Hire the Best Firmware Engineers in Florida

I build embedded products that ship and keep working in the field. Ten-plus years in, my firmware runs on more than 5,000 deployed units across industrial automation, robotics, consumer IoT, and edge AI. Most went out knowing they'd see heat, vibration, bad power, and users who don't read the manual. They still work. Along the way I cut an ESP32 wearable's sleep current from 80 uA to under 10 uA, ran a zero-brick OTA across a 5,000-unit fleet using secure boot and TLS, and took products through FCC and CE at accredited labs. What sets me apart from most firmware contractors is that I also own the board and the box. So when a sensor reads noisy, I know whether it's the driver, the layout, or the analog front end, because I drew all three. Manufacturability and reliability don't get bolted on at the end. They're decided on day one, while the part placement, the thermal path, and the enclosure seal are all still on the table. I design for certification from the schematic forward, not as a scramble after tooling. WHAT I DO DAY TO DAY • Firmware. C/C++ on ESP32 (ESP-IDF and Arduino), nRF52840 (nRF Connect SDK / Zephyr), STM32, and ARM Cortex-M/A, on FreeRTOS or bare-metal. BLE, Wi-Fi, sub-GHz, MQTT, and the low-power work to make a coin cell last. Plus 8+ years of embedded Linux (Yocto, device tree, U-Boot, PREEMPT-RT) and Jetson with CUDA, TensorRT, and GStreamer. • PCB design. Schematic capture and multi-layer layout, not a hand-off to someone else. I brought up a custom NVIDIA Jetson Orin carrier from a blank schematic to production, and laid out a compact wearable board (Nordic BLE, sensors, Li-Po) where every millimeter mattered. Comfortable with analog front ends, high-speed routing, power integrity, and EMC/ESD, with DfM baked in so the board is buildable at volume. • Mechanical CAD. SolidWorks (Fusion 360 too) in PDM-managed environments: parts, assemblies, and drawings for real enclosures. Injection-molding constraints, IP68 silicone overmold, gasket and tolerance work. I've carried housings from 3D-printed prototype to a tooled-mold production direction. RECENT WORK • An autonomous 4-wheel ROS 2 platform on Jetson fusing IMU, lidar, radar, and camera (NDA) • A driver-assist weather-state estimator on Jetson using Kalman multi-sensor fusion • A sealed multi-sensor wearable where I owned firmware, PCB, and the IP68 enclosure end to end (NDA) Got a product that needs to become real hardware, not a prototype on a desk? Send me the spec or a schematic and I'll tell you where the risks are. Happy to go deep work one-on-one.

[Next Availability: August 3rd] Whether you need someone to optimize an underperforming setup, build automations, troubleshoot deliverability issues, migrate platforms, or manage email operations end-to-end, I can step in and own the entire process. 💯 3+ years helping businesses turn emails into a reliable system for lead nurture and revenue. 👉 Message me start a free Email Systems Audit. MY BACKGROUND & APPROACH ⚙️ As an Engineer turned Email Marketing & Automation Specialist, I combine systems thinking, technical problem-solving, and human-centered messaging to build scalable email ecosystems that perform and improve over time. INDUSTRIES I’VE SUPPORTED ✅ Wellness & Fitness Brands ✅ Coaches & Consultants ✅ Digital Marketing Agencies ✅ Finance Education ✅ Travel, Tourism, & Outdoor Recreation RESULTS & EXPERIENCE – Increased engagement for a finance brand’s 50K+ list from 38.1% to 41.8%, achieved 50%+ open rates on 5 newsletters, and reduced bounce rates from 0.54% to 0.22% within the first 30 days – 3+ years helping clients solve complex email marketing and CRM issues, including automation failures, deliverability issues, segmentation cleanup, platform migrations, workflow rebuilds, and lifecycle optimization across ActiveCampaign, GoHighLevel, and HubSpot – 5+ years writing high-converting copy across email campaigns + sequences, landing pages, paid ads, and social media content while maintaining each brand’s voice and positioning – Generated $6K+ in 7 days from my own webinar and 6-email launch with a 19% attendee-to-buyer conversion rate – Grew my own email list organically through Instagram, Facebook, and LinkedIn with average open rates above 60% HOW WE’LL WORK TOGETHER 1️⃣ Audit: identify bottlenecks, gaps, and opportunities 2️⃣ Strategy: map lifecycle flows and key conversion points 3️⃣ Build: write, implement, and QA campaigns + automations 4️⃣ Launch: monitor engagement, deliverability, and conversion 5️⃣ Optimize: iterate based on real performance data I work best with founders and marketing teams who are looking for someone proactive, strategic, and technically capable enough to own the process from start to finish. NEXT STEP 💬 Send me a message with your current setup, goals, and biggest email marketing obstacles. From there, I can provide a complimentary Email Systems Audit to identify gaps in your lifecycle marketing, segmentation, automations, deliverability, and overall customer journey. Whether we end up working together or not, you’ll walk away with valuable insights, clear next steps, and a better understanding of what’s holding your email marketing back.

Over 8 years of experience and dozens of successful products developed for broad range of use cases. Skills that I have acquired: Low power design, IOT, PCB Design, Testing and Analysis, Debugging Code/Systems,Li-Ion/Battery Expertise, Instrumentation I am passionate about product development and creating a seamless experience both for you and the user. Please message me for any questions you might have!

I have a BSEE with an emphasis in servo controls. I have 4 decades of experience in embedded software design / development / integration and test. Embedded Linux real-time applications, kernel driver development, front-end UI development. Hardware design capabilities and extensive experience in embedded real-time product development. Raspberry Pi, Arduino, esp32, RTD custom design hardware platforms. Prototype development and detailed design documentation capability, I am an excellent mechanical designer (Solidworks) and electrical designer as well as detailed mathematical modeling, simulation and analytical analysis.

Tenacious, Charismatic, and Visionary Talent Leader seeking to partner with organizations within Tech, particuarly AI, NeuroTech, and Robotics, to oversee Talent and People functions to further scale operational efficiency and growth strategies. Adept at deriving insights to formulate, and ensure adherence to, organizational core values and competencies to establish culture. Particularly interested in Artificial Intelligence and Machine Learning. AI sits at the intersection of Psychology and Technology, and its proliferation will bring new insights to our understanding of consciousness through innovation. Autodidact with a penchant for information assimilation and dissemination.