Hire the Best Electrical Drawing Specialists in Texas

Hi, I am an Electrical Engineer and Owner of MS Design Services LLC with extensive years of experience in project management, controls automation systems, MEP Electrical Engineering, Power Distribution systems and Network System design. • Michigan Technological University - BS Degree in Electrical Engineering • Professional Engineer (Electrical) - PE 89468 Texas. • Designed various electrical residential and commercial building projects include service feeder sizing, electrical schematics, single line diagrams, plan layouts, electrical power panels, lighting, surge protection, and electrical calculations per NEC and local code requirements. • Engineered and designed electrical systems for Industrial, Commercial and Residential including low and medium voltage systems, panelboard sizes, load calculations, conduct and cable tray schedules and sizing, switchgear, circuit breakers, transformers, panelboard schedules, automatic transfer switches with batteries, generators and solar systems. • Developed, designed and reviewed engineering systems, control panel designs, perform load calculations, develop specifications, estimates and proposals for major electrical equipment including Electrical and Control Systems designs from PLCs and HMIs including BOMs and panel layouts, transformers, low and medium voltage switchgear, MCCs, motors, VFDs, electrical schematics and single line diagrams, panelboard schedules, power distribution and solar/battery/generator permit packages. • Ensure these systems meet the requirements of the Specifications, IEEE, NFPA, NRLT, NEC, UL and local codes specifically strong knowledge and experience in UL508A and NFPA 70, 70E, 70B, 79 standards. Designed electrical systems and specified devices & component. • Experienced MEP Electrical Engineer with a strong background in designing, reviewing, and engineering electrical systems for commercial, residential, and industrial projects. Skilled in power distribution, lighting, panelboards, low-voltage systems, and ensuring compliance with local building codes and standards. Designed and reviewed electrical systems including LV & MV distribution, lighting, emergency power, and grounding systems in alignment with project specifications and standards (NEC, IEC, IEEE). Prepared load schedules, single-line diagrams, and material submittals for client and consultant approval. Evaluated project requirements, prepared BOQ/BOMs, and assisted in cost estimation and procurement processes.

We’re a family-owned and family-operated CAD drafting team based in Central Texas, providing professional remote drafting support for architectural, engineering, and construction projects across the United States. We keep our workflow personal, organized, and hands-on. Every project is coordinated closely within our team, with clear communication, efficient production, and senior-level review before final delivery. Our goal is simple: provide accurate, clean, well-organized drawings with reliable turnaround and professional communication. We support projects of all sizes — from homeowners, contractors, and builders to architects, engineers, designers, and small businesses. How Our Team Works Our team is structured to keep each project moving efficiently while maintaining quality and consistency. Lead Designer / Senior Drafter — 19+ years of experience Oversees each project, reviews drawing quality, checks coordination, and makes sure the final deliverables are accurate, clean, and professionally presented. Junior CAD / Revit Drafters Support production based on project type, including architectural drafting, engineering support, as-builts, redlines, 2D CAD work, and 3D modeling. Project Coordinator — Cinthya Helps manage communication, scheduling, project organization, and client updates so the process stays clear from start to finish. This setup allows us to provide the attention and accountability of a hands-on family team while still supporting both one-time projects and ongoing drafting needs. Services We Provide • Architectural, engineering, and general CAD drafting • PDF, scan, markup, and hand-sketch conversion to clean CAD drawings • Redlines, revisions, drawing cleanup, and plan set production • As-built drawings and existing condition documentation • Floor plans, elevations, sections, site plans, details, and layouts • Permit-ready drawing packages when design information and requirements are provided • 2D drafting, 3D modeling, and visualization support • SketchUp modeling and rendering support • Residential, commercial, infrastructure, and engineering drafting support Software Experience • AutoCAD • Revit • MicroStation V8i • SketchUp • Bluebeam • Adobe PDF workflows Rates & Minimums Standard drafting rate: $45/hr Minimum project fee: $250 Fixed-price options are also available depending on the project scope, deliverables, and timeline. Why Clients Work With Us • Family-owned and family-operated drafting team • Hands-on project communication and coordination • 25+ years of combined drafting and design experience • Senior-level review before final delivery • Clean, organized, construction-focused drawings • Reliable support for one-time projects and long-term drafting needs • Flexible workflow using sketches, redlines, scans, PDFs, markups, or design guidelines • Bilingual support in English and Spanish • Fully remote support for clients across the United States Whether you need as-built drawings, permit-ready plans, CAD conversions, redline updates, engineering drafting support, or 3D modeling, our team can help turn your project information into clean, professional CAD deliverables.

Freelance AutoCAD Designer & Drafter | Architectural & Commercial Projects I am a freelance AutoCAD designer and drafter with extensive experience producing clear, accurate, and construction-ready drawings for architectural, commercial, and industrial projects. My focus is on drafting execution—turning concepts, markups, and redlines into precise documents that are easy to build from. I work daily in AutoCAD and am highly proficient in scaled drawing production and full PaperSpace workflows, including title blocks, viewports, annotation scaling, x‑references, and disciplined layer standards. I deliver clean layouts, plans, elevations, sections, and details suitable for permitting, construction, and as-built documentation. My background includes long-term work within the engineering and construction industry, which gives me a strong understanding of design intent without approaching projects from an overly engineering‑heavy perspective. This allows me to support architects, contractors, developers, and consultants who need dependable drafting support without unnecessary complexity. I have experience supporting architectural and commercial spaces, including coordination of floor plans, layouts, and construction details, as well as working alongside teams using 3D models to ensure alignment between models and 2D drawings. One of my key strengths is construction experience. I have seen designs through installation and field execution, worked directly with construction teams, and updated drawings based on real-world conditions. I draft with constructability in mind—helping reduce RFIs, rework, and confusion in the field. Services Offered AutoCAD drafting for architectural & commercial projects Scaled plans, sections, elevations, and details PaperSpace setup & drawing standards Permit, construction, and as-built drawings 3D model coordination support Revisions, redlines, and overflow drafting support If you’re looking for a reliable freelance AutoCAD drafter who understands both design intent and construction reality, I’m ready to support your project efficiently and professionally.

Hello there, my name is Chris E. I am very interested and excited in working with you on your cad work/project . I have/own a registered business here in Texas, Ehrlish Drafting and Design LLC. To start off I have an Associates degree in Applied ScienceAutocad. Plus I have been working full time as a mechanic and electrical designer for past 10 years. I also have some experience in doing civil drafting for submittal purposes to customers and clients. I also love to do Floor Plan layout drawings for house and remodel of houses. I use Autocad every day and love the program. I do structural layouts and some electrical work and even details on components. I am very detailed oriented in making sure my drawings are as accurate as possible. I produce working electrical and structural drawings in cad form for shop purposes as well. I can also do working BOM on drawings and help get you estimates on jobs to see exactly how much it will cost you to do a job. I have all the Autocad software to do all the changes that you are needing. I really strive for great looking drawings that are as realistic as possible. Let me know if you have any questions about me or what I can do. Feel free to message me on your project and I can give you a free estimate on price for your job and go over any questions that you may have. Thank you for your time and I look forward to hearing from you. Thanks, Christoher Ehrlish ehrlishdraftinganddesign@gmail.com

Electrical Engineering for Buildings, Wireless Telecom sites, Solar Energy, EV Chargers, Data Centers, Crypto-Mining, Hospitals and Infrastructure. Serving clients though out the USA + International jobs. Owner of Rivera Engineering LLC, a state of the art EE firm based in the cloud, with US and global reach. José enjoys leading, and collaborating with his top notch international staff. :-) He is a full time Top 1% Rated Plus consultant that really can take care of your job! Not a drained moonlighter... Fully backed up by a $2,000,000 professional liability (E&O) insurance. See our Upwork reviews and success rate! A leader in Power Engineering for Wireless Telecom sites, Solar Energy and EV Chargers. Has delivered thousands of projects, and calculations for all the major cellular phone carriers in the US (AT&T, Sprint, T-Mobile, Verizon). And many project reviews (and stamps) for Solar and EV Chargers installers nationwide. PE licensed in: AL, AZ, CA, CO, CT, DC, DE, FL, GA, HI, ID, LA, IL, KS, LA, MA, MD, MI, MN, MO, MS, NC, NJ, NM, NV, NY, OK, OR, PA, TN, TX, UT, VA, WA. And adding more as needed. :-) Offers Electrical Engineering supervision (Review and Stamp) for Permit and Construction packages; Buildings, Solar Energy, Telecommunication sites and Infrastructure. MEP team building and leadership. José has evaluated and analyzed electrical building systems. He has provided expert (forensic) opinions related to the cause and extent of damage and prepared recommended remedial actions for property owners, municipalities, insurance carriers, and attorneys. José's project experience includes commercial and residential facilities that have been subject to damage related to installation, construction, design defects, fires and hurricanes. José has performed engineering evaluations following historical events such as Hurricane Harvey and Hurricane Michael. He is an avid enthusiast of energy-efficiency design practices with focus on renewable energy. And a sought out expert IECC-Title 24 practitioner. Has performed many technical reviews of construction documents, building and site surveys, inspections, electrical infrastructure evaluations and systems (LEED) commissioning. Breadth of project experience in city infrastructure, High and Medium Voltage substations, correctional, municipal, aviation, education, healthcare, commercial, industrial and residential facilities. Had the adventure of working in Saudi Arabia; as an advocate to the Kingdom during construction and commissioning of electrical industrial infrastructure. He has a successful career based on work ethics, integrity, team-work and reliability. Computer literate with strong AutoCAD knowledge. And plenty of experience with EE analysis and MS productivity software. Bilingual, English and Spanish. SERVICES Electrical Engineering / AutoCAD / Title 24 / IECC / Fault Calcs / Arc Flash / One line / NEC loads Systems Commissioning / Electronic Security / Forensics / Assessments / EE for Crypto Mining 3rd party Inspections / Engineering Studies / Disaster Recovery / FEMA subcontracting Lighting Design / LEED Certification support / Electrical Testing / Predominant Use Alternative Energy Consulting; Solar and Wind / Power Engineering for Telecom / EE for EV Chargers PE licensed in: Alabama, Arizona, California, Colorado, District of Columbia, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Kansas, Louisiana, Maryland, Massachusetts, Michigan, Missouri, Mississippi, New Jersey, North Carolina, Nevada, New Mexico, Nevada, New York, Oklahoma, Oregon, Pennsylvania, Tennessee, Texas, Utah, Virginia, Washington. See more info at: www|riveramep|com

I am a B.S.E.E mixed electrical / controls / electronics / software engineer with experience in PLC Programming, Oil & Gas, Industrial Controls, HVAC & Building Automation, IoT, Raspberry Pi, Arduino, Xbee, Node.js, and general controls & project engineering. I have worked in both start-ups and large companies managing multiple different types tasks. From design & commission on turnkey industrial control systems, to designing Xbee Sensor shield prototypes in EAGLE, to writing internal productivity web apps in VueJS, to writing data protocol (modbus, roclink, abb) drivers from scratch, to panel wiring/design & drawings; I can deliver & support your job throughout its life-cycle. I will offer you better value, quick phone support, & a passion for engineering that I hope is apparent!