Hire the best Hydraulic Engineering Freelancers in Pakistan

Check out Hydraulic Engineering Freelancers in Pakistan with the skills you need for your next job.

Get started

$10 hourly
Haider H.
- 4.6/5
- (6 jobs)
Master degree in hydrology, having more than 10 years of related work experience, preferred i roadway, bridges, and dam Technical proficiency in the field of roadway drainage design, hydraulics and hydrology analysis, erosion and sediment control/scour protection design, flooding assessment/ flood plain maps definition, and stream restoration projects, watercourse diversions , ponds design , Hydrology analysis /catchment delineation/ streamlines definition using the Arc Gis software tools, Hydrology analysis on HEC HMS software and hydrograph and peak flow estimation, Culverts design using the FHWA HY8 software, the hydraulic modeling on HEC RAS will be preferred, River/Wadi bridge hydraulic modeling on HEC RAS software and scour depth definition at pier and abutments, and Dam break analysis on HEC RAS software, Operating drainage design software (example SWMM or similar software) and preparation of spreadsheets for calculation of longitudinal drainage, dissipators, diffusion ditch , etc. Knowledge/awareness of international design standards and code of practices such as AASHTO, AREMA, BS EN 752, US SCS NRCS-NEH Part 630, HEC 14, HEC 18, HEC 23, HEV 22, FHWA HD2 and HD5, NCHRP -Report 587/ and report 593 . Good supervision and management skills.

Hydraulic Engineering
GIS
Wastewater Management
HEC-HMS
Hydrology
Hydrogeology
HEC-RAS
Civil Engineering
QGIS
ArcGIS
$25 hourly
Anwar M.
- 4.9/5
- (5 jobs)
I am a Civil Engineer specialising in Hydraulic Engineering with 7 years of multidisciplinary experience. Based on experience, skill set and software skills, I am proficient in: - Structure and Civil Engineering: Analysis and design of RC buildings and hydraulic structures, FEM/FEA, specifications, reports and detailing - Hydraulic Engineering: Analysis and design of storm sewers, detention ponds, intake weirs, open channels, water supply networks, sewerage networks, pipe flow, irrigation and distribution systems, and river systems as well as pre-and post-development 1D and 2D flood modelling. - Wastewater treatment: Analysis and design of on-site sanitation facilities, as well as treatment and disposal units. - Hydrology: Watershed modelling and water balance, flood frequency analysis, precipitation frequency analysis, watershed water accounting, SCS Unit Hydrograph, Rational method for peak events. - Land development: Grading and drainage designs, utility designs, erosion control planning, earthwork as well as alignment, profile and corridor design. - GIS: Watershed analysis, terrain analysis, geomorphic and meteorological data acquisition and processing for hydrological modelling, cartography and datasets processing and access through Python Software proficiency in: HEC-RAS, HEC-HMS, AutoCAD, Civil3D, ETABS, SAFE, EPANET, QGIS, ArcGIS, Excel, WaterGems, SewerGems, PVSyst,

Hydraulic Engineering
Hydrogeology
Hydraulic Simulation
GIS Software
Structural Engineering
ETABS
HEC-HMS
HEC-RAS
Hydrology
Wastewater Management
Civil Engineering
Building Design
$10 hourly
Malik F.
- 4.9/5
- (7 jobs)
I am a Professional Mechanical Engineer with 8 years of design experience. I specialise in Mechaical design related to 1. IC Engines 2. Power Hydraulics. 3. CAD, CAM, & FEM As a Mechanical Design Engineer with a strong background in Finite Element Analysis, CAD modeling, and practical experience in hydraulics, I possess a comprehensive skill set that aligns perfectly with roles involving IC engines, hydraulics, and 3D modeling. In my current role at MEC Energy, I have honed my skills in designing complex components for drilling and oil & gas-related applications, adhering to stringent API specifications. Notably, my involvement in projects such as the design of a bridge using topology optimization showcases my ability to apply innovative techniques to engineering challenges. Furthermore, my experience extends to conducting FEM analysis on structural components, including those subjected to combustion loads, demonstrating my proficiency in evaluating the performance and durability of mechanical systems. My expertise in hydraulics is evidenced by my successful design of a log splitter tractor extension, which required the integration of hydraulic cylinders operated by the tractor's compressor. This project not only demanded intricate knowledge of hydraulics but also showcased my ability to translate theoretical concepts into practical solutions through 3D modeling and simulation. Additionally, my involvement in the design of an opposed piston engine for lightweight motorcycles underscores my familiarity with IC engines. From numerical design to FEM analysis, I have demonstrated a deep understanding of engine dynamics and performance optimization. Overall, my diverse experiences in mechanical design, coupled with a passion for problem-solving and innovation, equip me with the necessary skills to excel in roles involving IC engines, hydraulics, and 3D modeling. I am eager to leverage my expertise to contribute effectively to projects and initiatives that drive technological advancement and innovation in these areas. I have started freelancing so that I can choose to work on projects I like and not get compelled to do something boring that I am not interested in. Some of the skills of 3D modeling, running simulations on Ansys, and other softwares come inherently.

Hydraulic Engineering
Finite Element Analysis
Mechanical Design
3D Printing
CAD
CREO
ANSYS
Mechanical Engineering
3D Design
3D Modeling
SolidWorks
$15 hourly
Ihtesham Ul H.
- 5.0/5
- (2 jobs)
Ihtesham ul Haq is a Registered Engineer with Pakistan Engineering Council and has a served 10- years in Hydrology, Hydraulic Engineering, structural Design and GIS Section I have Experience in following Projects •)-Dams •)-Roads •)-Railway Line •)-Canals •)-Building and Report Writing

Hydraulic Engineering
HEC-RAS
Structural Engineering
Structural Analysis & Design Software
Microsoft Word
HEC-HMS
Hydraulic Simulation
Bill of Quantity
Hydrology
GIS
ArcGIS
Civil Engineering
AutoCAD Civil 3D
Microsoft Excel
$10 hourly
Umer Ammar M.
- 5.0/5
- (1 job)
Experienced in all aspect of Structural & Hydraulic Engineering projects including Hydrology, Hydraulic Design, Structural Design, Supervision & Project Management for various Buildings, Residential units, Small Dams, Irrigation Networks, Small, Mini and Micro Hydropower units. A good team player with excellent communication skills who has the ability to perform under pressure while meeting deadlines. My technical experience includes but not limited to hydraulic, structural analysis using FEM software for 3D Modeling, Detailing/Detail Planning using latest design codes and standards including USACE, USBR, AISC, ACI & BS Standards.

Hydraulic Engineering
Hydrology
Structural Analysis
Hydropower
Autodesk AutoCAD
Microsoft Excel
Visual Basic for Applications
Excel Macros
Excel Formula
Civil Engineering
$10 hourly
Abrar B.
- 5.0/5
- (7 jobs)
Fire Sprinkler System Design Engineer. I am a professional fire sprinkler designer with extensive 8 years of experience in providing customized fire protection solutions for commercial and residential properties. I am specialize in designing efficient, code-compliant, and cost-effective fire sprinkler systems tailored to meet your specific needs. Whether you are planning a new construction project, undergoing a renovation, or need to upgrade your existing fire protection systems, I can help ensure that your property is equipped with the best possible fire safety solutions. Here are some key benefits of working with me. • Expert Design: Systems tailored to the building layout, fire risks, and local regulations. • Compliance Assurance: Adherence to the latest NFPA codes and local fire safety standards. • Cost-Effective Solutions: Optimized designs to reduce both upfront costs and long-term maintenance. Our work in designing innovative sprinkler systems to safeguard both commercial and residential spaces. With a robust background in mechanical engineering and a keen understanding of data operations, we're setting new standards in fire safety solutions. I have done lot of projects of fire sprinkler in all over the world ( USA,CANADA,UAE,KSA ) i am also member of AFSA (Chapter Florida, Los Angeles, San Francisco)-USA with John control and FM-Global certification. Thank You

Hydraulic Engineering
Load Calculation
Mechanical Design
Calculation
Autodesk AutoCAD
Design Thinking
Fire Protection Engineering
$10 hourly
Muhammad U.
- 4.4/5
- (9 jobs)
I am a Professional Chemical Engineer with 9 years of experience • 7 years as a Process Engineer in Engineering Consultancy • 2 Years as a Freelancer on Fiverr I have done Master's in Chemical engineering and Ph.D. in a project Management with 3.9 CGPA, My core expertise includes 1. Simulation of any Process plant on ASPEN HYSYS, Aspen Plus i.e Crude Distillation Units, Reactors, Aspen Flare, etc 2. Chemical Engineering Services 3. Hydraulic Calculations of Pipeline On PIPESIM, Korf 4. PFD, P&IDs Development on Autocad, Visio, 5. Content Writing 6. 3D drawings on Cadworx 7. Chemical Plant Design

Hydraulic Engineering
Microsoft Visio
Process Engineering
Chemical Engineering
Equipment Sizing
Process Design
Process Modeling
HTRI
Chemicals
Process Flow Diagram
Aspen HYSYS
PIPESIM
Aspen Plus
Process Simulation
Piping & Instrumentation Diagram
$20 hourly
Muhammad M.
- 4.8/5
- (4 jobs)
Right from BS, I have been working on various projects ranging from design, analysis, estimation, system dynamics modeling, sustainability, and much more. I have written various project reports, including progress reports done writing jobs during my bachelor's. My estimation and take-off skills are worth sharing as I am very efficient in PlanSwift and BlueBeam Revu for material takeoff and cost estimation. To date, I have worked on more than 350 projects that include but are not limited to commercial and residential buildings. I have also analyzed and designed various structures (buildings and bridges) through different commercial and student software (like GSA, SAP2000, ETABS, RISA, etc.) I have analyzed and designed foundations, slopes, and embankments through various software (like PLAXIS3D, GeoStudio, SLOPE/W, etc.). I have also helped multiple students in better solving their assignments, projects, and multiple tasks. I have also worked on the quantity and cost estimation of buildings and other infrastructure. Have some experience working on various projects of system dynamics and sustainability. In short, I am offering services for almost every task of civil engineering and system dynamics (through STELLA and Vensim). Don't hesitate to contact me; I would be more than happy to help you out.

Hydraulic Engineering
Estimator
Structural Drawing
Structural Dynamics
Reinforced Concrete Structures
Structural Analysis
Physics
Soil
Civil Engineering
Construction Estimating
Material Take-Off
Autodesk AutoCAD
GIS
Road Design
$20 hourly
Muhamad D.
- 0.0/5
- (1 job)
I am a qualified Civil Engineer with extensive experience in structural design, pavement design, foundation systems, and hydraulic engineering. Over the years, I’ve successfully contributed to a wide range of infrastructure projects, offering innovative and efficient engineering solutions from concept to completion. ✅ Core Competencies: Structural Design – Proficient in designing residential, commercial, and infrastructure structures using industry-standard codes and tools. Pavement Design – Skilled in flexible and rigid pavement systems for highways, urban roads, and industrial zones. Foundation Engineering – Expertise in shallow and deep foundation design, including pile, raft, and mat foundations. Hydraulic Engineering – Design and analysis of water supply, drainage, stormwater, and irrigation systems. Environmental Impact Assessment (EIA) – Experienced in evaluating environmental implications and preparing comprehensive EIA reports. 🛠 Software & Tools Proficiency: AutoCAD & Civil 3D – 2D/3D drafting, site grading, and road design. ETABS & SketchUp – Structural modeling, analysis, and visualization. Primavera P6 – Project planning and scheduling. Microsoft Excel – Advanced spreadsheet modeling, quantity take-offs, and data analysis. I take pride in delivering high-quality, detail-oriented work that meets client objectives and adheres to international engineering standards. Whether you need a full-scale design, consultation, or support on ongoing projects, I’m here to bring your vision to life. 📩 Let’s connect to discuss how I can add value to your project!

Hydraulic Engineering
Engineering Geology
Transportation Engineering
PlanSwift
Primavera P6
Microsoft Excel
Civil Engineering
ETABS
SketchUp
AutoCAD Civil 3D
3D Architectural Rendering
2D Drafting
Structural Engineering
Structural Detailing
Structural Analysis & Design Software
$10 hourly
Tanzeela Y.
- 0.0/5
- (0 jobs)
I'm a civil engineering with keen interest in designing and software modelling. Alongside my professional degree work, I have quite a passion in History, geography, philosophy and religions that motivates me to write interesting content including poetry. As a freelancer, I will input my maximum fruitful efforts to be of great value addition to your work surrounding civil engineering and content writing. I can help you with 1. Civil Engineering work 2. Geotechnical Design and Reports 3. AUTOCAD, RIVET, PLAXIS , SLIDE, PHASE software modelling 3. Complex MS Excel sheets formulation based on Looping 4. Content writing ( my rare passion for which I really want to work)

Hydraulic Engineering
Copywriting
Soil
Geology
Geography
Modeling
Structural Engineering
Civil Engineering
$30 hourly
Maghfoorullah T.
- 0.0/5
- (0 jobs)
As a civil engineer with advanced expertise in climate science, I specialize in developing **high-resolution gridded precipitation and temperature datasets** to support climate-resilient infrastructure and environmental modeling. My work focuses on: ✔ **Precision Climate Data Development** – Creating accurate, spatially interpolated datasets using advanced techniques like ** Gap filling in observed data, Validation, bias correction, and Trend analysis ** from sources such as **CRU TS, TerraClimate, and ERA5**. ✔ **Infrastructure Climate Risk Analysis** – Applying gridded climate data to assess flood risks, urban heat island effects, and drought impacts on civil engineering projects. With a strong foundation in **civil engineering principles** and **climate data science**, I bridge the gap between climate projections and real-world infrastructure solutions—helping governments, researchers, and NGOs build resilience against extreme weather. **Key Tools & Datasets:** Python (xarray, pandas), R, NetCDF, ArcGis, Google Earth Engine, CRU TS, WorldClim, ERA5, GPCC and many more

Hydraulic Engineering
Trend Analysis
Data Extraction
Hydrology
Primavera P6
Autodesk Revit
Autodesk AutoCAD
ArcGIS
Data Analysis
$10 hourly
Uzair M.
- 0.0/5
- (0 jobs)
SUMMARY Dynamic Mechanical Engineer specializing in power generation, utilities, and manufacturing optimization with a proven ability to drive operational excellence through innovative project leadership. Pioneering founder of Mechaneer Learning, revolutionizing engineering education by bridging the global industry-academia gap with practical, real-world training solutions.

Hydraulic Engineering
Piping Design
Lean Manufacturing
Root Cause Analysis
Thermodynamics
Machine Design
Maintenance Management
HVAC System Design
Mechanical Engineering
Energy
$25 hourly
Adnan M.
- 5.0/5
- (2 jobs)
I have expertise in the design of dams, with a particular area of interest is Earth core Rockfill, RCC and CFRD type of Dams. I have more than 13 years of professional experience in the design industry working on Preliminary, feasibility and detailed design study of water resources development projects. The following describes my expertise well. Preparation of Architectural plans, Elevation and Sections 3D modelling and rendering in SketchUp and Revit Landscaping Layout planning Site Investigations Geological Mapping and Field investigations for Dams and ancillary Structures Lab testings Slope Stability and Seepage Analysis Hydraulic design of Structures, Hydraulic Design of Mini /Micro Hydropower projects Quantity Surveying/Plan Swift, Bluebeam Design of tunnels and underground Works Design of Conveyance systems and cross drainage works Software Skills include: Autodesk AutoCad / 2D 3D Autodesk Revit SketchUp Global Mapper MS Office Rocscienc Slide HecRas Dips PlanSwift Bluebeam RS2

Hydraulic Engineering
HEC-HMS
Hydrology
Hydropower
Architectural Drawing
Bluebeam Revu
Structural Analysis
HEC-RAS
GIS
Geology
PlanSwift
Autodesk Revit
SketchUp
3D Modeling
Autodesk AutoCAD
$20 hourly
Muhammad A.
- 5.0/5
- (1 job)
I have years of experience in water resources engineering projects including storm water drainage design, site grading plans, watershed management, flood risk assessment, channel design, hydraulic structures design, 1D, 2D and flow 3D hydraulic and hydrologic modelling. I have quite good expertise in software's like Flow 3D, HEC-RAS, RAS Mapper, Hydrology Studio, HEC-HMS, Global Mapper, Arc GIS etc. I can provide services in the following areas: 1. 1D & 2D flow hydraulic Modelling 2. Stormwater Drainage Design 3. Steady and Unsteady flow Modelling 4. Flood risk assessment Model 5. Inline and Lateral Structures Hydraulic Model 6. Channel Design, Weirs, Bridges and Culverts Design 7. Projection and Terrain Modification in HEC-RAS 8. Flood Frequency Analysis 9. Rainfall Runoff Simulation Model using HEC-HMS 10. Watershed Delineation using Arc GIS 11. Water Surface area delineation from satellite images

Hydraulic Engineering
Civil Engineering
Flow Simulation
Storm Water Management Model
Hydraulic Simulation
HEC-RAS
HEC-HMS
Hydrology
ArcGIS
$20 hourly
Shahid R.
- 4.1/5
- (1 job)
I have always been passionate about the hydraulic design of utilities and that's why I have chosen to study Environmental Engineering at the university of engineering and technology Lahore. While still being at university I got my first job as a junior design engineer at Enviro Consult based in the same city. After 2 years of experience, I was promoted to the team lead. Right now, I have a total of 15 years work experience. Currently, I am looking for more remote opportunities as I love working with clients from home. I can do Water Supply Design, Water Treatment Plant Design, Wastewater Collection and Disposal Design, Wastewater Treatment Plant Design, Stormwater Management Plans, Drainage and Grading Design, Erosion and Sedimentation Control Plan, Environmental and Social Impact Assessment, CAD Drafting etc.

Hydraulic Engineering
Wastewater Management
Environmental Science
Social Impact Assessment
GIS
Civil Engineering
Environmental Design
AutoCAD Civil 3D
CAD Drafting
$11 hourly
Muhammad S.
- 0.0/5
- (0 jobs)
I am Civil engineer with almost one year experience and i have done paln and estimate many projects in my city as well as in Fiverr. So you would be pleased to work with me. i will work hard to meet all your expectation and work untill your complete satisfaction.

Hydraulic Engineering
Research Paper Writing
Gantt Chart
Microsoft Excel
Hydrology
Structural Analysis
Cost Estimate
Time & Cost Estimate
Civil Law
PlanSwift
Primavera P6
Project Management
Civil Engineering
$25 hourly
Muhammad W.
- 2.2/5
- (1 job)
Expert Fire Sprinkler System Designer | NFPA Compliant | AutoCAD & Elite Fire Sprinkler Hi, I specialize in Fire Sprinkler System Design with 7 years of experience delivering NFPA-compliant, cost-effective, and reliable fire protection solutions for residential, commercial, and industrial buildings. Whether you need a new design, as-built drawings, hydraulic calculations, or Tenant Improvements, I can help you from concept to submission. My Services Include: • Detailed Fire Sprinkler Layouts • NFPA Code Compliance (NFPA 13, 13R & 13D) • Hydraulic Calculations (Elite Fire Sprinkler Software) • AutoCAD Drafting and Redline Corrections • Submittal and Permit Package Preparation I’m highly detail-oriented, efficient, and always focused on code compliance and constructability. Let’s connect to discuss your project requirements and how I can help deliver high-quality results on time. Looking forward to working with you! Best regards, Waleed Iqbal Mechanical Engineer | Fire Sprinkler System Designer

Hydraulic Engineering
Home Design
Sprinklr
Mechanical Engineering
Mechanical Design
Technical Support
2D Design
AutoCAD Civil 3D
Fire Protection Engineering
Piping Design
Printable 3D Models
Sketch
SolidWorks
3D Modeling
Autodesk AutoCAD
$5 hourly
Salah U.
- 0.0/5
- (0 jobs)
I am a skilled Water Resources Engineer with expertise in hydrology, hydraulic structure design, and hydropower projects. I have hands-on experience with HEC-RAS, BoQ preparation, quality control planning, and construction project management. Proficient in Primavera and MS Project for scheduling with earned value management, and skilled in Power BI for insightful data reporting and visualization.

Hydraulic Engineering
CAD Drafting
Construction Estimating
Water Distribution Modelling Software
Hydropower
Microsoft Project
Water Resources Engineering
Hydrology
Microsoft Power BI
Project Schedule & Milestones
Structural Engineering
GIS Software
AutoCAD Civil 3D
HEC-RAS
Primavera P6
Want to browse more freelancers?
Sign up