Hire the best Electrical Consulting Engineers in Arizona

Check out Electrical Consulting Engineers in Arizona with the skills you need for your next job.
  • $80 hourly
    Rapid system prototyping with off the shelf prototyping boards can be accomplished in a short period of time. Having a diverse background in embedded development and IoT, I can provide services based on years of experience with embedded systems in harsh user environments (bus transportation industry, cell phones, hobby grade R/C vehicles, sensors, and medical devices). I am familiar and have used prototyping and breakout boards from many companies including Arduino, Adafruit, Raytac, Microchip, Sparkfun, Nordic nRF52 product line, Digi XBEE3 Cellular, Bosch (IMU), and others. When necessary, custom prototyping PCBs are created with PCB CAD tools. More than three years as lead engineer implementing both hardware and firmware of cellular NB/IoT systems using Digi XBEE3 technology resulted in launch of more than 100 systems now active in the bus transportation industry. Technologies in the product use solar charging, lithium iron batteries, low power implementation, MicroPython programming, watch dog timing, Bluetooth LE control, smart battery management, cellular NB/IoT, and much more. I have excellent knowledge and experience in Software Development Life Cycle (SDLC) and Agile Methodologies. I am flexible to project demands and shifting technologies and requirements. Having a diverse background in embedded development, I can provide services based on years of experience with embedded systems in harsh user environments (cell phones, hobby grade R/C vehicles, sensors, and medical devices). Embedded technologies include concurrent use of pulse width modulation (PWM), analog to digital converters (ADC), digital to analog converters (DAC), Bluetooth LE (BLE), collection algorithms, control algorithms, motion sensing, temperature sensors, light sensors, and much more. - PCB Design Tools Altium Designer, Eagle CAD, KiCAD, OrCAD - Microcontroller STM32, nRF52832, nRF52840, iMX6/iMX8...
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Python
    Embedded C
    Microcontroller
    Bluetooth
    Electronics
    Internet of Things
    Circuit Design
    FPGA
    Raspberry Pi
    Arduino
    Altium Designer
    Embedded System
    Firmware
    PCB Design
  • $35 hourly
    I graduated from an accredited university with a bachelor's degree in electrical engineering with a GPA of 3.65. Since that point I now have over 10 years experience in various fields of engineering ranging from electric drives to security systems. My primary focus has been with embedded systems and PCB design. I have used numerous controllers in past designs however the most popular with my clients has been the arduino and various versions of it. Also the teensy has been a popular choice lately. I use Eagle Cad to design PCB's and can design up to four layers although two layers will suffice for most projects. I also have have experience with various IOT modules such as the laird bl652, esp8266, and the particle. If you have any questions please contact me.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Microcontroller
    Circuit Design
    Hardware Design
    Assembly Language
    Prototyping
    Eagle
    Atmel AVR
    Software Development
    3D Design
    PCB Design
    Arduino
    Embedded System
    Electronic Design
    Microcontroller Programming
  • $50 hourly
    Electrical Engineer with over nine years of experience designing and optimization of PV + Storage grid-tied and standalone systems. Skilled with industry-standard software like PVSyst, Helioscope, Aurora, AutoCAD, Energytoolbase, and PVWatts. At Sunrun, I have led the design on as many as 1000+ projects in a year summing to over 4 MW of installed capacity over 12 different states in the USA. I add value to my team by understanding the fundamentals of solar resources, the design process, and the issues that can arise in construction and combining that knowledge with cross-process automation. I consider myself to have good communication skills working with estimating, procurement, project management, EOR, and construction teams to bring projects to the finish line as problems arise and maximize the effectiveness of our team's process developments.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Sustainable Energy
    PV Sizing
    Solar Energy
    PV System Design
    Energy Storage
    Solar Design
    Electrical Drawing
    Electrical Design
    Solar Energy Simulation
    Residential Design
    PVSyst
    National Electrical Code
    Helioscope
    CAD
  • $60 hourly
    I am a spreadsheet developer and coach with over 20 years of experience using Microsoft Excel in the professional environment. I have developed spreadsheets with VBA for companies like Samsung, Intel, ASM, and more. My work ranges from spreadsheets used by small business, such as quotes and invoices, to spreadsheets used in manufacturing environments, such as process control records and performance charts. I can provide a polished and powerful solution to your problem.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Microsoft Office
    Data Analysis
    Failure Analysis
    Statistical Process Control
    Process Flow Diagram
    Continuous Improvement
    Statistics
    Failure Mode & Effects Analysis
    JMP
    Reverse Engineering
    Visual Basic
    Visual Basic for Applications
  • $40 hourly
    Electrical Engineer with experience in controls, panel building and design according to UL508A (Certified MTR), Switchgear building, design and testing according to UL891, Programming, Troubleshooting. I consider myself to be a fast learner thanks to my experience in different fields and my interest in learning new skills.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Troubleshooting
    Robotics
    Technical Documentation
    Control Engineering
    PLC Programming
    CAD
    Power Distribution
  • $75 hourly
    👋 Hello there! I'm Kevin Brown, a versatile engineer with expertise in mechanical, electrical, and software domains. Let's dive in! 🎓 Background: With a Mechanical Engineering degree, I've blended expertise in electronic design, firmware, and mechatronics. I streamline processes, automate testing, and design innovative solutions. 🛠️ Skills: - Mechanical Excellence: From mechatronics to fixture design, I create integrated systems. Rapid prototyping, testing, and sensor integration are my specialties. - Electrical Know-How: Fluent in reading schematics, PCB design, and IoT experience with Arduino and Raspberry Pi. - Sensor Fusion: Proficient in complex sensor arrays, RFID, cameras, and communication protocols like Bluetooth, WIFI, and cellular. - Test Automation: I develop testing protocols and automation scripts to ensure reliability and quality. - Software Proficiency: CAD modeling (SolidWorks, SolidEdge, Fusion 360), programming (Python, C/C++, LabVIEW), and data acquisition tools. 🛠️ Onsite Rapid Prototyping: Equipped with 3D printers and electrical bench equipment for professional-quality prototypes. 🤝 Offerings: Whether you need help with product development, prototyping, or automation, let's collaborate! 🚀 Let's Tackle Your Next Project Together! Reach out, and let's bring your ideas to life. Thank you for considering me for your engineering needs!
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Python
    ESP32
    Raspberry Pi
    Arduino
    Rapid Prototyping
    3D Printing
    Mechanical Engineering
    Product Testing
    Manufacturing
    Reliability Testing
    Mechatronics
    Firmware Programming
    PCB Design
    Machine Design
  • $60 hourly
    Controls Engineer with over 15 years experience in designing industrial machinery (electrical design and software). PLC and HMI programming, integrated motion systems, robotics, vision, SCADA/Historians, Visual Studio VB, C# and SQL. Specialty in Allen Bradley products. Commercial experience in PCB design using Altium, Eagle and KiCAD.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Electrical Drawing
    PLC Programming
    Computer Vision
    Project Management
    Computer Skills
    Automation
    Autodesk AutoCAD
  • $40 hourly
    Systems engineer a MS in Mechanical Engineering with 7+ years of experience in industrial tooling and commercial product design. My primary strengths are doing mechanical designs in CAD for industrial applications, modeling and optimizing automation systems, and robotics automation. I also have experience with custom furniture, computer design, and CAD library creation. I currently work as a Module R&D engineer at Intel designing and integrating tooling for testing next-gen substrate technologies and am open to part-time work and engineering consulting jobs. Some other key projects are developing a custom CAD library for millwork applications, custom PC designs, developing control methods for industrial autonomous vehicles. I am flexible between an hourly rate and a fixed rate depending on the job.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Industrial Design
    Mechanical Engineering
    LabVIEW
    Engineering Design
    MATLAB
    Industrial Automation
    3D Printing
    Mechanical Design
    Injection Mold Design
    Product Design
    CAD
    3D Modeling
    Autodesk Inventor
  • $65 hourly
    Do you have a construction project and are looking for full MEP drawings set (Electrical, Plumbing, and HVAC) for the city permit? If yes, you are at the right place! I am a full-time MEP Engineer with over 10 years of experience specializing in building services for residential, commercial, and industrial buildings. Proficient in various standards and codes in multiple states., I ensure compliance and efficiency in all my projects. I also can provide architectural services for commercial and industrial buildings, and perform swimming pool design and review as well. 1. Plumbing and HVAC Services: - Preparation of Plumbing and HVAC drawings - HVAC Duct design and calculations - Water Supply & Drainage - Plumbing riser diagrams 2. Electrical System Design: - Designing electrical systems - Lighting & Power - Electrical load calculations and panel schedule - Lightning protection and earthing - Cable sizing - Power distribution & reticulation (schematic & line diagram drawings) - Fire detection and alarm systems I'll fully manage your project from schematic design through construction documents and final CO. Communication and client satisfaction are at the core of my values. I'll go out of my way to keep you regularly updated on the project life cycle, and ideas for cost savings measures. This ensures a complete design for no issues during construction and a quick turn around timeframe on documents.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    MEP Design
    Architecture
    Plumbing
    HVAC System Design
    Engineering & Architecture
    Construction Document Preparation
    Schematic
    Autodesk Revit
    Bluebeam Revu
    Business Development
    Mechanical, Electrical & Plumbing Systems
    Autodesk AutoCAD
    Power Distribution
    Electrical Design
  • $80 hourly
    Mr. Jon have a good experience in Civil Engineering, having completed extensive research in the application of Fiber Reinforced Polymers in the field of construction. Mr. Jon provides clients with the benefit of nearly 20 years of engineering experience in civil & structural design and engineering consultation on product development. Mr. Jon has engineered.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    CAD
    AutoCAD Civil 3D
    HVAC System Design
    MEP Design
    Structural Engineering
    Civil Engineering
  • $60 hourly
    I'm a electromechanical engineer who specializes in rapid prototyping. From CNC machining to programming, I'm your one stop solution for any problem. I have a full machine shop and electronics lab ready to bring your ideas to reality.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    JavaScript
    Computing & Networking
    PHP
    PLC Programming
    Python
    C
  • $150 hourly
    Founded MotionTech, LLC in 2006 with a focus on high performance custom motor design for aerospace, military, and specialty commercial applications. Design services include custom electric motor and generator design of numerous types (brushless dc, brush dc, permanent magnet synchronous, induction ac, and stepper). Capabilities include finite element motor performance and flux density optimization / analysis. Capability to also design and optimize fail safe brakes, tachometers, and gearboxes. Additional services include complete build-to-print manufacturing documentation packages, troubleshooting of existing motor designs, and full finite element thermal / stress analysis.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Engineering Design
    Mechanical Engineering
    Finite Element Analysis
  • $89 hourly
    I'm a full-time mid to senior electrical engineer. In my past few years, I have been worked on variety of projects. All commercial projects like Universities, Healthcare, Labs, Tenant Improvement and renovations. I have great drafting skills and familiar with NEC, IECC, ASHRAE , IES.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Autodesk Revit
    Bluebeam Revu
    IES
    National Electrical Code
    Electrical Drawing
    CAD
    Lighting Design
    Power Distribution
    Load Calculation
    Electrical Layout Design
    Electrical Design
  • $150 hourly
    Professional Electrical engineer, with experience in substation design, PLC programming, and electrical design.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    MicroStation
    Autodesk AutoCAD
    ETAP
    Electrical Layout Design
    Electrical Drawing
    Electrical Design
    PLC Programming
  • $85 hourly
    I am an Electrical Engineer with a diverse skill ranging in hardware and software design. My specialized expertise is in audio, power, and embedded systems (Arduino, AVR, and ESP32). I have proficiency in PCB design (Eagle and KiCad) and layout, capacity for reverse engineering electrical designs, and embedded programming. Professional Highlights: • My innovative designs have found their way into over 30+ music dealers, including reputable establishments like Guitar Center. • I've had the pleasure of bringing patent designs from concept to reality by providing both my hardware and software expertise. • Communication, eye for detail, and attention to budget are key to how I pursue my work. Entrepreneurial Versatility: • In addition to my engineering skillset, I also wear the hat of a small-business owner. My capabilities extend into the realms of website design, digital marketing, and budget analysis. This holistic skill set allows me to offer comprehensive solutions tailored to your unique needs. Explore My Work: • Explore my portfolio on my business website, which showcases my electronic engineering achievements: nativeaudio.com Whether you're seeking an electrical engineer with a proven track record in both hardware and software design, or you're interested in harnessing the power of an entrepreneurial spirit, I'm here to support your endeavors. Thank you for considering my profile, and I look forward to the opportunity of collaborating on exciting projects ahead.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Frequency Separation
    Microcontroller
    Internet of Things
    Multilayer PCB
    STM32
    MIDI
    ESP32
    Electronic Circuit Design
    Reverse Engineering
    C
    Arduino
    PCB Design
    Embedded System
  • $350 hourly
    As an electrical engineer, I specialize in providing design solutions for municipalities, architects, developers, and contractors. With a proven track record, my expertise spans across various projects, including the design of power distribution systems, instrumentation, and controls for water treatment plants, as well as the design of MEP (Mechanical, Electrical, and Plumbing) systems for office and residential expansions. Having successfully undertaken projects in numerous municipalities across 9 states, I bring a wealth of experience and insights to every client engagement. Let's discuss your requirements, and together we can identify the crucial elements needed to enhance the success of your upcoming project.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Ladder Logic
    Instrumentation
    Piping & Instrumentation Diagram
    Quality Control
    Power Distribution
    Photometric Analysis
    MicroStation
    Lighting Design Software
    Autodesk Revit
    AutoCAD Civil 3D
    Civil Engineering
    Mechanical Engineering
  • $35 hourly
    I’m a Electrical Engineer by profession but works for a cruise ship as electrician for 4 years and now owned a LLC and is Based is Arizona. •Can Design electrical Plans and Programming •can also work as Skilled jobs and Architectural lighting.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Active Listening
    Computer
    Engineering & Architecture
  • $75 hourly
    Innovative and resourceful Electrical Engineer with 11 years' experience in research and development ranging from Pico satellites in Low Earth Orbit (LEO) and guidance computers for interceptors, to Edge 5G infrastructure and telco power distribution. Able to handle multiple projects simultaneously while maintaining a customer-first mindset. Proven track record of problem solving and failure analysis. Ability to quickly adapt and learn new skills to overcome challenging designs.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Microcontroller Design
    Prototype Design
    Hardware Design
    Electronic Workbench
    Engineering & Architecture
  • $33 hourly
    List of Qualifications ? Lead strategist and key advisor for Operational Strategy Council of Alternative Fuels, hydrogen and ammonia ? Extensive knowledge on solar inverter utilization during peak demand and predictive maintenance modeling ? Leadership skills developed as event coordinator for youth rodeo organization for over fifteen years
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Problem Solving
    Data Analytics
    Data Analysis
  • $100 hourly
    I am a dedicated Electrical and Computer Engineer with a Bachelor's and Master's degree from the University of Arizona. My expertise spans across coding, circuit design, and PCB design, with a passion for all aspects of electrical engineering. Whether it is developing complex circuit systems or creating efficient scripts for platforms like Microsoft Excel or MATLAB. I am driven by the challenges and intricacies of the field. I am eager to contribute my skills to innovative projects and collaborate with forward-thinking teams.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Unreal Engine
    Machine Learning
    PCB Design
    Jira
    Cadence Platform
    Eagle
    Verilog
    MATLAB
    Visual Basic for Applications
    Python
    C++
    C
    Computer
    Computer Engineering
  • $50 hourly
    As a seasoned Civil and Structural Engineer with over 15 years of industry experience, I offer expertise in diverse sectors including residential, commercial, industrial, and infrastructure development. My proficiency spans structural design and analysis, construction materials, engineering services, and advanced software applications. Professional Experience and Expertise: 1. Structural Design and Analysis: Extensive experience in structural design and analysis for a wide array of projects: Residential and commercial buildings Industrial facilities and energy-producing plants (solar and nuclear) Infrastructure developments: earthworks, bridges, retaining walls, tunnels Rigging for heavy equipment and seismic-resistant structures Concrete anchors and structural foundations 2. Construction Materials Expertise: Comprehensive knowledge of construction materials: Concrete (simple and reinforced) Hot rolled steel, cold-formed steel, and composite structures Aluminum, timber, structural glass, and fiberglass-reinforced polymer 3. Additional Engineering Services Provided: Offer diverse engineering services to support project execution: Finite Element Analysis (FEA) modeling Material takeoff and bill of materials (BOM) preparation Project estimations, cost analysis, and drafting of construction drawings Site grading, drainage plans, and earthwork quantity calculations 4. Software Proficiency: Proficient in structural analysis and project management software: ROBOT, ANSYS, SAP2000, ETABS, SAFE, RFEM, IDEA STATICA, RAM CONNECTIONS, PROFIS ENGINEERING, STRUCTURAL BRIDGE, CSI BRIDGE Project management tools: Bluebeam, CYPE, Navisworks BIM modeling software: Revit, Tekla, Advance Steel, AutoCAD 2D / 3D Other tools: AutoCAD Civil 3D, COMSOL, Rocscience Suite 5. Conclusion: Known for delivering high-quality engineering solutions compliant with rigorous building codes and standards (ASCE, AISC, ACI, IBC, BS). Proven ability to manage complex challenges and collaborate effectively within multidisciplinary teams. Dedicated to ensuring structural integrity, efficiency, and safety across all projects. I am eager to contribute my expertise and commitment to engineering excellence to your upcoming projects.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Autodesk Revit
    SolidWorks
    Mechanical Engineering
    Mechanical Design
    MEP Design
    Architectural Design
    3D Design
    Structural Engineering
    AutoCAD HVAC Loads Calculations
    HVAC System Design
    Autodesk AutoCAD
    Civil Engineering
  • $15 hourly
    I'm an Electrical and Computer Engineer experienced with testing electro-mechanical systems and circuit boards. I'm also experienced with Microsoft Office tools such as Word, Excel and PowerPoint, technical test reporting/documentation procedures, data entry and analysis. I can also help with creating analog circuits drawings on Pspice OrCAD software. Creating process flow diagrams and block diagrams on Visio.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Microsoft Office
    Hardware Testing
    Quality Control
    System Testing
    Root Cause Analysis
    QA Testing
    Test Report
    Document Management System
    Email Management
    Microsoft PowerPoint
    OrCAD
    Microsoft Word
    Microsoft Excel
    Data Entry
  • $15 hourly
    OBJECTIVE To bolster my skills as an engineer and further my knowledge of electronics and programming.
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Python
    C
    C++
    Penetration Testing
    RF Design
    PCB Design
    Embedded System
    Microcontroller Programming
    Microcontroller Design
  • $30 hourly
    I currently work as an Application Engineer, where I have experience in designing both hardware and software. From this experience, it allows me to provide you with a mix of different skills that will allow for a more complete solution. I may not be the most experience developer or designer, but I am eager to help you achieve your goal and provide you will the most complete solution. Software: - Python - Visual Basic - Application Development - Graphical User Interface Development - Automation Software Development Hardware: - PCB Schematic Design - PCB Layout Design - PCB Testing/Debugging - Product Development
    vsuc_fltilesrefresh_TrophyIcon Electrical Engineering
    Hardware Prototyping
    Hardware Testing
    Hardware Design
    Software Debugging
    Visual Basic
    Python
    Software
    Multilayer PCB
    Product Development
    PCB Design
    Software Development
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by 5M+ businesses