Hire the Best Aurigo Masterworks Specialists

Hi there, I am a Civil Engineer by profession and have experience of more than 12 years in overseeing the Construction Project quantities takeoffs and cost estimation, tendering, designing and drafting 2D/3D, Planning, Scheduling and management of construction projects from start to finish. I specialize in managing complex projects, ensuring they are delivered on time, within budget, and meet the highest quality standards. I would be excited to collaborate with you to bring your vision to life. Engaged in field structural assessment / construction supervision / construction estimation / project designing / project planning, scheduling and execution / project controlling and tracking of projects. Your Requirements: For 2D or 3D and shop drawings, I am using Civil 3D or Revit or Sketch-up or Auto-CAD softwares. For 2D or 3D millworks drawings , I use Cabinet Vision or Auto-CAD software. I’m also expert in Construction projects planning and scheduling, Estimation, Budgeting and architectural construction drawings. For Projects Planning, I use Primavera-P6 and MS Project software. Being a Planning Engineer, I have complete command on all software's & experience as a Planning Engineer for Canada, Australia, and the United Kingdom. Being an Engineer, I have complete command on all software's and experience for Canada, Australia, and the United Kingdom projects. For takeoff, I am using Bluebeam-Revu or Planswift software. Being a construction estimator, I have complete command of all CSI divisions/trades and also have experience as a quantity surveyor for Canada, Australia, and the United Kingdom. I am providing takeoff for all trades like: -Div-01: General Conditions -Div-02: Existing Conditions -Div-03: Concrete -Div-04: Masonry -Div-05: Metals -Div-06: Lumber, Carpentry, Millwork -Div-07: Roofing, Moisture Protection, Thermal Proofing -Div-08: Openings -Div-09: Finishes -Div-10: Specialities -Div-11: Equipments -Div-12: Furnishings -Div-14: Conveying Equipment -Div-21: Fire Protection -Div-22: Plumbing -Div-23: HVAC -Div-26: Electrical -Div-27: Communication -Div-28: Fire Alarm -Div-31: Earthwork -Div-32: Exterior Improvements -Div-33: Utilities I have completed more than 1000+ commercial and residential projects all over the world including the United States, the United Kingdom, Canada, and Australia. I have also done some projects for Saudi Arabian, Kuwait, and UAE clients. Hopefully, you will get a detailed work from my side. Good or bad I want to listen from your side that what you think about this opportunity. Please feel free to schedule a call at your convenience or respond here with any questions you may have. I am always available to have a chat or zoom call with you at any time when you will be available. I’d love the opportunity to discuss your project in more detail and explore how I can assist in ensuring its successful completion. Thank you for considering my proposal. I look forward to the possibility of working together. Best regards, Engr. Taimur Ahmed

"Karen was a rock star for performance. Highly recommend." "Great to work with. Amazing time management and skills." "AMAZINGGGG WORK!!" "Karen was amazing. Great work and communication. Would recommend to anyone.." "Karen was great! Very attentive and effective." "Thanks for your hard work! Job well done!" "karen was a great helper and did her job very well. we would have her keep working for us if not for a slow down on our side. definitely recommend!" The above testimonials were taken directly from my customer feedback as a proof that I am aiming for accomplishment and customer satisfaction. My client's satisfaction is my top priority. I want to be the best provider for my clients. Over 15 years experience as AutoCAD operator been part of ENG Dubai PH site (http://engworldwide(dot)com), almost 3 years experience in Telecom/Fiber Permitting-CAD Outside Plant, Civil Permitting, Subsurface Utility Permitting Communication Network Design, Right-of-Way Permitting (https://idgllc(dot)net) and some of Construction Companies here in PH. I do have experience with Amazon SellerCentral, eBay, Etsy, Bigcommerce, Bonanza and Lead Generation. Also I can do posting Ads on Craigslist (CL), Backpage, olx and kijiji. Data mining, Researching, Data entry (Excel or Google docs) also my expertise. My Goal are: * To provide a high quality service within my expertise. * To have a great, long term working relationship with Upwork employers. * To grow personally and professionally. * To excel in all facet of my chosen expertise. Why would you hire me? * I will never let you feel that I am wasting your time or money. * I will always meet your requirements 100%. * I am an organized and a fast worker, and always maintain schedules to meet deadlines. * I am responsible, highly resourceful, detail-oriented, reliable, goal-oriented, relentless, self-motivated, open-minded, and willing to learn. Thanks!

Architectural Designer with 7+ years of experience in residential and commercial projects, specializing in BIM modeling, construction drawings, architectural drafting, and 3D visualization. I help clients transform ideas into functional, buildable, and visually compelling spaces through accurate technical documentation and efficient architectural solutions. My services include: • Architectural Design • Revit BIM Modeling • AutoCAD Drafting • Construction Drawings • Floor Plans & Technical Documentation • 3D Modeling & Visualization • Residential & Commercial Design • PDF to AutoCAD (DWG) Conversion • Scanned Drawing to CAD Redraw • Hand Sketch to AutoCAD • 2D Floor Plan Drafting I focus on delivering clean, coordinated, and construction-ready designs that combine functionality, aesthetics, and technical precision. Currently working as a Project Architect, I have experience coordinating architectural projects while ensuring compliance with engineering and construction standards.

Hi my name is Paden and I own Silverado Design LLC, I am located in Lafayette, Colorado. I have over 20 years of experience in all aspects of architecture and construction for residential and commercial projects. I have worked from the programing stage through construction administration in Revit, AutoCAD, SketchUp, ArchiCAD, and Chief Architect. Below is the full list of services I provide: -Residential remodels, additions, interior updates -Residential custom: 2k-10k SF -Residential duplex and triplex -Residential townhomes and multifamily -Commercial: business, retail, mixed use, tenant improvement -Programming -Schematic Designs -Design Development -Construction Documents -Construction Administration -Residential permit sets -Electrical layouts -IRC and IBC code analysis -3D perspectives and renderings -Construction detailing -Architectural site plans -BIM modeling: architectural, structural, electrical, mechanical -Coordination between other design teams -Revit customizations, family creations, and tutoring -Software: Revit, AutoCAD, SketchUp, Navisworks, Bluebeam, Microsoft Office, Revizto, Lumion I have completed jobs in the following state: Arizona, California, Colorado, Florida, Hawaii, Idaho, Mississippi, Montana, Nevada, New Mexico, New York, New York, North Carolina, Oklahoma, Pennsylvania, Texas, Utah, Vermont, and Virginia. I highly believe that architects should have construction experience and vice versa. Having spent many years in both realms, I bring a unique ability to know what each side is looking for and mitigate the frustration that so often occurs between the two sides. When I work on a project, I am continually looking at it with the contractor's and architect's view in mind so it ultimately leads to a smooth and refined project that reduces costs and errors. I place a lot of value on constant and clear communication, so I create a list of questions with imagery for clarification and review with the team. I am always open to feedback, if there is something I can do to make your life easier or make the project run smoother, please don't hesitate to share! I appreciate you taking the time to check out my profile! Please reach out if you have any questions or if I can provide any additional information. Thank you, Paden

Every detailing error costs you twice: once in the shop, again on site. My job is to make sure you never pay either bill. I'm a Structural Engineer and Tekla Steel Detailer with 5+ years and 200+ completed projects across the USA, Australia . Fabricators and contractors hire me when drawings need to be right the first time — every bolt, plate, weld, and cleat modeled to fabrication tolerances and fully compliant with AISC, AS/NZS, standards. WHAT I DELIVER • Steel detailing and 3D modeling in Tekla Structures • Shop, assembly, and single-part drawings (DXF, DWG, PDF — CNC-ready) • Erection drawings and steel connection design (bolted & welded) • Material take-offs (MTO) and bill of materials (BOM) • Clash detection and BIM coordination • Revit to Tekla conversion (full BIM integration) I handle everything from stair, handrail, and mezzanine packages to complete warehouse and multi-storey structural steel frames — residential, commercial, and industrial. WHY FABRICATORS REHIRE ME • 100% Job Success Score, consistent 5-star feedback • I think like a fabricator, not just a modeler — workflows, tolerances, and erection sequence are built into every drawing • Tight deadlines met without chasing, with clear daily communication "I have now worked with Abdullah three times on AU residential-based steel detailing projects... he consistently delivers within tight timelines." — Repeat AU client READY TO START? Send your design drawings (PDF, DWG, or Revit/IFC) and within a few hours you'll have a clear scope, timeline, and fixed quote. No surprises — on price or on site.

Need permit-ready drawings, coordinated Revit models, and construction documentation that actually gets approved? That’s where I come in. I’m an Architectural Drafter and BIM Modeler with hands-on experience delivering construction-ready documentation across all project phases, from early design to full Construction Documents and As-Builts. I don’t just model, I think like a builder, coordinate like a consultant, and document like it’s going straight to permit. Core Expertise - Revit Modeling with real project intent - Construction Documents (CDs) aligned with U.S. standards - Shop Drawings & As-Built documentation - Architectural coordination with structural & MEP systems - Residential & commercial projects (U.S.-based) - Strong working knowledge of Florida Building Code (FBC) What Sets Me Apart - Permit-focused mindset — drawings built for approval, not just presentation - Clarity in documentation — clean sheets, coordinated details, fewer RFIs - Reliable delivery — deadlines are respected, communication is direct - Problem-solving approach — I don’t wait for issues, I anticipate them Time is money in construction. Delays cost more than drawings ever will. I make sure your documentation moves the project forward not backwards. If you’re looking for someone who understands both design intent and construction reality, let’s talk.