Hire the Best Serial Port Interfacing Specialists
in Pakistan

Senior Embedded Linux Engineer | Linux Kernel | Yocto | BSP | Device Drivers | Embedded C/C++ I'm a Senior Embedded Linux Engineer with 5+ years of experience developing production-ready embedded systems for ARM-based platforms. My expertise includes Linux Kernel customization, BSP development, Yocto, U-Boot, Device Tree (DTS/DTB), Linux Device Drivers, Embedded C/C++, and Embedded Linux optimization. I have hands-on experience with NVIDIA Jetson (Orin NX/Nano), Rockchip RK3566/RK3568, Raspberry Pi, NXP i.MX6, Xilinx Zynq UltraScale+, QorIQ T1042, STM32, and ESP32. I specialize in board bring-up, kernel porting, bootloader customization, peripheral integration, fast boot optimization, and hardware debugging. Core Skills: Embedded Linux Linux Kernel Development BSP Development & Board Bring-Up Yocto Project & BitBake PetaLinux U-Boot Device Tree (DTS/DTBO) Linux Device Drivers (I2C, SPI, UART, GPIO, PCIe, USB) Embedded C/C++ Cross Compilation CMake & Make Boot Optimization ALSA, PulseAudio, PipeWire I help companies build reliable, high-performance embedded Linux systems—from custom hardware bring-up to production deployment—with clean, maintainable, and optimized code.

I design embedded electronic products from schematic and PCB layout through firmware, bring-up and testing. If you're building an ESP32/STM32 device, sensor platform, BLE/IoT product or custom PCB, I can help turn the idea into working hardware. I work across both hardware and firmware, which means you don't need separate engineers to diagnose whether a problem is coming from the PCB, power system, sensor interface, communication protocol or embedded code. My experience includes: • ESP32 / ESP32-S3 and STM32 development • Embedded C/C++ firmware • Schematic capture and PCB layout • Altium Designer, KiCad, EasyEDA Pro and Cadence • BLE, Wi-Fi, LoRa, SPI, I²C, UART and other peripheral interfaces • Sensor and biosensor integration • Mixed-signal and low-noise electronics • Power supply and battery-powered electronics • PCB bring-up, debugging and design reviews • BOM, Gerber, Pick-and-Place and manufacturing documentation • Python, MATLAB and LabVIEW test/visualization tools I've worked on connected-health devices, environmental sensing systems, wearable electronics, test-and-measurement systems and embedded product prototypes. What I can help you with: → Custom embedded hardware design → ESP32/STM32 firmware development → PCB schematic/layout and design review → Sensor/BLE/IoT integration → Hardware debugging and board bring-up → Prototype-to-manufacturing preparation I focus on designing systems that don't merely work in simulation—they can be built, tested and iterated on real hardware.

50+ hardware and embedded systems projects delivered, from concept through manufacturing. Full project lifecycle ownership: requirements → schematic → PCB layout → firmware → prototyping → testing → DFM/production handoff. Projects spanning industrial electronics, IoT devices, RF systems, wearables, and battery-powered products. I design and build hardware products that survive real-world contact — not just designs that work in simulation. For 6+ years, I've taken products from a blank schematic to manufactured, field-deployed hardware: industrial electronics, IoT devices, RF systems, and embedded platforms used in real industrial and consumer environments. I work across the full stack — system architecture, PCB layout, firmware, prototyping, and DFM — so you get one engineer who understands how a firmware design decision affects the PCB, and vice versa. If you need someone who can own a hardware product end-to-end, or step into a specific phase (schematic review, firmware bring-up, RF tuning, manufacturing prep), I can help. WHERE I ADD THE MOST VALUE Custom PCB design, 2–12 layers, including high-speed digital and RF layouts EMI/EMC-aware design and Design for Manufacturing (DFM) Embedded firmware in C/C++ for ESP32, STM32, nRF52/nRF53, RP2040, and ARM Cortex-M platforms IoT connectivity: Wi-Fi, BLE, LoRa, GSM/LTE, GPS/GNSS, cloud-connected devices Industrial communication: UART, SPI, I²C, RS485, Modbus, CAN Bus Power electronics: battery management systems (BMS), DC-DC converters, SOC/SOH estimation, industrial power monitoring Prototype-to-production support, including BOM creation and manufacturing handoff RECENT WORK Industrial gas metering system (EVC V5) — redesigned the hardware architecture with RS485, CAN Bus, and Modbus communication, built to meet EMI/ESD protection and hazardous-environment requirements. Ground Penetrating Radar — designed a 100–900 MHz subsurface sensing system built around a high-efficiency Class-E RF power amplifier and custom embedded electronics. EEG smart glasses — developed wearable electronics for brainwave acquisition, signal conditioning, embedded processing, and wireless transmission. Dual-MCU wireless audio platform — low-power architecture combining nRF5340 and ESP32-S3, with BLE, Wi-Fi, secure storage, and advanced power management. Energy monitoring & battery management platform — multi-source monitoring across AC power, solar generation, and battery storage, with SOC/SOH estimation, GSM connectivity, Ethernet, and remote monitoring. High-power RF amplifier — 100 MHz Class-E design delivering up to 1 kW output. Multiple ESP32-based industrial and consumer products — automation, environmental monitoring, sensing, and data acquisition. Aero-Guide robot — autonomous, AI-assisted navigation platform, finalist in a national engineering competition. WHAT YOU GET WORKING WITH ME Clear technical communication from day one — I'll tell you early if something won't scale, won't pass EMC, or won't be manufacturable, rather than letting you find out after fabrication. Deliverables built for handoff: schematics, PCB layouts, Gerbers, BOMs, manufacturing files, firmware, and documentation — organized so another engineer (or your future self) can pick them up. Fast, practical problem-solving when prototypes don't behave as expected. A focus on shipping reliable, buildable hardware — not just a working bench demo. Outside of engineering, I spend time mountain trekking, with expeditions to several major peaks in Pakistan, including base camps of multiple 8,000m mountains. It's where I keep my planning and problem-solving instincts sharp under pressure — skills that translate directly into debugging hardware at 2 am before a deadline. If you have a hardware or firmware challenge — from a rough concept to a stalled prototype that needs fixing — I'd be glad to take a look and tell you honestly what it'll take to get it done right.

Top Rated Plus Embedded Hardware & Firmware Engineer with 15+ years of experience building reliable embedded products, IoT systems, and production-ready electronics. I help startups, product teams, and manufacturers take an idea, prototype, or broken design and turn it into a working embedded product that can be tested, manufactured, and scaled. My work connects hardware, firmware, and real-world product execution. Instead of treating the circuit, code, sensors, connectivity, power system, enclosure, and manufacturing process as separate pieces, I help bring them together into one reliable product. WHAT I BUILD • Custom schematic and PCB design for reliable embedded hardware • Embedded firmware development in C/C++ for real-world products • ESP32, STM32, Nordic, Arduino, Raspberry Pi, and Embedded Linux platforms • BLE, Wi-Fi, LTE, Cat-M1, NB-IoT, LoRa, NFC, GPS/GNSS, and sensor integration • Low-power electronics, battery-powered devices, BMS, and power management • Industrial interfaces including UART, SPI, I2C, RS-485, CAN, Modbus, ADC/DAC, and GPIO • Board bring-up, debugging, firmware validation, and hardware troubleshooting • BOM preparation, Gerber files, assembly files, DFM review, and manufacturing support I have worked across wireless IoT devices, wearable and medical electronics, industrial monitoring systems, automation hardware, smart sensors, connected consumer products, and custom embedded controllers. WHY ONE TECHNICAL OWNER Clients usually come to me when they need more than a schematic or a firmware file. They need someone who can understand the complete system, identify risks early, solve hardware and firmware integration issues, and move the product closer to production. I also lead a full-service engineering team when projects require additional support across mechanical enclosure design, cloud integration, mobile app development, product design, or manufacturing coordination. This gives clients one technical owner while keeping the embedded hardware and firmware work technically grounded. READY TO BUILD? Send me your requirements, target platform, connectivity needs, power constraints, current design files, and production volume. I’ll respond with a clear technical scope within 24 hours. Warm Regards, Huzaifa Ali

What I Can Help You With ⚡Component Selection & Sourcing MCU/SoC, FPGA, PMIC, RF, GPS, sensors, passives with calculations. Cross-ref, cost optimization, LCSC/DigiKey/Mouser sourcing, EOL/NRND mitigation. 🔋Power Design LDO, buck/boost, Li-ion/LiPo, PMICs, protection (OVP/OCP/UVP), thermal, sequencing. 📡RF, GPS , Wireless & UWB BLE, WiFi, Zigbee, LoRa, NFC, LTE/5G, GSM, GNSS, antenna & RF layout, SIM interfaces. 🔌High-Speed & Mixed Signal USB, Ethernet, LVDS, SPI/I2C/UART/CAN/RS485, ADC/DAC, SI/impedance. 📐 Schematic & PCB Decoupling, protection, stack-up, EMI/EMC, routing, DFM. 🔒 MCU/FPGA & Bio-Signal Integration STM32, ESP32, nRF52, RP2040, i.MX RT, ATSAMD21, XC7A50T-FTG256, XC6SLX45-FG484, ADS1299IPAG, SX1276, SIM7600,SIM7080G, BG95M1LA64S, GNS NEO-M8N — pin mapping, boot, clocks, OTA/security. 📊 Sensors & Analysis IMU, pressure, temp, gas, bio-sensing; power, filters, battery life. 🏭 Production Ready BOM, Gerbers, CPL, bring-up. ✍️ Docs & Proposals **7+ years delivering production-grade hardware with real engineering depth.**

Top Rated Freelancer | 95% Job Success | 6+ Years of Experience | 50+ Projects Delivered I help startups, product companies, and businesses transform innovative ideas into reliable, production-ready embedded products. From custom PCB design and embedded firmware to AI-powered devices and IoT solutions, I provide end to end engineering support throughout the complete product development lifecycle. Whether you're building an MVP, improving an existing product, or preparing for manufacturing, my focus is on delivering practical, scalable, and high quality engineering solutions. Over the past 6+ years, I've successfully delivered 50+ projects for clients across industrial automation, medical electronics, automotive systems, IoT, AI powered embedded devices, and secure software applications. My approach combines hardware, firmware, AI, and system architecture to build complete solutions, not just individual components. Core Expertise: Embedded Systems Embedded Firmware Development ESP32, STM32, nRF52, AVR & PIC Raspberry Pi Development Hardware Bring-up, Debugging & Testing PCB Design Custom PCB Design Schematic Capture PCB Layout Altium Designer KiCad Manufacturing-Ready PCB Design AI & Computer Vision Edge AI Integration OpenCV YOLO TensorFlow Lite AI-Powered Embedded Applications IoT & Connectivity Wi-Fi BLE LoRa LTE MQTT Sensor Integration Advanced Engineering System Architecture Runtime Validation Secure Software Design Application Integrity Product Optimization Technologies Programming: C, C++, Python Microcontrollers: ESP32, STM32, nRF52, AVR, PIC, Raspberry Pi PCB Design: Altium Designer, KiCad Communication: UART, SPI, I²C, CAN, BLE, Wi-Fi, LoRa, LTE, MQTT AI & Computer Vision: OpenCV, YOLO, TensorFlow Lite What You Can Expect: Endto end product development, from concept to production Reliable, manufacturing ready PCB designs Clean, scalable, and maintainable firmware Strong analytical thinking and practical problem solving Clear communication and transparent project updates Long term engineering support For projects requiring backend development, cloud integration, DevOps, mobile applications, or web dashboards, I collaborate with experienced specialists to deliver complete end to end solutions while remaining your primary engineering point of contact. I believe successful products are built through thoughtful engineering, attention to detail, and close collaboration with clients. My goal is not just to complete a project, but to deliver a solution that is reliable, manufacturable, and built to perform in real world environments. If you're looking for an engineer who can design hardware, develop firmware, integrate AI, and build complete embedded products, I'd be happy to discuss your project and help bring your idea to life.