Hire the Best Hardware Engineers

Hello! I’m Ben, a hardware and firmware expert with 8+ years of experience in designing hardware, programming embedded systems, and developing high-performance software solutions. My goal is to provide innovative, reliable, and high-performance solutions that meet your needs. With a strong track record on Fiverr (Level 2, 5 stars) and Upwork (Top Rated Plus, 5 stars), I have successfully delivered top-tier service to over 100 clients. What I Offer 1. End-to-End Embedded & Hardware Solutions - Advanced PCB Design & Hardware Development: Expertise in schematic capture, PCB layout, and multi-layer board design for reliable, high-performance, and manufacturable products. Experienced with KiCad, Altium, OrCAD, and Eagle. - High-Speed Design: Strong experience in 1–12 layer PCBs, including DDR3/DDR4/LDDR4, PCIe, USB (2.0/3.0/3.1/3.2), HDMI and 10/100/1000/10Gbase-T1 Ethernet. - Microcontrollers & SoMs: Firmware and hardware development for ARM Cortex-M3/M4 (STM32, ESP32, Nordic nRF52/53/91 series); custom boards for Raspberry Pi CM4/CM5, Orange Pi, iMX8, Jetson Nano/Xavier/Orin, RK3588, RK3568, RV1126, Allwinner, Zynq-7010. - Power & Hardware Integration: Experience in DC-DC, AC-DC, Buck, Boost, and Flyback converters, along with hardware design involving audio, RF modules, PA, LCD, filters, RFID, touch screens, and LVGL-based interfaces. - Prototype, Testing & Validation: Full support for board bring-up, debugging, validation planning, and functional testing to ensure hardware works reliably in real-world applications. - Manufacturing & Prototyping Support: Preparation of BOM, Gerber, and manufacturing-ready files, with hands-on support for prototype production and manufacturing through JLCPCB and PCBWAY. 2. Robust Firmware Development - Languages & Development: Strong embedded firmware development in C/C++, Python with experience using Visual Studio Code, STM32CubeIDE, Arduino IDE, ESP-IDF, and Segger. - Communication Protocols: Proficient in USB, UART, I2C, SPI, I2S, RS232, and RS485, enabling reliable communication across embedded systems and connected devices. - Wireless & Connected Systems: Experience with BLE, BLE Mesh, ZigBee, UWB, LoRa, NB-IoT, 4G LTE, Wifi, WiFi Mesh, and NFC for IoT and wireless product development. - Sensor: light sensor, CO, Smoke Sensor, Dust Sensor, Air Sensor, pH sensor, IMU sensor, Accelero, Gyro sensor,... - UI/UX for Embedded: Figma, TouchGFX, LVGL for STM32, ESP32, Raspberry Pi. - Motors Control: BLDC, Stepper, Servo, DC Motors - Robotics: Expertise in ROS/ROS2 for applications like AGV, AMR, 6-axis robots. Some of my product that I have designed and released to the market: - Home IP Camera: SoC-based design with DDR3 RAM, Ethernet/Wi-Fi streaming, CMOS image sensor, IR LED array, IR-cut control, USB, and MicroSD - Smart Home Products: Home Gateway with Ethernet, Wi-Fi, Zigbee, and TFT LCD; Smart Switch with capacitive touch, Zigbee, power metering, and AC load control - Tablet Mainboard: RK3399-based board with DDR3, eMMC, touch screen, LTE. - Smart Water Meter: BLE/Wi-Fi design with TI MCU. - Wearable Devices: Low-power wearable designs with wireless connectivity, sensors, and battery management - High-Performance ESC for Drones: Real-time motor control design for efficient and stable drone operation - Custom SBC with AI Module: Raspberry Pi-based SBC solutions with integrated AI capabilities And a lot of other products. With our experience and expertise, I’m confident I can provide tailored solutions to help you complete your project and release your product to the market . I look forward to the opportunity to work with you.

I specialise in challenging go-to-market projects, designing and developing devices, circuits and software where the assumptions are yet to be tested and specifications are early phase. Over 20 years I have delivered deep tech programmes for the MOD, NHS and delivered into clients including Abbott, J&J, PALL, and Fujifilm. My training in sensors, electronic circuit design, biochemistry and embedded AI edge systems will guide rapid progress. My PhD focused on machine learning of receptor structures for biosensing applications, combining electronics design, computational modelling of biological systems, and sensor development. Clients often arrive with an early-phase concept, a market need, and a scope that is unclear. My first job is to identify which assumptions actually matter, design the experiments that test them, and produce a proof of concept with real evidence behind it. For teams past that point, I take that foundation through full hardware development to a compliant, market-ready device with all the certificates of conformity. I build first prototypes in-house using my own prototyping equipment, without the cost or lead times of an external build house. I design and review electronic circuits and schematics, lay out PCBs in Altium Designer and KiCad, develop embedded firmware in C and C++, design and prototype wearables from concept through to enclosure in SolidWorks, and prepare the regulatory evidence required for CE marking, UKCA, and EU MDR submissions.

I’m Avi Gupta, an electronics and PCB design expert with 11+ years of experience and 500+ boards designed for IoT, industrial, medical and consumer products. I help startups and product companies turn ideas into production-ready hardware using Altium Designer and other industry tools. ✅What you actually get when you work with me • Boards that are designed to pass EMI/EMC, not just “hope for the best” • Architecture and layout decisions that reduce respins and save months • Clear, production-ready documentation your manufacturer will thank you for ✅I’m most useful to you if: • You have a concept or early prototype (ESP32, STM32, or similar) and need it turned into a robust, production-ready Altium design. • You already have a board that “sort of” works and you’re worried about noise, reliability, thermal issues, or compliance. • You need an experienced hardware mind to own the electronics while your internal team focuses on firmware, apps, or business. ✅What I can help you with 1. New product hardware design (concept to production-ready PCB) • Architecture and block diagrams for your electronics (MCU, power, interfaces, connectivity) • Schematic design and capture in Altium Designer (or KiCad/Eagle on request) • Multilayer PCB layout with controlled impedance, length matching, and proper grounding • Design for manufacturability (DFM) so your CM can build and test boards smoothly 2. PCB review, cost-down and reliability upgrade Already have a design? I can: • Review your schematic and PCB layout for signal integrity, power integrity, and EMI/EMC risks • Reduce BOM and PCB cost (alternative components, better stack-up, optimized routing) • Improve thermal behavior and reliability for 24/7 operation in real environments • Help you move from “prototype that works on the bench” to “design that works in production” 3. Compliance-conscious, production-focused design • Design practices aligned with EMI/EMC, CE, UL and CISPR requirements • Grounding, filtering, shielding and layout strategies to avoid surprises in the test lab • Clean documentation: schematics, PCB files, Gerbers, fabrication/assembly outputs, PDFs, BOMs ✅Recent project highlights • Designed an ESP32-based LoRa IoT sensor node with RS485/Modbus interface for industrial monitoring. Created a 4-layer Altium PCB optimized for low power, robust EMC behavior, and easy enclosure integration. • Developed an STM32-based industrial controller board with isolated digital inputs/outputs, 24 V power domains, and RS485/CAN communication. The hardware was taken from concept to tested prototype and prepared for volume manufacturing. • Reviewed and cost-optimized an existing ESP32 control board, replacing hard-to-source parts, simplifying the power stage, and reducing BOM cost by ~25% while improving thermal margins and layout quality. • Designed a Raspberry Pi-compatible expansion HAT with LoRa communication, environmental sensing, relay output and RGB indication. Delivered complete Altium design, manufacturing files, and test guidance for small-batch production. • Created a high-voltage/power PCB with isolated gate drivers, current sensing, and careful creepage/clearance management. Layout was done with EMI/EMC and safety in mind to support future certification. ✅Tools, technologies and platforms • Primary CAD: Altium Designer (main tool for professional work) • Also experienced with: KiCad, Eagle, EasyEDA, Proteus • MCUs: ESP32, ESP8266, STM32, NXP, TI and similar 32-bit controllers • Interfaces: RS485, Modbus, CAN, Ethernet, SPI, I2C, UART, USB • Wireless: Wi-Fi, BLE, LoRa (module-based designs) • Applications: IoT devices, industrial controllers, sensor boards, data loggers, power electronics, battery-powered products ✅How I work • Hardware-first mindset: I focus on solid electronics architecture and PCB design; I can support basic firmware bring-up and collaborate closely with your firmware/software team. • Clear communication: upfront questions, regular updates, and intermediate design reviews so there are no surprises. • Production thinking: I design as if your board will go to manufacturing – even if you’re only building 5–10 units today. If you need a reliable hardware partner to design, review or optimize your PCB for a real product (not just a one-off hobby build), send me a message with a short description of your project, current status, and timeline. Let’s see how we can get your hardware ready for the field.

From concept to tested prototype, I design high-performance PCBs and embedded systems for startups, engineers, and product teams who need results that work the first time. With 8 years of experience in embedded systems and hardware design, I specialize in creating production-ready electronics that are efficient, reliable, and built for scale. Whether you're developing a new product or improving an existing design, I bring the technical expertise and problem-solving mindset to get it done right the first time. 💡 What I Offer: 🔹 Embedded System Development: ARM Cortex, STM32, ESP32 🔹 Advanced PCB Design: From 2-layer to complex multilayer boards with BGA, RF, and high-speed signals 🔹 Cost-Effective Engineering: Focused on value without compromising quality 🔹 Rapid Prototyping: Helping you move from idea to working prototype quickly 🔧 Core Technical Skills: ✔️ Analog & Power Circuit Design: LED drivers, SMPS, sensor interfacing ✔️ Motor Control & Drive Systems ✔️ Signal Integrity & EMC/EMI-Conscious Design ✔️ Communication Protocols: RS232, RS485, I2C, SPI, UART, CAN ✔️ Firmware Development: Embedded C/C++ for real-time applications 🛠️ Tools & Platforms I Work With: 👉 Altium Designer – Industry-standard PCB design 👉 LTspice – Analog simulation & validation 👉 Proteus – Embedded system simulation 👉 Signal integrity tools and EMI/EMC testing preparation 🚀 Why Work With Me? ✨ Proven record of delivering on time and exceeding expectations ✨ Strong communicator who makes complex things simple ✨ Practical experience with certification-ready hardware ✨ Affordable, efficient, and results-oriented 🎯 Let’s Build Something That Works Whether you're launching a new product, troubleshooting a design, or scaling to production, I’m ready to help bring your vision to life with solid engineering and dependable execution. 👉 Check out my work: github.com/zainsiddiqui-zz 📩 Let’s connect and build your next success.

💯 100% Job Success | 💲 $80K+ Earned | 70+ Projects Completed ✅ 10+ Years of Embedded Systems Experience ✅ Top Rated Freelancer on Upwork ✅ 100% Job Success Score ✅ $80K+ Earned | 2,600+ Hours Worked ✅ End-to-End Product Development Support ✅ Hardware + Firmware + IoT + Software Team Support I help startups, founders, and businesses design and develop reliable, cost-effective, and production-ready embedded products. My core expertise is in embedded hardware design, PCB design, and firmware development. Since 2013, I have worked on a wide range of products in industrial automation, IoT, wireless systems, energy products, smart devices, and consumer electronics. While hardware is my primary specialization, I also provide embedded software, mobile app, web dashboard, and backend development support through my team of engineers. This allows clients to work with one reliable partner for complete end-to-end product development. ✅ Why Clients Work With Me 10+ years of experience in embedded product development Strong expertise in hardware + firmware co-development Hands-on experience with production-ready PCB design Support from prototype stage to final product Clear communication and practical engineering approach Long-term project support and reliable execution ✅ Core Services Embedded hardware design Schematic design PCB design and layout Firmware development in C Board bring-up and debugging Wireless and IoT product development Prototype to production support Mobile and web applications for connected products ✅ Hardware & PCB Design Expertise 2-layer, 4-layer, and 6-layer PCB design Compact, low-cost, and manufacturable board design Analog and high-speed PCB design Hardware debugging and optimization Product redesign and cost optimization ✅ Embedded Systems & Firmware Expertise Worked with 8-bit, 16-bit, and 32-bit microcontrollers from: Texas Instruments Microchip / Atmel STMicroelectronics NXP Espressif Nordic Semiconductor Strong hands-on experience with: UART I2C SPI ADC / DAC RTC Timers MMC and related interfaces ✅ Wireless Technologies Bluetooth Low Energy (4.0 / 4.2 / 5) Wi-Fi Zigbee MiWi GSM (2G / 3G / 4G) GPS Sub-GHz RF ✅ End-to-End IoT Development Along with hardware and firmware, I also support complete IoT ecosystem development through my team, including: Android and iOS mobile apps Web dashboards Backend / server development Cloud-connected IoT systems ✅ Industries & Solutions I have worked on products related to: Industrial automation IoT and connected devices Smart agriculture Energy and power systems EV charging solutions Fuel / gas dispensing systems Consumer electronics Wireless embedded products Whether you need PCB design, embedded hardware, firmware development, wireless integration, or a complete IoT solution, I can help turn your idea into a reliable working product.

Hi, I'm David. I help turn complex electronic concepts into dependable, production-ready products. With over 5 years of practical experience, I support clients through the full development cycle, from initial design to functional prototypes and manufacturing handoff. My focus is on building efficient, scalable, and cost-conscious hardware systems that perform reliably in real-world conditions. 1. What I Deliver: Embedded Systems & Hardware Development - PCB Design & Hardware Engineering: Circuit design, multi-layer PCB layout, component selection, impedance tuning, compact design, and cost optimization. Emphasis on IPC standards, signal integrity, EMI/EMC mitigation, and thermal considerations. - High-Speed & Complex Systems: Hands-on work with DDR, HDMI, MIPI (CSI/DSI), PCIe Gen1/2, along with SoC and FPGA-based prototyping. - Embedded Platforms: STM32N6, STM32H7/STM32H5, STM32F7/STM32F1/F3/F4, ESP32/ESP8266, Nordic nRF52 series, ARM Cortex-A systems, Raspberry Pi (CM4/CM5), Zynq-7000. - Power & Mixed-Signal Design: Switching regulators (Buck, Boost, Flyback), LDOs, battery systems, motor control (BLDC, stepper, servo, DC), and analog/digital integration, PoE, LLC. - Manufacturing Readiness: BOM preparation, Gerber generation, and design adjustments to streamline production and reduce costs. - Tools: Altium Designer, KiCad, LTspice, Proteus, MATLAB/Simulink . 2. Firmware & Software Development - Programming: C, C++, Embedded C, Python (for automation and validation). - System Development: Linux-based platforms, MCU firmware, RTOS (FreeRTOS), power optimization, bootloaders, OTA updates, and debugging. - Connectivity & IoT: WiFi, BLE, LoRa, Zigbee, GSM/LTE/NB-IoT/5G, GPS, RFID, NFC. - Communication Interfaces: UART, I2C, SPI, I2S, RS232, RS485, CAN, Modbus RTU/TCP, USB, Ethernet. - User Interface: LVGL-driven GUIs, TFT/OLED displays, and touch interfaces. 3. Development Process & Collaboration - Product Lifecycle Support: Concept → prototyping → validation → production handover. - Workflow & Management: Organized development using Git, Jira, and structured documentation with clear milestones. - Global Collaboration: Experience working across US, EU, and Asia time zones with consistent communication. - Troubleshooting: Strong capability in diagnosing and resolving both hardware and firmware issues. 4. Why Choose Me? - Unified Skillset: Combined hardware and firmware capabilities help minimize back-and-forth and speed up delivery. - Practical Engineering Approach: Designs are built with real-world constraints in mind — not just theory. - Efficiency-Oriented: Focus on reducing unnecessary costs while maintaining performance and reliability. - Clear & Responsive Communication: Regular updates, well-documented progress, and quick feedback. Looking to bring your idea into a functional, well-engineered product? Feel free to reach out. I’d be glad to discuss your project !!!