We, Triumph Foundation, are a nonprofit organization that people with spinal cord injuries. We host a lot of different events throughout the year and are looking for videographers who can be at the events with us to capture it all. We need videographers who have experience in: video editing, video shooting, lighting, and capture mic-ed up interviews and potentially drone shots. This is a potential opportunity to work with us on a continuous basis as we host events rather than a one-time project. We would love to see your work and show you some content we have already.

High quality behind-the-scenes video of crew as they operate remote control drone blimp. Work is on the ground only. Must provide high quality camera with mounted mic. 5 hrs on Aug. 14. 5 hrs on Aug 15.

I am an Amazon FBA seller with an established product that is already generating sales. I believe my listing has much more potential, and I am looking for an experienced Amazon listing optimization expert to help improve my conversion rate. What I need: * Review my current Amazon listing. * Analyze my competitors. * Identify what is hurting my conversion rate. * Recommend improvements for my main image, listing images, A+ Content, title, bullets, and overall product page. * Help create a strategy to increase conversions and sales. * If needed, provide direction for redesigning the listing images or work with a designer to achieve the best results. Requirements: * You must have strong experience with Amazon FBA and Amazon listing optimization. * Experience improving conversion rates for established Amazon listings is preferred. * Please share examples of listings you have optimized and explain the results you achieved. * I am looking for practical, data-driven recommendations, not generic advice.

Videographer Needed for Scrappy, Social-First Brand Content in Los Angeles About the Project Hey there! I’m John, the founder of Better Blends - a gut-friendly protein for people with sensitive digestion. I’m looking for a creative, energetic videographer based in Los Angeles who can get scrappy to help capture a large amount of authentic, social-first content for a start-up with a limited budget. This is not intended to be a highly polished commercial production. I want the content to feel spontaneous, relatable, fast-moving, and native to platforms like TikTok, Instagram Reels, and YouTube Shorts. I will be in LA at the end of the month, which is when filming would need to take place. Content I’d Like to Capture During the time, I want to capture a mix of: • Live reactions from people trying our products for the first time • Street-style interviews with people around Los Angeles • Founder-story clips and direct-to-camera videos • Lifestyle content featuring the product in different LA settings • Candid BTS moments that highlight the hustle, challenges, and excitement of growing a brand I can provide overall content ideas, but would love to work with someone who acts as a partner on this project. I would love to lean on your expertise to help ideate, and direct. Bonus if you can help identify great locations, suggest shots, and keep the filming process moving efficiently. Who We’re Looking For The ideal person: • Is based in Los Angeles • Has experience filming social media, UGC, street interviews, or founder-led content • Understands how to create strong hooks and vertical content • Is comfortable approaching and filming members of the public • Can capture high-quality video and clean audio in busy environments • Has a scrappy, collaborative, and flexible production style • Can help us capture a high volume of usable content within one to two days • Brings positive energy and can make people feel comfortable on camera • Has experience filming and editing short-form social content • Understands pacing, hooks, captions, and platform-native editing • Can turn one to two days of filming into a high volume of finished videos • Can deliver both final edited content and organized raw footage Experience working with startup, wellness, fitness, food, or consumer-product brands is a plus. Project Scope The initial project will consist of one to two full filming days around Los Angeles. Please specify whether your rate includes: • Camera and audio equipment • Basic lighting equipment • Transportation between locations • Video editing and delivery of finished clips • Delivery of organized raw footage We’re looking for someone who can manage both filming and post-production. In addition to capturing the footage, you’ll be responsible for editing it into engaging, platform-ready short-form videos for Instagram Reels, TikTok, and YouTube Shorts. The final videos should feel fast-paced, authentic, and native to social media, with strong hooks, clean captions, music where appropriate, and edits designed to hold attention. To Apply Please include: 1. A brief introduction and your location 2. Examples of social-first, street-interview, UGC, or founder-led content you’ve filmed 3. Your rate for a one-day and two-day shoot 4. What equipment and services are included in your rate 5. Whether you offer short-form video editing 6. Your availability between August 26th – 27th 7. Any experience filming live product reactions or approaching people for street interviews

Title: Engineer Needed — Drain Tile Design for Stormwater Basin (Minnesota) The Situation We are a 56-home HOA with a private dry detention basin (Outlot E, approx. 0.5 acre) that has never drained since it was built in 2001 to 2002. This approach has already been discussed with the City of Brooklyn Park and the West Mississippi Watershed Management Commission, and does not require permit submittal or approval from either. Essentially we have a bathtub with the plug in. We need drain tile or an underdrain designed to drain it. Why it doesn't drain The basin floor was built flat at elevation 841.0 ft, identical to the outlet invert. Both inlets sit slightly below the outlet (elevation 840.94 and 840.97 versus 841.0). Water entering at the inlets has no gravity path to the outlet once it's in the center of the basin. The existing outlet (SK1, 12-inch RCP skimmer) drains within one to two days near the outlet itself, but the center of the basin stays wet. 2019 site visit (American Engineering Testing): On November 13, 2019, AET performed two hand auger borings in the basin to a depth of 4.5 feet. Soils at both locations were topsoil and organic black material throughout. AET concluded the pond's soils were not suitable for infiltrating water, and that the soils between the inlet and outlet appeared unsuitable for proper sloping and drainage into the outlet. May 2026 dredge: We removed roughly 12 to 18 inches of accumulated sediment and organic material and restored the basin to its 841.0 design elevation. Standing water persisted in the center afterward. June 2026 follow-up dig: A month later, with the basin still holding water, our excavator and the City's civil engineer dug down an additional 4 feet into the center of the basin at several locations. They still encountered organic material, silt, and very fine sand throughout, confirming there is no infiltratable soil even several feet below the post-dredge grade. Grading limitation: The center of the basin is unsuitable muck to significant depth, confirmed by both AET's 2019 borings and the June 2026 follow-up dig. It cannot be graded or compacted to create positive slope. It must be removed and replaced with clean granular material wherever the design requires stable grade or bedding. Vegetation and sediment history: For roughly 23 years no vegetation was removed from the basin; cattails cut in 2017 were left to decompose in place, adding organic material to the basin floor annually. Neither inlet has sediment pretreatment, so street sediment has washed in unchecked the entire time. Scope Design a drain tile or underdrain system that collects water from the basin floor, bypasses the existing outlet structure and its catch basin entirely, and runs by gravity to a downstream storm sewer manhole. The existing outlet stays in place, functioning only as high water overflow, no longer the primary drain. Two options to evaluate: Option 1 (preferred): Excavate only deep enough to bury the pipe. Pipe must still be bedded and surrounded in clean drain rock or aggregate with filter fabric or sock, backfilled with clean sand to grade. The existing muck cannot be reused as backfill or bedding. Our concern is whether this leaves residual standing water above the pipe. We need confirmation this achieves drawdown in 5 days or less. If not, tell us. Option 2: Remove approximately 2 additional feet of material beyond Option 1 for faster drawdown, replaced with the same clean rock and sand system, if needed to hit the 5-day target. We are leaning toward Option 1 on cost, but want the engineering to confirm it will actually dry out in time. Requirements Plans must be biddable and buildable by an excavation contractor. Pipe sizing, slope, invert elevations, aggregate envelope, filter sock or fabric, and cleanout locations. Clogging is the failure mode we most need designed against. Low maintenance is a hard requirement. Our board turns over regularly and has no ongoing technical continuity. Design should be consistent with MPCA Minnesota Stormwater Manual and Brooklyn Park City Code Chapter 153 standards. Engineer of record must be a Professional Engineer licensed in the State of Minnesota. We will provide the original 2001 stormwater management plans and calculations, MFRA record drawings, the 2019 AET site visit report, and City and watershed correspondence. In your bid, please include: relevant underdrain design experience, your Minnesota PE license number, your fixed fee and timeline, and whether your fee assumes we provide an existing conditions survey.

Looking for an artist to illustrate a graphic novel I have written. The first book is 91 pages and I have at least two more planned, with each being around 90 pages each.

Compensation: Residual Monthly Payment $50 monthly residual plus $10 payment for appointments set who sit. Are you confident on the phone, money-motivated, and looking for a high-converting B2B sales gig with a massive market? We are expanding our national footprint partnering with independent automotive dealerships to deploy our proprietary structured-data and credit application growth pipelines. We are looking for sharp, driven Appointment Setters to join our team. These are virtual appointments as long as they answer our phone call you will earn the $10 for the appointment sit and if it closes you get a $50 residual every month for making one phone call where the appointment showed up and you dont have to sell anything our team of highly trained veteran closers handle the rest you just got to fill the calendar. Everything is fully transparent you can see where the client is in the sales process at all times who called, what was said and the outcome of each call. What You Will Do: You are NOT closing the full deal. Your sole objective is to make high-volume outbound B2B calls to independent car dealerships, identify the decision-maker (the person handling their dealership management software like Wayne Reeves), and book a quick 5-minute technical walkthrough appointment for our senior closers. We provide a battle-tested, low-friction script, exact dealership targeting lists, and full training. Key Responsibilities: Make outbound B2B calls to independent auto dealerships across the U.S. Navigate gatekeepers and pitch our streamlined data-routing program. Book qualified phone appointments on our senior closers' calendars. Track daily call activity and appointment metrics cleanly in our CRM. What We Are Looking For: Proven experience in phone sales, telemarketing, B2B prospecting, or appointment setting (automotive or SaaS background is a huge plus). Incredible phone presence: articulate, confident, resilient, and unshaken by rejection. Ability to follow a script naturally while thinking on your feet. Reliable computer, high-speed internet, and a quiet workspace with a professional headset. Why Join Us? Warm Market: Every single independent used car lot needs more buyers and better pipeline velocity. High Earning Potential: Lucrative bonus structure for every appointment set and closed. Full Support: You get exact scripts, data, and back-up from closers who close at a high rate. Flexible Schedule the only requirement is to be on a morning conference call at 9:30AM EST, then make calls from 10AM -12PM. If you want to make more thats up to you the more calls you make the more money you earn! How to Apply: If you're ready to crush your quotas and make serious money, reply to this post with your resume or a brief summary of your sales/phone experience, along with your phone number and the best time to reach you for a quick phone screen.

We're building a carefully selected creative network—not simply filling one freelance position. Strong candidates may receive recurring work across multiple client accounts as Daily Grind Media continues to grow. Seeking dependable local shooters for commercial brands, fitness, events, podcasts, interviews and automotive projects. Candidates should own professional equipment, have reliable transportation and be comfortable directing talent. LOCAL TO SAN DIEGO OR SOUTHERN CALIFORNIA

I’m currently transitioning my entire editing workflow from CapCut Desktop to DaVinci Resolve Studio, and I’m looking for someone experienced with both programs who can help me recreate my existing editing style. I already know exactly how I want my videos to look. I’m not looking for someone to edit my videos for me. Instead, I’m looking for someone who can hop on a live call (Zoom, Discord, Google Meet, etc.) for a couple of hours and teach me how to recreate my existing workflow inside DaVinci Resolve. What I need help with 1. Matching my CapCut color grading I already have a specific look that I use in CapCut, and I want to recreate that exact look in DaVinci Resolve. This includes: * Matching the overall color grading * Recreating the same contrast, saturation, and overall image quality * Understanding why CapCut’s footage looks different than the raw footage in DaVinci 2. Recreating CapCut’s “Adapt” look When I import footage into CapCut, it automatically applies its Adapt processing, which makes my footage look noticeably better than it does when imported directly into DaVinci Resolve. I need help figuring out how to recreate that same result inside DaVinci Resolve. 3. Recreating my typography I’ve built a typography style in CapCut that I want to recreate in DaVinci Resolve. I need help: * Matching the fonts * Animations * Motion * Timing * Overall look and feel The goal is for my typography to look as close as possible to what I’ve already built in CapCut. What I’m looking for * Someone with advanced DaVinci Resolve experience * Ideally someone familiar with CapCut Desktop as well * Comfortable teaching through a live screen-sharing session * Able to explain why things are done—not just click buttons * Patient and able to answer questions while we build my workflow together Goal By the end of the session, I want to have a DaVinci Resolve workflow that matches the editing quality I’ve already achieved in CapCut so I can eventually transition away from CapCut completely while maintaining the same visual style. If you’ve done this type of workflow before, I’d love to see examples of your work or hear about your experience.

We are seeking a skilled freelancer to assist with lead generation and appointment setting for our life insurance business. The ideal candidate will have experience in cold calling and telemarketing, with a strong ability to engage potential clients and set appointments. Attention to detail and excellent communication skills are essential. If you have a proven track record in this field, we would love to hear from you.