Upwork home
Sign up
Secondary

Hire the best Embedded Systems Engineers in California

Check out Embedded Systems Engineers in California with the skills you need for your next job.
Get started
  • $40 hourly

    • 5.0/5
    • (23 jobs)
    Over a decade of software development experience in Silicon Valley. Data scraping, data automation, and integrations. Full stack software development.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    React
    API
    Discord Bot Development
    Data Scraping
    Database
    Scripting
    Cryptocurrency
    Electronics
    Linux
    Web3
    Embedded System
    C++
    Arduino
    Python
    Firmware
  • $50 hourly

    • 5.0/5
    • (11 jobs)
    Software Engineer with 6 years of experience, passionate about the correctness of complex systems. Strong interest in hardware testing with a history of programming embedded systems. Worked closely with automation testers assisting in writing tests. Have included unit and integration tests in all software written.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Front-End Development
    Back-End Development
    Embedded System
    Autodesk Fusion 360
    Linux
    SolidWorks
    JavaScript
    Testing
    C
    Python
    Java
  • $50 hourly

    • 5.0/5
    • (4 jobs)
    Embedded Systems Hardware Design Altium Designer and KiCAD EDA • Analog front end hardware design for Infrared gas analyzers • Custom test equipment and test fixture development for volume production testing • Electronic valve control systems with active PID control • Embedded 2 Axis Solar tracker with Wi-Fi connectivity and web interface • IoT device development using Wi-Fi, Bluetooth and various protocols; SPI, UART, I2C • PCB layout which includes: High Speed Signals, Single ended and differential controlled impedance, Impedance matching networks, Integrated PCB antenna, HDI, Fine Pitch BGA, etc... • Electronic speed controllers and servo motor controllers • Brushed and brushless DC motor controllers • Buck / Boost / Flyback Switching regulator design • Power supply conducted emissions testing • Sensor Experience: Absolute Pressure, Differential Pressure, IMU, Encoders, Thermopile detectors, photo detectors, Current Sensors, 4-20mA, Strain Gages, Valve Position Indicators, Thermistors, RTC's, Quadrature Encoders • Test Equipment on Hand: Oscilloscopes, Function Generators, Spectrum Analyzer, Protocol Analyzer, Logic Analyzer, DVM, Digital Programmable Load Tester, LISN, EMI / EMC Compliance Testing Firmware Tech Stack: C, C++, MPLABX IDE, STM32CubeIDE, XC8, XC16, XC32 Compilers, PIC Family MCU, Assembly • Digital Signal Processing algorithms for low level analog systems • Proficient in C, C#, Python, VBA, PLC ladder logic, and JavaScript • RTOS / Bare Metal OS • PID Control Systems • System architecture development and documentation for electrical and mechanical hardware and software systems • Low level drivers for SPI / I2C / UART / DMA devices • Manufacturing and Production support for small scale consumer products Software Development Tech Stack: C#, Visual Studio, .NET, WPF, Blazor, ASP.NET core, PRISM, UNITY, SQL Server, Minio NoSQL, NUnit, XUnit, DevExpress, Git, Azure DevOps, Agile Workflow • Hardware abstraction layers and hardware monitoring systems for industrial machine control • SQL / NoSQL Database Implementation • UI / UX Development and Coordination • Machine Control Interfaces • Industrial IOT Project Planning and Leadership • Project requirements, scope, and definitions. • Detailed Project Estimation • Electrical / Mechanical Hardware, Firmware and Software architecture for Integrated Electro-Mechanical Systems
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Embedded System
    PCB Design
    C
    Digital Signal Processing
    Electrical Engineering
    Digital Electronics
    Embedded Linux
    Python
    Solar Design
  • $100 hourly

    • 4.8/5
    • (22 jobs)
    Hello, I have a Master's Degree in Electrical Engineering and 18 yrs experience working as a hands-on Electrical Engineer. I've worked on all aspects of electronics design: refining initial concepts, part search, SCH and PCB generation, testing, project management, customer relations, and more. I have worked on projects big and small, simple to incredibly complex. Most of my career has been working on dense embedded systems, including military radars and radar jammers. Don't hesitate to reach out to me. I'm interested to hear what you are working on.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Firmware Programming
    Arduino
    Eagle
    Hardware Design
    Hardware Prototyping
    Embedded System
    Embedded C
    Python
    RF Design
    Systems Modeling
    Analog Circuit
    Circuit Design
    Systems Engineering
    PCB Design
  • $120 hourly

    • 5.0/5
    • (12 jobs)
    I am an experienced firmware engineer, specializing in firmware for wireless technology (Bluetooth, Cellular, Wifi, LoRa and ZigBee). My experience supporting clients with their related needs in a wide variety of industries enables me to quickly understand complex problems, apply the correct frameworks and solutions, and deliver optimal solutions. I have a particularly significant amount of experience with BLE networks, ARM-Cortex based microcontrollers, and LTE modules, which have been high priorities for my clients. I can help you develop powerful embedded systems that will exceed your expectations. I design products that not only meet our customer's requirements but are beautifully simple and reliable. 🔑𝐊𝐄𝐘𝐖𝐎𝐑𝐃𝐒: Embedded Design, Hardware Design, Firmware Development, Mobile App Integration, IoT Device, Medical Device Design, Embedded Systems, Real-time Operating Systems (RTOS), Microcontroller Programming, Sensor Integration, Wireless Communication (Bluetooth, Wi-Fi), Low Power Design, Wearable Devices, Firmware Architecture, Embedded Software, Device Drivers, System-on-Chip (SoC), PCB Design, Signal Processing, IoT Platforms, Cloud Integration, Mobile App Development, Web Portal Design, Healthcare Technology, Remote Monitoring, Data Security, Telemetry, ARM Cortex, ESP32, Device Connectivity, Embedded Prototyping, Human-Machine Interface (HMI), Medical Device Compliance, Mobile-Connected Devices, IoT Security, BLE, Firmware Debugging, Connectivity Solutions, Edge Computing, Smart Devices, Industrial IoT.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Microcontroller
    Embedded System
    Python
    Microcontroller Programming
    Zigbee
    C
    C++
    WiFi
  • $110 hourly

    • 5.0/5
    • (30 jobs)
    Full-Stack Embedded Hardware and Firmware Engineer | IoT & Consumer Electronics Specialist | 13+ Years of Experience Introduction: I am a seasoned Full-Stack Embedded Hardware Design and Firmware Development Engineer with over 13 years of experience in bringing innovative products to life in consumer electronics, IoT, medical, automotive, and industrial sectors. My expertise lies in developing products from concept to production, ensuring high quality and efficiency throughout the process. Strengths and Skills: • Highly Proficient in detailed Schematic design incorporating Analog/Digital/Mixed-Signal IC Design. • Expert in multilayer PCB designs (upto 12 Layers) including FPGAs using tools like Altium, Eagle, KiCad, EasyEDA, and Diptrace. I have designed over 100+ boards in my career comprising of Rigid and Flex PCBA. • Skilled in Microcontroller SOC programming, Firmware debugging and development. • List of Microcontrollers that I have experience with: STM32, NRF51/52 series, TI TMS570/320, PIC, ATMEGA, ATTiny, ESP32, Microchip, Renesas R5/R7 series etc. • Expert in BOM selection, functional architecture design, and development board prototyping. • Strong connections with local and overseas manufacturers for producing cost-effective and quality samples swiftly for both prototyping and production. • Employs a group of app developers, backend web developers, and mechanical engineers for a comprehensive product development. Key Projects and Accomplishments: • Battery Management System: Led the Hardware and Firmware design of a BMS that accommodates a 4S1P configuration of prismatic cells with a 110A pulse discharge and a 60A continuous charge current. Other features implemented include overcharge protection, temperature monitoring, Passive balancing, Voltage and current measurements, LCD Display for UI. • Radiation measurement Instrument: Developed critical firmware and hardware to measure Alpha, Beta and gamma radiation via Ludlum Floor monitor and output highly accurate digital data in kcpm on an onboard LCD. The instrument also incorporate Bluetooth to communicate with mobile apps. • USB Hub 3.0 with over 15 ports: Designed a USB hub with multiple sub-hub controllers for data transfer over 15 USB-3.0 ports for super-speed transmission. The hub served as an interface between PC and devices such as Lidar, Realsense Camera, IMUs etc. Education: Master’s in Electrical Engineering from Santa Clara University, California. Closing Statement: With all the necessary resources at my disposal, I am fully equipped to breathe life into your new project ideas. Available for most of the day, my flexible time zone allows me to respond promptly to emails or calls. Whether you're looking for a dynamic addition to your project on a full-time, part-time, or project basis, I am eager to deliver excellence and innovation. Contact Information: I invite you to reach out to discuss your projects or any questions you might have. I'm open to both short-term and long-term engagements and am excited to help you achieve your project goals with high-quality, innovative solutions.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Microcontroller
    Hardware Design
    Amplifiers & Filters
    Digital Electronics
    Analog Electronics
    PCB Design
    Internet of Things Solutions Design
    Circuit Design
    Electronic Design
    Embedded C
    Embedded System
    Arduino
    Firmware
    ESP32
  • $114 hourly

    • 5.0/5
    • (52 jobs)
    Designer, educator, problem solver, and maker who exemplifies work ethic, the desire to learn and to teach, and problem solve. History of learning and applying new skills to complete new projects and solve problems. Experience both as a team leader, and as a member of a team. Expertise in: * Languages: C, C++, Python, Matlab * DevBoards/MCUs: STM32L4, RP2040, ATTINY, ESP32 * Software Development Tools: MPLAB X, CMAKE, VSCode, Arduino, Raspberry Pi * Equipment: Oscilloscope, laser cutter, CNC router, 3D printer, multimeter, soldering iron, MIG welder * Other Software Tools: KiCad, Onshape, Fusion360, LTSPice, Inkscape * Communication Protocols: I2C, SPI, UART, I2S, BLE, WIFI * Embedded skills: RTOS, Real Time Systems, Embedded Linux
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    C++
    STM32
    Hardware Design
    Embedded System
    Raspberry Pi
    Arduino
    ESP32
    Raspberry Pi Firmware
    Python
    C
    PCB Design
    Digital Signal Processing
    Linux
    KiCad
    3D Modeling
  • $50 hourly

    • 4.9/5
    • (2 jobs)
    I'm a roboticist/mechanical engineer/maker with practical experience in designing, integrating, and testing robotic hardware from conceptualization phase to final deployment. Examples of work I can provide include: developing sensor drivers; designing test platforms and hardware; coding/configuring simulations; documentation; solution-space trade studies; Microcontroller programming; and PCB design. My skills include: Python, C++, C, Linux, ROS, Git, EAGLE, MATLAB, SolidWorks, Arduino, Raspberry Pi
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Aerospace Engineering
    PCB Design
    Linux
    MATLAB
    Robotics
    C
    Prototyping
    SolidWorks
    Eagle
    Mechatronics
    Python
    Git
    Robot Operating System
    Embedded System
    C++
  • $50 hourly

    • 5.0/5
    • (3 jobs)
    Welcome to My Profile! Are you searching for a seasoned Product Design and Engineering Consultant with proven success and extensive experience across all fields of engineering, including time at prestigious organizations like Maxar Technologies? You've come to the right place! I am Adrien Carrou, a dedicated professional passionate about pushing the boundaries of innovation and excellence in product design and engineering. Who Am I? My name is Adrien Carrou, and I am deeply committed to the field of product design and engineering. My expertise is built on a robust foundation across multiple engineering disciplines, including embedded systems, electrical, software, firmware, and mechanical engineering. With extensive hands-on experience in research & development, prototyping, testing, and post-launch support, I am well-versed in every phase of product lifecycle management. My technical proficiency extends to advanced programming in C/C++ and Python, as well as full-stack development with technologies like React for frontend and various backend frameworks. I deliver a comprehensive array of services designed to meet and exceed your project requirements, ensuring innovation and excellence in every project I undertake. What Do I Offer? Research & Development: Competitive analysis and reverse engineering. Product Design: From concept design to design for manufacturing, PCB layout, and circuit design. Engineering: Specializing in electrical, software, and mechanical disciplines. Prototyping: Expertise in rapid prototyping techniques. Testing: Comprehensive testing across mechanical, electrical, and software domains. Post-Launch Support: Ongoing product revisions and enhancements. Why Choose Me? Proven Track Record: My extensive history with top-tier organizations and successful product launches demonstrates my capability to deliver exceptional outcomes. Advanced Tools and Technologies: I am proficient in utilizing a wide array of industry-leading software and programming languages that equip me to handle diverse and complex projects. My toolkit includes engineering design software like SolidWorks, simulation tools such as COMSOL and ANSYS, as well as comprehensive development skills in C/C++, Python, and full-stack technologies including React for frontend development and various backend frameworks. Combined with an advanced electronics prototyping setup and high-end 3D printing capabilities, I am ready to tackle projects of any scale or complexity. All-Inclusive Services: I offer end-to-end solutions from concept to product launch, tailored to your unique needs, all under a transparent, flat-rate hourly billing structure. Let's Work Together! Whether you're a startup eager to turn your vision into reality or a corporation aiming to expand your product line, I invite you to collaborate with me. Together, we can transform your ideas into successful products, ready to conquer the market. Reach out today to discuss how we can partner to foster innovation and ensure your project's success!
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Firmware
    System Automation
    Computer Engineering
    Electrical Design
    Python
    C
    C++
    Robotics
    Mechanical Design
    Full-Stack Development
    Software Development
    PCB Design
    Microcontroller
    Software Architecture & Design
    Embedded System
  • $35 hourly

    • 5.0/5
    • (2 jobs)
    As a dedicated freelance electrical engineer, I specialize in high-density PCB design and radio frequency (RF) technology, bringing reliable and efficient solutions to each project. Experienced in utilizing both Altium and KiCad for intricate design layouts, I also harness my skills in embedded programming to develop complex and responsive electronic systems. With a strong educational background and practical proficiency, I strive to consistently produce quality work and provide innovative solutions in the field of electrical engineering.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Robotics
    Control Engineering
    Linux
    C++
    Arduino
    RF Design
    Power Electronics
    Siemens NX
    Autodesk Fusion 360
    Altium Designer
    KiCad
    Embedded System
    PCB Design
    Multilayer PCB
    Embedded Application
  • $75 hourly

    • 5.0/5
    • (0 jobs)
    I'm an engineer skilled in the development of electronics for companies of any size. From the prototype stage to mass production, I can do it all. - Expert level software skills in C, C++, Rust, Python - Expert level hardware skills developing PCBs - Full development and testing lab in house - 4 years of professional product development experience
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Linux
    Embedded System
    Hardware Testing
    Hardware Prototyping
    Hardware Design
    Software Testing
    Software Design
    Firmware
    Printed Circuit Board
    Electrical Engineering
    Electrical Design
  • $50 hourly

    • 5.0/5
    • (1 job)
    I am a 10+ software engineer of all various platforms, languages and environments, in addition to a 7+ year firmware / hardware engineer. I am very well skilled in various MCU platforms, i.e. ESP32, STM32, Nordic, Silicon Labs, AVR, etc.., in addition to Raspberry PI, Beaglebone, embedded Linux platforms, etc.. I have plenty of my own hardware, including these devices, and sensors to prototype with right away. I have engineered projects in a variety of MCU's with GPS, Bluetooth, WiFi, LTE and LoRa, along with Android and iOS apps to communicate and control these devices. I have an extensive home office lab of scopes, meters, debugging devices / tools, hardware components, etc... In addition to firmware engineering, I've got plenty of experience in the software world, web servers / services, mobile apps, etc... Experience even with building custom Android OS'es and drivers for custom hardware. I have no doubt that with my embedded engineering experience and desktop/mobile software engineering experience, I can be your one stop shop here to engineer an entire solution for you, backend firmware to front end software. I work full time out of my home, and freelance engineering is my only profession, i.e. I don't moonlight. I generally work from 5:00 AM to 5:00 PM Central Time, however I am very responsive, even if not immediately in front of a computer, i.e. after hours, weekends, I pride myself on responding 99% within an hour if not faster, when possible.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Golang
    Xojo
    PyQt
    Embedded System
    .NET Framework
    Desktop Application
    C#
    C
    PIC Programming
    STM32
    Raspberry Pi
    ESP32
    Arduino
    Python
    C++
  • $167 hourly

    • 5.0/5
    • (45 jobs)
    "Jack of all trades, master of none" is typically said in a derogatory fashion, but I adopt the title gladly, and you will not likely find more than a few dozen generalists worldwide who can match my troubleshooting and problem-solving skills. I've been programming, on and off, for well over 40 years, if you count my study of BASIC in 1968, 6 years before I actually got my hands on a computer: the DECSystem-10 at Worcester Polytechnic Institute. As a result of working on computers and microcontrollers of various sizes and capabilities over the years, I have learned to get to the basics of a problem, come up with a prototype solution, and refine it to the customer's satisfaction. My methodology, which I found later is used by many successful programmers, is "build one to throw away"... once the code is working, rewrite it from scratch, correcting the false assumptions made in the first attempt, and refactoring to make a clean, maintainable, codebase. My background in both the electrical/electronics side of things plus years of experience reverse-engineering and improving software on dozens of different architectures gives me the rounded background necessary to take on projects which leave specialists lost. I may charge more than most, but when you've run up against a brick wall, I can likely find a way over, around, or through it.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    PostScript
    Linux
    Java
    C
    Debian
    Assembly Language
    Embedded System
    Linux System Administration
    HTML5
    JavaScript
  • $300 hourly

    • 5.0/5
    • (160 jobs)
    Versatile engineer focused on electronics and product design, with strong emphasis on high-complexity printed circuit board designs with a focus on design for manufacturability. I design, build, program, and test prototypes with in-house tools. I have served a wide variety of industries and have developed initial concepts and prototype devices as well as producing products that go into full scale production manufacturing. I work with clients and testing services to bring their product through regulatory and safety compliance testing and certification. Extensive design experience on Altium Designer, including detailed layout incorporating 3D CAD models. Certified IPC Designer Council PCB Designer (CID). Whether it's taking an existing Arduino / Raspberry Pi prototype and turning it into a in-production product, or developing a brand new idea from the early concept stage to attract investors, I enjoy providing you with technical solutions that are suitably engineered for your needs. I am a graduate of the California Institute of Technology (Caltech), with a B.S. in Engineering and Applied Sciences. I am located in the Pasadena / Los Angeles-area. I am a U.S. Citizen and am available for travel domestically and internationally. Key offerings: • System analysis and design, including key technical and market considerations for success • Electronics design and printed circuit board (PCB) layout with Altium Designer • Mechanical CAD work to supplement the electronics, including sheet metal work • Develop bare-metal firmware and embedded-OS software • Build and test prototypes • Process regulatory and safety testing and certification • Manage product manufacturing and logistics • Troubleshoot and fix failed devices and bad designs. • Assemble / repair prototype devices. I can use many formats of customer-supplied data from other electronics design software, and mechanical data from Solidworks and other standard CAD data formats. I have developed a wide variety of circuit boards, including: • Industry standard 4- and 2-layer boards with surface mount and through-hole components • Higher-complexity board (very high layer count, blind/buried vias, HDI) • High-speed / high-density boards with length-matching and tuning • Circuit boards with complex mechanical dimensional requirements • Flex and rigid-flex circuits with features on multiple work planes. • Products incorporating Bluetooth, BLE, WiFi, and serial interfaces (SPI, I2C, LIN, RS-232, RS-485) I design, assemble and test prototype electronics with in-house equipment. For volume production, I can arrange turn-key manufacturing for you. Partial list of equipment: • Prototype SMD assembly and rework tools • Othermill CNC PCB milling system • SMD Pick-and-place for short-run PCB assembly (over 3,000 CPH) • 3-axis CNC mill for enclosure / custom metal fabrication • Multiple 3D Printers. Print volumes up to 14" x 14" x 12.6" (355 x 355 x 320 mm) • 4-Channel 500 MHz DSO, 500 Msps logic analyzer • Thermal imaging camera Please feel free to challenge me with your tough projects!
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    PCB Design
    Embedded System
    Prototype Design
    Compliance Testing
    Multilayer PCB
    Altium Designer
    Mechanical Design
    Digital Electronics
    Product Development
    Firmware
    Engineering Design
    Hardware Prototyping
    Electrical Engineering
  • $150 hourly

    • 4.9/5
    • (33 jobs)
    I provide my clients with end-to-end product design services, utilizing over 30 years of electronics design experience and the best design tools,. I specialize in embedded processor applications including hardware and software development. Taking the product design from concept to prototypes, I provide high quality documentation suitable for immediate manufacturing of your product., and am often providing support once we're in production, supplying custom test software and test equipment, fixtures and documentation. I provide excellent quality documentation, quick-start guides, operating manuals, Theory of Operations, to support the product well past the design phase. At my disposal: a multi-disciplinary skill set including analog, digital, embedded, mechanical, packaging, electro-optics, PC, automotive, hardware and software and thorough understanding of the physics of sensing the real world and turning that into usable data in the embedded world. Extensive electronic product design experience using Altium, OrCAD, EasyPC, SolidWorks for circuit and packaging design, Altera, Xilinx for FPGA design, CodeWarrior, VisualStudio, IAR, Keil, CodeComposer, AVR Studio for software development, Freescale, TI, Atmel, STMicro, NXP devices and software. Using Xilinx Zynq, Artix, Spartan FPGA and CPLD logic families. IoT, ZigBee and 900 MHz designs using RF modules and discrete level. Extensive software development in C, C++, C#, assembly languages for embedded applications ranging from consumer products to aerospace systems. Using CAN J1939, CANopen, USB FS/HS , USB 2.0, USB 3.0, CameraLink interfaces -- both hardware and software design. I have tools to provide simple to complex PCB design for consumer, industrial, aerospace and scientific applications, including high-density dual-sided SMT.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Wireless Network Implementation
    ARM Microcontroller
    Embedded System
    PCB Design
    USB Electronics
    C
    Digital Electronics
    Digital Signal Processing
    Amplifiers & Filters
    C++
    C#
    Analog Electronics
    Project Management
    Mechanical Design
  • $150 hourly

    • 4.7/5
    • (24 jobs)
    Electronic Engineer - I Help You Bring Practical & Profitable Solutions To Market I’ll help you take your idea... to a schematic, to a PCB, then integrate software, take it to production, debug, document the process and get it out the door onto the market on time and under budget. I’m your go-to guy when you need technical skills to transform big ideas into tangible real-world practical and profitable solutions. • Need layouts and/or schematics verified? • Want enclosure design or retrofit electronics? • Seeking firmware design/development involving micro-controllers. Call Kevin. Who am I? I dig aerospace, rockets and airplanes. • I’m quick to absorb, understand and build on the information you give me. • When I see a problem, I step in to help solve it. And step away if I’m not required. • I’m trustworthy & honest, easy-going and love solving tough engineering problems. Who am I looking to work with? I want to help great start-ups bring great ideas to life and impact society positively. Honestly, I couldn’t think of anything more satisfying than being part of a project that makes life better for hundreds, thousands or even millions of people and contributing to the world in a positive way through engineering. What I do is a real passion for me, not just a job. And because I understand that the most important investment you can ever make in your business (besides product development) is in the team you build. I would greatly welcome the opportunity to be part of your project. I started my career as a technician and worked my way up to engineer. I have a rare combination of skills, knowledge & experience, and I know what it takes to make your project successful. I am 100% dedicated to my craft and I love to win. Let me help you win. ________________________________________ Experience: I use Altium Designer for all schematic and PCB needs. Worked on designs from simple 2 layer designs to complex 18 layer designs with high-density mixed signal designs from DC to 32GHz. This includes high-density DDR designs. Worked with Bluetooth, WIFI, IoT, PCIe. SPI / I2C / I2S / RS-232 / RS-422 / RS-485 Analog Design ( DAC / ADC / Op-Amp ) FPGA - Aritx / Kintex / UltraScale / Spartan Firmware: Microchip/Atmel 8 bit, 16 bit, 32 bit microcontrollers STM32 with LCD GUI interfaces FPGA design with VHDL with Xilinx or Altera Software: Altium MPLABX STM32CubeIDE / STM32CubeMX / TouchGFX Python and C/C++ LabWindows SystemVue ADS Projects: IoT for Marine application (Particle System used) PEMF (Pulsed Electromagnetic Field Therapy) Consumer Product with touch screen GUI Ultra-Compact Audio Debug Tool for Audio Engineers 12ch 50Gbps PRBS generator 64Gbps PRBS/Pattern generator 60Gbps Error Detector 1-32GHz Synthesizer 1-18GHz Spectrum Analyzer 6GHz VSWR PoE Analyzer 18 layer HDI Motherboard with high-speed HDI layout Rigid Flex PCB 6GHz VSWR PoE IoT 10GHz Antenna Array Batteries / BMS controllers When you need a freelance staff engineer to help you get a project over the line on time. Call your reliable & trustworthy freelance software engineer Kevin Regan. See video below. Search LinkedIn Profile: Kevin Regan
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Electronics
    Analog Electronics
    Altium Designer
    PCB Design
    VHDL
    Circuit Design
    Electronic Design
    Digital Electronics
    Analog Circuit
    C
    Microcontroller Programming
    Python
    Embedded System
  • $50 hourly

    • 5.0/5
    • (2 jobs)
    I have experience designing various new electronic products for different startup companies in the San Francisco Bay area. I have engineered a high-tech stylus pen device featuring wireless earbud, motion sensing and bluetooth technology. PCB designing and PCB assemblies is my prime skill and interest. I have experience in tools like Altium Design, Eagle, Proteus and other integrated Development IDE's such as IAR Embedded, Keil, S32K DS etc. Also, I have many experience in mechanical design, analysis & simulation, CNC programming, 3D Modeling, 3D Rendering. I use SolidWorks, CATIA, Siemens NX, MasterCAM, Ansys, AutoCAD and Blender, 3Ds Max, SketchUp so on.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Microcontroller Design
    Mechanical Engineering
    Altium Designer
    CNC Programming
    Microcontroller Programming
    Microchip
    PCB Design
    Embedded System
    3D Modeling
  • $140 hourly

    • 0.0/5
    • (0 jobs)
    Transforming complex ideas into innovative, high-impact solutions through expert R&D, AI, and cybersecurity. I help clients accelerate innovation and bring groundbreaking technology to market faster by leveraging cutting-edge R&D, cloud, and embedded systems expertise. My work reduces time to market, eliminates development miscommunications, and speeds up prototyping iterations—saving clients time and money. With 20 years of extensive experience in land, sea, and air support projects across industries like aerospace, crypto, finance, defense, and medical, I specialize in transforming ideas into functioning products. My expertise spans cloud technologies, AI, and cybersecurity, making me your go-to partner for secure, scalable, and high-performance solutions. Key Expertise: - Cloud & Embedded Systems: Proficient in AWS, Azure, GCP, and embedded platforms like Arduino and Raspberry Pi, I bring applications to life with optimized performance and security. - AI & Machine Learning: I’ve built advanced AI systems for everything from stock trading to cancer detection, always with an eye on reducing risks and improving outcomes. - Full-Stack & Mobile Development: From Unity-based business applications to high-performance mobile apps, I deliver solutions that are fast, reliable, and user-friendly. - Cybersecurity: With 15 years in cybersecurity consulting and penetration testing, I ensure that every solution is secure from the ground up, protecting your data and assets. What Sets Me Apart: - Rapid Prototyping: I quickly identify challenges and develop optimized solutions, reducing iteration time and accelerating product development. - Holistic Approach: Whether it's automation, containerization, or deep learning, I integrate the right technologies for a seamless, scalable, and cost-efficient solution. - Passion for Innovation: I thrive on solving the toughest challenges, turning complex problems into opportunities for breakthrough innovations. I’m excited to bring your vision to life with robust, scalable solutions that are built to last. Let’s work together to create technology that drives success! Learn more about me at: maximusblackbourne.com Maximus
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Embedded System
    Machine Learning
    Blockchain Development
    Full-Stack Development
    Cloud Computing
    DevOps Engineering
    Cloud Architecture
    Automation
    Data Science
    C++/CLI
    Ruby
    Penetration Testing
    Python
    Database
    Artificial Neural Network
  • $80 hourly

    • 0.0/5
    • (1 job)
    I have been designing and programming custom Circuit Boards with various MCU's for over 8 years. I engineered and manufactured traffic safety lights, wirelessly controlled exercise equipment for classes and even spinal measurement tools. Small scale or large scale, I can design, program and manufacture just about any electronics component. If it has wires or a circuit board I will make it fast and right.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Hardware Prototyping
    Analog Electronics
    PCB Design
    Multilayer PCB
    Circuit Design
    Digital Electronics
    Raspberry Pi
    Microcontroller Programming
    Embedded System
    C
    ESP32
    Python
    Arduino
    C++
  • $75 hourly

    • 0.0/5
    • (3 jobs)
    Aaron is a multi-faceted electronics and software engineer with years of experience and technical know-how. Specializing in Bluetooth Low Energy software and circuitry, Aaron can deliver FCC certifiable BLE systems fast with his custom drivers and frameworks for the Nordic Nrf52 chip. But Aaron's expertise doesn't stop there. Having ample experience with mobile application development, hardware design, 3D design, prototyping, and manufacturing, he can help supercharge your R&D and get your product from rough concept to reality.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Mobile App Development
    Computer Hardware Design
    Software
    Java
    Android App Development
    C
    Verilog
    Bluetooth LE
    PCB Design
    Electronic Circuit Design
    Embedded System
    Industrial Design
    C++
    3D Printing
    3D Modeling
  • $100 hourly

    • 0.0/5
    • (0 jobs)
    March 2023 SKILLS SUMMARY Software engineer with 40 years of experience in embedded hardware and software design and development. Programming at all levels from kernel internals and device drivers through middleware and applications. * Languages: Expertise in: Assembly, C, C++, and Python. Comfortable with Java, PHP, JavaScript, and more. Open to learning Rust, R, Go, Dart, ... * Processors: ARM, PowerPC, Arduino, x86, 8052, 6802, PIC. 64-, 32-, 16- and 8-bit processor architectures. DSPs and SOCs * Operating systems and environments : Linux, FreeRTOS, Android, Arduino, Windows, VxWorks, pSOS. * Technologies and Protocols : USB, I2C, SPI, UART, Flash programming, Timers, DMA, DRAM, WiFi, Interrupt controllers, Memory controllers, Remote software update * Development tools: In Circuit Emulators, logic analyzers, oscilloscopes, git, gdb, eclipse, IntelliJ, gcc, CMake, JTAG, spectrum analyzers.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    C
    Embedded System
    Firmware Programming
    Firmware
    Hardware Troubleshooting
    Embedded Operating System
    Embedded Application
    Software Debugging
    Driver Development
    C++
    Embedded C
    Embedded Linux
  • $70 hourly

    • 0.0/5
    • (1 job)
    SUMMARY: * Firmware/Embedded/IoT Engineer with 12+ years of experience * Delivered innovative products by successfully leading firmware development teams for new projects/features from inception to completion by contributing to product definition, scoping the work and providing timelines * Expertise in sensors and wireless technology
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Hardware Prototyping
    Git
    Firmware Programming
    Python
    C
    Firmware
    Embedded System
  • $80 hourly

    • 0.0/5
    • (2 jobs)
    I've worked on networking devices/protocols, embedded devices, and Arduino projects, as well as industrial strength networking and application observability with eBPF. Aside from accomplishing the main goals/requirements, my favorite thing is streamlining the developer build/test experience, so that debugging cycles are less time consuming, and bugs are automatically found.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    CAD
    3D Printing
    Firmware Programming
    TCP/IP
    Git
    Software
    Bash
    Java
    Golang
    Arduino
    C++
    Embedded System
    Python
    JavaScript
    C
  • $25 hourly

    • 5.0/5
    • (1 job)
    I am a software developer with experience contributing to open source projects. I have written and designed the firmware for WiFi-connected full-body haptics in VR. I am proficient in python and have designed servers and UI configuration tools. Further, I have made contributions to large-scale projects utilizing the Unity game engine. I am also interested in Rust and have written web servers using various frameworks.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Git
    Rust
    Python
    Embedded System
    C++
  • $30 hourly

    • 4.9/5
    • (18 jobs)
    Welcome to My Profile! Are you seeking a seasoned Product Design & Engineering Consultant with a wealth of experience and a track record of success? Look no further! With a background involving many projects including a custom Avionics Development Board, Cube Satellite Board, as well as experience as both a Lead Electrical Engineer for the SJSU Cube3 club and a Research Assistant for the SJSU Research Foundation, I bring my expertise to the table. Who Am I? I am Michael Xiao, a dedicated professional with a passion for innovation and excellence in product design and engineering. With a solid foundation in electrical, software, and mechanical engineering, combined with extensive experience in research & development, prototyping, testing, and post-launch support, I offer a comprehensive suite of services to meet your needs. What Do I Offer? My areas of expertise include: Research and Development: Competitive Analysis Reverse Engineering Product Design: Concept Design Design for Manufacturing PCB Design Circuit Design Engineering: Electrical Mechanical Software Prototyping: Rapid Prototyping Testing: Electrical, Mechanical, and Software Testing Post Launch Support: Product Revisions Why Choose Me? Prove Track Record: With a rich history of working and contributing to successful product launches, I have the expertise to deliver results that exceed expectations. Advanced Tools: Leveraging industry-leading software such as Cadence OrCad, Altium Designer, easyEDA, and others, coupled with an electronic prototyping setup and a high-end 3D printer, I am equipped to handle projects of any scale or complexity. All-Inclusive Services: From concept to prototyping, testing, and post-launch support, I offer end-to-end solutions tailored to your unique requirements, all under a flat-rate hourly billing structure for transparent and predictable pricing. Let's Work Together! Whether you're a startup looking to bring your vision to life or a corporation seeking to enhance your product portfolio, I am here to help. Let's collaborate to turn your ideas into reality and achieve unparalleled success. Reach out today to discuss how we can partner together to drive innovation and bring your products to market with confidence!
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    OrCAD
    EasyEDA
    Altium Designer
    Cadence Platform
    Embedded System
    JavaScript
    Java
    Python
    C++
    C
    Schematic
    Multilayer PCB
    PCB Design
    Computer Engineering
    Electrical Engineering
  • $100 hourly

    • 0.0/5
    • (0 jobs)
    Embedded system software developer and tech lead with broad experience on networking, video, storage and DSP systems. Specialties: Firmware, Linux and BSD kernel, PCI, device driver, boot-loader, board bringup, DSP
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Database
    Virtual Machine
    IT Infrastructure
    Driver Development
    Kernel
    PCI
    Rust
    Linux
    Computing & Networking
    Computer Network
    Network Engineering
    Firmware
    C
    Python
    Embedded System
  • $95 hourly

    • 0.0/5
    • (1 job)
    Embedded firmware and software designer/developer with emphasis on control systems. Excellent problem solving skills for building products that are extendable and maintainable. Particularly interested in device communications and motor control. Specialties: Embedded systems firmware design, customizing uBoot and Linux, diagnostics.
    vsuc_fltilesrefresh_TrophyIcon Embedded Systems
    Embedded System
    Bash
    C++
    C
    ARM Microcontroller
    System Programming
    Linux
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by 5M+ businesses