Hire the best BIM Specialists in the Philippines

Check out BIM Specialists in the Philippines with the skills you need for your next job.
  • $45 hourly
    L – Let there be light, through I – Impeccable lighting design, w/ over 9years of expertise G – Given technical knowledge in lighting fixtures and supplier H – Have a wide range of project portfolio in different sizes and complexity T – Thus providing the client a Total Lighting Solution Experience. Contact me, I'll share some light with your project. Standards: Lighting Design Peer Review - Australian Standards Lighting Design Peer Review - US Standards Lighting Design Peer Review - European Standards Software: Dialux Evo 11 Dialux 4.13 AGi32 20.9 Relux LDT Editor ESA Pro (DMX Lighting Control) HDL Bus Pro (Automation and Control) AutoCAD 2022 Revit 2012 Sketchup 2012 Adobe Photoshop 2022
    vsuc_fltilesrefresh_TrophyIcon BIM
    Bluebeam Revu
    Building Information Modeling
    DIALux evo
    Load Calculation
    Adobe Lightroom
    2D Design & Drawings
    Electrical Design
    Lighting Design
    CAD Drafting
    3D Modeling
    Autodesk AutoCAD
    Autodesk Revit
    SketchUp
  • $20 hourly
    Greetings! My name is Maricel, and I have a Diploma in Drafting/CAD Technology. I also completed a BIM Course in Revit Software, including Revit Architectural, Structural, MEPF (Mechanical, Electrical, Plumbing, and FirePro), and Navisworks. I have over four years of experience in BIM, modeling, and leading the Architectural, Structural, and MEPF disciplines for projects in the UK, Australia, and the US. I am experienced to use the following Software/Tools: ●FOR BIM - Revit - Autocad - BIM360 - Navisworks - Pointcloud/ Recap - Bluebeam - Revizto ●OTHERS - Project Management - Microsoft Excel - Microsoft Word Type of work I am confident I can fully deliver accurately on time: - Revit modeling - Revit Family Creation - Revit Project Setup - Drawing production(PDF & DWG file) - Navisworks Clash Detection - Exporting Clash Report - BIM Coordination
    vsuc_fltilesrefresh_TrophyIcon BIM
    Building Information Modeling
    Drafting
    Mechanical Engineering
    BIM Family Creation
    Point Cloud to BIM
    Autodesk Navisworks
    Autodesk BIM 360
    Autodesk AutoCAD
    CAD
    Autodesk Revit
    2D Design
    3D Modeling
    Microsoft Office
  • $13 hourly
    Freelance ARCHITECTURAL CAD DESIGNER specializing in 3D modeling, Rendering, and Drafting. Currently working as a remote drafter for designers since 2018. Always open to new work at short notice. My experience allows me to work with anyone from anywhere. SKILLS: ✅ Drafting ✅ Rendering ✅ 3D modeling ✅ Shadow Study ✅ Architectural plans ✅ Video walkthrough ✅ Photo editing SOFTWARE: 🛠️ Vectorworks 🛠️ Revit 🛠️ AutoCAD 🛠️ SketchUp 🛠️ Photoshop 🛠️ Lumion
    vsuc_fltilesrefresh_TrophyIcon BIM
    2D Design & Drawings
    Building Information Modeling
    Photo Editing
    Google Sheets
    Architectural Rendering
    3D Rendering
    3D Design
    Adobe Photoshop
    VectorWorks
    Autodesk Revit
    SketchUp
    Autodesk AutoCAD
    Lumion
  • $15 hourly
    I am an architecture graduate capable of formulating designs, ideas and solutions; what comes along with it is vast experience in applications such as: Sketchup, V-ray, Enscape, AutoCAD, Lumion, and Revit. I also use Adobe Photoshop and had learned various creative video editing techniques that had helped me in developing my work. I always give the best with my work, even with time constraints I make sure to pay attention to details. So if you're looking for efficiency, I am the right person.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Building Information Modeling
    Concept Design
    Lumion
    Interior Design
    V-Ray
    Architectural Rendering
    Video Editing
    Drawing
    CAD
    Autodesk Revit
    SketchUp
    Autodesk AutoCAD
    2D Design
    3D Design
    Adobe Photoshop
  • $15 hourly
    Need Revit Works? I am BIM/Revit Drafter & Modeler for 7 years. I did various Revit works and I am skilled in Architectural, Structural and MEPF modeling. I am looking for long term partner in Revit Drafting. I am always available and ready to take the test. Best Regards. Services: *Revit Drafting/Modeling (Arch, Struct, MEPF) *PDF to Revit *Matterport to Revit *Point Cloud to Revit *Exterior & Interior Rendering *Lumion
    vsuc_fltilesrefresh_TrophyIcon BIM
    Residential Remodeling
    2D Design & Drawings
    Interior Architecture
    Rendering
    Modeling
    Drafting
    Drawing
    Architecture
    Construction Document Preparation
    Residential Design
    3D Modeling
    Building Information Modeling
    Autodesk Revit
    Architectural Design
    CAD Drafting
  • $7 hourly
    I am a licensed Civil Engineer with 7 years of experience in the construction industry. I have extensive experience in construction project management, designing, 2D drafting, 3D modeling, quantity take-offs and construction estimates. I am proficient in using the following software: -AutoCAD -Revit -Sketchup -Lumion -VRay -Planswift -Bluebeam Revu -Microsoft Office
    vsuc_fltilesrefresh_TrophyIcon BIM
    PlanSwift
    Bluebeam Revu
    Building Information Modeling
    Estimator
    Civil Engineering
    Autodesk Revit
    Autodesk AutoCAD
    CAD Drafting
  • $18 hourly
    I am a top-rated freelancer with several long-term clients and over 50 successful projects. I pride myself in satisfying my clients' needs and over-delivering to what is expected. SERVICES OFFERED: - Residential & Commercial Architectural Design - Land Use Planning - Space Planning - Carefully Thought-out Design - Drafting Support - Rendering - Construction Drawings WHY CHOOSE ME: - A solid track record as a top-rated freelancer on Upwork - Eight years of experience as a BIM Architect - Regulatory Expertise - Meticulous Approach - Commitment to Growth NOTEWORTHY ACHIEVEMENTS: - I successfully designed and obtained approval for a residential building in New South Wales, which has since been constructed and sold. - I contributed to designing a commercial building in California, attracting interest from a prominent coffee chain for leasing opportunities. - I taught Revit from basic to advanced levels for a leading design and construction firm while developing an automated estimator tool. - I provided graphic and animated product renders for a furniture company in Australia, enhancing their marketing efforts. - I established enduring friendships with architects, engineers, and contractors through collaborative endeavors, fostering a supportive professional network. If you're still reading, you've earned a complimentary consultation! Feel free to reach out, and let's discuss your project goals and how I can help bring your vision to fruition. Just say, "Hey Franziboi!" :)
    vsuc_fltilesrefresh_TrophyIcon BIM
    3D Modeling
    Architecture & Interior Design
    Photorealistic Rendering
    Visualization
    Architectural Rendering
    BIM Family Creation
    Commercial Design
    Concept Design
    Floor Plan Design
    Construction Document Preparation
    3D Rendering
    Building Information Modeling
    Architectural Design
    Residential Design
  • $19 hourly
    Hi, I am a registered Architect from Philippines, currently seeking opportunities here in Upwor.com to share my knowledge and skills in Design, 2D drafting, 3D modeling and Rendering using the tools like Revit, Autocad, Google Sketchup, Vray and Photoshop. I am dedicated to my assigned work and can beat time target with professional and above average quality at reasonable rate.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Construction
    2D Design & Drawings
    Architectural Rendering
    Building Information Modeling
    Autodesk AutoCAD
    3D Modeling
    Autodesk Revit
    CAD Drafting
    Architectural Design
    SketchUp
  • $30 hourly
    Looking to elevate your architectural designs with ArchiCAD? Let me be your go-to ArchiCAD Draftsperson and bring your visions to life in the digital realm of architecture. I specialize in ArchiCAD drafting and design, offering comprehensive support to architects, designers, and developers looking to streamline their workflow and create stunning architectural masterpieces. Here's how I can assist you: ✅ ArchiCAD Drafting: Transforming your ideas into detailed architectural plans and drawings using the power of ArchiCAD. ✅ 3D Modeling: Bringing your designs to life with immersive 3D models and visualizations that captivate clients and stakeholders. ✅ Photorealistic Rendering: Enhancing your presentations with a photorealistic Render that showcases your designs in breathtaking detail and realism. ✅ Building Information Modeling (BIM): Implementing BIM methodologies to enhance collaboration, efficiency, and accuracy throughout the design process. ✅ Project Coordination: Working closely with your team to ensure seamless coordination and integration of architectural elements. ✅ Quality Assurance: Conducting thorough checks and reviews to ensure compliance with building codes, regulations, and project requirements. Skills and Expertise: ✅Proficiency in ArchiCAD, with a deep understanding of its capabilities and functionalities ✅Comprehensive understanding of the Regulations and Building Codes of Australia ✅Extensive experience in residential and commercial architectural drafting ✅Strong grasp of building codes and regulatory requirements ✅Creative problem-solving skills, capable of overcoming design challenges with innovative solutions ✅Detail-oriented approach, ensuring accuracy and precision in every aspect of the drafting process Now Including REVIT Projects: In addition to ArchiCAD, I also undertake Revit projects for architectural plans, ensuring versatility and adaptability to meet diverse project requirements. By combining the strengths of both platforms, I aim to deliver exceptional results tailored to your specific needs. Let me be your trusted partner in architectural drafting and design, empowering you to focus on your creative vision while I handle the technical aspects with precision and expertise. Together, we can bring your architectural dreams to fruition.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Autodesk AutoCAD
    Autodesk Revit
    Lumion
    SketchUp
    3D Modeling
    3D Model
    Microsoft Office
    Drafting
    CAD Drafting
    Archicad
    Building Information Modeling
  • $50 hourly
    I possess 7 years of Architectural Designing and BIM modeling experience with Local, Australian, and American clients. Recently focusing in Preliminary Planning, Complete Working Drawings for Permit, and other Drawing Documentations with Detailing. Consistent Top Rated-Plus, Efficient and reliable with Quick turn-over rate. I am approachable, Open to requests, and commissions. Looking forward to collaborate your awesome projects.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Residential Design
    Construction Document Preparation
    Twinmotion
    CAD Drafting
    Autodesk AutoCAD
    3D Design
    CAD
    Building Information Modeling
    SketchUp
    2D Design
    Archicad
    Adobe Photoshop
  • $60 hourly
    Registered and licensed Architect from the Philippines. Principal architect at Saluhan Design Studio. Experienced in residential architectural design, interior architecture, and design-build projects. I specialize in modern, tropical, and mid-century designs. Proficient with: Autodesk Autocad and Revit Adobe Photoshop, Illustrator, and InDesign Sketchup and V-Ray Blender In addition to architecture, I also have more than six years of experience doing copywriting, content writing, technical writing, and customer support.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Technical Writing
    Content Writing
    Article Writing
    Autodesk AutoCAD
    Slang Writing
    Building Information Modeling
    Search Engine Optimization
    2D Design
    Blog Writing
    3D Design
    Blog Content
    Creative Writing
  • $35 hourly
    A am a BIM professional with 15 years of experience working in design and drafting works creating a complete and fully detailed models; Extensive experience in Mechanical piping, HVAC, Structural, Architectural documentation including renderings and realistic visualization. A team leader, trainer and can create custom workflow automation through dynamo.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Architectural Rendering
    Amazon DynamoDB
    MicroStation
    Template Design
    BIM Template
    2D Design & Drawings
    Residential Design
    Autodesk Revit
    Floor Plan Design
    3D Design
    Autodesk AutoCAD
    Building Information Modeling
    2D Design
    3D Rendering
    Architectural Design
  • $15 hourly
    I am proud to be recognized as part of the top 3% of talent on Upwork. As a professional architect with over 11 years of experience in design and construction, I specialize in a wide range of architectural services, including design architecture, site management, project management, CAD design, 3D design, and interior design. Throughout my career, I have successfully collaborated with clients across various countries, including the United States, Philippines, India, Italy, and Australia. I have designed and built more than 200 projects encompassing residential homes, commercial buildings, and industrial renovations and remodels. I am a certified expert in AutoCAD, SketchUp Pro, and V-Ray renderings, and I create detailed 2D and 3D plans, including immersive 360-degree renderings. My extensive skill set and dedication to excellence enable me to deliver high-quality architectural solutions tailored to meet the unique needs of my clients. ✅ Professional Architect with more than 11 years of experience in Design and Construction. ✅ Design Architect | Site Architect | Project Manager of an Architectural Firm | CAD Designer | 3D Designer | Interior Designer ✅ Have Client: US | Philippines | India | Italy | Australia ✅ Have designed and built 200+ Residential Homes, Commercial Buildings, and Industrial, Renovations and remodels. ✅ Expert and have a certificate in AutoCAD | Sketch-Up pro | V-ray Renderings | 2d and 3D plans including 360 Degree Renderings.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Exterior Rendering
    Building Information Modeling
    Rendering
    Drafting
    2D Drafting
    Design Concept
    Commercial Design
    Architectural Design
    3D Design
    3D Rendering
    Trade Show Design
    V-Ray
    Autodesk AutoCAD
    Interior Design
    SketchUp
  • $25 hourly
    ⭐⭐⭐⭐⭐"Arnel is a great structural detailer! He completed our shop drawings project with a quick turnaround and professional manner. He understood the requirements with minimal instructions, and contributed to the design with his excellent experience. He is friendly and nice to work with, and we will definitely hire him again for similar work" I have more than a decade of experience in Structural Engineering, mostly in modelling and detailing fabrication drawings of various steel structures such as Commercial and Industrial Buildings, Warehouses, and High-rise Buildings. 🏗️📐Here's what I normally bring to the table📐🏗️ ✅For Approval Package: 1. GA / Erection Drawings (3D view, HDB or Anchor Bolt Plan, Marking Plan, Elevations, Typical Connections) 2. Assembly Drawings 3. 3D Model in .ifc format 4. Material List / Advance BOM ✅For Fabrication Package: 1. Updated For approval package 2. Single Part Drawings (with NC and DXF Files) 3. Reports required by clients (Assembly List, Bolt Summary, etc.) 4. Any additional files required 🏆Reviews and Feedback from other clients🏆 The client reviews below describe the quality of work and value that you can expect from working with me. "Arnel is very good at his work. Has a good understanding of practical mechanics, and engineering. Proficient in CAD, super efficient with his time, and very responsive. His English is also very good." "Great Job again by Arnel on our last project!" "Quality professional, highly recommend."
    vsuc_fltilesrefresh_TrophyIcon BIM
    3D Modeling
    Steel Structure
    Drafting
    Tekla Structures
    Building Information Modeling
    Structural Detailing
  • $20 hourly
    I am a licensed architect, master plumber, master electrician, and environmental planner(urban planner). I have experienced both site and office works as an Architect and MEPF/Acoustic/AV and Security Systems Coordinator. I can offer you the following services with the best quality at a negotiable price. -3d modeling and rendering -design conceptualization -Floor plan or space planning -construction documentation -landscaping -plumbing design and calculation -electrical layout and calculation -HVAC layout -BOQ
    vsuc_fltilesrefresh_TrophyIcon BIM
    PlanSwift
    Twinmotion
    Bluebeam Revu
    Architectural Design
    CAD Drafting
    Plumbing
    Graphic Design
    Building Information Modeling
    Landscape Design
    ArcGIS
    Lumion
    SketchUp
    Autodesk Revit
    3D Rendering
    Adobe Photoshop
  • $20 hourly
    A highly rated, dependable, and collaborative freelancer specializing in engineering services. ☑️ Top Rated Plus ☑️ 100% Job Success Rate ☑️ Building Energy Modeling ☑️ Building Performance Analysis ☑️ Revit Modeling ☑️ Mechanical HVAC Design ☑️ Plumbing Design ☑️ Electrical Systems Design ☑️ DesignBuilder Software Specialist ☑️ Quantity Surveyor / Takeoff Specialist ☑️ Simulation and Analysis Specialist I am a Registered Mechanical Engineer and a Registered Master Plumber in the Philippines, with diverse experience in the following fields: -Building Energy modeling, simulation and analysis For US Clients, Creating proposed and baseline building models using ASHRAE Standard 90.1 Energy Standard for Buildings Except Low-Rise Appendix G. Run studies utilizing Design Builder and IESVE software For Australian Clients, Conduct building energy modelling (BEM) assessments and create accurate NatHERS energy rating models for residential and commercial buildings using HERO and BERS Pro -Mechanical Systems Design and Review (HVAC&R, Plumbing, Fire Protection, BMS, Elevator, Generator set fuel, LPG systems, Acoustics, etc.,) Design from conceptualization up to construction phase of residential, commercial and mixed used buildings (Local and International) that includes Thermal Load Calculation, Duct/Pipe Layout and sizing, Pressure drop Calculation, HVAC Schematics Diagrams, Equipment Schedule, Take-off and technical Specifications of the project in-line with current knowledge of appropriate codes and technologies: ASHRAE, Title 24, IECC, IMC, UMC, IBC, UBC, CIBSE, NFPA, LEED etc. Experienced in using Engineering software and Tools for Thermal Load Calculation (Carrier HAP, IES VE, Trane Trace 700, eQuest), Duct and Pipe Sizing (Mcquay Duct and Pipe Sizer), Psychrometric Analysis (Mcquay Psychrometric Analyzer), HVAC Quantity Takeoff (FastPIPE and FastDUCT), Fluid dynamic simulation (Pipe Flow Expert, AFT Fathom), Piping Stress Analysis (Caesar II), Building Performance Analysis (Design Builder, Hevacomp and EnergyPro), 3D Modelling (Solidworks, Revit, Inventor), FEA (Solidworks Simulation, ANSYS mechanical) and CFD (Solidworks Flow Simulation, Autodesk CFD and ANSYS Fluent) -BIM and coordination Creating and maintaining 3D models using BIM software (Autodesk Revit, Autodesk AutoCAD and Autodesk Navisworks) collaborating with architects, engineers, and other members of the design and construction team, ensuring the models are accurate and meet project requirements, and using the models to identify and resolve conflicts or issues during the design phase. Support constructability reviews, quantity take-offs and cost estimating. -Takeoff Specialist Utilize software such as Bluebeam, Fast Pipe and Fastduct to do takeoff of mechanical and plumbing plans. Rest assured, I am committed to delivering thorough and fair work at all times
    vsuc_fltilesrefresh_TrophyIcon BIM
    DesignBuilder
    Building Information Modeling
    MEP Design
    Industrial Design
    BIM Coordination
    Autodesk Navisworks
    HVAC System Design
    Quantity Surveying
    Mechanical Engineering
    3D Modeling
    2D Design
    SolidWorks
    Autodesk Revit
    Autodesk AutoCAD
  • $30 hourly
    Result-oriented mechanical engineer with experience and knowledge to evaluate a mechanical system, ability to communicate technical information in a precise and convincing manner and achieve project success by leading cross-functional teams in implementation of Building Information Models (BIM) for large-scale construction projects. Effectively managed projects before, during, and after construction through Implementation of BIM technologies.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Microsoft Excel
    Plumbing
    Autodesk BIM 360
    Microsoft PowerPoint
    Mechanical Design
    MEP Design
    Building Information Modeling
    Google Sheets
    AutoCAD HVAC Loads Calculations
    Microsoft Word
    Autodesk Revit
    3D Modeling
    Autodesk AutoCAD
  • $13 hourly
    👉 I am a Structural Engineer with over 7 years of extensive experience. I can offer the following services: 1. Structural Analysis, Design, Structural Plans for Residential Buildings from One Story up to Multi-Story Residence. 2. Structural Analysis, Design, and Structural Plans for Commercial Buildings from One Story up to Multi-Story. 3. Structural Analysis, Design, and Structural Plans for multi-story Commercial or Residential Buildings either Reinforced Concrete or Steel Structure. 4. Large Scale Warehouses with Column to Column span of 20m up to 40m Steel Structures or PEB. 👉 The software tools I proficiently employ in my work include: STAAD Pro RCDC STAAD Foundation RAM Connections RAM Structural Systems RAM Elements ETABS CSI SAFE AutoCAD Revit 👉 About Me: I graduated from MAPUA Malayan Colleges Laguna with a degree in BS Civil Engineering. Subsequently, I successfully passed the Licensure Exam administered by the Professional Regulation Commission (PRC) for Civil Engineers, earning my credentials as a Registered and Licensed Civil Engineer. Throughout my career, I have focused my expertise on Structural Design and Analysis, as well as Construction Estimation. 👉 I am dedicated to providing exceptional service and expertise in every project I undertake. Whether you need assistance with structural planning, analysis, or drafting, I am here to ensure the success of your project. Feel free to reach out to discuss your project requirements; I am just a click away and eager to assist you in any way I can. Thank you for considering my services. Best regards, Engr. Rhine Mar Esperanzate
    vsuc_fltilesrefresh_TrophyIcon BIM
    STAAD
    ETABS
    Structural Detailing
    Structural Analysis
    Cost Estimate
    Quantity Surveying
    Building Information Modeling
    Structural Engineering
    Autodesk Revit
    Autodesk AutoCAD
  • $10 hourly
    I am an Engineer for over 5 years. I have been working both as Site and Office Engineer for my first 3 years from my first employment. Got my 2nd job as BIM Modeler specifically STRUCTURAL, mainly modeling concrete and rebar modeling for a year and also provide Take-Off's both numbers and sheets. Currently working full-time in a Singapore based company as Design Engineer/ Revit Modeler.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Building Information Modeling
    Drafting
    Construction Estimating
    3D Modeling
    Quantity Surveying
    CAD Drafting
    Data Entry
  • $9 hourly
    A Freelance Licensed and Registered Architect in The Philippines since 2018 with professional experience from a wide array of projects from interesting small projects to large-scale mix-use projects both local and overseas developments (The USA, Japan, China, and Vietnam). -Residential Architecture -Commercial and Retail Architecture -Healthcare and Medical Facilities Architecture -Landscape Design I usually work in a team and collaboration with different professionals from diverse expertise in design, engineering, and management. Software that I use: -Autocad -Revit -Sketch-up -Photoshop -Lumion I am still pretty new in Upwork, and I hope you can help me build my profile and career here. I am open to accepting projects, and the rate is negotiable. I also have other freelance work that I did and it doesn't appear here but I could explain to you what can I do for your project based on your needs and qualifications. Thank you.
    vsuc_fltilesrefresh_TrophyIcon BIM
    CAD
    Landscaping
    Architectural Rendering
    Urban Planning
    Building Information Modeling
    SketchUp
    Autodesk Revit
    V-Ray
    Adobe Photoshop
    Lumion
    2D Design
    Landscape Design
    Archicad
    Autodesk AutoCAD
  • $16 hourly
    Welcome to my UpWork! I'm a Design Architect with international experience designing, planning, modeling, and constructing buildings small and large around the world. Here on UpWork I focus primarily on visualization, 3D modeling, and concept design. However, I offer the full range of architectural services from the earliest stages of a project up to fully operational buildings. If you have a project in mind, you're among the rare few bold enough to build something new, and I have the experience, design capabilities, technical skills, and tenacity to bring your ideas to life and make your dream a reality.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Architecture
    Site Planning
    Building Information Modeling
    Visualization
    Architectural Design
    Architectural Rendering
    Creative Writing
    CAD
    Lumion
    Autodesk Revit
    3D Rendering
    3D Modeling
    Adobe Photoshop
    SketchUp
  • $25 hourly
    Seeking CAD Drafting Assistance? 🥇🏆 𝐓𝐨𝐩 𝐑𝐚𝐭𝐞𝐝 𝐏𝐥𝐮𝐬 𝐂𝐀𝐃 𝐄𝐱𝐩𝐞𝐫𝐭 ☎️🕒 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐯𝐞 𝐚𝐧𝐝 𝐑𝐞𝐥𝐢𝐚𝐛𝐥𝐞 📉💲 𝐂𝐨𝐬𝐭-𝐄𝐟𝐟𝐞𝐜𝐭𝐢𝐯𝐞 𝐒𝐞𝐫𝐯𝐢𝐜𝐞𝐬 🔍 📐 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐏𝐞𝐫𝐟𝐞𝐜𝐭𝐢𝐨𝐧𝐢𝐬𝐭 💎 As a Top-Rated Plus CAD drafter, I'm known for quick responses and unwavering client satisfaction. Let my skills elevate your projects, building on the trust I've earned on Upwork. 🌟I am proficient in drafting: 📝Shop/Fabrication Drawings 📝Architectural Drawings 📝As-built Drawings 📝PDF to CAD Conversion 📝Fire Evacuation Plans 📝Structural Steel/Rebar Detail Drawings 📝Mechanical HVAC Drawings 📝Detailed Design Drawings 📝Telecommunication Drawings and more. 💻Software's I'm proficient in: 🛠️AutoCAD 🛠️AutoCAD Map 3D 🛠️AutoCAD Architecture 🛠️Autodesk Revit 🛠️Sketch Up 🛠️Enscape 🛠️V-ray 🛠️Google Maps/Earth 🛠️ Microsoft Office Suites (Word, Excel, PowerPoint) 🟢 Feeling the connection? Think we’d make a great fit? 💬 Let me know your thoughts! 📞 When’s the best time for a quick chat? I look forward to working with you! 😉
    vsuc_fltilesrefresh_TrophyIcon BIM
    Structural Detailing
    Autodesk Revit
    Telecommunications Engineering
    Mechanical, Electrical & Plumbing Systems
    Mechanical Design
    Electrical Drawing
    Steel Detail Drawing
    CAD Conversion
    Building Information Modeling
    3D Modeling
    2D Drafting
    SketchUp
    Autodesk AutoCAD
    CAD Drafting
    PDF Conversion
  • $30 hourly
    Looking for support in architectural projects? Feeling overwhelmed by tight deadlines? Take a deep breath and let me lend you a helping hand. With my BIM expertise, your drawing sets will come to life effortlessly. ‎️‍🔥‎️‍🔥‎️‍🔥Core Skills‎️‍🔥‎️‍🔥‎️‍🔥 💯BIM Capability and Collaboration (2D + 3D Modelling, Permit Drawings) ✏️Concept Development (Design & Planning – Architectural / Interior) 🖼️Project Renderings (Visualizations & Graphics) 🤝Technical Detailing and Coordination 🎯Quality Control I'm Ivy and I have talent extends to project renderings, where I utilizes my creativity and software skills to bring designs to life. My BIM expertise, attention to detail, and coordination abilities ensure that projects are executed with the highest quality standards. I have genuine commitment to prioritize client focus, recognizing the importance of understanding and meeting their needs. I actively collaborate and coordinate inputs from clients, ensuring that their expectations are not only met but exceeded. 💻Software Skills💻 ✅Revit Architecture (2D+3D, Preparation of Drawing Sets) ✅Autodesk BIM360 (Project Administrator, Publishing and Consuming models) ✅Navisworks for Clash Detection and Clash Report ✅Adobe Photoshop (Post-Production Rendering) ✅Adobe Indesign (Documentation and Presentation) ✅Lumion (Realistic Rendering, walkthrough, and flythrough) ✅Enscape (Realistic Rendering and walkthrough) ✅Sketch Up (3D Modelling) So, whether you're an experienced architect or a builder seeking assistance, I can support you to produce deliverables with high quality and on time. From drafting detailed drawings to creating stunning 3D renderings, I will ensure your project reaches its full potential. I will take care of the modelling technicalities, while you focus on your creative genius. Don't let stress get in the way. Reach out to me today, HIRE ME! I'll help you achieve project success!
    vsuc_fltilesrefresh_TrophyIcon BIM
    Building Information Modeling
    Construction Document Preparation
    BIM Family Creation
    2D Drafting
    3D Rendering
    3D Modeling
    Adobe Photoshop
    Autodesk Revit
    SketchUp
  • $22 hourly
    Since 2015, I am practicing professionally as an Architect or BIM specialist. I've been helping companies and individuals in solving AEC and BIM problems. I have been with companies that focuses on BIM services, Landscapes, Fire alarm systems, and Build and Design (Architectural, MEPF). Below are the services I can provide: - Building Information Modeling (BIM) (Revit): Do or create 3D models, families, clash detections, shop drawings, schedules, templates, markups creation/corrections, files (dwg, pdf, etc.) extraction, Scan to BIM, Phasing: Demolished, Existing, Proposed/New Construction, etc. I have experience working in workshared cloud models, BIM360, Revizto and Navisworks for coordination. -Architectural services: Do or create designs, plans, 3D visualizations, shop drawings, estimates, general architectural tasks and other related stuffs. Software skills: I am proficient on these following software: Revit, AutoCAD, 3ds Max, SketchUp, Revizto, Bluebeam Revu, Adobe Photoshop, Microsoft Office All the best. Let me know how can I help you.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Sales
    Real Estate
    2D Drawing
    Drafting
    3D Architectural Visualization
    SketchUp
    Autodesk 3ds Max
    3D Modeling
    Architectural Design
    Autodesk AutoCAD
    Building Information Modeling
    Autodesk Revit
  • $5 hourly
    I am an architect with experience in BIM modeling and full project management from start of design drawings to end of construction. As part of my previous experience, I am highly skilled in handling multiple projects and delivering all requirements in a timely manner. • BIM Modeler (Autocad, Archicad, Revit, Sketchup and Lumion) • Project Management • Creating Estimates • Experienced in designing from residential, commercial, industrial and land development projects.
    vsuc_fltilesrefresh_TrophyIcon BIM
    Microsoft Project
    3D Design
    3D Modeling
    Building Information Modeling
  • $40 hourly
    𝗔𝗯𝗼𝘂𝘁 𝗠𝗲: • Architect with expertise in Design Tech & BIM (Specializing in Autodesk Revit) • Experienced in BIM implementation, BIM Modeling & Documentation since 2013 • Owner of an outsourcing business, offering BIM and design services to companies worldwide (In Upwork, I do things myself but if the client wants more staff, then I can offer this as well.) • Worked on diverse projects across Singapore, Canada, and the US 𝗪𝗵𝗮𝘁 𝗜 𝗢𝗳𝗳𝗲𝗿: 1) 𝗕𝗜𝗠 𝗦𝗲𝗿𝘃𝗶𝗰𝗲𝘀: ✅Convert AutoCAD drawings, sketches, or SketchUp models into Revit ✅Create permit sets and tender drawings ✅Implement BIM processes for your company, including staff training 2) 𝗢𝘂𝘁𝘀𝗼𝘂𝗿𝗰𝗶𝗻𝗴 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀: ✅Provide efficient, cost-effective BIM and design support to businesses globally ✅Access a skilled team that ensures high-quality, timely deliverables 3) 𝗖𝗼𝗹𝗹𝗮𝗯𝗼𝗿𝗮𝘁𝗶𝗼𝗻: ✅I don't just do the work; I help identify design issues and guide you throughout the process ✅I ensure clear communication to meet your expectations and deliver quality results 𝗪𝗵𝘆 𝗖𝗵𝗼𝗼𝘀𝗲 𝗠𝗲? ✅Expert in BIM implementation (Autodesk Revit) ✅Specialized in various building typologies, including: ✅HDB, condominiums, schools, hospitals, data centers, and more ✅Experience in Singapore, Canada (mixed-use residential), and the US (landed residential) ✅Special offer for new clients: I'm offering discounted rates for my first 10 clients to gain reviews while providing expert service at a lower cost. 𝗟𝗲𝘁’𝘀 𝗖𝗼𝗻𝗻𝗲𝗰𝘁! Free consultation to discuss your project and see if I'm the right fit for your needs.
    vsuc_fltilesrefresh_TrophyIcon BIM
    BIM Template
    Expert
    Autodesk BIM 360
    BIM Implementation Plan
    BIM Family
    Native BIM Source File
    Autodesk Navisworks
    BIM Clash Detection
    Dynamo Studio
    BIM Family Creation
    BIM Coordination
    BIM Consultation
    BIM Quantity Takeoff
    Autodesk Revit
    Building Information Modeling
  • $20 hourly
    I am a creative generalist and licensed architect with over 13 years of experience across various design and art disciplines including architectural design, graphic design, 3D modeling, and animation. I have worked for a variety of projects and clients including tech startups, music artists, music festivals, Web3.0 platforms, government agencies, construction companies, real estate, content creators, and private art commissions. I am also an award-winning digital artist and photographer working under my alias, Lucius Felimus. My branding as an artist is all about sci-fi futurism, neon aesthetics, and the cyberpunk genre. My artworks and photographs have been featured in both local and international art exhibitions, galleries, and online publications. • I am experienced with 3D software including SketchUp, Blender, and Lumion for my 3D design, rendering, and animation work. I have been building a library of plugins and assets for several years. My experience spans 13 years across different types of 3D and design software. • I work with 2D design software as well in Adobe Creative Suite, including Illustrator, Photoshop, and InDesign. • I am experienced with animation, motion graphics, and video editing using After Effects and Premiere Pro. • I create content for my art brand social media using mobile editing apps such as Canva and CapCut. • As a licensed architect who has been working in the field for 8 years, I have expertise in architectural software including computer-aided design (CAD), building information modeling (BIM), 3D modeling, and architectural visualization. If there's a creative project you need done, let's get in touch!
    vsuc_fltilesrefresh_TrophyIcon BIM
    UX & UI Design
    UI/UX Prototyping
    3D Modeling
    3D Rendering
    3D Animation
    Graphic Design
    Building Information Modeling
    Motion Graphics
    Architectural Design
    Architectural Walkthrough
    3D Game Art
    Digital Art
    3D Design
    Animation
    Content Creation
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.