Hire the Best PCB Designers
in the United States

I’m a PCB design | Reverse PCB Design Engineer specializing in reconstructing, analyzing, and improving existing circuit boards when original documentation is missing or incomplete. Over the past 10+ years, I’ve reverse-engineered dozens of commercial products ranging from consumer electronics to industrial controllers helping clients recreate legacy hardware, correct design flaws, and prepare boards for manufacturing. Work History & Experience •Rebuilt complete schematic and PCB files from physical boards for multiple clients in the U.S. and Europe •Successfully reverse-engineered 4-layer and 6-layer RF boards, including WiFi, Bluetooth, and GPS modules •Restored obsolete industrial control boards where BOM and Gerbers were no longer available •Converted entire product families from old proprietary boards into modern Altium or KiCad designs •Helped several startups recover and redesign hardware after losing original engineering teams •Reverse-designed battery-powered IoT devices, optimizing power paths, charging circuits, and safety features •Translated raw PCB scans and photos into fully manufacturable Gerber and ODB++ files •Conducted board validation, corrected routing issues, and improved manufacturability for mass production •Supported clients in factory communication, DFM review, stack-up selection, and production testing Core Skills •PCB reverse engineering (from 1-layer to 8-layer boards) •Schematic reconstruction from physical PCB •Net tracing, component identification, and footprint rebuilding •Recreating BOM with equivalent components •Altium, KiCad, Eagle, OrCAD •High-speed and RF routing reconstruction •Power supply and charger circuit analysis •Legacy hardware modernization •EMC/ESD improvement and reliability upgrades •Gerber recreation for manufacturing What I Can Deliver •Complete schematic + PCB files from any board •Clean, readable, and logically organized circuits •Rebuilt BOM with part numbers and sourcing links •Improved design ready for prototyping or mass production •DXF/STEP data for enclosure designers •Manufacturing package (Gerber, drill, pick-and-place, PDF docs) Why Clients Choose Me •Hands-on experience with 100+ boards across multiple industries •Ability to reverse-engineer boards without original documents •Fast, precise reconstruction—even for dense multilayer layouts •Professional communication and clear reporting •A strong record supporting real production builds

Thank you for taking the time to view my profile! I am an electrical engineer with experience in PCB hardware design, embedded systems programming, and software application development. I specialize in full-stack electronics design for IoT systems, covering cloud integration, BLE, and RF wireless communication. My background includes digital signal processing (DSP), electromagnetic simulation, and machine learning for data classification, image recognition, and audio processing. I’ve also built strong skills in application development, database integration, and 3D modeling for enclosure design. I founded Future Technologies Laboratory LLC in 2015 with the goal of providing complete electronics and software engineering solutions. Today, I lead a talented team of engineers to fulfill the requirements of complex projects and ensure they move efficiently from concept to production. Services: •Circuit Design & PCB Layout – KiCad, EasyEDA, DipTrace, Altium Designer (limited license) •Embedded Systems Programming – ESP32, STM32, Microchip, nRF52, Arduino, Xilinx, SHARC •AWS Cloud Services – S3, IoT Core, IAM, Amplify, DynamoDB, etc. •Simulation, DSP & Machine Learning – Python, MATLAB, LabVIEW •Application & Web Development – React Native, React, Flutter, .NET •3D Modeling & Enclosure Design – Autodesk Fusion 360, including IP-rated housings •Project Management & Technical Documentation – concept development, planning, and technical writing

Hi, I'm an Embedded Engineer specializing in PCB design, multilayer PCB layout, schematic capture, PCB reverse engineering, HDI boards, RF/mixed-signal PCBs, and manufacturing-ready PCB development. Proficient with Altium, KiCAD, Eagle, and Allegro. Skilled in signal integrity, power electronics, BOM optimization, DFM/DFT, test fixtures, and IoT/embedded hardware. I deliver reliable, high-density, low-power PCBs with thorough documentation for smooth production and testing. 🔧 Hardware & PCB Design -Altium Designer, KiCad, Eagle, OrCAD/Allegro -Schematic Design & Multilayer PCB Layout (2–12+ layers) -High-Speed Design (DDR, USB, Ethernet) -RF & Antenna Basics (WiFi, BLE, GPS) -Power Electronics & Power Integrity -Signal Integrity & EMC/EMI Optimization -DFM / DFA / DFT (Manufacturing & Testing) -BOM Optimization & Component Selection ⚙️ Embedded Systems & Firmware -ESP32 (ESP-IDF), STM32 (HAL/LL), Nordic (nRF52) -ARM Cortex-M, AVR, PIC Microcontrollers -C / C++ Embedded Programming 📡 IoT & Connectivity -WiFi, BLE, LoRa, Zigbee -MQTT, HTTP/HTTPS, TCP/IP -AWS IoT, Azure IoT 💡 Sensors & Peripherals -Motion Sensors (PIR, mmWave) -ADC/DAC, I2C, SPI, UART, CAN -Displays (LCD, OLED, ePaper) -LED Drivers & Lighting Systems 🧪 Prototyping & Testing -Oscilloscope, Logic Analyzer, Multimeter -Hardware Debugging & Bring-up -Rapid Prototyping & Iteration -Soldering (SMD/THT) 🛠️ Mechanical & Integration -Enclosure Design (basic CAD: SolidWorks) -Thermal Considerations -Product Prototyping (EVT/DVT stages) Thanks for reading my profile!

Running a temporary lower billing rate as I launch on this platform. Hi, I’m am an American U.S. based medical device engineer with 15+ years of experience designing, testing, and validating PCB-level electronics for medical, industrial, military, and R&D applications. I specialize in EagleCAD/Fusion360 (primary) and Altium-compatible designs, and have hands-on experience with micro-soldering and bench-level troubleshooting and repair (facilities can be arranged for the right project). If you need help turning a schematic into a manufacturable board, debugging an existing design, or setting up automated testing for your hardware, I can support you from system concept through prototype, verification, and market release. Transparent communication and regulatory-grade documentation come standard—you’ll always know what’s been done, what’s next, and why it matters. Let’s get your design validated and ready to build.

In the industry for many years, I am an expert in Electronics Design, Manufacturing and PCB Layout. Credentials include an AS in Electronics, one patent and an IPC CID+ (Advanced Certified Interface Designer). My experience helps bring a high level of competence to your project or design review. I am available for work in any time zone.

# Altium Designer # Work on complex designs with FPGAs (>1000 pins), CPUs, DDR2/3/4, Ethernet Switches. # Most designs have USB, SATA, RGMII, SGMII, 1G/10G Eth, PCIe. # Controlled impedance/length matching, via back-drilling, blind/buried vias, HDI. # Designs range from small (<100 comps) to large systems (multiple PCB >2500 comps each). # Worked on Automotive, Mil-spec, Space, High Power (> 50A, > 500V), Audio, Mixed A/D, & RF. Services provided: # PCB Layout -- High Speed, Mixed A/D, RF, Audio, High Power, Telecom, Test, Mil-spec. # Schematic Capture -- Hierarchical or Flat, BOM selection, Sim/Signal Integrity. # Library Management -- Schematic symbol, PCB footprint, integrated 3D info in footprints. # Electronic Design -- High Speed, A/D, Audio, Mixed. # Electronic Design starting from the ground up to the end.