Upwork home
Sign up
Secondary

Hire the best AutoCAD Civil 3D Drafter

Check out AutoCAD Civil 3D Drafter with the skills you need for your next job.
Hire freelancers
Clients rate AutoCAD Civil 3D Drafter
Rating is 4.8 out of 5.
4.8/5
based on 1,329 client reviews
  • US$38 hourly

    • 4.9/5
    • (306 jobs)
    I value excellence, punctuality, and cost-effectiveness. I always strive that every project I undertake will lead to full customer satisfaction. My services include but not limited to the following: • site planning and landscaping • subdivision, mixed-use, and complex developments • design grading and drainage planning • determination of cut and fill volumes • roads and culverts design, layouts, and profiles • power, gas, and other utility layouts • temporary erosion and sediment control plans • stormwater, sewer, and water layouts and profiles • details and blow-ups • drafting and plans preparation • hydrologic or rainfall-runoff modeling • extreme event flow determination • 1D or 2D hydraulic modeling of natural streams or man-made conveyance • establishment of Base Flood Elevation (BFE), velocity, and depth at peak flows • design of Best Management Practices (BMPs) and Sustainable Urban Drainage Systems • post-development peak flow attenuation • discharge calibration and rainfall and flow data extension • surface water temperature, dissolved oxygen, and nutrients modeling • sediment yield and transport modeling I use the software AutoCAD, Civil 3D, Quantum GIS (QGIS), HY-8, Storm and Sanitary Analysis (SSA), Stormwater Management Model (EPA-SWMM), Hydraflow, MS Excel, Hydrologic Modeling System (HEC-HMS), River Analysis System (HEC-RAS), Runoff Routing (RORB), ReFH2, HydroCAD Get in touch and I will gladly serve you to my fullest.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    HEC-HMS
    Stormwater Management
    HEC-RAS
    Hydraulic Simulation
    Hydrology
    Hydraulic Engineering
    Drainage
    3D&SSA
    Subdivision Design
    Civil Engineering
    Hydraflow
  • US$100 hourly

    • 5.0/5
    • (18 jobs)
    Paige is a registered civil engineer/professional engineer (P.E.) in the State of California and a Certified Floodplain Manager (CFM). She has been working in the field of stormwater management and drainage engineering for over 10 years. Paige's expertise lies at the intersection of the built environment and the natural world. She has been involved in a variety of projects throughout her career including highway drainage projects, hydraulic modeling for dams and spillways, stream stabilization, floodplain mapping, fluvial studies, environmental compliance, stormwater best management practice (BMP) design, and watershed planning. She has also prepared numerous grading and drainage plans as well as hydrology reports/WQMPs. Paige holds a Master of Science (M.S.) degree in Biological and Agricultural Engineering from North Carolina State University and a Bachelor of Science (B.S.) degree in Environmental and Natural Resources Engineering from Purdue University with a Minor in Soil Science.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Specifications
    Project Plans
    ArcGIS Online
    Drainage
    Hydrology
    QGIS
    ArcGIS
    Civil Engineering
  • US$25 hourly

    • 5.0/5
    • (14 jobs)
    - Expert Civil3D user - Experienced Civil 3D designer in US site development projects - Site Plan Layouts - 3D Site plan renderings - Subdivision Lot Layouts - Storm and Sanitary Plan & Profiles using pipe networks - Grading using Civil3D feature lines - Vehicle swept paths using Civil3D vehicle tracking - Produce high quality engineering plan sets Software skills Civil 3D - Revit - Sketchup - Lumion
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Civil Engineering
    Stormwater Management
    Drafting
    Building Information Modeling
    Site Planning
    2D Design
    Autodesk AutoCAD
    3D Design
    CAD Drafting
  • US$100 hourly

    • 5.0/5
    • (112 jobs)
    🏆 TOP-RATED PLUS FREELANCER 🏆 ⭐⭐⭐⭐⭐ 5.0 ➡️ Looking for a great civil engineering project? Then click the green "INVITE TO JOB" button on the top right, or just click "HIRE NOW" and save some time ↗️ This is what my clients are saying: ⭐⭐⭐⭐⭐ "Carlos is always first class and I really enjoy working with him. His communication is top-notch, he meets all deadlines, and his skills are very strong. I would highly recommend Carlos to anyone." – Brian O. ⭐⭐⭐⭐⭐ "Carlos is an excellent engineer able to quickly turn around the work given. He did a really nice job with planning the road I intend to build." – Kendrick K. ➡️ Chartered Civil Engineer Specialist Designer, Member of the Institution of Civil Engineers in the UK (CEng MICE). Specialist in the following designs and 3D modelling: - Civil Engineering Designs and 3D Modeling - Site and Land Development Designs and 3D Modeling - Roadways Design and 3D Modelling - Storm Drainage and Sanitary Sewer Designs and 3D Modelling - Utilities Design and 3D Modeling, including water, gas, electricity, telecoms, etc. - Survey and Topography 3D Modelling and As-builts ➡️ Specialist Designer and Draftsman with Autodesk Civil 3D, 2D and 3D AutoCAD, Navisworks and ReCap. My Civil 3D specialisations include: - Civil 3D Surfaces - Civil 3D Gradings - Civil 3D Storm Drainage and Sanitary Sewer Pipe Networks - Civil 3D Surveys with Point Files and Point Clouds - Civil 3D Corridors, Alignments, Profiles, Cross-sections - Civil 3D Earthworks, Cut/Fill Volumes and Materials - Civil 3D Construction Drawings, Plots, Layouts, As-builts, etc. ➡️ Reliable, enthusiastic and passionate about engineering and problem-solving. A great communicator who always delivers on time to tight deadlines and within budget. Efficient and innovative Civil Engineer Specialist with a track record of experience in civil engineering. Responsible for design and coordination, as well as team management and development, training provider, client and stakeholders liaison, project management and construction site coordination. I have worked on projects ranging from feasibility studies, detailed design and construction. I have managed and delivered infrastructure projects for major public and private clients in the UK, Europe, Australia and the US ranging from £10millions up to £20billions. I will help you deliver your outstanding civil engineering projects, bringing added value to you and your clients. ➡️ Click the green "INVITE TO JOB" button on the top right, or just click "HIRE NOW" and save some time. I look forward to working with you! ↗️
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Point Cloud to BIM
    Site Plan
    Utility Design
    Building Information Modeling
    Autodesk Navisworks
    Engineering Design
    Civil Engineering
    Photogrammetry
    3D Design
    Autodesk AutoCAD
    3D Modeling
  • US$28 hourly

    • 5.0/5
    • (55 jobs)
    Civil Engineer with 5 years of active experience in commercial and residential projects located in US, extensive experience on project located in Texas. - Wide experience working in teams, able to make decisions and work under pressure. - Methodology and interpretation for new civil engineering & design manuals. - Coordination and delegation of tasks involving remote / hybrid / on-site work teams. - Analysis and interpretation of redlines/markups and requirements from clients. ✅Civil Engineering & land development services: 1. Full civil sets for commercial & residential developments . 2. Site plan layout & Utility plan. 3. 3D Gradings and Surfaces. 4. Flooding calculations and detention requirements. 5. Erosion Plan. 6. Demolition Plan. 7. Creation of 3D plan and profiles for storm, wastewater and pressure networks. 8. Produce high quality Civil plan sets. 9. Experience working on existing & proposed drainage plans. 10. Cut and Fill Volumes for Earthworks. ✅Software & Technology Proficiency: - AutoCAD, Civil 3D: Precision drafting, modeling, and design. - HydroCAD: Stormwater modeling and drainage design. - HEC-RAS: Hydraulic simulations and flood studies. - Storm & Sanitary Analysis Autodesk: Simulations of storm systems and peak flows. - HY-8: Analysis of culvert pipes - Vehicle Tracking Autodesk: Simulations of turn around and roads. - Google Earth Pro: Location, measurement and interpretation of existing conditions. - Blubeam PDF: Markups, PDF reading and modifications.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Site Planning
    Utility Design
    Utility Plan
    Hydraulic Engineering
    Hydraflow
    Land Surveying
    Site Plan
    Drainage
    Civil Engineering
    CAD
  • US$20 hourly

    • 5.0/5
    • (2 jobs)
    I am a Stormwater and Piping designer specializing in hydrologic and hydraulic modeling using AutoCAD Civil 3D, SWMM 5, EPANET, GIS, and other Software and technical Skills. I am familiar with the Rational Method for Peak Storm Events, SCS Unit Hydrograph Pond modeling, AutoCAD SSA, and Civil 3D. I am also skilled in Storm Sewer Analysis and impervious vs. Pervious calculations and can understand and interpret ISWM. Additionally, I have expertise in water quality calculations, experience conducting Drainage Reports, and familiarity with FEMA flood maps. I can model and develop concept plans for detention, open channels, and storm drains for various-sized projects. I also handle storm sewer inlet and pipe calculations. Proficiency in Microsoft Office products. With a strong background in land development design, I bring a unique blend of skills that allow me to seamlessly transition between multiple projects. My adaptability ensures that each project receives the attention and expertise it deserves. I am always eager to expand my knowledge and skills and am ambitious about learning and taking on new engineering tasks. I am used to having remote meetings with internal engineering teams to discuss budgets, timelines, project constraints, and solutions.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Hydraulic Simulation
    HEC-HMS
    HEC-RAS
    Civil Engineering
    Drainage
    Hydrology
    EPANET
  • US$45 hourly

    • 4.9/5
    • (9 jobs)
    I am a civil designer/drafter of 23 years and a Graphic Designer/Multimedia Specialist of 12 years. I acquire degrees for both fields. As a Civil Designer, I have produced many construction sets that includes civil site plans, erosion control plans, layout plans, plan and profiles for water lines, storm sewer and sanitary sewer pipes, detail sheets , demolition plans, grading plans, traffic control plans and any other required plan sheets. I have a clear understanding of civil design work. I also have experience in Civil 3D producing surfaces, vertical and horizontal alignments, cross-sections, simple corridors, proposed surfaces and calculating fill and cut by comparing existing and proposed surfaces. I understand coordinate systems and how they work. I have worked on several major projects: Kansas Speedway, Sprint/Nextel Communication Expansion, Grandview Triangle Development (Kansas City, Mo), Jacob's Creek Redesign, Kansas City Streetcar, Williams Fiber Optic Communication and many more! As far as other disciplines, I can do any 2D work. As a Graphic Designer and Multimedia Specialist, I have the ability to develop crispy, clean, vector design with high resolution for logos, business cards, envelopes and letterheads, banners, websites , mailers, flyers, ads and more! On the multimedia side, I can create animation, digital photo albums, conversion of audio/video, conversion of vhs to dvd/digital and more!
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Adobe Premiere Pro
    Adobe Dreamweaver
    Adobe Encore
    Adobe Fireworks
    Adobe Flash
    Adobe Photoshop
    Adobe Illustrator
    Adobe InDesign
    Autodesk AutoCAD
  • US$55 hourly

    • 4.8/5
    • (41 jobs)
    Over 25 years of experience in the Civil Engineering/Architectural/Construction field using Autocad Civil 3d, Trimble Sketchup, and ArcGIS. Whether my profile says it or not, I am usually available to take on new project work. My main area of CAD expertise is Civil Design, with advanced knowledge in all aspect of the drafting/design/production of civil projects. I have solid experience in the Construction and Architectural fields as well, which gives me a wide range of tools to help complete your project. * I am not a licensed Civil Engineer, or a Registered Architect. * A couple of projects I have worked on in are: -Worked on multiple large projects at a private 400 acre College in Pennsylvania performing tasks from deed research, plotting the boundary, inputting existing conditions and utility mapping. I worked on the design of a large parking area creating stormwater management, and erosion control measures. Also, design for a large building addition on campus, performing site grading and plan and profiles. I incorporated the Architectural plans in to this as well, helping to determine utility layout. -Current working projects: Airport Rehabilitation project, Light Manufacturing Site Layout and Design, 34 Acre Subdivision Layout and Design. I have multiple long term Upwork clients that utilize me on an as needed basis. Feel free to message me with your project needs. Expertise: Civil Design Site Layout Architectural Design Autocad Civil 3d Sketchup Excel
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Architectural Photography
    Cost Estimate
    Management Skills
    Civil Engineering
    GIS
    SketchUp
  • US$25 hourly

    • 5.0/5
    • (16 jobs)
    I'm an experienced Civil designer with different project types behind my back. Started in 2018, and made a way from mechanical designer for lab equipment to Architectural and Structural designer for residential building objects, commercial building objects, infrastructure objects and urban planning. I can provide you a fully described design projects which will include all the information about construction, style, parametric connections, etc. And you can get a beautiful render for your project description for every project type. Interior and exterior for static objects and passing video for infrastructure objects for viewing how it goes! Thanks and You're Welcome!
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    BIM Template
    BIM Family
    BIM Coordination
    Structural Drawing
    Construction Estimating
    Road Design
    Cost Estimate
    Structural Engineering
    Civil Engineering
    Texture Mapping
    Rendering
    Architectural Design
    Autodesk Revit
    Autodesk AutoCAD
  • US$40 hourly

    • 5.0/5
    • (15 jobs)
    Civil 3d designer with 15 years of experience. I've worked with Cad, Civil 3d, Infraworks, GIS as well as all the standard computer software programs. I specialize in - Land development plans, existing condition plan, site plans,grading plans, drainage and utility plans, 3d utility networks, surface creation, 3D plans. If your looking for work in the civil engineering field I can help!
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    ArcGIS
    GIS Software
    CAD Drafting
  • US$15 hourly

    • 4.9/5
    • (24 jobs)
    Dedicated and hardworking GIS analyst with 15 years of experience working with Geospatial/GIS data, ArcGIS software and Remote Sensing, data extraction, and creation. Highly knowledgeable of remote sensing data (Satellite Imagery, Aerial Photogrammetry, and LiDAR). Cooperate with a variety of people to achieve results.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    ChatGPT Prompt
    360-Degree Video
    Data Analysis
    GIS
    Data Extraction
    GIS Software
    ArcGIS
    Mapinfo
  • US$90 hourly

    • 4.9/5
    • (16 jobs)
    Skilled and Licensed Engineering Team in 30 states: AR, AZ, CA, CO, CT, FL, GA, HI, ID, IN, IO, IL, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS, MT, NC, NH, NJ, NM, NV, NY, OH. Bringing over ten years of immersive experience to the table, I'm a seasoned leader in orchestrating and overseeing construction projects spanning residential, industrial, and commercial sectors. My forte lies in cultivating synergy within adept teams, ensuring the seamless delivery of rapid and impeccable solutions. I boast the expertise required to meticulously formulate, authorize, and finalize engineering documentation, distinguished by the esteemed PE mark, guaranteeing official validation. - My Services: • Civil & Structural Engineering • Architectural Design and consent diagram • Mechanical Engineering concept and consent outlines. • Electrical Engineering concept and consent outlines • MEP Engineering Concept of Residential, Industrial, and Commercial ventures. • Plumbing service. • Full potentiality to assemble a thorough set of construction diagrams and specifications for authorization/office review and PE stamping. • CAD modelling (SolidWorks, Solid Edge, Autodesk Inventor, Fusion360)
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Civil Engineering
    HVAC System Design
    MEP Design
    Landscape Design
    Autodesk AutoCAD
    Autodesk Revit
    Architectural Design
    Structural Analysis
    Structural Calculation Sheet
    Reinforced Concrete Structures
    Wooden Structure
    Structural Detailing
    Structural Engineering
  • US$50 hourly

    • 4.7/5
    • (26 jobs)
    I have years of experience in Civil 3D and Revit on a wide variety of projects. Such as residential, commercial and industrial.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Civil Engineering
    Architectural Design
    Autodesk AutoCAD
    Autodesk Revit
  • US$75 hourly

    • 5.0/5
    • (10 jobs)
    Expert in 3D-Grading, Detention Pond design and Analysis, Retention pond design, hydraulic design and flood plain analysis. Proficient in Report writing and water quality modeling. Permitting expert.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Transportation Engineering
    Storm Water Management Model
    Hydraflow
    Hydrology
    Drainage
    Wastewater Management
    LEED Consulting
    Civil Engineering
  • US$70 hourly

    • 5.0/5
    • (147 jobs)
    I am an expert in 3d surface modeling using Civil 3d, especially grading and corridor modeling. I can help you with all site design and stormwater/flood modeling problems you have. Experienced in: -Civil 3d -Site grading -Road design -Stormwater, sewer, and water management plan -Detention pond design -Commercial/Residential lot subdivision -Flood modeling -Water network modeling -GIS applications
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Hydrology
    Drainage
    Hydraulic Engineering
    HEC-HMS
    Storm Water Management Model
    Stormwater Management
    HEC-RAS
    Subdivision Design
    QGIS
    Road Design
    Hydraflow
    Site Planning
  • US$25 hourly

    • 4.5/5
    • (28 jobs)
    Solar Energy simulation, Estimation, Engineering design, prebid engineering, Aotocad, PV layout, Single line diagram, wiring diagram, Detailed engineering, cable and component selection sizing, power system, switchgear, LT, HT panel sizing, Module selection, Mounting structure, STAAD report, Rooftop, ground mounted, Floating solar, On grid/Offgrid system, String inverter, central inverter, Bill of quantity, earthing, PVsyst, Helioscope, Financial analysis, SAM, plant prediction, proposal engineering. AC & DC Single line diagram Calculations & Schedule Solar PV layouts by using PVcase and land topography, Environmental assessment reports for USA projects, • String sizing calculation • DC string cable schedule & Calculation • LT cable schedule & sizing calculation • Battery Sizing for the Pump • System Loss Calculation Array Yard Drawings • Array layout Recommendation of Vendor (Tech Specs.) • All Electrical related drawings • All civil related drawings Review of Vendor Documents/ Drawings • All Electrical related drawings • All civil related drawings Bill of quantities • Electrical • Civil
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Solar Energy Simulation
    Solar Farm Design
    Aurora Solar
    PVSyst
    Helioscope
    Solar Energy
    Solar Design
  • US$25 hourly

    • 4.9/5
    • (305 jobs)
    🏆 Top-Rated PLUS / Vos3d.com Best in technical, analytical and problem-solving skill. To provide quality design services to clients worldwide and to provide an outlet for gifted individual to exercise my creative talent. To grow as a global design service provider through continued exposure to a myriad of design tools and techniques obtained upon working with clients from around the world. My specialties are: - CAD - Sketchup - Revit - Drafting - Landscape design - Vray - Lumion - Interior - 3D modelling - 3d rendering(image/animation) - Point Cloud - Virtual staging - Graphics Design - Photo Editing - Sketch - Chief Architect - Revit - 3ds Max - C4D - Product design - Industrial design
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Construction
    Engineering Design
    V-Ray
    Lumion
    Sketch
    Autodesk AutoCAD
    Autodesk 3ds Max
    Autodesk Revit
    SketchUp
    Adobe Photoshop
  • US$20 hourly

    • 4.9/5
    • (26 jobs)
    Antonio will make use of all of his acquired knowledge and abilities, impart wisdom and philosophy, and fairly fulfill his given duty. I can visualize thoughts and designs well, and I welcome challenges. He has worked on large-scale industrial projects including cement, poultry processing, power and solar, feed mills, flour mills, cement grinding, and poultry/hog farms for more than 8 years. His areas of expertise are land development design and structural detailing for both concrete and steel structures. Engineering services I can offer as follows; - Site Grading design with Topographic Map - Earthwork Volumes (Cut and Fill) - Cut and Fill Map - Alignment and Section Profiles - Retaining structure and Slope Protection design - Roadworks design - Fence design and Layout - Solar PV Array Earthworks - Drafting and detailing preparation of plans Softwares I used as follows; - Autodesk AutoCAD - AutoCAD Civil 3D - Google Sketchup - Google Earth - Microsoft Excel - Bentley STAAD Pro Thank you and God bless us!
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Road Design
    Drafting
    Storm Water Management Model
    Site Planning
    Civil Engineering
    Structural Engineering
    Drainage
    CAD Drafting
    Autodesk AutoCAD
    ArcGIS
  • US$60 hourly

    • 4.9/5
    • (37 jobs)
    Engineer with professional experience at the utility and residential scale of the design and construction install of solar PV systems. I have lead the CAD design on projects in Texas/California as large as 1 GW in with the EPC contractor Primoris Renewable Energy. I use automation to reduce cycle time in the solar design process At Sunrun I have lead the design on as many as 200 projects in a year summing to over 1 MW of installed capacity over 8 different states in the NE USA. I add value to my team through understanding the fundamentals of the solar resource, the design process, and the issues that can arise in construction and combining that knowledge with cross process automation between CAD and Excel (LISP-VBA) to increase efficiency and decrease labor/cycle time. I consider myself to have excellent communication skills working with estimating, procurement, project management, EOR and construction teams to bring projects to the finish line as problems arise and maximize the effectiveness of our teams process developments
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Lisp
    Hydrology
    Solar Energy
    Visual Basic
    PV System Design
  • US$25 hourly

    • 4.8/5
    • (3 jobs)
    CIVIL ENGINEER that has consulting and contracting experience for more than 5 years in Philippines projects, Saudi Arabia projects and currently in Nevada, USA for roads and site development (esp. Subdivision Projects) I have been using CIVIL 3D in all facets of roads and land/site development: -convert survey points from excel to cogo points to form a topographical surface. -moving and rotating cogo points using Translate Survey Database. -land grading for site preparation, house plans and subdivisions. -land development quantity takeoffs such as asphalt/concrete pavement, curb, sidewalk and sitework cut & fill for earthworks volume, -design of roads in Civil 3D by assigning speeds and generating superelevations as per AASHTO. -generate longitudinal plan and profile of roads. -generate cross-sections of roads every 12.5meters, including road materials and earthworks volume -create grading for parking lots and intersections (junction T-intersections and Roundabouts). -road widening and intersection improvement/widening. -create customized cross-sections using Civil 3D Sub-assembly composer that is not available in Tool Space of Civil 3D. -pipe network, surface catchment and flow path creation and export to SSA(Storm and Sanitary Analysis) for hydraulic analysis and design. -underground utilities design (storm, sanitary and watermain) for subdivision. plus skills -storm and sanitary drainage design using Autodesk SSA (Storm and Sanitary Analysis) -experienced in creating Civil 3D solids of roads and convert it to nwc file for Navisworks 3D viewing. -excellent experience in drafting using Autocad. Can perform sheet sets and publish pdf of multiple cross-sections and longitudinal profile of roads. -pdf to cad conversion
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Drafting
    Mathematics
    Autodesk Navisworks
    Site Planning
    Civil Engineering
    Hydrology
    Drainage
    Subdivision Design
    CAD Drafting
    Autodesk AutoCAD
  • US$55 hourly

    • 5.0/5
    • (10 jobs)
    Professional Civil Engineer (PE) licensed in Texas, New York and Georgia with 10+ years of experience in designing commercial, institutional, and industrial site development, roadway, street design, utilities, drainage, stormwater management, erosion and sediment control, hydraulic and hydrological modeling, flood studies, parking lots, sidewalks, curb ramps, and ADA ramps design, retention, and detention ponds projects. Credentials include Master of Science in Civil Engineering and obtained PE license from Texas Board of Professional Engineers and Land Surveyors. Proficient user of AutoCAD Civil 3D, Bentley OpenRoads, InRoads, ArcGIS, PTV Vissim , and SAP2000. Completed more than 69 projects, including large scale of highway and site design work. My services include but not limited to the following: •Site design - industrial, commercial, residential, institutional • Grading, site planning, and land development • Drainage plans • Sewage and water supply network design - Plan and Profiles - Pipe Sizing - Flow Calculations - Utility Crossing Conflict Analysis • Erosion & sediment control plans • Hydrology report and hydraulics calculations - HydroCAD modeling for report - Watershed modeling - Generating unit hydrographs - Retention & detention ponds design - Strom trap facilities design • Roadway corridors, assemblies, alignments, profiles, and cross-sections • Parking lots, sidewalks, curb ramps & ADA ramps design • Delivery trucks, fire trucks access ways evaluation & turning movements • Creating topographic maps from survey data • Flood risk assessments • Slope analysis • Earthworks, cut/fill volumes, and material take off's • Quantity estimates and takeoff • Construction drawings, plots, layouts, as-builts • AutoCAD 2D plans, plots, layouts, drawings • Streamline and catch basin analysis • Culvert and ditch sizing and analysis • Creating traffic control & staging plans • Design of highways and streets, including roadway alignments and profiles, signing and striping, paving, and grading • Researching necessary standards, specifications, and codes for design • Landscape developments
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Python
    Visual Basic
    Visualization
    CAD Software
    Interior Design
    Autodesk 3ds Max
    Microsoft Project
    3D Modeling
    CAD Drafting
    3D Design
    ArcGIS
    MicroStation
  • US$55 hourly

    • 4.8/5
    • (27 jobs)
    I am a Professional Engineer licensed by the Florida Board with over 10 years of experience in civil and land development, gained through working at reputable engineering companies. My dedication and passion drive me to provide the highest quality service to my clients. My expertise lies in civil CAD engineering, specializing in the following areas of engineering design and 2D/3D visualization: Grading, Site Planning, and Land Development Designing Roads and Highways Quantity Estimates and Takeoff Within the realm of engineering design, I have honed my skills in the following areas: Site Planning Creating 3D Visualizations and Renderings of Site Plans Executing Site Grading Designing Roadway Corridors, Alignments, Profiles, and Cross-sections Developing MOT Plans (Maintenance of Traffic) Conducting Vehicle Simulation and Swept Path Analysis Managing Construction Earthworks, including Cut/Fill Volumes and Materials (Division 31) Creating Construction Drawings, Plots, Layouts, and As-builts Producing AutoCAD 2D Plans, Plots, Layouts, and Drawings With my extensive experience and specialized skills, I am well-equipped to deliver exceptional engineering solutions to meet your project's requirements.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Site Plan
    Geometric
    Civil Engineering
    Site Planning
    CAD Software
    CAD
    Autodesk AutoCAD
    3D Modeling
    MicroStation
  • US$38 hourly

    • 4.7/5
    • (44 jobs)
    Any type of 3D Civil modeling for survey, site planning or construction needs. Client satisfaction is 100% the goal.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Drafting
    Material Take-Off
    Point Cloud to BIM
    Civil Engineering
    Site Planning
    Drainage
    Survey
    Landscape Design
    Survey Design
    Autodesk AutoCAD
    CAD
    CAD Drafting
    3D Modeling
  • US$10 hourly

    • 4.9/5
    • (45 jobs)
    Hi There, I am Chandra Nagesh, Having 15+ Years of Experience in Architectural and Structural services. Presently I am working for US, Canada, UK, Australia, and Switzerland. Areas Served Residential Buildings | Commercial Buildings | Industrial Buildings High-Level Services Offered Architectural Design & Drafting | Structural Design & Drafting | 3D Rendering | BIM | CAD Conversion | Calculation Reports Generation For Engineer Review I Detailed Services Offered • Utility Plans • Site Maps • Floor Plans • Sections • Elevations • Construction Documents • Staircase Details • Kitchen Specifications • Sanitary Details • Scaffolds etc… • Paper To CAD / BIM / Revit • 3D Modeling and Rendering Softwares Handle • AutoCad • Revit • Archicad • Allplan • Vectorworks • Lumion I would like to offer my services to your company and am more than willing to get in touch with you to interact about any possible business relationship that I can get into. Please feel free to reach out to me if you have any queries or if you would like to know more about my services. I look forward to a wonderful and fruitful working relationship in the future. Thanks & Regards Chandra Nagesh Dream Home Engineers Pvt Ltd
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Autodesk Architecture
    Architectural Rendering
    Point Cloud to BIM
    Autodesk BIM 360
    Twinmotion
    Marketing Plan
    Allplan
    Floor Plan Design
    Chief Architect
    Autodesk Revit
    Interior Design
    Archicad
    VectorWorks
    Autodesk AutoCAD
    Lumion
    3D Rendering
  • US$30 hourly

    • 5.0/5
    • (18 jobs)
    Hello. I'm Valeriy Turov I have been working in the engineering industry for more than 5 years and have experience working on real-time manufactures in Ukraine. Why will you need to choose me? - I am totally love engineering job - Ability to work 7 days a week, 13 hours a day - Post Project support SERVICES: - 2D Draftings (All your sketches and ideas will be implemented in compliance with the standards of your country ANSI, ISO, DIN) - 3D Modelling (Difficult surface modeling, Various mechanical components, Light metal construction, Wrought irons, Metal castings, Products from plastic and metal, Scale models, Modeling results adaptation to manufacturing) - Reverse Engineering (From 3D Scanning technology, From Pictures, From Videos, Comprehensive understanding of engineering and design principles, Rational using of CAD/CAM/CAE in design production, Converting of formats) - 3D Inspection (Checking reference geometry with real geometry. Providing reports in popular formats, 3D Comparison, 3D Animation) Computer skills proficiency: Windows, MS Office, SolidWorks, KOMPAS, T-FLEX, Geomagic Design X, Geomagic Control X, GOM Inspect, SW Simulation, LVMFlow, NovaFlow & Solid, ProCast, PoligonSoft, CAMWorks, ArtCAM, Materialise Magics, MeshLab, Blender, and others. P. S. I can not show a lot of good projects in the portfolio under the terms of the contract. But do not doubt my skills.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    3D Scanning
    KeyShot
    Reverse Engineering
    Geomagic Design X
    CAD Conversion
    3D Printing
    3D Modeling
    Autodesk 3ds Max
    3D Rendering
    SolidWorks
  • US$25 hourly

    • 5.0/5
    • (10 jobs)
    I am David Camacho, an architect and interior designer with more than 13 years of experience and proven professional trajectory. My constant devotion for the graphic representation of ideas in the real estate sector and efficient project management, has allowed me to evolve into a highly qualified professional, which differentiates me greatly from a common graphic artist. Always offering high quality standards and efficient response times, I tend to collaborate with real estate and construction companies around the world, who require professionals with high analytical capacity and skills in the architecture area, especially in the interior design field and development of photorealistic 3D rendering. As a user of multiple design software, I feel special inclination for Autodesk products (such as AutoCAD, 3ds Max and Revit), being this brand my favorite one for the elaboration of: • Architectural plans and construction details. • Building renderings and interior design proposals. • Virtual tours for the real estate field. If you are interested in knowing a little more, you can always check my portfolio and visualize some samples of my work. So, do you think my skills could be the key to achieve extraordinary results? If so, don't hesitate to contact me. I hope to hear from you soon!
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Landscape Design
    Architectural Design
    Interior Design
    Autodesk AutoCAD
    3D Design
    3D Modeling
    Adobe Photoshop
    Autodesk 3ds Max
    3D Rendering
  • US$45 hourly

    • 5.0/5
    • (8 jobs)
    I have over 12 years of professional experience as a Civil 3D Team Leader and Civil Engineer. Well versed in production of shop drawings for bridges, interchange and underpass and layout for sanitary and drainage systems. Can adept in preparation of topographic plans, profiles and sections for road and highway projects by use of AutoCAD Civil 3D. As a licensed Civil Engineer with expertise in construction management and site supervision. Carry out earthworks for horizontal and vertical projects.
    vsuc_fltilesrefresh_TrophyIcon AutoCAD Civil 3D
    Drafting
    Civil Engineering
    Autodesk AutoCAD
  • Want to browse more freelancers?
    Sign up

How it works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a AutoCAD Civil 3D Drafter on Upwork?

You can hire a AutoCAD Civil 3D Drafter on Upwork in four simple steps:

  • Create a job post tailored to your AutoCAD Civil 3D Drafter project scope. We’ll walk you through the process step by step.
  • Browse top AutoCAD Civil 3D Drafter talent on Upwork and invite them to your project.
  • Once the proposals start coming in, create a shortlist of top AutoCAD Civil 3D Drafter profiles and start to interview.
  • Hire the right AutoCAD Civil 3D Drafter for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a AutoCAD Civil 3D Drafter?

Rates charged by AutoCAD Civil 3D Drafter on Upwork can vary with a number of factors including experience, location and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a AutoCAD Civil 3D Drafter on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance AutoCAD Civil 3D Drafter and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream AutoCAD Civil 3D Drafter team you need to succeed.

Can I hire a AutoCAD Civil 3D Drafter within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive AutoCAD Civil 3D Drafter proposals within 24 hours of posting a job description.

Schedule a call

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.