Hire the Best Fire Protection Engineers
in the United States

I am a motivated project manager with experience in Health Care, Industrial settings, and construction management. I focus on making projects as safety as possible while delivering quality projects that meet the customer requirements. I am registered as a Professional Engineer in CA, CO, VT, NH, VA, WI, UT, and WA. I also am an NFPA Certified Fire Protection Specialist, PMI Project Management Professional, Lean Six Sigma Green Belt, and I hold a number of National Institute for Certification in Engineering Technologies certifications in Fire Alarm Systems, Water Based System Layout, Special Hazard Systems and Fire Alarm Inspection, Testing and Maintenance. I specialize in OSHA, NFPA, ICC, UL, FM, and industry standards to ensure code compliance with local, state, and federal guidance.

One engineer. Full permit package. Architectural, structural, and MEP — all in Revit. Most projects get passed between an architect, a structural engineer, and an MEP consultant. Three timelines, three invoices, and coordination gaps that show up during plan check. I eliminate that. With 30+ years of engineering and design experience, I deliver the complete package — architectural floor plans, structural framing, and full MEP systems — from a single Revit model. No handoff gaps. No miscoordinated drawings. One set, one source. What I deliver: → ARCHITECTURAL — Floor plans, elevations, sections, reflected ceiling plans, door/window schedules, code analysis, site plans → STRUCTURAL — Foundation design, framing plans, load path analysis, shear wall layouts, structural details and calculations → MECHANICAL — HVAC system design, load calculations, duct layouts, equipment selection, exhaust systems → ELECTRICAL — Power distribution, lighting plans, panel schedules, single-line diagrams, EV provisions → PLUMBING — Domestic water, sanitary/storm drainage, gas piping, fixture schedules, riser diagrams Project types: Commercial, residential, healthcare, hospitality, industrial, mixed-use, multifamily, retail — I've engineered them all. Why clients choose me over separate consultants: - Complete permit-ready drawings from one source — faster, cheaper, zero coordination issues - I personally build every Revit model — structured grids, proper levels, clean families, ready for handoff - I know codes across U.S. states — Western, Central, and Southeast regions - 30+ years means designs that pass plan check the first time Ready to discuss your project — send me a message or schedule a call.

I’m a Fire Protection Engineer and Plumbing Designer with over 10 years of experience delivering code-compliant MEP designs for a wide range of building types across the U.S. I specialize in the design of fire protection and plumbing systems for: Commercial & retail buildings Multi-family residential (low- & high-rise) - NFPA 13 / 13R / 13D Commercial retail business occupancies One and two-family Residential homes Educational & institutional facilities Restaurant and retail buildings with mixed-use occupancies Warehouses for Storage applications Services Offered: ✅ Contract and permit-ready drawings (for construction & AHJ submittals) or simply for bid ✅ Full compliance with NFPA, IBC, ICC, and any local codes ✅ Hydraulic calculations & equipment selection and sizing ✅ MEP coordination across disciplines serving as the PFP discipline lead ✅ Construction phase support (RFIs, submittals, clarifications) ✅ Basis of design analysis for projects I have deep knowledge of state code nuances and project workflows in NY,S NYC, NJ, CA, CO, and TX, and I can confidently deliver accurate and permit/bid-ready designs for projects nationwide. If you're looking for a reliable, detail-oriented designer who understands how to meet deadlines and deliver clear, buildable sets — let's talk. 📩 Feel free to message me to discuss your project or request additional info.

John is a licensed professional engineer and is proficient in architectural engineering, fire protection engineering, mechanical engineering, and building & fire code consulting. John can deliver engineering/design for architectural projects that include architectural drawings, mechanical (HVAC) systems, electrical systems, plumbing systems, fire protection systems, and life safety drawings and solutions. John can perform structural engineering for small structures/buildings. He holds engineering licensure in the following states, as a Professional Engineer, Fire Protection Engineer, or Mechanical Engineer: AZ, AR, CA (FP), CA (ME), CO, CT, DC, FL, GA, HI (ME), IN, IA, KY, ME, MD, MA (FP), MA (ME), MI, MN, MO, MT, NM, NV (FP), NV (ME), NH, NM, NJ, NY, NC, OH, OK, OR, PA, RI, TX, VA, & WA He possesses 22 ICC building code certifications in the accessibility, building, electrical, energy, fire, mechanical, and plumbing codes as an inspector and as a plans examiner. John is an expert in the International Building Code, the International Fire Code, The International Mechanical Code, the International Plumbing Code, the International Energy Conservation Code, and the Accessibility Code ICC A117.1. John possesses the ICC S-1, Structural Steel and Bolting Special Inspector certification. John is renowned as an overall building code expert. John is a registered Special Inspector in the City of Philadelphia and owns and operates a Special Inspection Agency registered and licensed in the City of Philadelphia. John also owns and operates a Third Party Building Code Enforcement Agency that is licensed in the Commonwealth of Pennsylvania to perform construction code enforcement and administration. He is an expert in NFPA codes and standards and how they might be applicable to a project. John is an elite engineering professional with both specialized and multi-disciplinary engineering knowledge that can positively contribute to unique engineering needs.

Good Day Licensed Contractors, Sub-Contractors, Builders, Buyers & Real Estate Investors, I am a Civil Engineer and Professional Senior Construction Estimator with 20+ years of experience in Quantity Takeoffs, Material Takeoffs, and Construction Cost Estimation for Residential, Commercial, Industrial, and Apartment Building projects. I have successfully completed 2000+ ConstructConnect bidding projects ranging from $200K to $50M+ in construction value, delivering accurate, bid-winning, and contractor-ready proposals. Construction Estimator providing accurate Material Takeoffs and Cost Estimation for residential and commercial projects. Bluebeam | PlanSwift | Bid-Ready Excel | Fast Turnaround. I help General Contractors, Subcontractors, Builders, Developers, Architects, and Material Suppliers win bids by providing accurate, detailed, and contractor-ready estimates using industry-standard takeoff methods and real-time pricing data for USA, Canada, Australia, and UK construction markets. 🔑 Core Services • Construction Cost Estimation • Quantity Takeoffs (QTO) • Material Takeoffs (MTO) • ConstructConnect Project Bid Assistance • Bid Estimation & Budgeting • Trade-Wise BOQs • Project Scheduling Support 🏗️ CSI Division Expertise I provide trade-specific material takeoffs and cost estimates across all major CSI divisions, including: Concrete, Masonry, Metals, Lumber & Wood Framing, Thermal & Moisture Protection, Doors & Windows, Paint Takeoff, Finishes, Specialties, Plumbing, HVAC, Electrical, Earthwork, and Exterior Improvements. 🎯 Why Clients Hire Me ✔ 20+ Years of Construction Estimating Experience ✔ 2000+ Completed Estimation & ConstructConnect Bid Projects ✔ Experience with Bid-Winning Proposals for Commercial & Residential Projects ✔ Fast Response (0–15 Minutes) ✔ Accurate Pricing for USA, Canada, Australia & UK Projects ✔ On-Time Delivery with Clear Excel BOQs ✔ Residential, Commercial & Industrial Expertise My focus is to deliver precise material quantities, reliable pricing, and clean bid-ready estimates so you can submit competitive proposals with confidence. 📩 Let’s Get Started Send your drawings (PDF) and project scope, and I will provide a clear, accurate, and professional construction estimate—with revisions as needed.G

Hello, I am currently a plumbing and fire protection engineer with 5 years of working experience. Whether you are looking for plumbing design, calculations for hospitals or highrise buildings or drafting, I can help. I also have 6 years of experience using autocad and revit so any drafting work is also best. ~Regular communication is important ~Have a full understanding of the scope of work