeling & mechanical design (SolidWorks, Autodesk Inventor) ✅ Finite Element Analysis (ANSYS, static/dynamic stress, thermal) ✅ MATLAB & Simulink simulation for control and dynamic systems ✅ PCB design, sensors, actuators, microcontrollers, prototyping ✅ Additive manufacturing and 3D printing workflow optimization 🔹 Professional Journey Maintenance Manager – Spinning Factory: led automation upgrades, predictive maintenance systems, and production-line optimization. Co-Founder – Hyperyzed for AI Solutions: directed projects in AI-driven robotics, autonomous platforms, and 3D-printed mechanical systems. Robotics Manager – TOOLii Robotics: led design of a medical receptionist robot, integrating mechanical, control, and AI modules for the healthcare sector. 🔹 Technical Toolkit 🧠 AI & Computer Vision – Python, OpenCV, YOLO, TensorFlow ⚙️ Control Systems & Simulation – MATLAB, Simulink, PID, model-based design 💡 Embedded Programming – Arduino, ESP32, Raspberry Pi, STM32, I2C/SPI protocols 🛠️ CAD/CAE Design – SolidWorks, Autodesk Inventor, ANSYS 🧩 Robotics Frameworks – ROS2, URDF modeling, kinematics analysis 🔋 Prototyping & Testing – 3D printing (FDM/PETG), sensor integration, motion control 🤝 Client Focus & Delivery I bring full-cycle support—from concept ideation and mechanical modeling to firmware, AI, and final testing. Clients appreciate my clarity, structured communication, and commitment to reliable, on-time delivery. 🚀 𝕷𝖊𝖙’𝖘 𝖈𝖗𝖊𝖆𝖙𝖊 𝖙𝖍𝖊 𝖋𝖚𝖙𝖚𝖗𝖊 𝖔𝖋 𝖎𝖓𝖙𝖊𝖑𝖑𝖎𝖌𝖊𝖓𝖙 𝖒𝖆𝖈𝖍𝖎𝖓𝖊𝖘 𝖙𝖔𝖌𝖊𝖙𝖍𝖊𝖗! 🌟 📩 𝕽𝖊𝖆𝖈𝖍 𝖔𝖚𝖙 𝖙𝖔 𝖉𝖎𝖘𝖈𝖚𝖘𝖘 𝖞𝖔𝖚𝖗 𝖓𝖊𝖝𝖙 𝖗𝖔𝖇𝖔𝖙𝖎𝖈𝖘 𝖔𝖗 𝖆𝖚𝖙𝖔𝖒𝖆𝖙𝖎𝖔𝖓 𝖕𝖗𝖔𝖏𝖊𝖈𝖙.

I'm a Mechatronics Engineer specialized in automation, control systems, and data-driven engineering solutions. I focus on building real-world systems that combine hardware, software, and intelligent algorithms to solve complex technical problems efficiently and reliably. My experience spans industrial automation, robotics, embedded systems, machine learning, and quantitative modeling. I have developed PLC integrations, predictive algorithms, neural-network forecasting models, and power-electronics control systems, always prioritizing robustness, scalability, and measurable performance improvements. Some highlights of my work include: Designing a full Variable Frequency Drive system with real-time monitoring and ±5% speed accuracy. Building PLC communication architectures across industrial protocols (EtherNet/IP, Modbus, Profibus). Developing machine-learning models for anomaly detection and predictive analysis. Creating automated control tuning software that reduced calibration time and improved production efficiency. Processing hundreds of millions of data points to validate algorithmic systems at scale. I am comfortable working independently on technically demanding projects, communicating clearly with clients, and delivering production-ready solutions. I value clean architecture, well-documented code, and engineering precision. Core skills: Control Systems • PLC Programming • Python • MATLAB • Embedded Systems • Industrial Communications • Machine Learning • Data Analysis • Automation • Robotics • Power Electronics If you are looking for someone who understands both engineering theory and real implementation, I’d be glad to collaborate.

I help companies build latency-sensitive audio systems and performance-critical native applications for embedded, desktop, and mobile platforms. My core expertise is turning complex low-level requirements into reliable and scalable architectures and implementations. Project Highlights: 1. Roc Streaming — co-founded and maintain an open-source real-time audio streaming ecosystem. 2. ViveSound audio engine — co-founded ViveSound and implemented commercial engine for OS-level audio processing injection. 3. Internet audio streaming — built a streaming daemon for embedded Linux with guaranteed 40 ms Internet latency, forward error correction and packet loss concealment. 4. Airborne audio synchronization — built acoustic-signature-based synchronization, aligning network playback to over-the-air audio within 1-2 ms. 5. Distributed playback sync — built multi-receiver network playback synchronization with sub-millisecond precision over high-jitter Internet connection.

I am a Senior Power Systems Engineer specializing in **grid interconnection, compliance, and system impact studies** for **renewable generation, BESS, hybrid plants, conventional generation, and large industrial / data center loads**. I deliver **utility-, ISO-, and TSO-ready studies** using **PSS®E, PowerFactory, PSCAD, and ETAP**, covering the full range of technical assessments required for project development, connection applications, design review, and compliance demonstration. My work supports **Solar PV, Wind, BESS, Hybrid plants, conventional power facilities, and data centers**, with studies prepared in a way that reflects how utilities and system operators actually review **models, assumptions, plots, test evidence, and compliance conclusions**. I support clients from early-stage screening through submission-ready packages, including clear RFIs, defensible assumptions, clean technical plots, and structured reports suitable for utilities, TSOs, ISOs, developers, EPCs, and owners’ engineers. Core Services Grid Interconnection & Compliance Studies * Load flow and operating case assessment * Short-circuit / fault level calculations * RMS dynamic stability studies * Grid code and interconnection compliance benchmarking * Utility / ISO submission-ready technical reports * Model review, validation, and technical support during review cycles ### Renewable Generation / BESS / Hybrid Plants * Solar PV, Wind, BESS, and Hybrid plant interconnection studies * LVRT / HVRT / LFRT / HFRT assessment * Reactive power capability and voltage control performance * Frequency response and plant controller performance * Weak-grid assessment and control interaction review * PRC / MOD / MQT / G99 / G5 compliance support ### Data Center & Large Load Studies * Grid connection studies for **large industrial loads and data centers** * Load flow, contingency, and thermal capacity assessment * Point of interconnection screening and transfer capability review * Motor starting / dynamic load behavior review where applicable * Voltage stability and reactive power performance assessment * Large load ride-through and dynamic behavior assessment * Support for connection strategy, substation concept review, and utility-facing technical documentation ### Design & Engineering Support * Single-line diagrams (SLD) * Cable and conductor sizing * Grounding / earthing grid studies * Surge arrester selection and insulation coordination * Protection coordination and selectivity studies * Relay setting review and interface logic support ## Technical Services ### Short-Circuit Studies * Fault calculations to IEC 60909 and IEEE methods * Breaker duty and X/R ratio verification * IBR fault contribution assessment * Faulted operating condition evaluation ### Dynamic (RMS) Studies * Transient stability and oscillatory damping * Frequency response and control performance * LVRT / HVRT / LFRT / HFRT benchmarking * Weak-grid and controller interaction studies * Plant controller and model tuning support ### EMT Studies * IBR control interaction and converter dynamics * Fast transient and weak-grid EMT validation * Special operating scenarios and black-start studies where required * OEM / utility EMT model review and benchmarking ### Protection & Control Interface * Relay coordination support * PRC-019 interface checks * Voltage / frequency protection coordination with IBR controls * SCADA / Modbus / IEC 61850 signal and interface logic review ## Grid Codes & Standards Experience **United States** NERC PRC(029 024 019) & MOD(025 026 027 032) standards, ERCOT, PJM, NYISO, MISO, SPP, CAISO IEEE 519, IEEE 1453, IEEE 1547 ERCOT model quality and interconnection processes **United Kingdom** ENA G99 ENA G5/5 P28 / P29 DNO submission and acceptance support **Germany / EU** VDE-AR-N 4110 / 4120 FGW TR3 / TR4 / TR8 references Additional regions can be supported based on project documentation and applicable grid-code requirements. ## Software * PSS®E * DIgSILENT PowerFactory * PSCAD * ETAP * MATLAB / Simulink * AutoCAD ## Deliverables * Technical reports * RAW / DYR files * PowerFactory projects * PSCAD cases * ETAP models * Parameter summaries * Validation plots * Submission support documents ## Why Clients Work With Me * Clear scope definition from the start * Strong RFIs and efficient data collection * Technically defensible assumptions * Utility-ready reports and plots * Combined RMS and EMT capability I can support complete interconnection packages or single-study scopes, depending on project needs. If you have an RFP, grid-code requirement, interconnection document, utility feedback package, or study scope, I can review it and help define a clear technical approach, deliverables list, and schedule.

Hello there! I'm Reza Basafa, a Building Energy Modeling and Mechanical (MEP) Engineer specializing in high‑performance, energy‑efficient building design. I help building owners, developers, and construction teams achieve energy efficiency, sustainability, and high‑performance mechanical design. From meeting global standards like ASHRAE, LEED, IECC, NECB, BREEAM, WELL, Passive House, to conducting ENERGY STAR evaluations and supporting 179D tax deductions, I deliver solutions that reduce energy use, operational costs, and carbon impact. My expertise spans both Building Energy Modeling and Mechanical (MEP) Engineering, enabling me to provide integrated, data‑driven, and code‑compliant solutions for modern buildings. 🖥 Energy Modeling & Sustainability: 1- Energy modeling with EnergyPlus, DesignBuilder, IESVE, PVsyst 2- Compliance with ASHRAE 90.1, Title 24, NECB, NCC, UKBR, IECC 3- Energy efficiency strategies aligned with major programs and standards 4- Sustainability reporting: GRI, TCFD, SASB, UNGC, ISO 50001 5- IEQ assessments: daylight, thermal comfort, natural ventilation 6- Renewable energy integration and PV feasibility studies 7- Energy audits: ASHRAE 211, ISO 50002, ENERGY STAR 8- Carbon footprint reduction using GHG Protocol, ISO 14064 🏢 Building Mechanical Systems (MEP) Design: 1- HVAC system design: Chillers, Boilers, VRF/VRV, AHU, FCU, Heat Pumps, Package Units 2- Heating & cooling load calculations 3- Plumbing systems: water supply, drainage, hot water, rainwater 4- Fire protection: sprinkler, standpipe, pump sizing 5- Gas distribution systems 6- Full MEP modeling in Revit with clash detection 7- Equipment selection, BOQ, and technical specifications 8- Designs aligned with ASHRAE, SMACNA, NFPA, and international codes 🏊 Swimming Pool & Spa Design: 1- Hydraulic design for circulation, filtration, and water treatment 2- Heating load calculations & equipment sizing 3- Pump selection, piping layout, pressure loss analysis 4- HVAC design for pool halls and high‑humidity spaces 5- AutoCAD/Revit drawings and technical documentation 6- Compliance with global safety and performance standards 📊 Engineering Analysis & Automation: 1- FEM & CFD simulations (thermal, structural, fluid flow) 2- MATLAB‑based numerical modeling 3- Python automation for engineering workflows and data processing 4- Custom tools for simulation automation and reporting 📩 Let’s collaborate to bring your high‑performance, energy‑efficient building vision to life!

🔋 BESS, Battery Systems & Power Electronics Engineering I design and simulate battery systems and power electronics for real-world applications, combining system-level understanding with hands-on engineering experience. My background is in Energy Engineering, with a strong focus on: - Battery systems (design, modeling, integration) - Power electronics (inverters, control, system behavior) - MATLAB/Simulink simulation and control systems - Thermal and energy systems (thermodynamics, cooling) - PCB design and embedded hardware 🚀 Relevant Experience - Head of ePowertrain & Control at eUSRacing (MotoStudent Competition) → Led the design of a high-voltage battery system and its integration with inverter and motor systems - Developed inverter + FOC control simulations in MATLAB/Simulink - Battery modeling and performance analysis using Voltt (About:Energy) - Hands-on work with electrical systems, integration, and validation 🛠️ What I can help you with - Battery system design (BESS / EV-oriented) - MATLAB/Simulink modeling (power electronics, control systems) - Inverter and control strategy analysis (FOC, system dynamics) - Electrical system architecture and SLD support - PCB design and hardware integration - Technical problem solving in energy and power systems I focus on delivering clear, practical, and well-structured engineering solutions, especially in projects involving batteries, energy systems, and simulation. If you need someone who understands both theory and real implementation — I’m ready to help.