Upwork home
Sign up
Secondary

Hire the best Computational Fluid Dynamics (CFD) Specialists in Egypt

Check out Computational Fluid Dynamics (CFD) Specialists in Egypt with the skills you need for your next job.
Get started
  • $40 hourly
    • 4.9/5
    • (326 jobs)
    Skilled Aeronautical & Mechatronics Engineer, versed in all aspects of Mechatronics modeling , design, and simulation. Contributes invaluable insights and vast experience to PCB problem-solving tasks and Code Troubleshooting. Experienced in Systems/Software design and programming. Talented at rapidly advancing through simulation and prototyping phases to generate revenue-producing assets. Able to provide assistance & consultation services in the following fields: 1 - Complex & High-Speed PCB Schematic Capture & Layout Design using Altium Designer 2 - Structural Finite Element Analysis & Computational Fluid Dynamics using Ansys & Abaqus Software packages 3 - Mechanical, Electrical & Electronic systems modeling & simulation using MATLAB/SIMULINK 4 - Problem Optimization Algorithms development using various algorithms such as Genetic Algorithm, ADAMSGD & Particle swarm 5 - Machine Learning & different Neural Networks architecture (MLP, Recurrent & Convolutional) design & programming.
    Featured Skill Computational Fluid Dynamics (CFD)
    Data Analysis
    Computational Fluid Dynamics
    Microcontroller Programming
    System Automation
    Simulink
    Control Engineering
    Topic Research
    MATLAB
    Engineering Simulation
    Structural Engineering
    C++
    Microsoft Word
    English
    Electrical Engineering
  • $40 hourly
    • 4.9/5
    • (56 jobs)
    Hello, I am a mechanical power engineer with a master's degree in optimizing the aerodynamic performance of Savonius wind turbine by CFD. I have 10 years of experience in performing different CFD cases using ANSYS Fluent and Solidworks, besides the 3D modelling by Solidworks. I'm working on 3 workstations: HP Z6 G4 = 2x Xeon Platinum 8160 (48 cores, 96 threads), RAM 768 GB HP Z840 = 2x Xeon E5-2699 v3 (36 cores, 72 threads), RAM 512 GB HP Z620 = 2x Xeon E5-2695 v2 (24 cores, 48 threads), RAM 96 GB It's also available to rent any of them with competitive prices. I contributed to publishing two papers as the first author with my professors: 1. "On the enhancement of Savonius Bach-type rotor performance by studying the optimum stator configuration" published in Ocean Engineering journal in September 2020. 2. "A Numerical Study of the Effect of Stator on Savonius Bach-Type Rotor Performance" published in ICFD13 conference in December 2018. I worked as a R&D Engineer in a part-time remote job for about 2 years with the Polish company Mateko in designing a new product. It was a portable air conditioner. I'm a reviewer in Ocean Engineering Journal (a Q1 journal). I'm preparing a course on Udemy about simulating the aerodynamic performance of different types of wind turbines by CFD. Thanks. Amr Emad
    Featured Skill Computational Fluid Dynamics (CFD)
    Technical Writing
    Computational Fluid Dynamics
    Aerodynamic Analysis
    3D Design
    Engineering Simulation
    LaTeX
    Stress Analysis
    CFD Analysis
    ANSYS
    Mechanical Engineering
    SolidWorks
    Autodesk AutoCAD
    3D Modeling
    Finite Element Analysis
  • $40 hourly
    • 4.8/5
    • (73 jobs)
    Previous Upwork Clients Feedback: 📌"Great work by Mahmoud, was extremely fast, knowledgeable, responsive and cooperative." 📌"for a complex simulation problem involving deep insights of Ansys and Fluent he is the right resource." 📌"A pleasure to work with - a committed contributor who brought about a critical transformation in the project solving a critical obstacle with visionary solution! Ever grateful!" 📌"Couldn't ask for a better experience, Mahmoud exceeded all expectations and was great in all areas (not only 5 star quality of work but communication and time management both excellent). Hi, thank you for your visit to my profile, here is a fast summary of who am I 😉: ✅A skilled and experienced engineering consultant with a strong background in Aerospace, mechanical and medical engineering, specializing in product design, testing and optimization. Equipped with extensive knowledge of aerospace and mechanical equipment, as well as a deep understanding of the physics and mathematics needed for complex system analysis. ✅Worked for various renowned companies worldwide, with a track record of delivering successful projects within budget and on time. Proficient in utilizing various advanced software, such as 3D design tools and simulation engineering, to optimize product performance according to client requirements. ✅Driven by a passion for innovation, I can help startups and established companies achieve their goals by providing expert consulting services for their projects.
    Featured Skill Computational Fluid Dynamics (CFD)
    Mechanical Engineering
    ANSYS
    Engineering Simulation
    Aeronautics
    Structural Analysis
    Finite Element Analysis
    Drone
    Product Development
    Aerospace Engineering
    Topology Optimization
    CAD & CAM Software
    Computational Fluid Dynamics
    Aerodynamic Analysis
    Generative Design
    Product Design
    Design for Manufacturing
    Autodesk Fusion 360
  • $30 hourly
    • 4.8/5
    • (37 jobs)
    Mechanical engineer with experience in Product development. I develop ideas to be a manufactured product. I solve Complex Engineering problems with my background as Engineer and my skills in Engineering Simulations, specially CFD. I'm experienced in several Manufacturing Techniques; Machining, moulding, Metal forming, etc.
    Featured Skill Computational Fluid Dynamics (CFD)
    MEP Design
    CFD Analysis
    Product Design
    Injection Mold Design
    Computational Fluid Dynamics
    HVAC System Design
    Industrial Design
    Manufacturing & Construction
    Prototyping
    Mechanical Design
    Manufacturing Engineering
    3D Printing
    Autodesk Fusion 360
    Design for Manufacturing
    ANSYS
  • $22 hourly
    • 5.0/5
    • (20 jobs)
    Looking for exceptional CAD services to bring your ideas to life? Look no further! With over +7 years of expertise in CAD operation, specializing in "SOLIDWORKS," I am the perfect choice for your project. My extensive experience includes designing, simulating, and manufacturing complex projects, along with proficiency in "CFD analysis" using "ANSYS" software. Beyond CAD, I excel in Robotics, Aerodynamics, Industrial design, and 3D printing. I offer a comprehensive range of services, including mechanical and machine design, robotics, detailing, 3D printing, prototyping support, stress analysis, CFD analysis, complex surfaces design, manufacturing engineering, 2D drawings, technical writing, rendering, sheet metals, and weldments. Rest assured, I can turn your ideas into reality with utmost speed, precision, and cost-effectiveness. Choose me as your CAD partner, and together, we'll bring your vision to fruition.
    Featured Skill Computational Fluid Dynamics (CFD)
    3D Rendering
    Industrial Design
    3D Design
    Animation
    Computational Fluid Dynamics
    ANSYS
    SolidWorks
    3D Modeling
    3D Printing
    CAD
    Mechanical Design
  • $15 hourly
    • 5.0/5
    • (11 jobs)
    I'm a Project Management Professional with a rich background in Engineering, R&D, Digital Marketing, Customer Service, start-up building, and other domains. Leveraging my diverse experience and great passion, I bring a unique blend of technical expertise, creative insight, and managerial finesse to every project I undertake. I help teams turn ideas into action by bridging communication between clients, talent, and tech teams, making sure projects move forward smoothly. I’m skilled in organizing tasks, keeping everyone focused on priorities, and removing any roadblocks that come up. I’ve developed efficient workflows and documented processes to help businesses grow, often collaborating on big-picture strategies and finding ways to improve operations. I’m also experienced in matching the right talent to the right roles, streamlining communication, and even applying AI tools to optimize our work. My experience with social media algorithms gave me a unique understanding of how people respond to brands and content, helping me bring a fresh perspective to project and team management. 💻🖱 Key Skills: - Google Project Management Certification - ClickUp Advanced Level - AirTable, Asana, Trello, Slack, Microsoft Project - MS Suite, Google Suite, Prezi - Project Initiation, Planning, Execution - Agile Project Management, Scrum - Team Leadership and Building ✍ What I will be offering: - Efficient, Agile project management - Clear, streamlined team communication - Quick problem-solving and roadblock removal - Optimized processes for growth - Strategic talent matching and alignment Most importantly, I'll offer my absolute dedication and passion in helping people and teams achieve their goals and fulfill their potential. • As a writer, I'm a certified Game Critic as I have created numerous articles for both entertainment and education purposes. Most of those articles are top search results on Google. • I'm always trying to adapt and learn new things, accepting new challenges is just a normal behavior for me as I'm a quick learner who seeks knowledge and new experiences.
    Featured Skill Computational Fluid Dynamics (CFD)
    Autodesk AutoCAD
    SolidWorks
    Computational Fluid Dynamics
    Writing
    ANSYS
    Embedded System
    3D Modeling
    English to Arabic Translation
    Article Writing
    Creative Writing
    Document Review
    Content Writing
    Article
    English
  • $30 hourly
    • 5.0/5
    • (10 jobs)
    I’m a Top Rated Mechanical Engineer with specialized expertise in Computational Fluid Dynamics (CFD) and HVAC system simulation and design. I help clients turn complex thermal and flow challenges into accurate, actionable solutions. 🔬 CFD Expertise: Simulation using Ansys Fluent, CFX, and OpenFOAM Heat transfer, turbulence, and multiphase flow analysis Mesh generation with Ansys Meshing and TurboGrid Applications in pumps, compressors, heat exchangers, and energy systems I have experience in open channel and gravity pipeline modeling using software such as HEC-RAS, WaterCAD, SewerCAD, and SewerGEMS 🌬️ HVAC Skills: Load calculations and duct sizing based on ASHRAE standards Indoor airflow and ventilation analysis Thermal comfort modeling using CFD tools and much more .... Energy-efficient HVAC system optimization
    Featured Skill Computational Fluid Dynamics (CFD)
    COMSOL Multiphysics
    Aerodynamic Analysis
    HEC-RAS
    OpenFOAM
    Teaching
    Mechanical Design
    Finite Element Analysis
    Mechanical Engineering
    SolidWorks
    CAD
    Microsoft Excel
    Fluent
    Computational Fluid Dynamics
    ANSYS
    CFD Analysis
  • $6 hourly
    • 5.0/5
    • (3 jobs)
    I'm an Expert Customer Service Specialist and a translator from/to the following languages: Arabic, English, and Turkish. I have more than 5 years of experience in the customer service, technical services, and presales field. I have been working for major companies such as Vodafone-UK, Teleperformance, Hekka, Gearbest, Zaful, Dresslily, Rosgal, Freya, Osmo, and Suunto. During these years, I am confident in my skills. I earned a lot on my communication skills and developed them to be a senior assistant in the field since, I can certainly work on handling emails, live chat, and phone calls. This is because I got the experience needed to use Crisp, Slack, and several other CRMs such as Freshdesk, Helpdesk, Zendesk, Gorgias, and Salesforce. Besides, I've worked on different types of ERPs including (WOS, OMS, SMS, Mabang, and Mangguo). I prioritize CX as I believe that it is one of the pillars that makes a successful business. I provide my service to those who are looking for integrity, honesty, and getting things done. Thank you for viewing my profile. Ragab
    Featured Skill Computational Fluid Dynamics (CFD)
    Statics
    JavaScript
    CFD Analysis
    SolidWorks
    CAD
    Autodesk 3ds Max
    Mechanical Design
    Computational Fluid Dynamics
    Ticketing System
    Customer Support
    Customer Retention
    Gorgias
    Slack
    HTML
    Shopify
    CSS
    Order Tracking
    Online Chat Support
    Zendesk
  • $25 hourly
    • 4.7/5
    • (8 jobs)
    Ahmed Ibrahim Senior Mechanical Design Engineer | Product Design | Subsea Vehicles & Tools | Green Technology Solutions| Thermal Management. I am a highly skilled Mechanical Engineer specializing in innovative product design, 3D CAD modeling, manufacturing processes, and engineering simulations. I thrive in creating functional, cost-effective designs, particularly in high-performance applications across a wide range of industries, including subsea engineering, green technologies, and medical devices. Educational Background: Master’s Degree in Mechanical Engineering, Assiut University Specialized in Turbomachinery, Heat Transfer, Fluid Mechanics, and Gas Turbine Film Cooling. Areas of Expertise: ✅ Product Design and Concept Development across various industries ✅ 3D CAD Modeling for Prototyping and Manufacturing ✅ Design for Manufacturing and Assembly (DFMA) for Cost-Effective Production ✅ Thermal Management, Heat Transfer, Fluid Mechanics, and Turbomachinery Design ✅ Subsea Vehicles and Tools Design for Harsh Environments ✅ Engineering Simulations using CFD, FEA, and Rigid Body Motion Analysis ✅ Manufacturing Processes including CNC Machining, Injection Molding, 3D Printing, and Sheet Metal Fabrication ✅ Medical Devices and Implant Design, including Orthopedic and Craniomaxillofacial Plates ✅ Die and Mold Design for Various Products Work Experience: Senior Mechanical Design Engineer | MCS Oil Currently working as a Senior Mechanical Design Engineer at MCS Oil, where I lead the design and development of subsea vehicles and tools, focusing on the harsh environments of underwater operations. My role involves designing high-performance, reliable systems and components, ensuring they meet stringent safety and operational requirements. Project Engineer, R&D | Obrien Tech Limited (Hong Kong SAR) Contributed to the development of green technology solutions, including the design of small-scale wind turbines for urban applications, aligning with sustainability goals. Project Engineer | Brainchild Engineering Specialized in high-performance mechanical and electro-mechanical product development, working on new product designs and innovations for various industries. Research Assistant | Gas Turbine Laboratory, Assiut University Conducted cutting-edge research in gas turbine performance, focusing on the aerodynamic and thermal behavior of turbine blades and vanes. Sample of Projects: Film Cooling and Aerodynamic Performance Investigations of Gas Turbine Engines Vanes and Blades (Scientific Research Project) Design of Portable Infant Incubators and Maxillofacial Bone Plates Design of Permanent Copper Casting Molds for Water Tap Mixers Design of Copper Press Dies for Water Valves Design of Multiple Spare Parts for Production Lines in Manufacturing Facilities Design of an Automated Sports Assistant Device Design of an Innovative Dumbbell for Enhancing Walking Experience Key Skills and Tools: - SolidWorks, Autodesk Fusion 360, Onshape - ANSYS Fluent, Qblade, Tecplot - DFM, DFA, GD&T, Design Thinking, Systematic Product Design - CFD, CAE, Mold Design, Plastic Injection Molding - 3D Modeling, 3D Printing, PCB Enclosure Design - Medical Implant Design, 2D to 3D Conversion, CAD Drafting - Problem Solving, Product Optimization, Engineering Simulations
    Featured Skill Computational Fluid Dynamics (CFD)
    COMSOL Multiphysics
    ANSYS
    3D Rendering
    Onshape
    Computational Fluid Dynamics
    Injection Mold Design
    Mechanical Design
    Product Design
    Reverse Engineering
    3D Printing
    Mechanical Engineering
    Product Development
    SolidWorks
    3D Modeling
    Autodesk Fusion 360
  • $35 hourly
    • 5.0/5
    • (90 jobs)
    Upwork Top Rated Plus • 100+ Happy Clients, • 50+ Launched Products,• 4,000+ Hours on Onshape CAD Software • Full-Time Dedication to Upwork Clients About Me: I specialize in transforming clients' ideas into tangible products through the art of mechanical design. My expertise spans a wide range of products, from shower filters to huge inline heaters. Using analytical calculations and simulation tools, I ensure that prototypes work flawlessly from the first iteration. Education: • BSc in Mechanical Engineering from Alexandria University, 2010 • MSC in Mechanical Engineering (Heat Transfer) from Alexandria University, 2019 Experience: With over Seven years as a full-time remote product designer engineer, I have a wealth of experience in design for manufacturing across various processes including plastic injection molding, thermoforming, CNC machining, sheet metal, and rapid prototyping tools such as 3D printing. Skills: • CAD Software: Onshape (primary), Fusion360 • FEA (Finite Element Analysis): Test designs under loading conditions and optimize materials. • CFD Simulation: For fluid and heat transfer cases like blower heatsink electronic cooling. • Manufacturing Methods: Injection molding, blow molding, sheet metal, CNC machining, casting, tube bending, welding, plastic ultrasonic welding, stamping, vacuum brazing, extrusion. • Shop Drawings: Professional drawings with tolerances, clearances, hole lists, cut lists, welding symbols, full BOM, exploded views, and detailed views. Notable Projects: 1. Swimming Pool Filters 2. Shower Filter (available on Market) 3. Handheld Shower (available on Market) 4. PDU for Data Centers (sheet metal and wiring) 5. Heavy Speakers Mounting Brackets (sheet metal and FEA analysis) 6. Ticking Pole(available on Market) 7. C-Arm for X-ray (metal frame FEA analysis) 8. Smart Water Bottle 9. Heatsink 10. Phase Change Thermal Battery 11. 4D Game Simulator 12. Foldable Fan 13. Surgical Tool 14. Children's Tooth Station 15. Camera Base Lock 16. Aluminum Windows Thermal Break (including calculations for Uf and Uw) And More … What I Offer: I bring products from hand sketches to market-ready designs, with a focus on optimizing tooling costs for mass production. I also offer 3D printing services to prototype and test parts. Let's Connect: I am ready to sign an NDA and discuss your project in a free call, providing you with a rough estimation and a detailed working plan.
    Featured Skill Computational Fluid Dynamics (CFD)
    Sheet Metal
    Computational Fluid Dynamics
    Onshape
    Injection Mold Design
    Surface Modeling
    Mechanical Design
    Mechanical Engineering
    Manufacturing & Construction
    Autodesk Fusion 360
    SolidWorks
    Design for Manufacturing
    Finite Element Analysis
  • $40 hourly
    • 5.0/5
    • (55 jobs)
    I am a micro and nano electronics, VLSI and MEMS engineer. I am currently working at the CNT at Zewail city of science and technology. I have solid knowledge and background in the fields of micro and nano electronics and micro systems engineering. Skills: • Verilog/VHDL and Test Benches. • VLSI digital and analog electronic circuits, starting from transistor level to high abstraction levels such as ASIC and FPGAs. • Micro-Electro-Mechanical Systems (MEMS) design and simulations. • Microfabrication Techniques (Cleanroom hands-on experience with full lab credit hour). • Simulations: ModelSim and Testbenches - Synopsys Design Compiler - Cadence Virtuoso - COMSOL MultiPhysics - Sentaurus - SProcess . • Programming: MATLAB - C/C++ - python - Verilog - system Verilog - VHDL. • Cadence and Synopsys custom compiler Layout. • Scientific Research and Writing. experience: 1- As part of the Analog layout automation graduation project team, I wrote the C++ code for generating guard ring, Bulk ties and power connections for the automated current mirror design. 2- Designed a LNA from scratch using cadence software and performed pre and post layout analysis. 3- Performed full ASIC design process using Synopsys DC compiler. 4- Designed a mask design for micro tweezer using CleWin software. 5- Implemented EDA algorithms to perform partitioning, floor planning and timing analysis using C++. 6- Designed an amplifier with a band gap circuit using Cadence software and performed pre and post layout analysis. 7- Designed a 5-stages 6-bit digitally controlled ring oscillator using Cadence software and performed pre and post layout analysis. 8- Participated in designing face detection embedded system using raspberry pi in python programming language. 9- Participated in designing Maze solver game using C++. 10- Designed and studied the properties of a photonic crystal fiber using Comsol simulations. 11- Participated in Coding 180nm CMOS Not gate using Sentaurus.
    Featured Skill Computational Fluid Dynamics (CFD)
    CAD
    Prototyping
    Computational Fluid Dynamics
    MATLAB Script
    Circuit Design
    3D Modeling
    Digital Electronics
    SystemVerilog
    VLSI
    Analog Electronics
    Cadence Platform
    CFD Analysis
    C++
    COMSOL Multiphysics
  • $30 hourly
    • 5.0/5
    • (3 jobs)
    Mechanical Engineer with a history of working in the industrial automation industry. Skilled in Numerical Simulation, Coaching, Teaching English as a Foreign Language, SolidWorks, and ANSYS. Strong engineering professional with a Bachelor's degree focused in Mechanical Engineering from Alexandria University.
    Featured Skill Computational Fluid Dynamics (CFD)
    Hydraulic Engineering
    Research & Development
    Computational Fluid Dynamics
    Topology Optimization
    Mechanical Design
    CAD
    Design for Manufacturing
    Finite Element Analysis
    ANSYS
    HVAC System Design
    CFD Analysis
    SolidWorks
    3D Printing
    MATLAB
  • $15 hourly
    • 5.0/5
    • (7 jobs)
    I am hydraulics engineer specialized in civil and mechanical engineering expertise in thermal and hydraulic CFD simulation. I have a great experience in open channel flow applications, rotary machines and solar energy. (i.e., Water turbines, energy harvesting, low-head hydropowr, renewable energy, energy dissipation, scour protection, outlet flow, hydraulic calculations) I've conducted several CFD models regarding civil and mechincal applications in topics stated above. I have an over then 5 years of experience in heat transfer applications using Ansys Fluent software, including enhancing internal flow heat transfer, heat exchanger performance, vortex generators, heat sink, fins, flow over tubes… etc. In addition to an experience on renewable energy field: • Design of PV solar systems using SAM, PVSol, and PVsys. • Design of wind turbine power plants using WASP and WindPRO software.
    Featured Skill Computational Fluid Dynamics (CFD)
    Solar Energy
    Civil Engineering
    Solar Energy Simulation
    Computational Fluid Dynamics
    CAD Drafting
    Presentations
    Report
    Water
    Flow Simulation
    Hydraulic Simulation
    Mechanical Engineering
    SolidWorks
    ANSYS
    Autodesk AutoCAD
    CFD Analysis
  • $30 hourly
    • 5.0/5
    • (2 jobs)
    CFD Engineer | Certified SolidWorks Expert | Formula Student Alumnus A passionate engineer with hands-on experience in CFD, FEA, and advanced 3D design. As a key member of a Formula Student team, I specialized in optimizing vehicle aerodynamics, mass reduction, and cost-performance balance. Certified in SolidWorks Mechanical Design, I excel in Part Design, Surface, Assembly, Weldments, and Sheet Metal. My proficiency extends to technical documentation, including professional drawings, BOMs, and rendering. With a strong foundation in cost and mass optimization, I aim to deliver innovative, efficient, and sustainable engineering solutions.
    Featured Skill Computational Fluid Dynamics (CFD)
    Cost Estimate
    Microsoft Excel
    3D Design
    Computational Fluid Dynamics
    Mechanical Design
    CFD Analysis
    ANSYS
    CATIA
    Finite Element Analysis
    MATLAB
    Mechanical Engineering
    3D Printing
    SolidWorks
    Reverse Engineering
  • $25 hourly
    • 4.7/5
    • (4 jobs)
    I'm a CFD Engineer, with a strong fluid mechanics, heat transfer, and numerical methods background, and a thorough understanding of turbulence modeling. Experienced and skilled in different CFD analysis types using OpenFoam including aerodynamics, multiphase flows, CHT, and FSI analyses. Also high-level CFD code development within the OpenFoam environment. Currently pursuing an M.Sc. degree in mechanical engineering (Fluids)
    Featured Skill Computational Fluid Dynamics (CFD)
    OpenFOAM
    Computational Fluid Dynamics
    CAE
    CFD Analysis
  • $50 hourly
    • 0.0/5
    • (0 jobs)
    I'm a mechanical designer experienced in designing and analyst projects for race cars same as formula student cars working by electrical powertrain and shell eco marathon to make car friendly to Eco system with focused on minimized weight by material study to make balance between performance and cost analysis. Whether you’re trying to win work, list your services, or make your ideal in real life, I can help. - Knows SolidWorks, Ansys, Optimum Kinematics, AutoCAD, and Adobe Illustrator - Full project management from start to finish -Regular communication is important to me, so let’s keep in touch.
    Featured Skill Computational Fluid Dynamics (CFD)
    Creative Strategy
    Business Analysis
    Cost Analysis
    ANSYS
    SolidWorks
    Thermodynamics
    Management Skills
    Stress Management
    Stress Analysis
    Time Management
    Leadership Skills
    Mechanical Engineering
    Mechanical Design
    Computational Fluid Dynamics
    CFD Analysis
  • $25 hourly
    • 4.9/5
    • (47 jobs)
    Need a 3D work with very good quality or any work related to naval architecture? I'm glad to provide you with the solution. My experience in 3D work and naval architecture field is ready to serve your business. Key facts: • Running pleasure vessels and working vessels designed by me. • 3D work in marine or interior designs with 3D Rhino and MAYA - Over 8 years. So who I am ? I am A naval architect since 2007 and 3D modeler since 2003 , I can use 3D rhino, AutoCad, 3D Maya , 3D MAX , Photoshop and anther design programs for model and render. also I can do structure analysis work and ship stability calculation an all calculations regarding to ship design. I graduated from Alexandria university , in Marine engineering and Naval Architecture department, and during my education i go to learn 3D programs such as MAYA and 3D Max. I did a lot of 3D work specially in marine field and construction field. I have a lot of Ideas that you will like and i am very fast in my work.
    Featured Skill Computational Fluid Dynamics (CFD)
    Finite Element Analysis
    Rhinoceros 3D
    Autodesk Maya
    Naval Engineering
    Structural Engineering
    ANSYS
    Engineering Design
    Computational Fluid Dynamics
    Mechanical Engineering
    Autodesk AutoCAD
  • $25 hourly
    • 5.0/5
    • (5 jobs)
    Naval Architect with over four years of experience in boat building and systems. I could provide you the following: - 3D modeling of the ship hull - 3D modeling of the ship construction - 3D modeling of the piping lines - Ship construction calculation (Scantling) (Steel/Aluminum/Fiber) - Producing ship nesting drawings - Producing units and blocks assembly booklet - Pipe liens layout drawings and systems operation curves - Requested class design drawings - Hydrostatics booklet - Calculating the ship Bollard pull - Calculation of ship hull resistance -Propulsion efficiency and selection Please reach me anytime My best regards. Special design * Structural Design of Floating docks * Structural design of pontoons Maxsurf, Rhino, AutoCad3D, Ansys Structure, Ansys CFX , ICEM Mesh
    Featured Skill Computational Fluid Dynamics (CFD)
    Engineering Design
    Rhinoceros 3D
    Naval Engineering
    Finite Element Analysis
    ANSYS
    Mesh Fabric
    Computational Fluid Dynamics
    CAD
    SolidWorks
    3D Modeling
    Autodesk AutoCAD
  • $25 hourly
    • 3.3/5
    • (2 jobs)
    Hello and welcome! I am an accomplished Electromechanical Engineer with a degree from Alexandria University (July 2022). My professional journey has been diverse, covering projects in automotive, robotics, construction as well as various other industries. Skills and Specialization: Specializing in precise mechanical design, I seamlessly integrate with electrical designs, providing a comprehensive approach to projects. My experience allows me to tackle challenges with ease, offering not just technical solutions but also market-oriented insights. Project Range: I am adaptable to both short-term projects and long-term partnerships. My commitment to continuous learning ensures I stay at the forefront of industry advancements, delivering cutting-edge solutions to my clients. Why Choose Me: - Multidisciplinary Expertise: My background spans various industries, giving me a unique perspective that benefits projects in different domains. - Comprehensive Design: I excel in precise mechanical design and ensure seamless integration with electrical components for a holistic approach. - Problem-solving: Thriving on challenges, I bring a proactive approach to finding solutions, ensuring project success. - Flexible Collaboration: Whether you have a short-term project or seek a long-term partnership, I am adaptable and committed to exceeding your expectations. Let's Collaborate: I am eager to collaborate with you and turn your concepts into outstanding designs. Feel free to reach out, and let's discuss how we can achieve your project goals together.
    Featured Skill Computational Fluid Dynamics (CFD)
    3D Printing
    Computational Fluid Dynamics
    CSS
    Design Writing
    Product Development
    Web Development
    Product Design
    HTML
    JavaScript
    SolidWorks
    Autodesk AutoCAD
    3D Modeling
    3D Design
  • $8 hourly
    • 3.3/5
    • (5 jobs)
    i am a mechatronics engineer experienced in python and its libraries and have been in the machine learning study for a year and i have been in some projects of data analysis. i also am professional in autodesk inventor and have been in many projects. i have also made some projects making an industrial conveyor system controlled by microcontrollers . in addition to that i have quiet good foundation in PLC and industrial automation which is my major.
    Featured Skill Computational Fluid Dynamics (CFD)
    Computational Fluid Dynamics
    Arduino Firmware
    Python Script
    Autodesk
    Mechatronics
    Arduino
    C
    Simulink
    Autodesk Inventor
    ANSYS
    Mechanical Design
    MATLAB
    Computer Vision
    Python
    C++
  • $20 hourly
    • 0.0/5
    • (0 jobs)
    I am an undergraduate mechanical power engineer. I am a skilled CFD engineer with three years of experience. I am an expert in the fields of multi-phase flows, fluid dynamics, and rotating machines. I have a high quality of knowledge in the simulation field, especially in ANSYS Fluent. I am a CFD and ANSYS instructor. Services that I can provide,     - Mechanical design using SOLIDWORKS,     - Fluid flow simulation using ANSYS Fluent (Fluid dynamics, Multi-phase flows, Heat & Mass transfer, Rotating equipment),     - Product design, optimisation, and innovation. I have the most experience in the following fields of engineering: - Computational fluid dynamics (CFD) Analysis, - Numerical solutions, - Working with multi-phase flows, phase-change materials, heat & mass transfer, aerodynamic systems and gas dynamics ,  - HVAC analysis with ANSYS Fluent. If you have any problems, I am here to find a solution.
    Featured Skill Computational Fluid Dynamics (CFD)
    Mechanical Design
    SolidWorks
    ANSYS
    Aerodynamic Analysis
    Computational Fluid Dynamics
    Mechanical Engineering
    CFD Analysis
  • $25 hourly
    • 0.0/5
    • (0 jobs)
    I have wide experience in running RANS turbulence models for single-phase flow and two-phase flow employing porous media models, Eulerian multiphase models, and VOF multiphase models at ANSYS FLUENT software. I also practiced and generated several user-defined functions. I can also generate structured mesh for complicated structures, such as wire mesh packing, using ICEM software, and I also have some background in Open FOAM software. I have deep experience performing codes in MATLAB/m-file, such as writing numerical models and doing data processing for CFD results. I also have some experience in machine learning using ANN.
    Featured Skill Computational Fluid Dynamics (CFD)
    Artificial Neural Network
    Problem Solving
    Numerical Analysis
    Numerical Computing Software
    C++
    MATLAB Script
    Fluent
    ANSYS
    CFD Analysis
    Computational Fluid Dynamics
  • $40 hourly
    • 3.9/5
    • (4 jobs)
    My ultimate goal is to provide you with full solution and engineering resources to make your idea a reality and ready for appropriate manufacturing process In my design house company, I learned how to design, analysis, manufacture and manage mega projects like  100 kw micro gas turbine  marine pod drive  diesel dual turbocharge modification  design and manufacturing marine heat exchangers, aftercoolers, sea water strainers and hydro cyclones  design and manufacturing of NEV car  Design of small electric passenger car Over the last 12 years I have gained extensive knowledge and experience in all aspects from initial design until different manufacturing phases. Some of the services presented:  mechanical design engineering  turbomachinery design  CAD, drafting and parts assembly  gearbox design  surface modeling  reverse engineering  flow simulation  stress analysis FE  sheet metal design  heat exchanger design
    Featured Skill Computational Fluid Dynamics (CFD)
    Siemens NX
    Computational Fluid Dynamics
    ANSYS
    Drafting
    Finite Element Analysis
    SolidWorks
    3D Modeling
    3D Design
    3D Rendering
    CATIA
  • $15 hourly
    • 5.0/5
    • (2 jobs)
    **Looking for a Certified Multi-Skilled Professional to get your job done perfectly? You've come to the right place.** I'm Mohamad, a Mechanical Design and Production Engineer with over 8 years of experience. The owner of TheSolidWorksExpert.com (TSWE). I am a Certified SolidWorks Mechanical Design Expert and a Certified SolidWorks Additive Manufacturing Associate. Additionally, I am a Certified SolidWorks Professional in: - Simulation (FEA) - Advanced Surfacing - Advanced Sheet Metal - Advanced Mold Tools - Advanced Weldments - Advanced Drawing Tools I have a proven track record of helping companies in North America and Europe develop and launch new products, as well as upgrade existing ones. I am passionate about assisting startups and new companies in achieving their goals through scientifically sound and practical approaches to product development. ### Core Skills and Experience: - **Mechanical Systems,Elements and Machine Design** - **Design of Collapsible and Movable Mechanisms** - **Steering, Suspension, and Chassis Systems** - **Gear Train Design** - **Automation and Mechanism Design** - **Material Selection and Stress Analysis** - **Design for Manufacturing (DFM) and Assembly (DFA)** - **FEA and CFD Simulations** - **Reverse Engineering** - **High-quality 3D Renderings and Animations** using SolidWorks Visualize Professional and KeyShot I deliver high-quality, realistic 3D renderings and animations essential for branding and growth, utilizing the latest hardware and software. If you're looking for a dedicated, multi-skilled professional to bring your project to life, let's get started.
    Featured Skill Computational Fluid Dynamics (CFD)
    Concept Design
    CAM Software
    Computational Fluid Dynamics
    3D Product Rendering
    3D Animation
    3D Printing
    Rendering
    Design Simulation
    Engineering Simulation
    CAD
    Geomagic Design X
    Finite Element Analysis
    Mechanical Engineering
    Reverse Engineering
    Mechanical Design
    3D Modeling
    SolidWorks
    3D Rendering
  • $25 hourly
    • 0.0/5
    • (2 jobs)
    I'm a mechanical power engineer who works in aviation while doing my masters in hydraulic turbines. I use ansys fluent as a CFD program and use Autocad and SolidWorks to draw my models. I have a good experience with windows operating system and Ms Office package . I have also a good experience with Adobe Photoshop
    Featured Skill Computational Fluid Dynamics (CFD)
    Computational Fluid Dynamics
    Microsoft Office
    English
    Writing
    Arabic
    Russian
    Adobe Photoshop
  • $10 hourly
    • 5.0/5
    • (1 job)
    Let's Make Something Cool I'am a senior Aerospace engineering student and I have been working as freelancer for 3 years. Finishing projects in perfect, precise and professional way is my target. During my study I worked on many aerospace fields, ex: Aeronautical Engineering (Drones, UAVs), Mechanical Engineering, Robotics, Design, Simulation, Manufacturing. Im expert in the following programs and I used to teach it in seminars and crash courses: SolidWorks, CATIA, ANSYS, Matlab. I have a lot of experience in fabrication techniques: Sheet metals, machining, 3d-printing, laser cutting, molding and composites (fiberglass, carbon fiber) productions. Ahmad Nashaat
    Featured Skill Computational Fluid Dynamics (CFD)
    Drafting
    ANSYS
    English
    Drone
    Mechanical Engineering
    Computational Fluid Dynamics
    Mechanical Design
    Product Design
    CATIA
    SolidWorks
  • $15 hourly
    • 5.0/5
    • (2 jobs)
    Hello there, Thanks for reaching my portfolio. I'm a Mechanical Engineer, a Product Designer and a Certified Solidworks Professional with more than 3 years of Experience in Freelancing. In my designs, I work considering all designs aspects ( manufacturing, Stress Analysis, Low cost in prototyping, Efficiency, etc... ), I can work on variable projects from everyday-use gadgets (Coffee Machines, Pocket Tools, etc...) to industrial products. I have a high experience in Solidworks, Solidworks Visualize, Ansys, Matlab, Fusion 360, MS Word, MS Excel and MS Power Point. I am always available for clients willing to get their work done efficiently considering Mechanical, Aerodynamic, hydraulic and thermal aspects.
    Featured Skill Computational Fluid Dynamics (CFD)
    Technical Writing
    Academic Writing
    English to Arabic Translation
    Structural Analysis
    Computational Fluid Dynamics
    MATLAB Script
    Finite Element Analysis
    Mechanical Design
    CAD
    2D Design
    3D Design
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Top cities for Computational Fluid Dynamics (CFD) Specialists in Egypt
Show more