About Us We’re a California-based residential drafting and design firm. We specialize in single-family homes, additions, remodels, ADUs, decks, conversions, and as-built permit documentation. We pride ourselves on delivering high-quality plans fast, and we work hard to make sure every project moves efficiently from design through permit without sacrificing accuracy or quality. Our clients rely on us to get things done right and on time, and we hold our collaborators to the same standard. Role Overview We are looking for a California-licensed Structural Engineer to join our network of trusted collaborators on a per-project contract basis. You will work closely with our owner and design team, providing the structural input needed to bring our plan sets across the finish line, from initial review through stamping. This role is ideal for an engineer who genuinely enjoys residential work, understands the practical realities of small project budgets, and takes pride in finding smart, code-compliant solutions rather than defaulting to over-engineered ones. What You Will Do • Review plan sets prepared by our design team and provide redlines and structural details • Prepare or supply calculation packages to support permit submittals • Stamp and sign completed plan sets for California jurisdiction submittals • Respond to plan check comments in a timely manner • Work collaboratively with our owner and draftsmen through each round of revisions • Maintain compliance with the California Building Code and applicable local amendments What We Are Looking For • Active California Structural Engineer (SE) or Civil Engineer (PE) license • Significant experience with small residential projects including single-family homes, decks, additions, remodels, room conversions, and as-built permits • A practical, solution-oriented mindset, someone who looks for ways to make a project work within real-world budget constraints without cutting corners or compromising safety • Ability to begin work within a few days of receiving a project brief and turn around redlines or revised documents within a few days of client or contractor feedback • Strong communication and collaborative working style • Familiarity with California county and city plan check processes is a plus What We Are Not Looking For We are a legitimate drafting service that does things right. We are not looking for engineers who over-engineer straightforward residential projects or who treat small jobs as low priority. If you thrive on practical problem-solving and fast turnarounds, you will fit right in here. Compensation Negotiated per project based on scope and complexity. We offer consistent project flow and a collaborative team that respects your time and expertise.

We need a structural engineer to design and stamp a foundation and retainer wall for an auto shop with 6 bay and 4 bays. The work should include accurate plans and specifications for the project. Please share relevant experience with similar commercial or industrial projects. Attached architectural civil and soil report. Need this completed as soon as possible please add timeline.

Already built website shoplifty, new supplement company needing founding member landing page. using Indiegogo collect emails, step 2 will be to open founder pricing. Run adds eventually on Meta google Instagram driving everyone to website. Ideally, I want to Create a customer list, my pixel data, analytics checkout experience. http://www,ailabsnutrition.com

I need an architect to convert hand sketches into permit-ready drawings for a residential house. The project involves working with a retired architect's input to ensure accuracy and compliance. The ideal candidate will have experience in architectural design and drafting, and be able to deliver high-quality, detailed drawings. The project is in Pennsylvania so the architect must have a license that will be honored in PA and drawings will need to be sealed for permitting.

Videographer Needed for Scrappy, Social-First Brand Content in Los Angeles About the Project Hey there! I’m John, the founder of Better Blends - a gut-friendly protein for people with sensitive digestion. I’m looking for a creative, energetic videographer based in Los Angeles who can get scrappy to help capture a large amount of authentic, social-first content for a start-up with a limited budget. This is not intended to be a highly polished commercial production. I want the content to feel spontaneous, relatable, fast-moving, and native to platforms like TikTok, Instagram Reels, and YouTube Shorts. I will be in LA at the end of the month, which is when filming would need to take place. Content I’d Like to Capture During the time, I want to capture a mix of: • Live reactions from people trying our products for the first time • Street-style interviews with people around Los Angeles • Founder-story clips and direct-to-camera videos • Lifestyle content featuring the product in different LA settings • Candid BTS moments that highlight the hustle, challenges, and excitement of growing a brand I can provide overall content ideas, but would love to work with someone who acts as a partner on this project. I would love to lean on your expertise to help ideate, and direct. Bonus if you can help identify great locations, suggest shots, and keep the filming process moving efficiently. Who We’re Looking For The ideal person: • Is based in Los Angeles • Has experience filming social media, UGC, street interviews, or founder-led content • Understands how to create strong hooks and vertical content • Is comfortable approaching and filming members of the public • Can capture high-quality video and clean audio in busy environments • Has a scrappy, collaborative, and flexible production style • Can help us capture a high volume of usable content within one to two days • Brings positive energy and can make people feel comfortable on camera • Has experience filming and editing short-form social content • Understands pacing, hooks, captions, and platform-native editing • Can turn one to two days of filming into a high volume of finished videos • Can deliver both final edited content and organized raw footage Experience working with startup, wellness, fitness, food, or consumer-product brands is a plus. Project Scope The initial project will consist of one to two full filming days around Los Angeles. Please specify whether your rate includes: • Camera and audio equipment • Basic lighting equipment • Transportation between locations • Video editing and delivery of finished clips • Delivery of organized raw footage We’re looking for someone who can manage both filming and post-production. In addition to capturing the footage, you’ll be responsible for editing it into engaging, platform-ready short-form videos for Instagram Reels, TikTok, and YouTube Shorts. The final videos should feel fast-paced, authentic, and native to social media, with strong hooks, clean captions, music where appropriate, and edits designed to hold attention. To Apply Please include: 1. A brief introduction and your location 2. Examples of social-first, street-interview, UGC, or founder-led content you’ve filmed 3. Your rate for a one-day and two-day shoot 4. What equipment and services are included in your rate 5. Whether you offer short-form video editing 6. Your availability between August 26th – 27th 7. Any experience filming live product reactions or approaching people for street interviews

Title: Engineer Needed — Drain Tile Design for Stormwater Basin (Minnesota) The Situation We are a 56-home HOA with a private dry detention basin (Outlot E, approx. 0.5 acre) that has never drained since it was built in 2001 to 2002. This approach has already been discussed with the City of Brooklyn Park and the West Mississippi Watershed Management Commission, and does not require permit submittal or approval from either. Essentially we have a bathtub with the plug in. We need drain tile or an underdrain designed to drain it. Why it doesn't drain The basin floor was built flat at elevation 841.0 ft, identical to the outlet invert. Both inlets sit slightly below the outlet (elevation 840.94 and 840.97 versus 841.0). Water entering at the inlets has no gravity path to the outlet once it's in the center of the basin. The existing outlet (SK1, 12-inch RCP skimmer) drains within one to two days near the outlet itself, but the center of the basin stays wet. 2019 site visit (American Engineering Testing): On November 13, 2019, AET performed two hand auger borings in the basin to a depth of 4.5 feet. Soils at both locations were topsoil and organic black material throughout. AET concluded the pond's soils were not suitable for infiltrating water, and that the soils between the inlet and outlet appeared unsuitable for proper sloping and drainage into the outlet. May 2026 dredge: We removed roughly 12 to 18 inches of accumulated sediment and organic material and restored the basin to its 841.0 design elevation. Standing water persisted in the center afterward. June 2026 follow-up dig: A month later, with the basin still holding water, our excavator and the City's civil engineer dug down an additional 4 feet into the center of the basin at several locations. They still encountered organic material, silt, and very fine sand throughout, confirming there is no infiltratable soil even several feet below the post-dredge grade. Grading limitation: The center of the basin is unsuitable muck to significant depth, confirmed by both AET's 2019 borings and the June 2026 follow-up dig. It cannot be graded or compacted to create positive slope. It must be removed and replaced with clean granular material wherever the design requires stable grade or bedding. Vegetation and sediment history: For roughly 23 years no vegetation was removed from the basin; cattails cut in 2017 were left to decompose in place, adding organic material to the basin floor annually. Neither inlet has sediment pretreatment, so street sediment has washed in unchecked the entire time. Scope Design a drain tile or underdrain system that collects water from the basin floor, bypasses the existing outlet structure and its catch basin entirely, and runs by gravity to a downstream storm sewer manhole. The existing outlet stays in place, functioning only as high water overflow, no longer the primary drain. Two options to evaluate: Option 1 (preferred): Excavate only deep enough to bury the pipe. Pipe must still be bedded and surrounded in clean drain rock or aggregate with filter fabric or sock, backfilled with clean sand to grade. The existing muck cannot be reused as backfill or bedding. Our concern is whether this leaves residual standing water above the pipe. We need confirmation this achieves drawdown in 5 days or less. If not, tell us. Option 2: Remove approximately 2 additional feet of material beyond Option 1 for faster drawdown, replaced with the same clean rock and sand system, if needed to hit the 5-day target. We are leaning toward Option 1 on cost, but want the engineering to confirm it will actually dry out in time. Requirements Plans must be biddable and buildable by an excavation contractor. Pipe sizing, slope, invert elevations, aggregate envelope, filter sock or fabric, and cleanout locations. Clogging is the failure mode we most need designed against. Low maintenance is a hard requirement. Our board turns over regularly and has no ongoing technical continuity. Design should be consistent with MPCA Minnesota Stormwater Manual and Brooklyn Park City Code Chapter 153 standards. Engineer of record must be a Professional Engineer licensed in the State of Minnesota. We will provide the original 2001 stormwater management plans and calculations, MFRA record drawings, the 2019 AET site visit report, and City and watershed correspondence. In your bid, please include: relevant underdrain design experience, your Minnesota PE license number, your fixed fee and timeline, and whether your fee assumes we provide an existing conditions survey.

We are Indagres, a European-American food and beverage distributor. We have been importing and distributing Spanish extra virgin olive oil in the United States since 2021. This operation will be managed logistically by our warehouse in Ft. Lauderdale, FL. The product: Premium Spanish extra virgin olive oil of the picual variety in 250ml glass bottles, sourced directly from the producer in Andalucia, Spain. What makes this opportunity attractive for a sales agent: Real quality: no BS, professionals looking for this kind of product will be interested after tasting it.  US distributor: US accounting, US bank accounts, USD invoicing. Easy interactions with US companies while sourcing exotic merchandise.   Product already in the US: no container delays, no customs risk. Orders ship from our Florida warehouse within days. High commission: being vertically integrated and present in both continents, our margins allow for higher commissions. Full back-office support: we handle logistics, compliance, and accounting. You sell, we deliver. Recurring revenue potential: olive oil is a repeat-purchase staple and we manage procurement through our own vertically integrated structure. A solid client base generates ongoing commissions. Scalable: from independent retailers to regional chains and distributors. Who we are looking for: Sales agents with B2B food and beverage sales experience. Territory: United States (nationwide). Florida would be closer to the warehouse. Target customer segments: Retailers, distributors, food service operators, restaurants. Languages preferred: English (Spanish is a plus for Hispanic-market accounts). How we support you: -Product samples shipped to your prospects. -Marketing materials. -Direct contact with our US operations team for quotes and questions. -Transparent lead registration and commission tracking. -Pre existing leads. -Product display at the Americas Food and Beverage trade how. Looking to build long term relationships with the best partners.

Photographer needed in Las Vegas, Nevada. August 28 & 29, 2026 Please see the brief attached.

Project We need a new, high-quality animated 3D character for a web-based AI assistant (a talking avatar that speaks responses in real time). We have a working version but want a fresh design with noticeably smoother, more professional animation. Design the character and rig from scratch — do not try to match any existing asset. Photoreal is not required; clean, polished, and expressive is.

We are seeking a Sales and Marketing Specialist to help us reach performance coaches and sell a book on training athlete teams. The role involves developing strategies to effectively target this niche audience and potentially sell additional products and services in the long term. The ideal candidate will have strong experience in internet marketing and sales promotion.