Hire the best Mechanical Engineers in Maryland

Check out Mechanical Engineers in Maryland with the skills you need for your next job.
  • $60 hourly
    I am a licensed Mechanical Engineer who provides Professional Engineering services for residential and commercial construction projects. I am also certified by ASHRAE and ACCA as a designer for commercial and residential buildings. My areas of expertise include MEP Design, Mechanical Design, HVAC design, Plumbing Design, Electrical Design, load calculations, energy code compliance, energy modeling, Architectural, Floor plans and Site plans. My PE capability allows me to be a one-stop-shop for research, design, review, and certification of plans, drawings and engineering documents. I'm also proficient in: Mechanical Design Electrical Design Plumbing Design HVAC Design Consultation Research Design Project management PE design, review, stamp and seal Energy Modeling Energy Code Plan Reviews REMRate, Ekotrope, eQuest, Energy Gauge, Beopt, Revit & Beopt software services Energy Code Analysis, Research & Updates Energy Efficient HVAC Systems Design and Analysis Load calculations Energy management RESNET ASHRAE 90.1 compliance IECC compliance ENERGY STAR Compliance COMCheck & RESCheck Energy Calculations Renewable Energy Green Building Cogeneration Comprehensive services in MEP Energy Audits, Analysis, and Conservation Studies Mechanical Permits Commissioning & Retro-Commissioning Manual J Manual S Manual D Manual T Manual N Manual Q Residential Load Calculations Residential Duct System Design Commercial Load Calculation Commercial Duct System Design Site Plan Floor Plans Architecture Pressure, Velocity Duct Design System Design and Equipment Sizing Airflow Distribution Design and analysis HVAC Quality Installation Specification ACCA Standard 5 ACCA Duct Slide Rule ACCA/ANSI Quality Installation Specification Architectural Design including floor plans.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Mechanical, Electrical & Plumbing Systems
    Mechanical Design
    Energy Simulation
    MEP Design
    Energy Engineering
    Electrical Drawing
    Building Energy Certification
    Energy & Utilities
    HVAC System Design
    AutoCAD HVAC Loads Calculations
    National Electrical Code
    Plumbing
    Electrical Layout Design
    Electrical Engineering
    Energy Optimization
    Electrical Design
    Autodesk Revit
  • $35 hourly
    Hello! I am a recent graduate from the University of Maryland with a degree in mechanical engineering and minor in sustainability. I grew up in Howard County, Maryland and attended Glenelg High School before moving to Houston, Texas, where my family currently resides. Through my travels, I've developed a deep appreciation for various cultures. In addition to my studies, I am an active member of the American Society of Mechanical Engineers, which keeps me up to date with the latest advancements in my field. I look forward to pursue career in Project Management and further develop my skills and knowledge in underground pipeline trenchless systems.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Web Application
    Web Service
    Engineering & Architecture
    Graph
  • $100 hourly
    José de Jesús Salazar-Torres obtained a Bachelor’s degree with honors in Biomedical Engineering from Universidad Iberoamericana in Mexico City, Mexico; subsequently, he was awarded a scholarship by the Overseas Research Students Award Scheme and Newcastle University to read for a Ph.D. in Mechanical Engineering (Biomechanics) with the project "Biomechanical Analysis of Stretch Reflex Responses: An Approach to Spasticity Measurement", where he graduated in 2005. He is a Registered Clinical Scientist (Medical Physics and Clinical Engineering) by the Health and Care Professions Council in the UK. He is currently a Biomechanical Research Engineer in the Gait Analysis Laboratory at the Nemours/A.I. duPont Hospital for Children, where he is responsible for collecting, processing, and analyzing gait and upper limb motion capture data in children with orthopedic and neurological conditions. He is involved in several research projects investigating gait patterns in children with cerebral palsy, idiopathic scoliosis and arthrogryposis. He is responsible for statistical design, analysis, interpretation and reporting for national and international conferences and peer-reviewed journal publications. He previously managed the Gait Analysis Laboratory in Musgrave Park Hospital in Belfast, Northern Ireland (2005-2018), where he was responsible for the management, development and delivery of the gait analysis clinical service, and he was a member of the regional gait analysis multidisciplinary team responsible for treatment decision-making in children and adults with neurological and orthopedic conditions. His responsibilities included the delivery of lectures and training to students in Biomedical Engineering and Physiotherapy on the principles of gait and motion analysis. This allowed him to develop scientific, docent, and technical skills in motion analysis, orthopedics and neurological rehabilitation. He was previously Junior Research Associate at the Centre for Rehabilitation and Engineering Studies (CREST) in Newcastle University in the UK (2002-2004). He has been awarded research grants and he has obtained external funding to improve and expand the research and clinical capabilities of the regional gait analysis laboratory in Northern Ireland (£202,000). He is a member of the Editorial Board of the journals ‘Gait and Posture’, and ‘Physical & Occupational Therapy in Pediatrics’ and a reviewer of several journals in Engineering, Physiotherapy, Orthopedics and Neurorehabilitation. He was the principal Investigator in research projects exploring gait patterns in knee and hip arthroplasty and the lead investigator in a research project evaluating two different upper limb prostheses in activities of daily living. He was a member of the executive committee of the Musculoskeletal & Rehabilitation Translational Research Group (MRTRG) at the R&D Office, Northern Ireland; External auditor for the Clinical Movement Analysis Society – UK and Ireland (CMAS). He is interested in the assessment of arthroplasty, orthotics, prosthetics, spasticity, dystonia and complex movement disorders.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Scientific Research
    Video Editing
    Research Papers
    Statistics
    Microsoft PowerPoint
    Medical Imaging
    Technical Writing
    Writing
    Academic Writing
    Proofreading
    Grant Writing
    Python
    Microsoft Excel
  • $50 hourly
    I'm a mechanical design engineer skilled with: - Machine design - CAD modelling (SolidWorks, Solid Edge, Autodesk Inventor, Fusion360) - Engineering drawings - Rapid prototyping (particularly 3D printing) - Engineering analysis - Technical writing Whatever stage your project is at, from conceptualization and design, to testing and verification, I can bring the technical expertise you need. I've completed abandoned projects left half-finished by others, as well as seeing projects from the conception to launch. On a personal note, I am currently in the process of designing a solar-powered desalination device for use in low-resource settings with limited access to fresh water. Some of the earnings I make here will support the development of this technology.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    MATLAB
    3D Printing
    Drafting
    R
    Solid Edge
    Mechanical Design
    Visual Basic for Applications
    CAD Software
    Project Management
    Technical Writing
    Autodesk Inventor
    Autodesk AutoCAD
    SolidWorks
    Adobe Illustrator
  • $25 hourly
    I am a full time student at the University of Maryland, Baltimore County studying Mechanical Engineering.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    MATLAB
    CAD
  • $56 hourly
    I am an Engineer experienced in preliminary and deliverable product design. Whether you need a small sheet metal bracket or you're looking for an industrial conveyor assembly I can work with you to design exactly what you need. I am a certified Solidworks mechanical design expert as well as one of only 400 Solidworks champions in the world I am well versed in all aspects of the design process and I hope to use my skills to exceed your expectations of what you're looking for.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    3D Design
    SolidWorks
    Modeling
    CAD Conversion
    CAD
  • $75 hourly
    My skills combine trend data analytics, energy auditing, commissioning, and sequence of operation (SOO) expertise to deliver professional technical reports and data analysis aimed at driving massive building performance and comfort improvements. My services often require that I gain access to as much building data as possible including MEP drawings, site photos, existing SOOs, trend data, and BAS screenshots.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Report Writing
    Energy Optimization
    Sequence Analysis
    Trend Analysis
    Energy Engineering
  • $35 hourly
    I'm a mechanical engineer with vast experience in 3D design, fabrication, testing, and data analysis. I often rely on 3D printing for rapid solutions to the needs of my company, such as designing custom brackets for mounting instrumentation equipment. Additionally, I'm skilled in several programming languages including Matlab and SQL. Whether you need help with 3D design, prototyping, or data modelling and analysis, I can help.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Engineering & Architecture
    Modeling
    CAD
  • $60 hourly
    PROFESSIONAL SUMMARY Highly skilled Energy Project Manager with extensive experience in managing energy conservation and sustainability projects for multifamily and commercial buildings. Expertise in overseeing utility programs, conducting energy audits, and using energy modeling software to suggest energy conservation measures. Strong background in stakeholder collaboration, costbenefit analyses, technical oversight, and compliance with energy efficiency standards. Demonstrated ability to lead and mentor teams, delivering projects within timelines and budgets while achieving measurable energy savings. ADDITIONAL QUALIFICATIONS * Experienced in developing custom incentive applications and conducting QC for virtual and on-site inspections. * Skilled in mentoring and managing teams to optimize performance and align with organizational objectives. * Familiar with energy management systems, industrial refrigeration, boiler systems, and
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Civil Engineering
    Engineering & Architecture
    Structural Engineering
    Construction Monitoring
    Architectural Design
    Construction
    Architecture
    Energy
  • $18 hourly
    Work experience: I work at VanMetre Trucking. I'm good at using my hands and problem solving. I've had experience welding in my power mech class in high school for 2 months. I've also welded at VanMetre shop. I am very good at problem solving and making things work to get the job done. I'm a decent Ark and Mig welder., Highlights: * work good in teams * know my way around mig and ark welders. * Available to work night and weekend * Prepare Broken parts for welding by properly groveling and cleaning the surface * Precision cuts with hand tools . VanMetre trucking Big pool Maryland Mechanic / welder Montierd the fitting burning and welding process to avoid shrinking distortion and expansion. Adjusted functional parts of equipment and control instruments Followed all safety guidelines including proper machine guarding and lockout procedures. Also i do alot with computers i build computers on the side im a person with many hobbies and i
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Welding
    Tech & IT
  • $30 hourly
    Hands on and mechanically inclined since I could remember. I am a hobbyist fabricator and welder with on-the-job experience in CNC machining, cam software, SolidWorks, and AutoCAD. I am interested in all things mechanical (anything with wheels) outdoors and spending time with my family.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Engineering & Architecture
    CAD Conversion
    CAD
    Modeling
    Manufacturing
  • $40 hourly
    I’m a mechanical engineering with experience in project management. I am great with handling logistics.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Construction Monitoring
    Construction
    Engineering & Architecture
    Structural Engineering
  • $15 hourly
    I am a robotics creator and have built multiple robots that have been powered by electricity and ingenuity.
    vsuc_fltilesrefresh_TrophyIcon Mechanical Engineering
    Modeling
    Electrical Engineering
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by 5M+ businesses